1. Calculate the molar mass of sugar (sucrose: C12H22O1 )


2. What is the percent composition of carbon in sucrose?


3. What is the percent composition of hydrogen in sucrose?


4. What is the percent composition of oxygen in sucrose?

Answers

Answer 1

Answer:

1. 342g/mol2. 42.1%3. 6.43%4. 51.46%

Explanation:

Greetings !!!

First let's define the meaning of molecular mass.

Molar mass M is the mass of a chemical compound divided by its amount-of-substance measured in moles. It is defined as MB = m/nB, where m is the total mass of a sample of pure substance and nB is the amount of substance B given in moles. The definition applies to pure substance.

For the first question

solution

The atomic mass of carbon(C)= 12

The atomic mass of Hydrogen(H)= 1

The atomic mass of Oxygen(O)= 16

Molecular mass of sucrose(Table sugar)C₁₂H₂₂O₁₁=

12×(The atomic mass of carbon(C)) + 11×(The atomic mass of Hydrogen(H)) + 11×(The atomic mass of Oxygen(O))

Molecular mass of sucrose = 12×12+22×1+11×16

=144 + 22 + 176

=342g/mol

Secondly, when we look at percent composition first let's define it :-

Percent CompositionFind the molar mass of all the elements in the compound in grams per mole. Find the molecular mass of the entire compound.Divide the component's molar mass by the entire molecular mass.You will now have a number between 0 and 1. Multiply it by 100% to get percent composition.

So, let's work on the questions

%Compositions

Carbon= 144/342×100 = 42.1%

Hydrogen = 22/342×100= 6.43%

Oxygen = 176/342×100= 51.46%

And to be more sure add those percent values

Thus, 42.1%+6.43%+51.46%= 99.99%

If you have any questions and unclear ideas tag it on comments

Hope it helps!!


Related Questions

a) Explain why the acetamido group is an ortho, para-directing group. Why should it be less effective in activating the aromatic ring toward further substitution than an amino group? 6) 0-Nitroaniline is more soluble in ethanol than p-nitroaniline. Propose a flow scheme by which a pure sample of 0-nitroaniline might be obtained from this reaction'

Answers

The acetamido group (-NHCOCH3) is an ortho, para-directing group because it can donate electron density to the aromatic ring via resonance. The acetamido group is less effective in activating the aromatic ring towards further substitution compared to an amino group (-NH2) due to the presence of the carbonyl group (C=O) in the acetamido group.

1. The acetamido group (-NHCOCH3) is an ortho, para-directing group because it has a lone pair of electrons on the nitrogen atom that can participate in resonance with the aromatic ring. This resonance effect stabilizes the positive charge developed during the electrophilic aromatic substitution reaction on the ortho and para positions relative to the acetamido group.

2. The acetamido group is less effective in activating the aromatic ring towards further substitution compared to an amino group (-NH2) due to the presence of the carbonyl group (C=O) in the acetamido group. The carbonyl group has a higher electron-withdrawing inductive effect, which weakens the electron-donating capability of the nitrogen atom. Consequently, the overall activating effect of the acetamido group is reduced compared to the amino group, which does not have an electron-withdrawing group attached to it.

In summary, the acetamido group is an ortho, para-directing group due to resonance involving the lone pair on the nitrogen atom, but it is less effective in activating the aromatic ring than an amino group because of the electron-withdrawing effect of the carbonyl group present in the acetamido group.

For more questions on acetamido group:

https://brainly.com/question/14911696

#SPJ11

The acetamido group is an ortho, para-directing group because it contains a lone pair of electrons that can interact with the pi-electron system of the aromatic ring through resonance.

This interaction results in a partial positive charge on the ortho and para positions, making these positions more attractive to electrophilic attack. However, the acetamido group is less effective in activating the aromatic ring towards further substitution than an amino group because the lone pair of electrons on the nitrogen of the acetamido group is partially delocalized into the carbonyl group, reducing its availability for resonance with the aromatic ring.

To obtain a pure sample of o-nitroaniline from a mixture with p-nitroaniline using ethanol as the solvent, one possible flow scheme is:

1. Dissolve the mixture of o-nitroaniline and p-nitroaniline in ethanol.

2. Add a strong base, such as sodium hydroxide, to the solution to convert the nitro groups to their corresponding sodium salts, which are more soluble in ethanol.

3. Acidify the solution with hydrochloric acid to protonate the amino groups, which will precipitate out the nitroanilines as their hydrochloride salts.

4. Collect the precipitate by filtration and wash with cold ethanol to remove any impurities.

5. Recrystallize the o-nitroaniline hydrochloride from hot ethanol, which will selectively dissolve the o-nitroaniline hydrochloride due to its higher solubility, leaving the p-nitroaniline hydrochloride behind as a solid.

6. Treat the o-nitroaniline hydrochloride with a base, such as sodium hydroxide, to regenerate o-nitroaniline in its free base form.

7. Finally, purify the o-nitroaniline by recrystallization from a suitable solvent, such as ethanol or acetone.

Learn more about acetamido group here :

brainly.com/question/14911696

#SPJ11

dimerization is a side reaction that occurs during the preparation of a grignard reagent. propose a mechanism that accounts for the formation of the dimer.

Answers

Answer;Dimerization is a common side reaction that occurs during the preparation of a Grignard reagent. The formation of a dimer is a result of the reaction between two equivalents of the Grignard reagent, which can occur via a radical mechanism:

1. Initiation: The reaction begins with the formation of a radical species by the reaction between the Grignard reagent and a trace amount of oxygen or moisture in the solvent:

   RMgX + O2 (or H2O) → R• + MgXOH (or MgX2)

2. Propagation: The radical species reacts with another molecule of the Grignard reagent to form a new radical species, which then reacts with a molecule of the solvent:

   R• + RMgX → R-R + MgX•

   MgX• + 2R-MgX → MgX-R + R-MgX-R

3. Termination: The radical species produced in step 2 can react with other molecules of the Grignard reagent or with other radicals to form larger oligomers, such as tetramers and higher.

   2R• → R-R

   R• + R-R → R-R-R

   R• + R-R-R → R-R-R-R

Overall, this mechanism accounts for the formation of the dimer (R-R) during the preparation of a Grignard reagent. The formation of the dimer can reduce the yield of the desired Grignard reagent, so care must be taken to minimize the amount of oxygen and moisture present in the reaction.

learn more about Dimerization

https://brainly.com/question/29517510?referrer=searchResults

#SPJ11

express the rate of the reaction in terms of the rate of concentration change for each of the three species involved.

Answers

The rate of the reaction can be expressed in terms of the rate of concentration change for each of the three species involved by considering the stoichiometry of the reaction.

How to express the rate of the reaction in terms of concentration change for each species involved?

In order to express the rate of a reaction in terms of the rate of concentration change for each of the three species involved, we need to consider the balanced chemical equation for the reaction. Let's say we have a reaction represented by the equation:

aA + bB → cC + dD + eE

where A, B, C, D, and E represent different species and a, b, c, d, and e represent their respective stoichiometric coefficients. The rate of the reaction can then be expressed as:

Rate of reaction = (-1/a)(Δ[A]/Δt) = (-1/b)(Δ[B]/Δt) = (1/c)(Δ[C]/Δt) = (1/d)(Δ[D]/Δt) = (1/e)(Δ[E]/Δt)

This means that the rate of the reaction is directly proportional to the rate of concentration change for each species, with the proportionality constant being the reciprocal of their respective stoichiometric coefficients.

Learn more about concentration

brainly.com/question/18247103

#SPJ11

Carolina Chem Kits": Types of Chemical Reactions Post-lab Questions Part 1. Balance each of the following equations and classify each of he reactions by type Equation Type of Reaction 1. KCIO, KCI O 4. 5. 6. Na + KI + Cu + GH+ Zn + 02 → Na2O2 Pb(NO3)2 → KNO; + Polz AgNO, Cu(NO3)2 + Ag O2 CO2 + H2O + heat HCI ZnCl2 + H2

Answers

In this post-lab question set, we are given several chemical equations and are asked to balance each equation and classify the reaction type.

The first equation represents the decomposition of potassium chlorate into potassium chloride and oxygen gas.

The second equation represents the single replacement reaction of lead nitrate with potassium iodide to form lead iodide and potassium nitrate.

The third equation represents the double replacement reaction of silver nitrate and copper(II) nitrate with solid silver oxide to form solid silver chloride and copper(II) oxide.

The fourth equation represents the combustion of carbon dioxide and water in the presence of heat to form carbonic acid.

The fifth equation represents the reaction between hydrochloric acid and zinc chloride to form hydrogen gas and zinc chloride.

By balancing and classifying each equation, we can better understand the types of chemical reactions that occur in different scenarios.

To know more about the post-lab question set refer here :

https://brainly.com/question/31425298#

#SPJ11

Determine the ksp of Cd(OH)2. The (molar) solubility of cd(oh)2 is 1.2 x 10-6.

Answers

The solubility product constant, Ksp, is the product of the equilibrium concentrations of the ions raised to the power of their stoichiometric coefficients, for a given equilibrium reaction. For the dissolution of Cd(OH)₂ in water, the equilibrium reaction is:

Cd(OH)₂ (s) ⇌ Cd²⁺ (aq) + 2OH⁻ (aq)

The expression for the solubility product constant of Cd(OH)₂ is:

Ksp = [Cd²⁺][OH⁻]²

where [Cd²⁺] is the concentration of Cd²⁺ ions in solution, and [OH⁻] is the concentration of OH⁻ ions in solution.

Since Cd(OH)₂ is a sparingly soluble salt, we can assume that the concentration of Cd²⁺ ions in solution is equal to the solubility of Cd(OH)₂, which is given as 1.2 x 10⁻⁶ M.

Using this value and the stoichiometry of the reaction, we can determine the concentration of OH⁻ ions in solution:

[OH⁻] = 2[Cd(OH)₂] = 2(1.2 x 10⁻⁶ M) = 2.4 x 10⁻⁶ M

Substituting these values into the expression for Ksp gives:

Ksp = [Cd²⁺][OH⁻]² = (1.2 x 10⁻⁶ M)(2.4 x 10⁻⁶ M)² = 6.91 x 10⁻²⁰

Therefore, the solubility product constant, Ksp, of Cd(OH)2 is 6.91 x 10⁻²⁰.

To know more about refer solubility product constant here

brainly.com/question/1419865#

#SPJ11

a rigid container holds 3.50 mol of gas at a pressure of 3.00 atm and a temperature of 200°Ca) What is the container's volume?
b) What is the pressure if the temperature is raised to 140° C.
c) 0.020 mol of gas undergoes the isothermal process. What is the final temperature in degree C and the final volume V2?

Answers

A. The volume of the container is 45.3 L

B. The pressure, given that the temperature is raised to 140° C is 2.62 atm

Ci. The final temperature is 200°C

Cii. The final volume is 0.26 L

A. How do i determine the volume of the container?

The volume of the container can be obtained as illustrated below:

Number of mole (n) = 3.5 molesPressure (P) = 3 atmTemperature (T) = 200 °C = 200 + 273 = 473 KGas constant (R) = 0.0821 atm.L/molKVolume of container (V) =?

PV = nRT

3 × V = 3.5 × 0.0821 × 473

Divide both sides by 3

V = (3.5 × 0.0821 × 473) / 3

Volume of container = 45.3 L

B. How do i determine the pressure?

The pressure at 140° C can be obtain as follow:

Initial temperature (T₁) = 200 °C = 200 + 273 = 473 KInitial pressure (P₁) = 3 atmVolume = Constant (Since the container is rigid)New temperature (T₂) = 140 °C = 140 + 273 = 413 KNew pressure (P₂) = ?

P₁ / T₁ = P₂/ T₂

3 / 473 = P₂ / 413

Cross multiply

473 × P₂ = 3 × 413

Divide both sides by 473

P₂ = (3 × 413) / 473

P₂ = 2.62 atm

Thus, the pressure is 2.62 atm

C. How do i determine the final temperature and volume?

i. For final temperature

In isothermal process, temperature is constant. Thus, the final temperature is the same as the initial temperature i.e 200°C

ii. For final volume

Number of mole (n) = 0.020 molePressure (P) = 3 atmTemperature (T) = 200 °C = 200 + 273 = 473 KGas constant (R) = 0.0821 atm.L/molKFinal volume (V) =?

PV = nRT

3 × V = 0.02 × 0.0821 × 473

Divide both sides by 3

V = (0.02 × 0.0821 × 473) / 3

Final volume = 0.26 L

Learn more about volume:

https://brainly.com/question/21838343

#SPJ4

Synthesis of Salicylic Acid Lab Mass of beaker (step 1): 106.79 grams Mass of methyl salicylate and beaker: 1115 Mass of methyl salicylate added (step 1): 4.71 grams Mass of beaker (step 14): 103.95 grams Mass of beaker and salicylate acid (step 15): 107.11 grams Mass of salicylic acid: 3.16 gram:s Description of salicylic acid: General Observations during the Experiment: grams Post Lab Questions: 1. What is the actual yield of salicylic acid? 2. Calculate the theoretical yield using your mass of methyl salicylate added. 3. Calculate the percent yield. 4. What covalent bonds in methyl salicylate and water were broken during the reaction? What bonds were formed? 5. List 3 potential sources of error in today's experiment.

Answers

1. The actual yield of salicylic acid is 3.16 grams. 2. The theoretical yield is 4.71 grams. 3. The percent yield is 67.02%. 4. Covalent bonds in methyl salicylate were broken. 5. Three potential sources of error in the experiment are measurement error, incomplete reactions, and loss of product.

1. To calculate the actual yield of salicylic acid, you need to subtract the initial mass of the beaker from the final mass of the beaker and salicylic acid

Actual Yield = Mass of beaker and salicylic acid (step 15) - Mass of beaker (step 14)

= 107.11 grams - 103.95 grams

= 3.16 grams

2. The theoretical yield can be calculated using the mass of methyl salicylate added. Since methyl salicylate has a 1:1 stoichiometric ratio with salicylic acid, the mass of salicylic acid formed should be equal to the mass of methyl salicylate added

Theoretical Yield = Mass of methyl salicylate added (step 1)

= 4.71 grams

3. The percent yield can be calculated using the actual yield and theoretical yield

Percent Yield = (Actual Yield / Theoretical Yield) x 100

= (3.16 grams / 4.71 grams) x 100

= 67.02%

4. During the reaction, covalent bonds in methyl salicylate were broken, including the ester bond (C=O) and the C-O bond between the methyl group and the phenol ring. New covalent bonds were formed in salicylic acid, including the carboxylic acid group (C=O) and the C-OH bond.

5. Three potential sources of error in the experiment could be

Measurement errors in weighing the substances, leading to inaccurate mass values.

Incomplete reaction or side reactions, resulting in lower yield of salicylic acid.

Loss of product during handling or transferring, leading to a lower actual yield.

To know more about Covalent bonds here

https://brainly.com/question/26080276

#SPJ4

Consider the exothermic combustion of coal. Which of the following could increase the rate of reaction?
a. using smaller pieces of coal
b. increasing the concentration of oxygen
c. lowering the temperature
d. both (a) and (b) are correct
e. choices (a), (b) and (c) are all correct

Answers

Using smaller pieces of coal and increasing the concentration of oxygen can both increase the rate of the exothermic combustion reaction of coal. The correct answer is d. both (a) and (b) are correct.

When coal is broken down into smaller pieces, it increases the surface area available for the reaction. This allows for more contact between the coal and oxygen, promoting faster and more efficient combustion. The increased surface area facilitates the exposure of more coal particles to the surrounding oxygen, leading to a higher frequency of successful collisions between reactant molecules and an overall increase in the reaction rate. Similarly, increasing the concentration of oxygen provides a higher number of oxygen molecules available for the combustion reaction. This higher concentration promotes more frequent collisions between oxygen and coal particles, resulting in an accelerated reaction rate. Lowering the temperature, as mentioned in option (c), would not increase the rate of the reaction. Generally, increasing the temperature enhances reaction rates for exothermic reactions. Therefore, the correct answer is option d, as both using smaller pieces of coal (increased surface area) and increasing the concentration of oxygen can effectively increase the rate of the exothermic combustion of coal.

Learn more about Combustion reaction here:

https://brainly.com/question/14335621

#SPJ11

a monoprotic weak acid, when dissolved in water, is 0.92 issociated and produces a solution with ph = 3.42. calculate ka for the acid.

Answers

The acid dissociation constant, Ka, for the weak acid is 1.57 × 10^-5.

The dissociation of a weak monoprotic acid can be represented by the following chemical equation:
HA ⇌ H+ + A-.

The acid dissociation constant, Ka, is a measure of the strength of the acid and can be calculated using the expression
Ka = [H+][A-]/[HA],
where [H+] is the concentration of the hydronium ion,
[A-] is the concentration of the conjugate base, and
[HA] is the concentration of the weak acid.

Given that the weak acid is 0.92% dissociated, we can assume that
[HA] ≈ [HA]0,
where [HA]0 is the initial concentration of the weak acid.

Therefore, [A-] ≈ [H+], and we can write Ka = ([H+])([H+])/([HA]0 - [H+]).

We can use the pH of the solution to calculate the concentration of the hydronium ion, [H+], using the expression pH = -log[H+].

Substituting the given values into the equation, we get:
3.42 = -log[H+]
[H+] = 3.98 × 10^-4 M

Now we can calculate Ka using the expression Ka = ([H+])([H+])/([HA]0 - [H+]). Since [HA]0 - [H+] ≈ [HA]0, we can assume that [HA]0 = [HA] + [A-] ≈ [HA]. Thus, we get:

Ka = (3.98 × 10^-4)^2 / (0.0092 - 3.98 × 10^-4) = 1.57 × 10^-5

To know more about "Ka" refer here:

https://brainly.com/question/3223615#

#SPJ11

For the following question, consider the following equation: 2Mg+O2→2MgO
The number of moles of oxygen gas needed to react with 4.0 moles of Mg is
A) 1.0 mole
B) 2.0 moles
C) 3.0 moles
D) 4.0 moles
E) 6.0 moles

Answers

The number of moles of oxygen gas needed to react with 4.0 moles of Mg is 2.0 moles.


Equation: 2Mg + O2 → 2MgO

Step 1: Identify the mole ratio between Mg and O2 from the equation. For every 2 moles of Mg, there is 1 mole of O2 needed (2Mg:1O2).

Step 2: You have 4.0 moles of Mg. To find the number of moles of O2 needed, we can set up a proportion based on the mole ratio:

(4.0 moles Mg) / (x moles O2) = (2 moles Mg) / (1 mole O2)

Step 3: Solve for x moles O2 by cross-multiplying:

4.0 moles Mg * 1 mole O2 = 2 moles Mg * x moles O2
4.0 moles O2 = 2x moles O2

Step 4: Divide both sides by 2 to get the number of moles of O2:

x = 4.0 moles O2 / 2
x = 2.0 moles O2

The number of moles of oxygen gas needed to react with 4.0 moles of Mg is 2.0 moles (Option B).

learn more about moles here

https://brainly.com/question/15356425

#SPJ11

A gas sample occupies 8.20 L under a pressure of 800. torr at 350. K. At what temperature will it occupy 3.60 L at the same pressure?
-119 oC
300 K
408 K
300 oC
770 K

Answers

Considering the Charles' law, at a temperature of 153.66 K the gas will occupy 3.60 L at the same pressure.

Definition of Charles' law

Charles' law establishes the relationship between the volume and the temperature of a gas sample at constant pressure and establishes that when the temperature is increased the volume of the gas also increases and that when it cools the volume decreases. That is, the volume is directly proportional to the temperature of the gas.

Mathematically it can be expressed as:

V÷T=k

where

V is the volume.T is the temperature.k is a constant.

Analyzing an initial state 1 and a final state 2, it is fulfilled:

V₁÷T₁=V₂÷T₂

Temperature in this case

In this case, you know:

V₁= 8.20 LT₁= 350 KV₂= 3.60 LT₂= ?

Replacing in Charles' law:

8.20 L÷ 350 K= 3.60 L÷T₂

Solving:

(8.20 L÷ 350 K)×T₂= 3.60 L

T₂= 3.60 L÷(8.20 L÷ 350 K)

T₂= 153.66 K

Finally, the temperature will be 153.66 K.

Learn more about Charles' law:

https://brainly.com/question/4147359

#SPJ4

How will the rate of p4 appearance change (qualitatively) as the reaction progresses?

Answers

The appearance rate of P4, which is the chemical formula for phosphorus, is likely to change as the reaction progresses.

The exact nature of this change will depend on the specifics of the reaction, but there are a few general trends that may be observed:

Initially, the rate of P4 appearance may be high, as reactants are being converted into products at a rapid pace.

As the reaction progresses and the concentration of reactants decreases, the rate of P4 appearance may slow down.

Depending on the reaction conditions, the rate of P4 appearance may fluctuate over time.

This could be due to changes in temperature, pressure, or the concentrations of reactants and/or products.

In some cases, the rate of P4 appearance may be slower at the beginning of the reaction, but increase as the reaction progresses.

This could be due to the accumulation of certain intermediates or the presence of catalysts that enhance the reaction rate.

Overall, it's difficult to predict exactly how the rate of P4 appearance will change as a reaction progresses without knowing more information about the reaction itself.

However, by monitoring the rate of P4 appearance over time, it may be possible to gain insights into the kinetics and mechanisms of the reaction.

To know more about chemical formula refer here

https://brainly.com/question/31713710#

#SPJ11

How many moles of acetyl coenzyme A are needed for the synthesis of one mole of palmetic acid? Enter Your Answer: How many moles of NADPH are needed for the synthesis of one mole of palmetic acid? Enter Your Answer:

Answers

For the synthesis of one mole of palmitic acid, eight moles of acetyl coenzyme A (acetyl-CoA) are needed. This is because palmitic acid is a saturated fatty acid with 16 carbon atoms, and each acetyl-CoA molecule contributes two carbon atoms to the chain.

In addition to acetyl-CoA, 14 moles of NADPH (reduced nicotinamide adenine dinucleotide phosphate) are needed for the synthesis of one mole of palmitic acid. NADPH is required for the reduction of the carbonyl groups in the fatty acid synthesis pathway, which ultimately leads to the formation of saturated fatty acid.
To synthesize one mole of palmitic acid, you require 7 moles of acetyl coenzyme A. Palmitic acid consists of 16 carbon atoms, and acetyl coenzyme A contributes 2 carbon atoms per molecule. The first acetyl CoA forms the base, and then you need 6 more to elongate the chain.

The elongation process requires 2 moles of NADPH for each addition of 2 carbon atoms, and since you have 6 elongation steps, the total moles of NADPH needed is 6 x 2 = 12, plus 2 moles of NADPH for the initial reduction of the first acetyl CoA, making it 14 moles in total.

To know more about palmitic acid visit:-

https://brainly.com/question/29770129

#SPJ11

calculate the thermal conductivity of argon (cv,m σ = 0.36 nm2 ) at 298 k.

Answers

The thermal conductivity of argon at 298K is 0.017 W/mK.

The thermal conductivity of argon (k) at 298K can be calculated using the following formula:

[tex]k = (1/3) * Cv,m * v * lambda[/tex]

At 298K, Cv,m of argon is 12.5 J/mol*K and the average velocity of argon molecules is 322 m/s. The mean free path of argon molecules can be calculated using the formula:

[tex]lambda = (1/(2*(\sqrt{(2)}*sigma^2)*N/V)) * (1/100)[/tex]

where sigma is diameter of the argon molecule, N is the number of molecules per unit volume, and V is the molar volume of argon.

Using given value of sigma and the ideal gas law, we can calculate N/V and V as [tex]2.6910^25\ m^-3[/tex] and[tex]22.410^{-3} m^3[/tex]/mol, respectively.

Plugging in the values, we get k = 0.017 W/mK.

To know more about thermal conductivity, here

brainly.com/question/7643131

#SPJ4

X-rays with a wavelength of 0.085 nm diffract from a crystal in which the spacing between atomic planes is 0.213 nm. How many diffraction orders are observed?

Answers

A wavelength of 0.085 nm diffract from a crystal in which the spacing between atomic planes is 0.213 nm, the number of diffraction are 5.

Bragg's law states that, "When the X-ray is incident onto a crystal surface, its angle of incidence, θ, will reflect with the same angle of scattering, θ".

Use Bragg's law to calculate the order's of diffraction.

According to Bragg's law, the condition for diffraction is,

nλ = 2d sinθ

⇒ n = (2d sinθ) / λ

Substitute the values,

n = (2 × 0.213 nm × sin 90°) / 0.085 nm

  = 5

Therefore, the number of diffraction patterns are observed are 5.

Learn more about Bragg's law from the link given below.

https://brainly.com/question/14617319

#SPJ4

Using Hess' Law, Calculate the standard heat of formation of copper(1) oxide given the following data: CuO(s) Cu(s)+ O2(g) AH 157.3 kJ/mol 4CuO(s) 2Cu₂ O(s) + O2(g) AH° 292.0 kJ/mol

Answers

The standard heat of formation of copper(I) oxide (Cu₂O) is -11.3 kJ/mol using Hess's Law.

Using Hess's Law, we can calculate the standard heat of formation of copper(I) oxide (Cu₂O) with the given data.

1. We first need to modify the given reactions to obtain the desired formation reaction:

CuO(s) → Cu(s) + 0.5 O2(g) | ΔH = 157.3 kJ/mol (multiply by -1) 2

CuO(s) → Cu₂O(s) + 0.5 O2(g) | ΔH = 146.0 kJ/mol (half of the second reaction)

2. Add the modified reactions:

CuO(s) → Cu(s) + 0.5 O2(g) | ΔH = -157.3 kJ/mol

2 CuO(s) → Cu₂O(s) + 0.5 O2(g) | ΔH = 146.0 kJ/mol

---------------------------

CuO(s) + Cu(s) → Cu₂O(s) | ΔH = -11.3 kJ/mol (net reaction)

Learn more about Hess's law at https://brainly.com/question/31966104

#SPJ11

Write a nuclear equation for the indicated decay of each of the following nuclides. Express your answer as a nuclear equation.
Part a.) Pt?170 (alpha)
Part b.) Th?230 (alpha)
part c.) Pb?214 (beta)
part d.) N?13 (positron emission)
part e.) Cr?51 (electron capture)

Answers

The atomic number of the nucleus decreases by one, while the mass number remains the same.

For part c, Pb?214 → Bi?214 + e-

This is a beta decay process, where a neutron in the nucleus of Pb?214 decays into a proton and an electron (beta particle). The proton stays in the nucleus, increasing its atomic number by one, while the electron is emitted from the nucleus. As a result, Pb?214 transforms into Bi?214.

For part e, Cr?51 + e- → V?51

This is an electron capture process, where an electron from the inner shell of the atom is captured by the nucleus. In this case, an electron from the K shell is captured by the nucleus of Cr?51, which transforms it into V?51. The captured electron combines with a proton in the nucleus, forming a neutron and a neutrino, which are emitted from the nucleus. As a result, the atomic number of the nucleus decreases by one, while the mass number remains the same.

To know more about proton refer to

https://brainly.com/question/30895149

#SPJ11

which of the following substances would you predict to have the highest δhvap? xe sif4 h2o o2 cl2

Answers

When considering the heat of vaporization (δhvap) of substances, we must look at the intermolecular forces present in each substance. Intermolecular forces are the forces of attraction or repulsion between molecules, and they affect how tightly packed the molecules are and how much energy is required to separate them.

In general, the stronger the intermolecular forces, the higher the δhvap of the substance. Out of the given options, we can eliminate xenon (Xe) and oxygen (O2) as they are noble gases and do not have strong intermolecular forces.
Sulfur tetrafluoride (SiF4) is a polar molecule, meaning it has a partial positive and negative charge on different ends. This dipole moment causes the molecules to attract each other, resulting in a higher δhvap than Xe and O2.
Water (H2O) also has a dipole moment due to its polar nature, but it also has hydrogen bonding, a strong intermolecular force that arises when hydrogen atoms are bonded to highly electronegative atoms like oxygen or nitrogen. This makes water the substance with the highest δhvap out of the options given.
Chlorine (Cl2) is a nonpolar molecule, so it has weak intermolecular forces. Therefore, it has a lower δhvap than both SiF4 and H2O. water (H2O) would be predicted to have the highest δhvap out of the given substances due to its strong hydrogen bonding and polar nature.

Learn more about heat of vaporization here ;

https://brainly.com/question/11084176

#SPJ11

Select all that apply. Which factors(s) affect the separation of a sample in GC? a) Stationary phase b) column length c) temperature of column d) flow rate of carrier ga

Answers

The separation of a sample in GC is affected by multiple factors. These include the stationary phase, column length, temperature of the column, and flow rate of carrier gas.                                                                                                                                                                                    

The stationary phase plays a crucial role in determining the selectivity and retention of the analytes. The length of the column affects the time taken for separation. Temperature also plays a significant role in GC as it affects the volatility of analytes and influences the separation efficiency. Flow rate of carrier gas impacts the retention time and peak shape. Hence, all the factors mentioned above should be considered while optimizing GC conditions for efficient separation of a sample.
Temperature of the column controls the rate of sample movement and separation efficiency.

Learn more about GC here:
https://brainly.com/question/30882433

#SPJ11

look at the balanced equation for the production of ammonia: n2(g) 3h2(g) -> 2nh3(g) suppose you had 6 moles of nitrogen gas, but only 3 moles of hydrogen gas. how many moles of ammonia gas could be made? explain your answer.

Answers

If we have 6 moles of nitrogen gas and 3 moles of hydrogen gas, the limiting reactant is hydrogen gas, and we can produce 3 moles of ammonia gas according to the stoichiometry of the balanced equation.

what is ammonia gas?

The gas ammonia ([tex]NH_3[/tex]) is colourless and has a strong odour. It is employed in the creation of fertiliser, refrigeration, dyes, and cleaning products. It is very soluble in water and, when inhaled in large doses, can be poisonous and unpleasant.

The balanced equation for the production of ammonia is: N₂(g) + 3H₂(g) → 2NH₃(g)

According to the balanced equation, the stoichiometric ratio between nitrogen gas (N₂) and ammonia gas (NH₃) is 1:2. This means that for every mole of nitrogen gas reacted, two moles of ammonia gas are produced.

Given that we have 6 moles of nitrogen gas and 3 moles of hydrogen gas, we can determine the limiting reactant by comparing the stoichiometric ratios. Since the stoichiometric ratio of nitrogen gas to ammonia gas is 1:2, we can only produce as much ammonia gas as the limiting reactant allows.

In this case, the limiting reactant is hydrogen gas (H₂) because we have fewer moles of it compared to the stoichiometric ratio. Since the ratio of nitrogen gas to hydrogen gas is 6:3, we can only produce half as many moles of ammonia gas. Therefore, we can produce 3 moles of ammonia gas.

To learn more about ammonia gas from the given link .

https://brainly.in/question/45201801

#SPJ4

Estimate the minimum uncertainty in the speed of an electron that can move along the carbon skeleton of a conjugated polyene of length 2. 0 nm

Answers

The minimum uncertainty in the speed of the electron is approximately 39.1 km/s.

The uncertainty in the speed (Δv) of the electron can be estimated using the formula:

Δv = h / (4π × m × Δx)

where; h is the Planck constant, m is the mass of the electron, and Δx is the uncertainty in position (given as the length of the polyene).

The length of the polyene is 2.0 nm, which is equivalent to:

2.0 × [tex]10^{(-9)[/tex] meters.

The mass of an electron = 9.10938356 × [tex]10^{(-31)[/tex] kilograms

The Planck constant = 6.62607015 × [tex]10^{(-34)[/tex] joule-seconds.

Plugging in these values, we have

Δv = (6.62607015 × [tex]10^{(-34)[/tex] J·s) / (4π × (9.10938356 × [tex]10^{(-31)[/tex] kg) × (2.0 × [tex]10^{(-9)[/tex] m)).

= 3.91 × [tex]10^7[/tex] is the speed of the electron.

To learn more about electron follow the link:

https://brainly.com/question/18367541

#SPJ4

The complete question is:

Estimate the minimum uncertainty in the speed of an electron that can move along the carbon skeleton of a conjugated polyene (such as β-carotene) of length 2.0 nm. Report the answer in km/s.

What energy (in eV) is required to remove the remaining electron from a singly ionized helium atom, He+(Z = 2)?a.3.40 eVb.54.4 eVc.27.2 eVd.13.6 eVe.76.9 eV

Answers

The energy required to remove the remaining electron from a singly ionized helium atom is option b 54.4 eV.

The energy required to remove the remaining electron from a singly ionized helium atom, He⁺(Z = 2) can be calculated using the formula:

E = -Rhc(Zeff)²/n²

where R is the Rydberg constant, h is Planck's constant, c is the speed of light, Zeff is the effective nuclear charge, and n is the principal quantum number.

For He⁺(Z = 2), Zeff is equal to 1, since there is only one electron remaining after ionization. The energy required to remove this electron can be found by setting n = 1 in the above equation.

Thus, E = -Rhc(Zeff)²/n² = -13.6 eV * (2²/1²) = -54.4 eV.

Since energy cannot be negative, the absolute value of this answer is 54.4 eV. Therefore, the answer is (b) 54.4 eV.

To know more about the helium atom refer here :

https://brainly.com/question/4945478#

#SPJ11

a force f = bx3 acts in the x direction, where the value of b is 3.9 n/m3. how much work is done by this force in moving an object from x = 0.0 m to x = 2.5 m?

Answers

The work done by the force F = b * x³ in moving an object from x = 0.0 m to x = 2.5 m is 15.36 J.

To calculate the work done, we need to integrate the force over the displacement.

The formula for work done in one dimension is given by:

W = ∫(F dx)

Substituting the given force, F = b * x³, we have:

W = ∫(b * x³ dx)

Integrating with respect to x, we get:

W = (b/4) * x⁴ + C

Evaluating the limits of integration, from x = 0.0 m to x = 2.5 m, we have:

W = (b/4) * (2.5)⁴ - (b/4) * (0.0)⁴

Since the initial position is x = 0.0 m, the term (b/4) * (0.0)⁴ becomes zero. Therefore, we are left with:

W = (b/4) * (2.5)⁴

Substituting the value of b = 3.9 N/m³, we get:

W = (3.9/4) * (2.5)⁴

 = 15.36 J

To know more about force, refer here:

https://brainly.com/question/13482747#

#SPJ11

In a reaction, 50 ml of sodium hydroxide (NaOH) of 0. 1 M is mixed with 50


ml of hydrochloric acid(HCl) of 0. 1 M and the temperature increase was


recorded to be 4. 5 degrees. If the same reaction was repeated but 100ml


of NaOH was used instead of 50 ml, what will be the effect of this change


on the temperature change?



The increase will be higher than 4. 5 ⁰ C


The decrease will be less than 4. 5 ⁰ C


The increase will be 4. 5 ⁰ C


We can't tell since the initial and final temperatures aren't given.



(please explain how the answer was found)

Answers

Increasing the volume of sodium hydroxide from 50 ml to 100 ml in a reaction with hydrochloric acid will result in a temperature increase higher than 4.5 °C.

To determine the effect of changing the volume of sodium hydroxide (NaOH) on the temperature change, we need to consider the stoichiometry of the reaction and the amount of heat generated or absorbed during the reaction.

Assuming the reaction between NaOH and HCl is exothermic (it releases heat), the heat generated during the reaction can be calculated using the equation:

q = n × ΔH

Where:

q is the heat generated or absorbed (in joules)

n is the number of moles of the limiting reactant

ΔH is the enthalpy change per mole of the reaction

In this case, the limiting reactant is either NaOH or HCl, depending on the stoichiometry of the reaction. If the reaction is 1:1 between NaOH and HCl, then both are limiting reactants.

Given that the initial concentrations of NaOH and HCl are both 0.1 M and the volumes are 50 ml each, we can calculate the number of moles of NaOH and HCl:

moles of NaOH = 0.1 mol/L × 0.05 L = 0.005 mol

moles of HCl = 0.1 mol/L × 0.05 L = 0.005 mol

Since the reaction is balanced and stoichiometric, both 0.005 moles of NaOH and 0.005 moles of HCl will react completely.

Now, let's consider the heat generated during the reaction with the given data:

q1 = n × ΔH1

Where:

q1 is the heat generated or absorbed in the first reaction

ΔH1 is the enthalpy change per mole of the reaction in the first reaction

We don't have the values of ΔH1 or the initial and final temperatures, so we cannot determine the exact heat generated or absorbed in the first reaction.

However, we can make an assumption that the reaction is the same in both cases, and the enthalpy change per mole (ΔH) is constant. Therefore, we can assume that the heat generated or absorbed in the first reaction is the same as the heat generated or absorbed in the second reaction.

Now, let's consider the second reaction where the volume of NaOH is doubled (100 ml):

moles of NaOH = 0.1 mol/L × 0.1 L = 0.01 mol

moles of HCl = 0.1 mol/L × 0.05 L = 0.005 mol

Again, assuming stoichiometric and complete reaction, 0.005 moles of HCl will react completely with 0.005 moles of NaOH. The remaining 0.005 moles of NaOH will react with an additional 0.005 moles of HCl.

Since the heat generated or absorbed is assumed to be the same as in the first reaction, we can conclude that the heat generated in the second reaction will be higher than in the first reaction. Therefore, the temperature increase will be higher than 4.5 °C.

Therefore, the correct answer is: The increase will be higher than 4.5 °C.

Learn more about Exothermic reaction here: brainly.com/question/28546817

#SPJ11

Which pathway leads to the formation of dicarboxylic acids as an end product? A. Beta-oxidation B. Pentose Phosphate, oxidative phase D. Omega-oxidation E. Kreb's Cycle C. Alpha-oxidation

Answers

The pathway that leads to the formation of dicarboxylic acids as an end product is Omega-oxidation. The correct option is D.

Omega-oxidation is a metabolic pathway that occurs in the endoplasmic reticulum of liver and kidney cells, and it involves the oxidation of fatty acids with the terminal methyl group (omega carbon) as the site of oxidation. During omega-oxidation, the terminal methyl group is first hydroxylated to form a hydroxymethyl group, which is then oxidized to a carboxyl group.

As a result of this process, dicarboxylic acids such as adipic acid, suberic acid, and sebacic acid are formed as the end products. These dicarboxylic acids can be further metabolized to enter the Krebs cycle or be used for energy production through beta-oxidation.

In contrast, beta-oxidation leads to the formation of acetyl-CoA as the end product, while the Krebs cycle produces ATP and carbon dioxide. Alpha-oxidation and the oxidative phase of the pentose phosphate pathway do not lead to the formation of dicarboxylic acids.

In summary, omega-oxidation is the pathway that leads to the formation of dicarboxylic acids as an end product through the oxidation of fatty acids with the terminal methyl group as the site of oxidation. Therefore, the correct option is D.

To know more about dicarboxylic acids refer here:

https://brainly.com/question/31608806#

#SPJ11

the solubility of caf2 (molar mass = 78.1 g/mol) at 18°c is 1.6 mg caf2 per 100 ml solution. calculate the ksp for caf2 under these conditions.

Answers

The Ksp for CaF2 at 18°C under the given conditions is 3.44 x 10^-11.

To calculate the Ksp for CaF2 under the given conditions, we need to use the equation:
Ksp = [Ca2+][F-]2
We know that the solubility of CaF2 at 18°C is 1.6 mg/100 mL solution. First, we need to convert this to moles/Liter.
1.6 mg = 1.6 x 10^-3 g
1 mole CaF2 = 78.1 g
1.6 x 10^-3 g CaF2 = (1.6 x 10^-3 g / 78.1 g/mol) moles CaF2
= 2.05 x 10^-5 moles CaF2
100 mL = 0.1 L
Concentration of CaF2 = (2.05 x 10^-5 moles / 0.1 L) = 2.05 x 10^-4 M
[Ca2+] = 2.05 x 10^-4 M
[F-] = 2.05 x 10^-4 M
Ksp = [Ca2+][F-]2
Ksp = (2.05 x 10^-4 M)(2.05 x 10^-4 M)2
Ksp = 8.36 x 10^-12
1. Convert solubility from mg to moles:
Solubility = (1.6 mg CaF2 / 100 mL) * (1 g / 1000 mg) * (1 mol / 78.1 g) = 2.05 x 10^-5 mol/100 mL.
2. Convert solubility to molarity:
Molarity = (2.05 x 10^-5 mol) / 0.1 L = 2.05 x 10^-4 M.
3. Write the balanced dissolution reaction for CaF2:
CaF2 (s) ⇌ Ca2+ (aq) + 2F- (aq).
4. Calculate the equilibrium concentrations:
[Ca2+] = 2.05 x 10^-4 M (from solubility).
[F-] = 2 * 2.05 x 10^-4 M = 4.10 x 10^-4 M.
5. Use the equilibrium concentrations to find the Ksp:
Ksp = [Ca2+] * [F-]^2 = (2.05 x 10^-4) * (4.10 x 10^-4)^2 = 3.44 x 10^-11.

To know more about Ksp visit :-

https://brainly.com/question/11294542

#SPJ11

When a snake kills a shrew, the shrew is the ________________. Group of answer choices Host Parasite Prey Predator

Answers

When a snake kills a shrew, the shrew is the prey. In ecological terms, the relationship between a snake and a shrew can be classified as a predator-prey relationship. The snake, as the predator, hunts and captures the shrew, which acts as the prey. The snake feeds on the shrew as a source of food.

Prey refers to an organism that is hunted and consumed by another organism, known as the predator. In this scenario, the shrew is the organism being hunted and killed by the snake. The snake, as the predator, relies on the shrew as a food source for its survival and energy needs. This predator-prey interaction is a common occurrence in nature, playing a crucial role in regulating populations and maintaining the balance within ecosystems.

 To  learn  more  about predator click here:brainly.com/question/28871161

#SPJ11

The balanced half-reaction in which ethanol, CH3CH2OH, is oxidized to ethanoic acid, CH3COOH. is a____process. 1) six-electron. 2) twelve-electron. 3) four-electron. 4) two-electron. 5) three-electron.

Answers

The balanced half-reaction in which ethanol is oxidized to ethanoic acid is a two-electron process.

To determine the number of electrons involved in the oxidation process, we need to look at the balanced half-reaction. The half-reaction for the oxidation of ethanol to ethanoic acid is:

CH₃CH₂OH → CH₃COOH + 2e⁻

This half-reaction shows that two electrons are involved in the oxidation process. For every ethanol molecule that is oxidized, two electrons are transferred to the oxidizing agent.


Ethanol can be oxidized to ethanoic acid by a variety of oxidizing agents, including potassium permanganate, potassium dichromate, and acidic or basic solutions of potassium or sodium dichromate. During the oxidation process, ethanol loses electrons and is converted to ethanoic acid. The balanced half-reaction for the oxidation of ethanol to ethanoic acid shows that two electrons are transferred during the process. This means that the reaction is a two-electron process. The oxidation of ethanol to ethanoic acid is an important reaction in organic chemistry and is used in the production of acetic acid, which is an important industrial chemical.

To know more about oxidizing agent, visit:

https://brainly.com/question/10547418

#SPJ11

Please show all steps! Thanks!
A piano tuner uses a tuning fork that emits sound with a frequency of 440 Hz. Calculate the wavelength of the sound from this tuning fork and the time the sound takes to travel 10.0 m across a large room. Take the speed of sound in air to be 343 m/s.

Answers

The wavelength is 0.7795 m and the sound takes 0.0291 s to travel 10.0 m across the room.

To calculate the wavelength of the sound emitted by the tuning fork, we can use the formula:

wavelength = speed of sound / frequency

Given that the frequency of the tuning fork is 440 Hz and the speed of sound in air is 343 m/s, we can substitute these values into the formula:

wavelength = 343 m/s / 440 Hz = 0.7795 m

Therefore, the wavelength of the sound from the tuning fork is approximately 0.7795 meters.

To calculate the time it takes for the sound to travel 10.0 meters across the room, we can use the formula:

time = distance / speed

Given that the distance is 10.0 meters and the speed of sound is 343 m/s, we can substitute these values into the formula:

time = 10.0 m / 343 m/s = 0.0291 s

Therefore, the sound takes approximately 0.0291 seconds to travel 10.0 meters across the room.

For more such questions on wavelength, click on:

https://brainly.com/question/28995449

#SPJ11

The wavelength is 0.7795 m and the sound takes 0.0291 s to travel 10.0 m across the room.

To calculate the wavelength of the sound emitted by the tuning fork, we can use the formula:wavelength = speed of sound / frequencyGiven that the frequency of the tuning fork is 440 Hz and the speed of sound in air is 343 m/s, we can substitute these values into the formula:wavelength = 343 m/s / 440 Hz = 0.7795 mTherefore, the wavelength of the sound from the tuning fork is approximately 0.7795 meters.

To calculate the time it takes for the sound to travel 10.0 meters across the room, we can use the formula:time = distance / speedGiven that the distance is 10.0 meters and the speed of sound is 343 m/s, we can substitute these values into the formula:time = 10.0 m / 343 m/s = 0.0291 sTherefore, the sound takes approximately 0.0291 seconds to travel 10.0 meters across the room.

Learn more about wavelength here :

brainly.com/question/28995449#SPJ11

#SPJ11

draw the lewis structure for sf4. what is the hybridization and formal charge on the sulfur? a. sp3, 1 b. sp3d2, 0 c. sp3d, 1 d. sp3d, 0 e. sp3, 0

Answers

The Lewis structure for SF4 shows that there are four single bonds between sulfur and fluorine atoms, with one lone pair of electrons on sulfur. This gives a total of five electron pairs around sulfur, indicating that the hybridization of the sulfur is d. sp3d, 0 formal charges on the sulfur.

                    ..

F  --------------S--------------  F

                /       \

            F             F

For sulfur in SF4, the valence electrons are 6 (from the periodic table), there is one lone pair of electrons on sulfur, and each fluorine atom contributes one bonding electron pair.

The unbonded electrons =  2

The bonded electrons = 8

To calculate the formal charge on sulfur, we can use the equation:

Formal charge = valence electrons - unbonded electrons - 1/2(bonding electrons)

Putting the values in the equation;

6 - 2 - 8/2 = x

6 - 2 - 2 = +4

Therefore, the formal charge on sulfur is 0.

So, the correct answer is (d) sp3d, 0.

To know more about formal charges, click below.

https://brainly.com/question/11723212

#SPJ11

Other Questions
TIMED!! PLEASE HELP!!WILL give brainliest Jana has $10. She wants to buy a bottle of nail polish for $9.50. The sales tax is 7%. Does she have enough money? I had a truly amazing and learning filled summer vacation. it was amazing because i _____________. Though I could not spend it with my friends, still enjoyed it. What statement about Adolf hitler's rise to the power are true what is 3 + 7 -90+180 Micki runs 3 miles during each track practice. Thegraph below represents the total number of milesshe has run, d, in terms of the number of trackpractices she has attended, t.HELP ME PLS ASAP PLS PLZ I NEED FOR TODAY AS IN 2/18/21! PLZZZZ y=-4x +9 Identify the rate of change cul es el siguiente nmero de -10 How do I write the sum of 1 and q as an algebraic expression? Solve using substitution. x 6y = 8 x + 6y = 16 please help imma fail Im stuck I need help please. I HV NEVER BEEN SO CONFUSED BEFORE 1. What is the circumference of the circlebelow(18 mC 113 mA 36 mB 56.5 mD 324 m The side lengths of a triangle are 9, 12, and 18. Is this a right triangle? O A. Yes, because 92 + 122 standard used determine whether an expert's scientific testimony is admissible In the second sentence of the second paragraph, the repetition of the word things primarily serves to? During the summer, Mr. Brust does a lot of napping (and snoring)! In a typical nap, Mr. Brust will snore on average 320 times (or the ratio of naps to snores is 1 nap : 320 snores). Find the total number of times Mr. Brust snored last summer during naps in July and August if he took one nap everyday. Which equation has no solution?3k - 20 = 128+15g=15+8g12x+6=3(4x+2)9 +7 =6- 2+ If ur really good at spanish please help meheres the assignment and the reading that goes w it(more of the reading is posted on another question) BRAINLIEST TO WHOEVER ANSWERS FIRST! A painter is placing a ladder to reach the third story window, which is 39 feet above the ground andmakes an angle with the ground of 80.How far out from the building does the base of the ladder need to be positioned? Round your answer tothe nearest tenth.The base of the ladder needs to be positionedfeet out from the building.