A 58.0 g sample of unknown composition was carefully analyzed and found to consist of 24.3 g of carbon, 3.072 grams of hydrogen, 5.406 g of oxygen, and the remainder of nitrogen.

Sulfuric acid reacts with the mineral ilmenite to form titanium(IV) oxide (TiO2), a white material. The reaction has a Percentage of yield 76.3%.

The amount of product actually made compared with the maximum calculated yield is called the percentage yield.

Actual yield/Theoretical yield*100

FeTiO3 + H2SO4 -> TiO2 + FeSO4 + H2O

Molar mass of FeTiO3 = 152 g / mole

Number of mole of FeTiO3 = Mass / molar mass

= 8.65 x 10³ / 152

= 56907 g / mole

By solving the equation

Number of moles of TiO2 = 56907 g / mole

Mass of TiO2 = molar mass x number of moles

= 80 x 56907

= 4552560 = 4.55 x 10³

Percent yield = 3.47 x 10³ / 4.55 x 10³ x 100

 = 0.763 x 100

 = 76.3 %

Thus, Titanium(IV) oxide (TiO2) is a white substance produced by the action of sulfuric acid on the mineral ilmenite. The percent yield of the reaction is 76.3%.

To know more about Percentage of yield refer to:

https://brainly.com/question/17042787

#SPJ1

The process in which a solution of known concentration is used to determine the concentration of an unknown solution is called titration

Titration is a method used to determine the concentration of an unknown solution by measuring the volume of a solution of known concentration that is needed to react with a specific amount of the unknown solution.

There are different types of titrations, each with its own specific endpoint, depending on the type of reaction taking place. For example, acid-base titrations use an indicator to signal the endpoint, while redox titrations use an electrode or a color change to signal the endpoint.

Therefore, Titrations are commonly used in laboratories to determine the concentration of a wide variety of substances, such as acids, bases, and electrolytes in a solution. They are also used in industries such as food, pharmaceuticals and environmental analysis.

Learn more about titration from

https://brainly.com/question/15170788

#SPJ1

The following are the balanced chemical equations: 1). 2N2O5 -> 2N2O4 + 1O2, 2). 2KNO3 -> 2KNO2 + O2, 3). NH4NO2 -> N2 + 2H2O, 4).2O3 -> 3O2, 5). Zn + 2AgCl -> ZnCl2 + 2Ag, 6). 2NaOH + H2SO4 -> Na2SO4 + 2H2O.

Synthesis, breakdown, single replacement, doubling replacement, and combustion are the five main categories of chemical reactions. One material is created from several reactants in a composition reaction.

A chemical equation is a symbol- and formula-based valid expression of a chemical reaction, with the reactant entities given on the left side and the resultant entities given on the right. Examples are NaOH+HClNaCl+H2O.

To know more about Equations visit:

https://brainly.com/question/25824281

#SPJ1

Avogadro's constant says that 1 mole of any atom [tex]6.022*10^2^3[/tex] contains atoms. In this case, you have [tex]1.99 * 10^2^4[/tex] atoms:

[tex]1.99*10^2^4/6.022*10^2^3=3.3[/tex]

1 mole of p4010 = 283.889

So [tex]1.99* 10^2^4[/tex] molecules mass is

[tex]283.889*3.3=936.833 gram[/tex]

Therefore, the mass in grams, of 1.99 x 1024 molecules of P4010 is 936.833 grams.

Learn more about molecular mass and mole here:https://brainly.com/question/24191825

The rate of change of the volume with respect to time is 32π cm³/min. To find the rate of change of the volume with respect to time, we need to take the derivative of the volume function with respect to time, which is denoted by dV/dt.

The formula for the volume of a cylinder is V = πr²2h, where r is the radius and h is the height. To find the rate of change of the volume with respect to time, we need to find the derivative of V with respect to t.

Let's call h(t) the height of the cylinder at time t, so it is increasing at a rate of 2 cm/min.

dV/dt = d/dt (πr²h(t)) = πr²2 dh/dt = π(4²)(2) = 32π cm³/min

When the height is 10 cm, the rate of change of the volume with respect to time is 32π cm³/min.

Learn more about volume, here https://brainly.com/question/13338592

#SPJ4

According to the claim, one benefit of food processing is its capacity to lessen the growth of dangerous germs, which in turn prolongs the shelf life of food.

Thus, Extended Shelf Life: Perishable goods can have their shelf lives extended by using food processing procedures like canning, freezing, or adding preservatives. Customers may now preserve and enjoy these items for longer periods of time without worrying about them going bad.

Improved Food Safety: Food processing aids in lowering the risk of foodborne illnesses by employing chemicals and processing techniques that stop the growth of dangerous germs.

Thus, According to the claim, one benefit of food processing is its capacity to lessen the growth of dangerous germs, which in turn prolongs the shelf life of food.

Learn more about Food, refer to the link:

https://brainly.com/question/32109606

#SPJ12

The circumference of a circle is 11π cm. Then the area is 30.25 π cm.

The term area is defined as the region bounded by the shape of an object. The area of a shape is the space covered by a figure or any two-dimensional geometric shape in a plane.

The area of a shape is the measurement of its surface. To calculate the area of a rectangle or square, multiply the length and width of the rectangle or square.

C = pi d

Therefore,

11π cm = diameter

Radius is 1/2 the diameter

Then radius = 5.5π cm

Area = πr²

Area = 30.25 π

Thus, The circumference of a circle is 11π cm. Then the are is 30.25 π cm.

To learn more about the area, follow the link;

https://brainly.com/question/27683633

#SPJ1

The correct IUPAC name of bicyclic compound is option no.4 (1alpha,4alpha)-5alpha-Fluorobicyclo[2.1.0]pentane.

The molecular formula of this compound is C₅H₇F and the molecular weight of this compound is 86.11. It has a 3D conformer.

IUPAC nomenclature is a method of naming organic chemical compounds which is recommended by the applied chemistry or the international union of pure. IUPAC names sometimes very simpler than the older names, as with ethanol instead of ethyl alcohol. For a relatively simple molecules they can be more easily understood than to the non-systematic names, which must be learnt as well as looked over. It should have maximum number of multiple bonds, maximum length as well as number of single bonds.

To know more about nomenclature here

https://brainly.com/question/15324006

#SPJ4

The number of objects in a mole of something is dictated by Avogadro's constant and the given statement is TRUE.

One mole of a substance is equal to 6.022 x 10^23 units of that substance (such as atoms, molecules, or ions), and this number is known as Avogadro's number or Avogadro's constant. The concept of the mole is a unit of measurement used in chemistry to express amounts of a chemical substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12. Avogadro's constant, 6.022 x 10^23, is used to relate the number of entities in a substance to the number of moles of that substance. This allows for the conversion between mass and number of particles, as well as for the calculation of the number of entities in a given mass of a substance.

Learn more about mole  here:

https://brainly.com/question/26416088

#SPJ4

Effusion is said to happen when gas molecules escape into a vacuum through a pinhole.

One gas mixes with another during diffusion, typically through thermal random motion that causes collisions and releases molecular energy. The capacity of gas to pass through a small aperture is known as effusion. In chemistry, the phrases effusion and diffusion are frequently used to refer to two distinct properties of gases.

However, for many who are just beginning to learn about gases, studying the terminologies can get rather perplexing. Although they may have a similar sound, the phrases diffusion and effusion are completely different. They cannot be used interchangeably since they have different meanings.

Want to know more about effusion visit the link which is given below;

https://brainly.com/question/28320456

#SPJ4

The gas will occupy 0.2624 L at 34.0 [tex]^oC[/tex] and 0.922 atm pressure.

For an ideal gas:

PV = nRT

Where P is the pressure of the gas, V is the volume of the gas, R is the ideal gas constant, and T is the temperature in kelvin.

In this case:

P = 0.922 atm

V is what we are looking for

n = 0.00961 mol

R = 0.082 L atm.mol−1⋅K−1

T = 34 + 273 = 307 kelvin

Making V the subject of the formula:

V = nRT/P

  = 0.00961 x 0.082 x 307/0.922

  = 0.2624 L

In other words, the volume that the oxygen will occupy would be 0.2624 L.

More on the ideal gas can be found here: https://brainly.com/question/28257995

#SPJ1

The number of molecules or the number of atoms that the oxygen has has is 9.6 * 10^22 molecules/ atoms.

We have to note that the number of the molecules of the oxygen that we have can be obtained by the use of the hypothesis that have been put forward by Avogadro.

We know that;

22.4 L of oxygen is contained in one mole of oxygen

3.5 L of oxygen would contain 3.5 * 1/22.4

= 0.16 moles of oxygen

If 1 mole of oxygen contains 6.02 * 10^23 molecules /atoms

0.16 moles of oxygen would contain 0.16 *  6.02 * 10^23/1

=9.6 * 10^22 molecules/ atoms

Learn more about volume of a gas:https://brainly.com/question/24189159

#SPJ1

Missing parts;

How many molecules of O2 are in a 3.5-liter container? How many atoms?

Covalent bonds are created between two nonmetals, whereas ionic bonds are formed between a metal and a nonmetal.

Covalent bonds between atoms develop when there is little to no difference in the electronegativity of the atoms, whereas ionic bonds form when there is a large difference.

Covalent bonds are created when the half-filled atomic orbitals of two different atoms overlap, but ionic bonds cannot be created by overlapping orbitals.

For example, the ionic bond in NaCl is written as Na⁺Cl⁻ because sodium is a metal and chlorine is a non-metal.

Let's use methane as an example. Due to the low difference in electronegativity between carbon and hydrogen, the atomic orbitals of these two elements meet in this molecule and form a covalent bond.

Want to know more about ionic and covalent bonds visit the link which is given below;

https://brainly.com/question/10777799

#SPJ4

No, isn't. NADH (nicotinamide adenine dinucleotide) is not the final electron acceptor in cellular respiration.

In the final stage of cellular respiration, the electron transport chain uses a series of electron carriers to transfer electrons from NADH and FADH2 to the final electron acceptor, which is oxygen (O2). The energy from these electrons is used to pump protons across a membrane, creating a proton gradient that drives the production of ATP through ATP synthase.

If you want to obtain the final electron acceptor in cellular respiration, you would need to provide an alternative electron acceptor in the electron transport chain. The most common final electron acceptors used in cellular respiration are oxygen (O2) in aerobes and non-oxygen compounds such as nitrate (NO3-), sulfur (S), or carbon dioxide (CO2) in anaerobes.

Learn more about NADH here:

https://brainly.com/question/14095785

#SPJ4

All species of life are metazoans. Eukaryotes with several cells and mitochondria are called metazoan animals.

All multicellular organisms with differentiated body parts, including tissues and organs, belong to the Metazoa group. They have specialized cells lining the cavity of their digestive system. They have nucleated cells with cell membranes.

The majority of metazoans have bilateral symmetry. They display the division of labor. The body organization of lower invertebrates is at the tissue or organ level, whereas the body organization of larger invertebrates and vertebrates is at the organ-system level. Unlike protozoans, which have a cell wall, animals don't.

To know more about metazoan visit:

https://brainly.com/question/15418347

#SPJ4

The enzyme's secondary, tertiary, and quaternary structures are probably disrupted when lactase is transferred to pH 5, which causes a significant drop in enzyme activity.

To learn more about lactase refer to:

https://brainly.com/question/2945627

#SPJ4

Cardiovascular diseases (CVDs) are the most common cause of death worldwide, claiming the lives of an estimated 17.9 million persons each year. CVDs are a group of heart and blood disorders.

The bone marrow produces stem cells, the building blocks that the body uses to make the different blood cells – red cells, white cells and platelets. The erythropoietin sends a message to the stem cells telling more of them to develop into red blood cells, rather than white cells or platelets.

Whole blood is made up of red blood cells, white blood cells and platelets, all of which are suspended in a liquid called plasma. Whole blood and each of it's four components are all valuable tools in modern medicine.

To know more about blood visit:

https://brainly.com/question/30089368

#SPJ4

The maximum amount of Fe that was produced during the experiment is 3 moles.

This can be determined by using the law of conservation of mass which states that the total mass of the reactants is equal to the total mass of the products. The starting amount of reactants is 3 moles of Fe2O3 and 5 moles of Al. The reaction produces Al2O3 and Fe. So, in order to balance the equation, the moles of Fe produced must be equal to the moles of Fe2O3 that were consumed.

Fe2O3 + 2Al -> Al2O3 + 2Fe

Since 3 moles of Fe2O3 were used, the maximum amount of Fe that can be produced is 3 moles.

Answer: 2.5 moles of Fe

Explanation:

Balanced Equation: Fe2O3 + 2AI ---> 2Fe + AI2O3

Mole Ratios:

   - for FE2O3: (1mol Fe / 1mol Fe2O3)

   - for AI: (1mol Fe / 2mol AI)

Stoichiometry Equation for Each Reactant: 

  - (3mol Fe2O3 / 1) x (1mol Fe / 1mol Fe2O3)

     - (3/1) x (1mol Fe/1)

     - 3mol Fe

  - (5mol AI / 1) x (1mol Fe / 2mol AI)

    - (5/1) x (1mol Fe/2)

    - 2.5mol Fe

The maximum amount of Fe that can be produced is 2.5 moles; as AI is the limiting reactant

Is large, the equilibrium mixture is mostly products. If Kc is small, the equilibrium mixture is mostly reactants. When Kc is approximately 1, the equilibrium mixture contains appreciable amounts of both reactants and products.

To learn more about momentum refer to:

https://brainly.com/question/18798405

#SPJ4

28 grams of N2 x (1 mol N2/14.0 grams of N2) x (2 mol NH3/1 mol N2) x (17.0 g NH3/ 1 mol NH3) = 68 grams NH3

25 g H2 x (1mol H2/2.0 g H2) x (2 mol NH3/3 mol H2) x (17 grams NH3/2 mol NH3) = 141.7 grams of NH3

So, 68 g NH3 can be produced because N2 is the limiting reactant, and you will run out of it first.

To find how much excess reagent is left, we need to do the reaction backward using the previous answer.

68 g NH3 x (1mol NH3/17.0 g NH3) x (3 mol H2/2 mol NH3) x (2.o g H2/1 mol H2) = 12 g H2

25-12=13 g H2 "

To know more about NH3:

https://brainly.com/question/16119085

#SPJ4

A carbocation is all of the following, except a nucleophile.A carbocation is a positively charged species, a reactive intermediate, and an electrophile, but it is not a nucleophile.

Nucleophiles are species that donate electrons to form a new covalent bond, while electrophiles are species that accept electrons to form a new covalent bond. Carbocation have a positive charge and therefore it is an electrophile.A carbocation is a type of organic cation in which a carbon atom has a positive charge. Carbocations are formed by the removal of a leaving group from an organic molecule, such as an alkane, alkyl halide, or alkyne, creating a positively charged carbon atom. Carbocations are typically intermediate species in organic reactions and are highly reactive, as the positive charge on the carbon atom creates a high degree of electron deficiency.

Learn more about Carbocation here:

https://brainly.com/question/13164680

#SPJ4

The number of moles in the 5.73 Kg sample of lactic acid, C₃H₆O₃, is 63.61 moles

The relationship between number of mole and molar mass is given below:

Number of mole = mass / molar mass

With the above formula, we can obtain the number of mole in the 5.73 Kg sample of lactic acid, C₃H₆O₃. Details below:

Mole = mass / molar mass

Number of mole of C₃H₆O₃ = 5730 / 90.078

Number of mole of C₃H₆O₃ = 63.61 moles

Thus, the number of mole of the lactic acid, C₃H₆O₃ is 63.61 moles

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1

The pressure of a mixture of nitrogen, carbon dioxide, and oxygen gases (PO₂ = 254 mm Hg, PN₂ = 0.351 atm, and PCO₂ = 43.9 kPa) is 113.3 kPa

The total pressure exerted by a gas mixture is the sum of the partial pressures of the component gases. For example, Earth's atmosphere is a mixture of gases consisting of nitrogen, oxygen, argon, carbon dioxide, and other gases. Partial pressure is the pressure that each gas has in a mixture so that the pressure of each gas is not affected by the presence of other gases.

The partial pressure formula is:  

Ptotal = PNitrogen + Poxygen + PCarbon dioxide.

In question:

PO₂ 254 mm Hg = 33.9 kPa

PN₂ 0.351 atm = 35.5 kPa

PCO₂ = 43.9 kPa

So,

Ptotal = PO₂ + PN₂ + PCO₂

Ptotal = 33.9 kPa + 35.5 kPa + 43.9 kPa

Ptotal = 113.3 kPa

The pressure of a mixture of nitrogen, carbon dioxide and oxygen gases are 113.3 kPa.

Complete the question:

What is the pressure of a mixture of nitrogen carbon dioxide and oxygen gases if the pressures of these gases are as follows: PO2 = 254 mm Hg, PN2 = 0.351 ATM, and PCO2 = 43.9 kPa?

Learn more about the pressure of a mixture at https://brainly.com/question/19813237.

#SPJ4

Answer:

So 3.01 times 10 to the 22 atoms is  050 moles magnesium

Explanation:

hope this helps

It will now be 8.3L in volume.

Volume is the quantity of space a thing occupies, whereas capacity is a measure of the substance it can store, such as a solid, a liquid, or a gas. While capacity can be measured in virtually any other unit, such as liters, gallons, pounds, etc., volume is measured in cubic units.

Volume is the three-dimensional space inhabited by matter or encompassed by a surface, and it is measured in cubic units. The cubic meter (m3), a derived unit, is the SI unit of volume.

To know more about volume visit:

https://brainly.com/question/5633490

#SPJ1

Answer: the answer is 9.02

Explanation:

I figured the answer out because 273 x 2 equals 546 so I thought you had to multiply 4.51 x 2 and the answer is 9.02

The line angle structure formula for cyclopropane is C3H6 or (CH2)3 with three methylene groups attached at the corner of a triangle.

The cycloalkane, cyclopropane has the chemical formula (CH2)3, and it is made up of three methylene groups (CH2) that are joined together to create a ring. The structure experiences significant ring strain as a result of the ring's modest size. The structure of cycloprane is depicted in the image attached.

A line-angle formula, also known as a skeletal structure, is even more condensed. In this formula, carbon atoms are implied at the corners and ends of lines, and each carbon atom is assumed to be connected to enough hydrogen atoms to give it four bonds. This is because carbon atom has a valency of four or it is a tetravalent atom.

To know more about organic structures, refer to the following link:

https://brainly.com/question/419650

#SPJ4

Pair of each atom that has a greater electronegativity a) Ga, b) O, c) Cl, d) Br, e) Sr.

On the periodic table, electronegativity generally increases as you move from left to right across a period and decreases as you move down a group. As a result, the most electronegative elements are found on the top right of the periodic table, while the least electronegative elements are found on the bottom left.

The electrons with negative charges are drawn to the positive charge protons in the nucleus.The electronegativity / attraction will rise with the amount of protons present in the nucleus.

To know more about electronegativity visit:

brainly.com/question/17762711

#SPJ1