A crate is sliding on the floor. If there is a total force acting on the crate in the same direction as it is sliding, the crate would
A) slow down
B) speed up
C) remains the same speed
​​​​​​​ D) slow down, change direction and then speed up going the other way,
E) remains the same speed but changes direction

Answers

Answer 1

But we do not know whether the force is pushing or pulling (the same direction (both forces are parallel) but: .........[ ]<-F-- or .......[ ]--F-->). I suppose the correct answer is B


Related Questions

Rank in order, from largest to smallest, the magnitudes of the momentum p1x through p5x of the objects presented in (Figure 1). Rank the magnitudes of the momentum from largest to smallest. To rank items as equivalent, overlap them.

Answers

The decreasing order of the momenta are b>a=d=e>c.

What is Momentum?Momentum is the result of a particle's mass and velocity. Being a vector quantity, momentum possesses both magnitude and direction.According to Isaac Newton's second equation of motion, the force acting on the particle equals the time rate of change of momentum.According to Newton's second law, if a particle is subjected to a constant force for a specific amount of time, the result of the force and time (referred to as the impulse) is equal to the change in momentum. On the other hand, a particle's momentum represents the length of time needed for a consistent force to bring it to rest.

Solution: The momentum of all the options are mentioned below according to the formula:

a. p = 20 × 1 = 20gm/s

b. p = 20 × 2 = 40gm/s

c. p =10 × 1 = 10gm/s

d. p = 10 × 2 = 20 gm/s

e. p =200 × 0.1 = 20gm/s

Know more about momentum https://brainly.com/question/904448

#SPJ4

Question:

I hope you are trying to ask the question below:

Rank in order, from largest to smallest, the momenta a to e of the objects

a. 20 g & 1 m/s

b. 20 g & 2 m/s

c. 10 g & 1 m/s

d. 10 g & 2 m/s

e. 200 g & 0.1 m/s

A person stands on the ground with a slingshot and tries to hit a high limb on a nearby tree. The limb is 18.3 feet above the ground. What is the minimum initial velocity in meters/second of a rock leaving the slingshot at 6 feet above the ground that would be able to reach the limb

Answers

The minimum initial velocity of the rock is V = 8.56 m/sec.

What is Conservation of Energy?

According to the rule of conservation of energy, energy can only be transformed from one form of energy to another and cannot be created or destroyed. This indicates that unless energy is added from the outside, a system always has the same quantity of energy.

Calculate the rock's minimal initial velocity in meters/second as it exits the slingshot at a distance of 6 feet [tex]$\left(h_{2}=6\right.ft.)[/tex] above the ground.

Using the provided information, the net height of the limb is calculated as shown below.

[tex]$$h &=h_{1}-h_{2}$$[/tex]

h = 18.3 - 6

h = 12.3

Now, using the conservation of energy the minimum initial velocity of the rock is computed as shown below,

Kinetic energy of the rock = Potential energy the rock

[tex]$$\begin{aligned}\frac{1}{2} m V^{2} &=m g h \\\frac{1}{2} V^{2} &=g h \\\frac{1}{2} V^{2} &=\left(32.1 \mathrm{ft} / \mathrm{s}^{2}\right)(12.3 \text { feet }) \\V &=\sqrt{2\left(32.1 \mathrm{ft} / \mathrm{s}^{2}\right)(12.3 \mathrm{feet})}\end{aligned}$$[/tex]

V = 28.10 [tex]\frac{ft}{s}[/tex].

The minimal initial velocity in meter/second is 8.56.

Therefore, the minimum initial velocity of the rock is 8.56 m/sec

To know more about conservation of energy visit:
https://brainly.com/question/18924822

#SPJ4

The ___________ is a plane perpendicular to the optic axis through the focal point.

Answers

The focal plane  is a plane perpendicular to the optic axis through the focal point.

What is  focal plane?

The focal plane is the distance between your camera lens and the perfect point of focus in an image. This area is located a certain distance in front of your camera lens, and spans horizontally, left to right across your frame.

What is focal plane and lens?

The focal plane is the one in which each focus is most likely to be located. The focal plane houses the lens' focus. The primary axis of the lens and the focus plane are perpendicular. The focal length of the lens determines how far the focal plane is from the lens.

Learn more about focal plane

brainly.com/question/3081731

#SPJ4

Four identical lab carts each have a mass of 200 kg. different masses are added to the carts and the velocities are measured. all carts move to the right. an illustration with four carts labeled cart a, cart b, cart c, and cart d. cart b has a 20 kilogram mass in it, cart c has a 40 kilogram mass in it, and cart d has a 60 kilogram mass in it. there are labels under each cart. under cart a is v = 4.8 meters per second, under cart b is v = 4.0meters per second, under cart c is v = 3.8 meters per second, and under cart d is v = 3.5 meters per second. which cart has the greatest momentum? cart a cart b cart c cart d

Answers

Cart A has the greatest momentum.

What is momentum?

The definition of momentum is "mass in motion." Since every item has mass, if it is moving, it must have momentum because its mass is in motion. Mass and velocity are two factors that affect momentum. According to an equation, an object's momentum is determined by multiplying its mass by its velocity.

                                                        p = mv

p = momentum

m = mass

v = velocity

Calculation:

Cart A

m₁ = 200 kg

v₁ = 4.8 m/s

p₁ = 200 × 4.8

p₁ = 960 kg-m/s

Cart B

m₂ = 200 + 20 = 220 kg

v₂ = 4 m/s

p₂ = 220 × 4

p₂ = 880 kg-m/s

Cart C

m₃ = 200 + 40 = 240 kg

v₃ = 3.8 m/s

p₃ = 240 × 3.8

p₃ = 912 m/s

Cart D

m₄ = 200 + 60 = 260 kg

v₄ = 3.5 m/s

p₄ = 260 × 3.5

p₄ = 910 kg-m/s

Hence concluded, cart A has the greatest momentum.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ4

Two worlds in the outer solar system that seem remarkably similar to each other are:

Answers

Two worlds in the outer solar system that seem remarkably similar to each other are: Triton and Pluto

The outer solar system comprises the next four planets and everything beyond the planet Neptune but within the gravitational pull of the Sun. The Kuiper Belt and the Oort Cloud are also parts of the outer region.

Triton is only slightly larger than Pluto. Both worlds have similar surface materials, such as nitrogen, methane and carbon monoxide. Their diameters, masses and densities are also similar. Both Triton and Pluto may also have originated within the Kuiper Belt. Triton is thought to be originally a Kuiper Belt Object that was captured by Neptune's gravity.

Because Triton and Charon-Pluto are both from the Kuiper belt they are both made of similar materials such as nitrogen, methane, carbon dioxide and water ice. Both  have large cores that are made primarily of rock with mantles of water ice and crusts made of frozen nitrogen. Neither of them have a magnetic field.

To learn more about  Kuiper Belt   here

https://brainly.com/question/25583240?referrer=searchResults

#SPJ4

If we wanted to improve the efficiency of technology to reduce electrical power consumption. The sectors we would choose are?

Answers

If the efficiency of technology was to be improved in other to reduce electrical power consumption, the sectors which would be chosen is referred to as residential and commercial.

What is Technology?

This is defined as the application of science to the practical aims and activities of human life. Power on the hand is defined as the amount of energy which is transferred per unit time and the S.I unit is referred to as Watts.

It can be inferred that electric power consumption is most abundant in residential and commercial sectors due to the number of appliances and hours which are present and used in this area.

It is therefore appropriate to focus on these two sectors so as to achieve the aim of an efficient technology in reduction of electrical power consumption.

Read more about Electric power here https://brainly.com/question/1125269

#SPJ1

Which element of a valid contract is established by getting the signatures of all parties?

Answers

The element of a valid contract which is established by getting the signatures of all parties is mutual agreement

What is an element of a valid contract?

An element of a valid contract simply refers to that promise made between two or more parties that which allow the courts to make judgement.

Some elements of valid contract are:

OfferAcceptanceConsiderationIntention to create legal relationCertainty and capacity.

So therefore, the element of a valid contract which is established by getting the signatures of all parties is mutual agreement

Learn more about elements of a valid contract:

https://brainly.com/question/15101023

#SPJ1

A total electric charge of 4.00 nC is distributed uniformly over the surface of a metal sphere with a radius of 26.0 cm. The potential is zero at a point at infinity.

Answers

for what we can get from our side then we will see if they are being made in a letter or something which is leading enormous growth in cities with brick and its own way that it will not on the market and its not a good life for us to stay in and

in the photoelectric effect a photon with an energy of 5.3 * 10^-19 J strikes an electron in a metal

Answers

The velocity of the photo electron is 6.11 × 105 ms

Given :

Supplied energy, Es = 5.3 x 10-19 J

Minimum energy of the electron to escape from the metal, E. = 3.6 x 10-19 J

To Find :

Velocity of photoelectron

Solution : The energy supplied by the photon is equal to the sum of minimum escape energy and the kinetic energy of the escaping electron. So

5.3 × 10^-19 J = 3.6 × 10^-19 J + K

K = 5.3 x 10^-19 - 3.6 x 10^-19

K = 1.7 × 10^-19 J

The formula of kinetic energy is given by:

K = 1/2 mv^2

v = √2K/m

= √2 x 1.7 x 10^-19

√ 9.1 x 10^-31

v = 6.11 x 10^5 m/s

So, the velocity of the photo electron is 6.11 x 10^5 m/s

Learn more about Velocity here:

https://brainly.com/question/15585270

#SPJ4

John is talking to his friend about painting a fence. He states that if he uses a roller brush he will cover the fence faster than if he uses a bristle brush. This is an example of a a. Law b. Belief c. Theory d. Hypothesis​

Answers

Answer:

b

Explanation:

Which starting material is the limiting reagent in this procedure? which reagent is used in excess? how great is the molar excess (how many times greater)?

Answers

The limiting reagent in this procedure is the substance that is completely used in the reaction. The substance which is not completely used is called excess.

The beginning cloth in a chemical reaction is known as the reactant. each chemical response could have one or more reactants.

In a chemical response limiting reagent is the reactant this is fed on first and prevents any similar reaction from happening. the quantity of product shaped during the response is decided by means of the limiting reagent. as an example, allow us to recall the response of solution and chlorine

Materials used during the manufacture of the lively substance (e.g., tradition media, growth factors, and so on) and that are not meant to form a part of the active substance shall be taken into consideration as raw substances. cloth forming a critical part of the lively materials element shall be considered as the beginning substance.

Learn more about limiting reagents here:-https://brainly.com/question/26905271

#SPJ4

A certain frictionless simple pendulum having a length l and mass m swings with period t. If both l and m are doubled, what is the new period?.

Answers

If l and m both are doubled then the period becomes √2*T

what is a simple pendulum?

It is the one which can be considered to be a point mass suspended from a string or rod of negligible mass.

A pendulum is a weight suspended from a pivot so that it can swing freely.

Here,

A certain frictionless simple pendulum having a length l and mass m

mass of pendulum = m

length of the pendulum = l

The period of simple pendulum is:

[tex]T = 2\pi \sqrt{\frac{l}{g} }[/tex]

Where k is the constant.

Now the length and mass are doubled,

m' = 2m

l' = 2l

[tex]T' = 2\pi \sqrt{\frac{2l}{g} }[/tex]

[tex]T' = \sqrt{2}* 2\pi \sqrt{\frac{l}{g} }[/tex]

[tex]T' = \sqrt{2} * T[/tex]

Hence,

If l and m both are doubled then the period becomes √2*T

Learn more about Simple Harmonic Motion here:

https://brainly.com/question/17315536

#SPJ4

Although centuries ago, astronomers thought that a nova was a new star, appearing for the first time in the heavens, today we know that it is:

Answers

Astronomers thought that a nova was a new star, appearing for the first time in the heavens, today we know that it is as a binary star system.

What is the binary star system about?

A binary star system is known to be one where one star is known to be called a white dwarf and there is a mass that is said to be transferred to it

A binary star is known to be a kind of a system that is composed of two stars that are known to be gravitationally held together to and in orbit near each other.

Note that Binary stars in the night sky are ones that are often seen as a single object and thus Astronomers thought that a nova was a new star, appearing for the first time in the heavens, today we know that it is as a binary star system.

Learn more about astronomers  from

https://brainly.com/question/1141458

#SPJ1

Based on illustrations of magnetic field lines, where could an object be placed so it would not experience a magnetic force

Answers

Halfway between the like poles of two magnets, because the field lines bend away and do not enter this area.

How does a magnetic field diagram show where the field is strongest?

The magnetic field lines do not ever cross. The lines include arrowheads to indicate the direction of the force exerted by a magnetic north pole. The closer the lines are to the poles, the stronger the magnetic field (thus the magnetic field from a bar magnet is highest closest to the poles).

Where is magnetic field the strongest and weakest on a magnet?

The bar magnet's magnetic field is strongest at its core and weakest between its two poles. The magnetic field lines are densest immediately outside the bar magnet and least dense in the core.

Which two locations on the magnet would have the greatest attractive forces?

Inside the magnet itself, the field lines run from the south pole to the north pole. The magnetic field is strongest in areas of greatest density of magnetic field lines, or areas of the greatest magnetic flux density.

Learn more about magnetic field

brainly.com/question/11514007

#SPJ4

How much the aproximate number of atoms in bacteria.assume that average mass of an atom in bacteria is ten times the mass of hydrogen atom

Answers

The approximate number of atoms is 15 because I said and if it’s not that’s cool but that’s what I think it is 15 and the hydrogen is 11

Two 5000-kg passenger cars roll without friction (one at 1 m/s, the other at 2 m/s) toward one another on a level track. They collide, couple, and roll away together with a combined momentum of

Answers

The combined momentum of the passengers is 5000 kgm/s.

Combined momentum of the passenger

The combined momentum of the passengers is calculated as follows;

P = mv1 + mv2

where;

m is mass of the passengersv1 is velocity of the first passengerv2 is velocity of the second passenger

P = m(v1 + v2)

P = 5000(-1 + 2)

P = 5000 kgm/s

Thus, the combined momentum of the passengers is 5000 kgm/s.

Learn more about momentum here: https://brainly.com/question/7538238

#SPJ1

In an MRI, the magnetic field B is generated by a solenoid of length 100 cm and diameter of 90 cm. The B field generated is one (1) T. The largest current the wire can carry is 76 A. _____ turns of solenoid is needed.

Answers

Given,

L=100 cm=0.1 m

D=90 cm

B=1 T

I=76 A

B*L=μnI

1 *0.1= 4π*[tex]10^{-7}[/tex]*n*76

n= 1047

So the turns of solenoid needed is 1047.

Solenoid

A solenoid with infinite length but finite diameter is said to be infinite. In this abstraction, the solenoid is frequently seen as a cylindrical sheet of conductive material. The term "continuous" refers to the fact that the solenoid is not made up of discrete coils with finite widths but rather numerous infinitely thin coils joined together without any gaps. An indefinitely long solenoid has a homogenous magnetic field inside of it that is independent of the cross-sectional area or the distance from the axis. This is a long enough derivation of the magnetic flux density surrounding a solenoid that fringe effects may be disregarded.

In an MRI, the magnetic field B is generated by a solenoid of length 100 cm and diameter of 90 cm. The B field generated is one (1) T. The largest current the wire can carry is 76 A. 1047 turns of solenoid is needed.

Learn more about solenoid here:

https://brainly.com/question/15504705

#SPJ4

A proud deep-sea fisherman hangs a 69.5-kg fish from an ideal spring having negligible mass. The fish stretches the spring 0.130 m. (a) Find the force constant of the spring.

Answers

Force constant = k = 6811 N/m

Given:

mass = m = 69.5 kg

L(initial) = ideal spring length = 12 cm= 0.120 m

L(final) = final spring length = 13 cm= 0.130 m

Two forces acting on the object is k*x and mg

so,

kx-mg=0

kx = mg

k = mg/x

We know that x= displacement = L(final)- L(initial)

0.130-0.120=0.10

k= 69.5×9.8/0.10

k =6811 N/m

To learn more about force constant of spring visit:

https://brainly.com/question/20785296

#SPJ4

The kinetic energy of a 23.2-g object moving at a speed of 81.9 km/hr is ________ j.

Answers

Taking into account the definition of kinetic energy, the kinetic energy of a 23.2 g object moving at a speed of 81.9 km/hr is 6.004 J.

Kinetic energy

Kinetic energy is a form of energy. It is defined as the energy associated with bodies that are in motion and this energy depends on the mass and speed of the body.

This is, kinetic energy is defined as the amount of work necessary to accelerate a body of a certain mass and in a position of rest, until it reaches a certain speed. Once this point is reached, the amount of accumulated kinetic energy will remain the same unless there is a change in speed or the body returns to its state of rest by applying a force.

Kinetic energy is represented by the following formula:

Ec = ½ mv²

Where:

Ec is kinetic energy, which is measured in Joules (J).m is mass measured in kilograms (kg). v is velocity measured in meters over seconds (m/s).Kinetic energy in this case

In this case, you know:

Ec= ?m=  23.2 g= 0.0232 kg (being 1 g= 0.001 kg)v= 81.9 km/h= 22.75 m/s (being 1 km/h= 0.277778 m/s)

Replacing in the definition of kinetic energy:

Ec = ½ 0.0232 g×(22.75 m/s)²

Solving:

Ec= 6.004 J

Finally, the kinetic energy of a 23.2 g object moving at a speed of 81.9 km/hr is 6.004 J.

Leant more about kinetic energy:

https://brainly.com/question/25959744

deidre walked her dog a distance of 95 meters to the north. the walk took 45 seconds. what was their velocity

Answers

Velocity of Deidre and her dog is 2.11m/s.

What is velocity?Velocity is the rate of change of position of an object in a particular frame of reference Mathematically, velocity of an object = Displacement of the object/time taken

What is velocity of Deidre and her dog ?The distance covered by Deidre and her dog is 95 meter towards north.The time taken to cover the distance is 45 second.So velocity of Deidre and her dog =95/45

=2.11m/s

Thus , we can conclude that the velocity of Deidre and her dog is 2.11 m/s towards north .

Learn more about velocity here :

brainly.com/question/80295?source=archive

#SPJ1

question is down below

Answers

The vertical components of velocity is 10.35 m/s and the horizontal component of velocity is 38.6 m/s

What are the components of velocity?

We know that velocity is a vector quantity, a vector often can be resolved into its components. The vertical components is V sinθ while the horizontal component is vcosθ.

Hence;

Vertical component = 40 m/s sin 15 degrees = 10.35 m/s

Horizontal component = 40 cos 15 degrees = 38.6 m/s

Learn more about components of velocity:https://brainly.com/question/14478315

#SPJ1

convert 14 mg to kg ....

Answers

♨ANSWER♥

14mg = 14 × 10^-3 g

= 14 × 10^-3 / 10^3 kg

= 14 × 10^-6 kg

= 0.014 kg

...hope this helps...

_♡_mashi_♡_

Answer:

0.000014 kg

Explanation:

________ occurs when a person is holding an object that is directly hit or splashed by lightning.

Answers

Contact injury happens when a person is holding an object that is directly hit or splashed by lightning.

To find answer, we need to know more about the lightning and injuries.

What are the injuries caused by lightning?The phenomenon of natural electrical discharge happens in a short time with a bright flash is called lightning.It carries a huge amount of energy.The injuries caused by lightning can be classified as Direct strikes, Side splash and the Contact injury.Direct injuries happens when a person directly hit by lightning.Side splash occurs when a current splashes from a nearby object.Contact injury happens when a person touching an object that is hit by lightning.

Thus, we can conclude that, contact injury occurs when a person is holding an object that is directly hit or splashed by lightning.

Learn more about lightning and injuries here:

https://brainly.com/question/28055828

#SPJ1

When someone is holding something that has been struck or splashed by lightning, contact damage occurs.

We need additional information concerning lightning and injuries in order to identify the solution.

What types of injuries are brought on by lightning?Lightning is the name for a natural electrical discharge that occurs quickly and with a dazzling flash.It has a tremendous amount of energy.Lightning-related injuries can be divided into three categories: direct strikes, side splashes, and contact injuries.When someone is struck by lightning directly, they can get direct injury.When a current splashes from a neighboring object, it is called a side splash.When someone touches a lightning-hit object, contact harm results.

In light of this, we can say that contact injuries happen when a person is holding an object that has been struck by lightning or splashed by it.

Learn more about the lightning and harm here:

https://brainly.com/question/28055828

#SPJ1

A 10 kg box initially at rest is pulled with a 50 N horizontal force for 4 m across a level surface. The force of friction acting on the box is a constant 20 N. How much work is done by the 50 N force?

Answers

The work is done by the 50 N force is 200 J.

Work done by the 50 N force

Work done = Fd

where;

F is Force applied d is the displacement of the object

Work done = 50 N x 4 m = 200 J

Thus, the work is done by the 50 N force is 200 J.

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

Which type of fire suppression system is designed to work in areas where electrical equipment is used and contains pressurized air?

Answers

In a dry pipe sprinkler system, pressurized air or nitrogen, rather than water, is used to fill the pipes. This air maintains the closed position of a remote valve, also referred to as a dry pipe valve.

The dry-pipe valve, which is situated in a hot area, keeps water from flowing into the pipe until a fire triggers the operation of one or more sprayer. When this occurs, the dry pipe valve releases and the air leaves. After that, water enters the pipe and pours onto the flames through open sprinklers.

Learn more about the Fire suppression system: https://brainly.com/question/14727381

#SPJ1

A see-saw is balanced on its
midpoint. A 22.4 kg kid sits on the left, 1.75 m from the axis. A second kid sits on the other side, 1.22 m from the axis. What is the mass of the second kid?

Answers

Answer:

W1 L1 = W2 L2        equation for balancing torques

M1 g L1 = M2 L2 g

Or M2 = M1 * 1.75 / 1.22 = 1.43 M1 = 32.1 kg

Which type of galaxy is likely to contain only o-spectral type stars?

Answers

The answer is Spiral

A crate with a mass of 44.0 kg is pushed with a horizontal force of 150 N. The crate moves at a constant speed across a level, rough floor a distance of 5.50 m.

Answers

Work done will be 825 N*m

Given:

mass of crate = 44.0 kg

horizontal force = 150 N

distance moved by crate = 5.50 m

To Find:

Work done

Solution: Work is done whenever a force moves something over a distance. You can calculate the energy transferred, or work done, by multiplying the force by the distance moved in the direction of the force.

First we want to find the work, it is given by the force applied times the distance moved, so the work is just:

W = Force x displacement

W = 150N*5.50m

W = 825 N*m

So, work done will be 825 N*m

Learn more about Work done here:

https://brainly.com/question/18762601

#SPJ4

A convex lens of focal length 25 cm is in contact with a concave lens of focal length 50 cm. The equivalent focal length of this combination-lenses should be Group of answer choices

Answers

The equivalent focal length of this combination-lenses should be +50 cm.

Given:

Focal length of convex lens, f₁ = +25 cm

Focal length of concave lens, f₂ = -50 cm

Calculation:

We know that the power of a lens is given as:

P = 1 / f

where, f is the focal length of lens

Now, the power of convex lens can be calculated as:

P₁ = 1/f₁

  = 1/(25×10⁻² m)

  = 100/25

  = +4 D

Similarly, the power of concave lens can be calculated as:

P₂ = 1/f₂

    = (1/-50×10⁻² m)

    = -100/50

    = -2 D

Thus, the power of the combined lenses can be calculated as:

P₍₁₊₂₎ = P₁ + P₂

       = +4 D - 2 D

       = +2 D

Now, the combined focal length of the lens can be calculated as:

f₍₁₊₂₎ = 1 / P₍₁₊₂₎

      = 100 / 2 D

      = +50 cm

Therefore, the equivalent focal length of this combination-lenses will be +50 cm.

Learn more about mirrors and lenses here:

https://brainly.com/question/3209252

#SPJ4

A fireworks shell is accelerated from rest to a velocity of 60.0 m/s over a distance of 0.200 m. How long did the acceleration last

Answers

The acceleration lasted for 0.007s.

To find the answer, we need to know about the Newton's equation of motion.

What's the Newton's equation of motion that relates initial velocity, final velocity, acceleration, time and distance?

Newton's equations are

V²-U²= 2aSV²-U²= 2aSV= U+at

V= final velocity, U= initial velocity, a= acceleration, t= time and S = distance

What's the acceleration, if the fireshell is accelerated from rest to a velocity of 60.0 m/s over a distance of 0.200 m?Here, U= 0m/s, V= 60.0 m/s, S= 0.200 m

60²-0= 2a×0.2= 0.4a

a= 3600/0.4= 9000m/s²What's the time taken by the fireshell to achieve 60m/s with 9000m/s² acceleration from rest?Here, U= 0m/s, V = 60.0 m/s, a= 9000m/s²60= 0+9000tt= 60/9000= 0.007 s

Thus, we can conclude that the acceleration of the fireshell lasted for 0.007s.

Learn more about the acceleration here:

brainly.com/question/460763

#SPJ4

Other Questions
Two very small +3.00-C charges are at the ends of a meter stick. Find the electric potential (relative to infinity) at the center of the meter stick. Which is closest to the quotient 4,367 divided bye 0.004?A. 1,000B. 10,000C. 100,000D. 1,000,000 A man with a height of 5ft casts a shadow of 2ft. What will be the height of a tree that casts a shadow of 40ft at the same time? please solve the question below Write and equality for an each situation . Gary has at least 25 blue t shirts The room can hold no more than 50 people . y=-3x-5 y=4x+30PLS HELP ASAP 3 Which is the primary advantage of sexual reproduction over asexualreproduction?innrina are identical to parents. plsss anyone help I BEG. its not that hard im just lazy and don't feel like thinking3 What are FDA requirements for off-site catering without temperature controls Quality improvement, relevant costs, relevant revenues. SpeedPrint manufactures and sells 18,000 high-technology printing presses each year. The variable and fixed costs of rework and repair are as follows: Variable Cost Fixed Cost Total CostRework Cost per hr. $79 $115 $194Repair CostCustomer Support cost/hr. 35 55 90Transportation Cost/load 350 115 465Warranty repair cost/hour 89 150 239Speed Prints current presses have a quality problem that causes variations in the shade of some colors. Its engineers suggest changing a key component in each press. The new component will cost $70 more than the old one. In the next year, however, Speed Print expects that with the new component it will (1) save 14,000 hours of rework, (2) save 850 hours of customer support, (3) move 225 fewer loads, (4) save 8,000 hours of warranty repairs, and (5) sell an additional 140 printing presses, for a total contribution margin of $1,680,000. SpeedPrint believes that even as it improves quality, it will not be able to save any of the fixed costs of rework or repair. SpeedPrint uses a 1-year time horizon for this decision because it plans to introduce a new press at the end of the year.1. Should SpeedPrint change to the new component? Show your calculations.2. Suppose the estimate of 140 additional printing presses sold is uncertain. What is the minimum number of additional printing presses that SpeedPrint needs to sell to justify adopting the new component?3. What other factors should managers at SpeedPrint consider when making their decision about changing to a new component? Anti-federalist views 15 Which of the following mutations would have the potential to affect futuregenerations of a species?A A frame shift mutation in the X chromosome of a cheek cellB A chromosomal mutation in the Y chromosome of a kidney cellCA point mutation in the first chromosome of a sperm cellD A substitution mutation in the third chromosome of a uterus cell Submit your 150-word letter of application that follows the proper format and references the hiring manager and job title as well as your name and qualifications. ( if someone can answer this imma cri) Tito builds a model of the solar system. In his model, the diameter of the sphere representing Jupiter is 7 inches. What is the circumference of a cross section through the center of the model of Jupiter? Use 3.14 for a. On April 1, the company hired an attorney for a flat monthly fee of $2,000. Payment for April legal services was made by the company on May 12. b. As of April 30, $2,559 of interest expense has accrued on a note payable. The full interest payment of $7,677 on the note is due on May 20. c. Total weekly salaries expense for all employees is $8,000. This amount is paid at the end of the day on Friday of each five-day work week. April 30 falls on a Tuesday, which means that the employees had worked two days since the last payday. The next payday is May 3.Required:The above three separate situations require adjusting journal entries to prepare financial statements as of April 30. For each situation, present both the April 30 adjusting entry and the subsequent entry during May to record payment of the accrued expenses. what type force does this depict? Matthew has a loyalty card good for a discount at local hardware store. The item he wants to buy is priced at $13 before discount and tax. After the discount and before tax a price is $12.48. Find the percent discount. ANSWER PLEASE Show your work below we have discussed in class to support the answer of $60.19: What does y = 1/3x + 5 look like on a graph? Examples of a vassal and fief??