Answer:
New temperature T2 = -124.7 °C
Explanation:
Given:
Old volume V1 = 135 cm³
New volume V2 = 140 cm³3
Old temperature T1 = 143 K
Find:
New temperature T2
Computation:
V1 / T1 = V2 / T2
135 / 143 = 140 / T2
New temperature T2 = 148.3 K
New temperature T2 = 148.3 - 273
New temperature T2 = -124.7 °C
g As the number of nonvolatile solute particles in a given volume of solution increases, A) the boiling point increases and the vapor pressure at 25°C increases. B) the freezing point decreases and the vapor pressure at 25°C decreases. C) the freezing point increases and the vapor pressure at 25°C increases. D) the boiling point decreases and the vapor pressure at 25°C decreases. E) the freezing point increases and the vapor pressure at 25°C decreases.
Answer:
B) the freezing point decreases and the vapor pressure at 25°C decreases.
Explanation:
Colligative properties are those properties that depend on the amount of solute in solution. Both freezing point and vapour pressure are colligative properties.
As the number of nonvolatile solute particles increases, the freezing point of the solution decreases. This is known as freezing point depression.
Similarly, "Vapor pressure is a colligative property, so the vapor pressure of solutions is directly proportional to the amount of solute present in a solution. When a solute is present in a solvent, the vapor pressure is lowered because fewer solvent molecules are present at the top of the solution" (Lumen Learning).
Answer:
f u moderators
Explanation:
euurhtiuubbfjdhbgvzrbsf im sorry
Which phrase describes air density? increases as altitude increases Ο Ο Ο equals mass divided by volume pushes molecules in one direction exerts less pressure as it increases
♡︎PLS HELP IM TIMED PLS WILL GIVE BRAINLIEST!!!♡︎
Answer:
The correct answer is B. equals mass divided by volume
Answer:
They were right, I got all the questions right. If you need answers I got them I guess?
Explanation:
Consider the ranges of pitches made by these instruments and vocals.
A graph with frequency in Hertz on the x axis from 27 Hertz to 4166 Hertz. On the y axis are piccolo, oboe, flute, soprano vocal, violin, alto vocal, trumpet, clarinet, tenor vocal, bass vocal, guitar, french horn, bassoon, tuba, standup bass, bass guitar and pipe organ. Piccolo is 620 to 4166 Hertz, Oboe is 275 to 2200 Hertz, flute is 275 to 2200 Hertz, Soprano vocal is 200 to 1850 Hertz, violin is 196 to 3135 Hertz, alto vocal is 180 to 1760 Hertz, trumpet is 164 to 1050 Hertz, clarinet is 164 to 1900 Hertz, tenor vocal is 130 to 1306 Hertz, bass vocal is 96 to 987 Hertz, guitar is 83 to 850 Hertz, french horn is 83 to 1050 Hertz, bassoon is 61 to 529 Hertz, tuba is 49 to 246 Hertz, standup bass is 41 to 275 Hertz, bass guitar is 41 to 400 Hertz and pipe organ is 27 to 4166 Hertz.
In terms of the highest pitches they can make, which list correctly orders the instruments and vocals from highest to lowest?
clarinet, bassoon, piccolo, soprano vocal
piccolo, oboe, standup bass, tenor vocal
tuba, bass guitar, violin, piccolo
violin, clarinet, French horn, tuba
Answer:
D is correct
Explanation:
EDG 2021
Compare and contrast the use of fossil fuels and wind energy. (1 point) Both fossil fuels and wind energy can be used to produce electricity. However, burning fossil fuels does not pollute the atmosphere, while using Earth's wind does. O Both fossil fuels and wind energy contribute negatively to climate change. However, mining for fossil fuels is much more damaging to the environment than using wind power. Both fossil fuels and wind energy can be used to produce electricity. However, wind energy does not pollute the atmosphere, while burning fossil fuels does. Both fossil fuels and wind energy contribute negatively to climate change. However, using Earth's wind for energy is much more damaging to the environment than using fossil fuels.
Answer:
The Answer will be provided below, please pay attention in class next time so that you don't have to be in a hurry like you are in now.
Explanation: The correct option is:
Both fossil fuels and wind energy can be used to produce electricity. However, burning fossil fuels does pollute the atmosphere, while using Earth's wind does not. Both fossil fuels and wind energy contribute to climate change, but the use of fossil fuels is much more damaging to the environment than the use of wind power.
Fossil fuels are non-renewable sources of energy that are formed over millions of years by the decomposition of organic matter. They release harmful greenhouse gases when burned, contributing to climate change. In contrast, wind energy is a renewable source of energy that uses turbines to harvest the power of wind. Wind energy does not produce any emissions, making it an environmentally friendly alternative to fossil fuels. While wind turbines can have some impacts on wildlife and habitats, the impact is much less severe than the effects of fossil fuel extraction and burning.
Added Part: Fossil fuels are non-renewable sources of energy that are derived from the remains of plants and animals that died millions of years ago. These sources include coal, oil, and natural gas. Wind energy, on the other hand, is a renewable source of energy that is generated by the kinetic energy of wind.
Here are some comparisons between fossil fuels and wind energy:
Environmental Impact: Fossil fuels have a significant negative impact on the environment. Burning fossil fuels produces greenhouse gases that contribute to climate change. The extraction of fossil fuels also has negative impacts on the air, water, and soil. Wind energy, however, has a very small environmental footprint. Wind turbines do not produce any emissions and do not require any water to generate electricity.
Energy Availability: Fossil fuels are abundant and have been the primary source of energy for decades. On the other hand, wind energy is a relatively new source of energy and the technology is still developing. However, the availability of wind energy is significant, as wind is a renewable source that is constantly available.
Sustainability: Fossil fuels are non-renewable, which means they will eventually run out. As the demand for energy continues to increase, the availability of fossil fuels will decrease. Wind energy is a renewable source of energy that will never run out.
Here are some pros and cons of both fossil fuels and wind energy:
Fossil Fuels:
Pros:
Reliable source of energy
High energy density
Large global infrastructure
Cons:
Non-renewable source of energy
Significant environmental impact
Price instability
Wind Energy:
Pros:
Renewable source of energy
Small environmental footprint
Low operating costs
Cons:
High initial costs for building wind turbines
Wind is an inconsistent source of energy
Can create noise pollution for surrounding communities
ontrast the mechanisms of the following two reactions, the dehydration and condensation of ethanol. Part A The first step of dehydration of ethanol is _______. The first step of condensation of ethanol is ________. The first step of dehydration of ethanol is _______. The first step of condensation of ethanol is ________. protonation, deprotonation protonation, protonation deprotonation, protonation deprotonation, deprotonation Request Answer Part B Dehydration of ethanol is __________, condensation of ethanol is __________. Dehydration of ethanol is __________, condensation of ethanol is __________. a substitution, an elimination an elimination, a substitution a substitution, a substitution an elimination, an elimination Request Answer
Answer:
Part A: Protonation, Protonation
Part B: An elimination, A substitution
Explanation:
The dehydration ethanol and the condensation of ethanol all begin from the protonation of ethanol. This is because, water is a good leaving group. Thus, the protonation of the -OH moiety of the molecule is the first step in each mechanism.
The dehydration of ethanol is an elimination reaction because it involves the loss of H-O-H from the ethanol molecule while the condensation of ethanol is an substitution reaction because the -OH moiety is replaced by -OCH2CH3.
Calculate the pH when 90.0 mL of 0.200 M HBr is mixed with 30.0 mL of 0.400 M CH₃NH₂ (Kb = 4.4 × 10⁻⁴).
The pH of the solution is 10.82.
To solve this problem, we need to determine the concentration of the hydronium ion ([tex]H_3O^+[/tex]) in the solution. This can be done using the following steps:
Write the balanced chemical equation for the reaction between HBr and CH₃NH₂.
HBr + CH₃NH₂ → CH₃NH₃⁺ + Br⁻
Write the expression for the base dissociation constant (Kb) for CH₃NH₂.
Kb = [CH₃NH₃⁺][OH⁻]/[CH₃NH₂]
Calculate the concentration of hydroxide ions (OH⁻) in the solution using the Kb value and the concentration of CH₃NH₂.
Kb = [CH₃NH₃⁺][OH⁻]/[CH₃NH₂]
4.4 × 10⁻⁴ = x² / (0.400 M)
x = 6.63 × 10⁻³ M
[OH⁻] = 6.63 × 10⁻³ M
Calculate the concentration of [tex]H_3O^+[/tex] using the equilibrium constant for the reaction between HBr and [tex]H_2O[/tex].
[tex]HBr + H_2O = H_3O^+ + Br^-[/tex]
[tex]Kw = [H_3O^+][OH^-] = 1.0 * 10^{-14}\\[H_3O^+] = Kw/[OH-] = 1.51 * 10^{-11}[/tex]
Calculate the pH using the concentration of [tex]H_3O^+[/tex].
[tex]pH = -log[H_3O^+]\\pH = -log(1.51 * 10^{-11})[/tex]
pH = 10.82
For more question on pH click on
https://brainly.com/question/172153
#SPJ11
Is this answer correct
Answer:
Yes
Explanation:
WHAT IS THE PERCENT OF HYDROGEN IN CU(C2H3O2)2?
WITH SOLUTION
Answer:
Hydrogen H 3.330% Carbon C 26.450% Oxygen O 35.234%
Explanation:
6 Give five is appliedays in which these heat transfer in our everyday life
Heat transfer plays a crucial role in various aspects of our everyday lives. Here are five examples of how heat transfer occurs in our daily activities:
Cooking; Cooling; Central Heating; Ironing; Showering
Cooking: Heat is transferred from a stove or an oven to the cooking utensils and food. Conduction occurs when the heat is transferred through direct contact between the heat source and the cooking pan. Convection takes place when hot air circulates around the food, evenly cooking it. Radiation is also involved when heat is emitted by the heating elements and absorbed by the food.
Cooling: Heat transfer is essential in cooling processes, such as using refrigerators or air conditioning systems. In refrigeration, heat is transferred from the interior of the refrigerator to the outside environment through the process of convection and radiation. In air conditioning, heat is absorbed from the indoor air and released outside, again utilizing convection and radiation.
Central Heating: Many homes and buildings use central heating systems to warm up indoor spaces. Heat is produced by a furnace or boiler and then distributed through convection and radiation. Radiators or air vents release the heated air, raising the temperature in the rooms.
Ironing: Ironing clothes involves the transfer of heat to remove wrinkles. The iron's heating element conducts heat to the metal plate, which comes into direct contact with the fabric. Conduction transfers heat from the iron to the clothes, causing the fibers to relax and remove the wrinkles.
Showering: When taking a hot shower, heat transfer is involved in multiple ways. Firstly, conduction occurs as the hot water comes into contact with your skin, transferring heat. Secondly, convection takes place as the warm water surrounds your body, creating a warm sensation. Lastly, radiation occurs as the hot water radiates heat, making the shower enclosure feel warm.
These are just a few examples, but heat transfer is involved in numerous other activities, from using hairdryers to heating water for tea. Understanding heat transfer is crucial for designing efficient systems and ensuring our comfort and safety in everyday life.
For more question on Heat click on
https://brainly.com/question/30738335
#SPJ11
Calculate the pOH if the [OH-] concentration is 5.9 x 10_, M? Is the solution ACIDIC, BASIC, or NEUTRAL?
If the [OH-] concentration is 5.9 x 10^(-M), the pOH of the solution is approximately -4.77 and the solution is basic.
To calculate the pOH of a solution, we can use the formula:
pOH = -log[OH-]
Given that the [OH-] concentration is 5.9 x 10^(-M), we can substitute this value into the formula:
pOH = -log(5.9 x 10^(-M))
Calculating this expression, we find:
pOH = -log(5.9 x 10^(-M))
pOH ≈ -log(5.9) + (-log(10^(-M)))
Since log(10^(-M)) is equal to -M, the equation simplifies to:
pOH ≈ -log(5.9) - M
Now, we need the value of M (the exponent) to calculate the exact pOH value. It appears that the value of M is missing in the given information. However, assuming M is a positive value, we can continue the calculation.
If we consider M = 6, for instance, the equation becomes:
pOH ≈ -log(5.9) - 6
Now, we can evaluate the expression:
pOH ≈ 1.23 - 6
pOH ≈ -4.77
Therefore, if the [OH-] concentration is 5.9 x 10^(-M), the pOH of the solution is approximately -4.77.
To determine whether the solution is acidic, basic, or neutral, we can use the relationship between pH and pOH. The sum of the pH and pOH of a solution at 25°C is always equal to 14.
Since pOH = -4.77, the pH would be:
pH = 14 - pOH
pH ≈ 14 - (-4.77)
pH ≈ 18.77
A solution with a pH above 7 is considered basic. In this case, the calculated pH is greater than 7. Therefore, the solution is basic.
for more questions on pOH
https://brainly.com/question/1420583
#SPJ11
Which of the following is a true statement about the Earths tectonic plates?
Answer:
Pretty sure it's C
Explanation:
Which statement correctly describes atoms? *
-Atoms combine to make all the substances on Earth.
-Atoms of all substances have the same chemical properties.
-Atoms are easily destroyed when matter is cooled or heated.
-Atoms come in different sizes, but most are visible using a simple hand lens.
Answer: Atoms combine to make all the substances on Earth.
Explanation:
Atom is a smallest entity of any matter. The atoms of different elements combine together in order to form new substances. The atoms have electrons, neutrons, as well as protons. The atoms are combined by the chemical bond. When two or more atoms combine they form a molecule. The molecules combine to form compound. Atoms cannot be broken into sub parts. The two atoms of hydrogen and one of oxygen forms water which is an essential liquid on planet earth. Other substances like carbon dioxide, coal, and sodium chloride.
20/ The IUPAC name of (CH3)3 CCH₂COOH is:- A/ 3, 3-dimethyl butanoic acid B/ 3-methyl pentanoic acid C/ Hexanoic acid D/2, 3-dimethyl butanoic acid
Answer:
I guess correct option is A.
Please help for brainliest
Curious Carl's chemistry teacher asked him to make a sugar solution. Carl dissolved 400 grams of sucrose (C12H22O11 , molar mass 342.3mol) in 1.00 L of water.
If molarity = moles/liter, what is the molarity of Carl's sugar solution?
Question 31 options:
1.2 M
0.86 M
0.40 M
1.0 M
Answer:
The molarity of Carl's sugar solution can be calculated using the formula:
Molarity = moles of solute / liters of solution
First, we need to determine the number of moles of sucrose in the solution. We can do this using the formula:
moles = mass / molar mass
The mass of sucrose is 400 grams, and the molar mass is 342.3 g/mol:
moles = 400 g / 342.3 g/mol
moles = 1.167 mol
Now we can calculate the molarity by dividing the moles by the liters of solution (which is 1.00 L):
Molarity = 1.167 mol / 1.00 L
Molarity = 1.2 M
Therefore, the molarity of Carl's sugar solution is 1.2 M. Answer: 1.2 M.
Explanation:
Question 6
How many moles of carbon is found in 98.22g of carbon?
Answer:8.18 moles C
Explanation:
98.22g x 1 mole C/ 12.011g = 8.18 moles C
Which is the formula for nitrogen trihydride? NH3 N3H 3NH N3H3
NH3
N3H
3NH
N3H3
Answer:
NH3
Explanation:
The "tri" attached to the trihydride means 3. So your hydrogen is going to have 3 atoms.
Answer:
All Answers only for the elite; Nomenclature of Covalent Compounds Quiz
You're Welcome :)
Explanation:
A-hydrochloric acid
B-sulfuric acid
C-dinitrogen pentoxide
C- IBr3
A- carbon dioxide
B- Start the name with hydro-.
B- H3BO3
C-sulfur trioxide
A- NH3
B- The chemical name ends with “hydroxide.”
Arsenate (AsO43-) is structurally and chemically similar to inorganic phosphate (PO43-), and many enzymes that act on phosphate will also use arsenate as a substrate if it is available. However, unlike phosphates, organic compounds of arsenate are kinetically unstable. For example, acyl phosphates (such as 1,3-bisphosphoglycerate) require an enzyme to catalyze phosphate hydrolysis on a biologically relevant timescale, but acyl arsenates hydrolyze almost instantaneously in water without an enzyme.
a) Predict the effect on the net reaction catalyzed by glyceraldehyde 3-phosphate dehydrogenase if phosphate were replaced by arsenate.
b) Write a balanced overall equation for the conversion of glucose to pyruvate in the presence of ATP, ADP, NAD+, and arsenate.
c) Arsenate is extremely toxic to most organisms. Based on your answers above, explain why.
Answer:
A) The effect on the net reaction catalyzed by glyceraldehyde is that
The 1-arsen0, 3-phosphoglycerate will decompose without enzymes hence no ATP will be formed in the reaction ( phosphoglycerate Kinase )
B) There will be no conversion of ADP to ATP from the conversion of glucose to pyruvate hence No balanced overall equation can be derived
C ) Arsenate is very toxic to most organisms and it is used mostly regarded as poisons during the formation of glycolysis, it forms 1-arsen0, 3-phosphoglycerate which hinders the formation of ATP because it is unstable and will hydrolyze quickly, this will also lead to the reduction in oxygen in cells thereby leading to the death of cells
Explanation:
A) The effect on the net reaction catalyzed by glyceraldehyde is that
The 1-arsen0, 3-phosphoglycerate will decompose without enzymes hence no ATP will be formed in the reaction ( phosphoglycerate Kinase )
B) There will be no conversion of ADP to ATP from the conversion of glucose to pyruvate hence No balanced overall equation can be derived
C ) Arsenate is very toxic to most organisms and it is mostly regarded as poisons during the formation of glycolysis, it forms 1-arsen0, 3-phosphoglycerate which hinders the formation of ATP because it is unstable and will hydrolyze quickly, this will also lead to the reduction in oxygen in cells thereby leading to the death of cells
Those structures that are similar in all behavior is called homologous structure.
The answer of the following question is as follows:-
The effect on the net reaction catalyzed by glyceraldehyde is that the 1-arsen0, 3-phosphoglycerate will decompose without enzymes hence no ATP will be formed in the reaction ( phosphoglycerate Kinase ) There will be no conversion of ADP to ATP from the conversion of glucose to pyruvate hence No balanced overall equation can be derived Arsenate is very toxic to most organisms and it is used mostly regarded as a poison during the formation of glycolysis, it forms 1-arsen0, 3-phosphoglycerate which hinders the formation of ATP because it is unstable and will hydrolyze quickly, this will also lead to the reduction in oxygen in cells thereby leading to the death of a cell.For more information, refer to the link:-
https://brainly.com/question/15804584
Should vaccinations be required for students to attend public school?
Answer:
I don't think so for now, there hasn't been much research done with the vaccine and children so we really don't know how children's bodies will react to it. Once more studies are done with the vaccine and children and is proven safe then yes, kids should use it in order to attend public school.
What is the pH of a solution that has a [OH-] concentration equal to 1.36 × 10-10 M?
4.13
O 9.89
7.00
O 5.00
Answer:
Explanation:
pOH = -log1.36 X 10^-10 = 9.87
pH = 14-pOH = 14-8.97 = 5.03
what is the hardest part of the periodic table?
Answer:
carbon
Explanation:
I hope this helps :)
Answer:
carbon
Explanation:
YOU CAN MARK ME AS BRAINIEST IF YOU WANT
Which term names an icy object that orbits the sun and has a tail?
meteorite
comet
meteor
asteroid
Answer:
Comets are small, icy objects that have very elliptical orbits. When they are close to the Sun, they form comas and tails, which glow and make the comet more visible.
Explanation:
Hope This Helps!!
(brainliest please, if possible)
Answer:
comet's
Explanation:
what the other user said
Which of the following compounds contain sterogenic centres (stereocentres)?
The compound that contains sterogenic centre is the 1,3,4-trichloropentane. That is option F.
What are sterogenic centres of a compound?Sterogenic centers are found in compounds where a carbon atom share four bonds to the carbon atom with each to different elements or functional groups.
From the list of example given above, the carbon atom of which Ch the second chloride is attached to is sharing bonds with carbon, hydrogen, chloride and another carbon.
Learn more about atom here:
https://brainly.com/question/20994647
#SPJ1
The engineering process defines the steps engineers take to create
technology. Which of these describes these steps in the correct order?
A. Identifying a need, researching the background of that need,
making a plan to meet the need, doing the work, evaluating the
results, looking for improvements
B. Identifying a problem, making a solution, testing the solution,
mass production, making improvements
C. Identifying a problem, testing various solutions, researching side
effects of each solution, choosing a solution, looking to improve
the solution, planning how to test the solution
OD. Identifying a problem, brainstorming solutions, researching the
background of each solution, testing solutions, choosing a
solution, production, making future improvements
The steps in the engineering process in order is D. Identifying a problem, brainstorming solutions, researching the background of each solution, testing solutions, choosing a solution, production, making future improvements.
What are the steps of the engineering process ?The initial step involves recognizing the predicament that requires resolution. One may achieve this through collaborating with fellow engineers, consulting customers, or conducting studies. After recognizing the issue at hand, the subsequent course of action involves generating ideas or solutions to address it. One way to achieve this is to generate a large number of ideas.
The subsequent phase necessitates the experimentation of potential answers. To achieve this, one must take into account both the outcomes of the assessments and the advantages and disadvantages associated with every proposed resolution. The subsequent action entails generating the resolution. One way to accomplish this is to create a prototype, while another is to manufacture the solution in large quantities. The last stage involves enhancing forthcoming developments.
Find out more on the engineering process at https://brainly.com/question/19369851
#SPJ1
Please if you know the answer put it thanks
The diagram shows a picture of a compound.
What is a compound?A compound is a substance that is made up of two or more different elements that are chemically bonded together in a specific ratio.
This means that the elements are combined in a way that creates a new substance with different physical and chemical properties than the individual elements.
Compounds can be formed through a variety of chemical reactions, such as combining elements through a chemical bond or through a reaction between an acid and a base.
So for the given diagram, we can see that it represents two or more elements chemically combined.
Learn more about a compound here: https://brainly.com/question/29108029
#SPJ1
What is the energy of light with a wavelength of 589 nm? (The speed of light
in a vacuum is 3.00 × 108 m/s, and Planck's constant is 6.626 × 10-34 J.s.)
The energy of light with a wavelength of 589 nm is approximately 3.36 × 10^(-19) Joules.
To calculate the energy of light, we can use the equation E = hc/λ, where E represents the energy, h is Planck's constant (6.626 × 10^(-34) J·s), c is the speed of light in a vacuum (3.00 × 10^8 m/s), and λ is the wavelength of light.
Given that the wavelength is 589 nm (which is equivalent to 589 × 10^(-9) m), we can substitute the values into the equation:
E = (6.626 × 10^(-34) J·s × 3.00 × 10^8 m/s) / (589 × 10^(-9) m)
Simplifying the equation, we get:
E = (1.9778 × 10^(-25) J·m) / (5.89 × 10^(-7) m)
Dividing these values, we find:
E ≈ 3.36 × 10^(-19) J
For more such questions on energy
https://brainly.com/question/30128198
#SPJ11
URGENT HELP
Which of the following experimental plans will test the effects of pressure on a reaction with gases and what is
the expected result?
A Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.
B Keep pressure constant and increase the temperature of the reaction; reaction rate will decrease.
C Keep temperature constant and decrease the pressure of the reaction; reaction rate will increase.
D Keep pressure constant and decrease the temperature of the reaction; reaction rate will increase.
Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.
option A.
What is Boyle's law?Boyle's law states that pressure of a given mass of a gas is directly proportional to its volume provided, temperature of the gas is kept constant.
Le Chatelier's Principle states that if a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium shifts to counteract the change to reestablish an equilibrium.
So the experimental plans that will test the effects of pressure on a reaction with gases and its expected result is keep temperature constant and increase the pressure of the reaction; reaction rate will increase.
Thus, option A is the correct answer.
Learn more about pressure of reaction here: https://brainly.com/question/30917518
#SPJ1
Which substance below would have particles with the SLOWEST average velocity at 300 K?
Fluorine, F2
Chlorine, Cl2
Methane, CH4
Xenon, Xe
Answer:
Likely Xenon, [tex]\rm Xe[/tex].
Explanation:
The average kinetic energy of particles of a gas at a given temperature and pressure should be the same (regardless of the exact composition of the particle.)
For example, let [tex]m_1[/tex] and [tex]m_2[/tex] denote the mass of each particle of two gases, and let [tex]v_1[/tex] and [tex]v_2[/tex] denote the average speed of particles of each gas.
Average kinetic energy of particles of the first gas: [tex]\displaystyle {\rm KE_1} = \frac{1}{2}\, m_1 \cdot ({v_1})^{2}[/tex].
Average kinetic energy of particles of the second gas: [tex]\displaystyle {\rm KE_2} = \frac{1}{2}\, m_2 \cdot ({v_2})^{2}[/tex].
If the temperature of these two gases are the same, [tex]\rm KE_1 = KE_2[/tex]. Hence:
[tex]\displaystyle \frac{1}{2}\, m_1 \cdot ({v_1})^{2}= \frac{1}{2}\, m_2 \cdot ({v_2})^{2}[/tex].
[tex]\displaystyle \frac{v_1}{v_2} = \frac{\sqrt{m_2}}{\sqrt{m_1}}[/tex].
In other words, the average velocity of particles of each gas (at the same temperature and pressure) is inversely proportional to the square root of the mass of one particle of each gas.
Similarly, at the same temperature and pressure, particles of the four gases in this question would have the same average kinetic energy. However, the gas with the largest per-particle mass would have the slowest average velocity for its particles.
Look up the relative atomic mass of the particles:
[tex]\rm F[/tex]: [tex]18.998[/tex].[tex]\rm C[/tex]: [tex]12.011[/tex].[tex]\rm H[/tex]: [tex]1.008[/tex].[tex]\rm Cl[/tex]: [tex]35.45[/tex].[tex]\rm Xe[/tex]: [tex]131.293[/tex].Calculate the formula mass of each gas. That value would be proportional to the average mass of each particle of the gas:
[tex]\begin{aligned}M(\rm F_2) &= (2 \times 18.998)\; \rm g\cdot mol^{-1}\\ &= 37.996\; \rm g\cdot mol^{-1}\end{aligned}[/tex].[tex]\begin{aligned}M(\rm Cl_2) &= (2 \times 35.45)\; \rm g\cdot mol^{-1}\\ &= 70.90\; \rm g\cdot mol^{-1}\end{aligned}[/tex].[tex]\begin{aligned}M(\rm CH_4) &= (12.011 + 4 \times 1.008)\; \rm g\cdot mol^{-1}\\ &= 16.043\; \rm g\cdot mol^{-1}\end{aligned}[/tex].[tex]\begin{aligned}M(\rm Xe) &= 131.293\; \rm g \cdot mol^{-1}\end{aligned}[/tex].Among these four gases, each particle of xenon, [tex]\rm Xe[/tex], has the largest per-particle mass. Hence, at the same temperature and pressure, particles of Xenon would have the slowest average velocity among these gases.
Circuit A has a resistance of 7.5 ohms, and circuit B has a resistance of 5 ohms. Which statement about the circuits must be correct?
If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is equal to the current in circuit B
If the current in circuit A is equal to the current in circuit B, then the voltage in circuit A is less than the
voltage in circuit B
If the current in circuit A is less than the current in circuit B, then the voltage in circuit A is less than the
voltage in circuit B
If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the
current in circuit B
Answer:
If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the current in circuit B
Explanation:
To know the the correct answer to the question, do the following:
Case 1: Let the circuit A and B have equal voltage say 24 V.
For Circuit A:
Voltage (V) = 24 V
Resistance (R) = 7.5 ohms
Current (I) =?
V = IR
24 = I × 7.5
Divide both side by 7.5
I = 24 / 7.5
I = 3.2 A
For Circuit B:
Voltage (V) = 24 V
Resistance (R) = 5 ohms
Current (I) =?
V = IR
24 = I × 5
Divide both side by 5
I = 24 / 5
I = 4.8 A
Thus for the same voltage, current in circuit A is less than the current in B.
Case 2: Let circuit A and B have equal current say 2 A
For circuit A:
Current (I) = 2 A
Resistance (R) = 7.5 ohms
Voltage (V) =?
V = IR
V = 2 × 7.5
V = 15 V
For Circuit B:
Current (I) = 2 A
Resistance (R) = 5 ohms
Voltage (V) =?
V = IR
V = 2 × 5
V = 10 V
Thus, for the same current, the voltage in circuit A is greater than the voltage in B
Case 3: Let circuit A have a current of 4 A and circuit B have a current of 5 A
For circuit A:
Current (I) = 4 A
Resistance (R) = 7.5 ohms
Voltage (V) =?
V = IR
V = 4 × 7.5
V = 30 V
For circuit B:
Current (I) = 5 A
Resistance (R) = 5 ohms
Voltage (V) =?
V = IR
V = 5 × 5
V = 25 V
Thus, when the current in circuit A is less than the current in circuit B, the voltage in circuit A is greater than the voltage in circuit B.
From the illustrations above and the options given in the question, the current answer is:
If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the current in circuit B
Which type of mutation has no effect on protein function?
A silent mutation is a type of mutation that has no effect on protein function. This is because the mutation does not change the amino acid sequence of the protein.
What is silent mutations ?Silent mutations can happen when a single base pair in the DNA is altered without changing the amino acid that the codon is meant to encode. For instance, a silent mutation could turn the initial G in the codon for the amino acid alanine from GCG to A, creating the codon GCA. The function of the protein is unaffected since the codon GCA still codes for the amino acid alanine.
The most frequent sort of mutation is a silent mutation, which can be brought on by a number of things, including mistakes in DNA replication, contact with environmental mutagens, and random chance. Silent mutations typically have no detrimental effects on the organism.
Learn more about silent mutations here : brainly.com/question/30280461
#SPJ1
Read each question carefully, and answer yes or no to each one. At the end of each section, follow the directions to score your answers (pay close attention as the directions for scoring may change for each section). After you complete the entire assessment, total the points from all seven sections. This will give you a total health score. The higher the score, the more healthy your lifestyle. If you feel you have a low score, look back through the assessment and identify areas where you can change your unhealthy habits, and explain what changes you would make and why. Write your assessment in the essay box below.
Section 1: Physical Fitness
Do you exercise or play a sport for at least 30 minutes three or more times a week?
Do you stretching before and after exercising?
Do you warm up before exercising and cool down afterwards?
Do you think that you are at a healthy weight?
Are you mostly happy with the way your body looks and feels?
Do you think you have enough energy?
Give yourself one point for each No response and two points for each Yes response. Section score: ____
Section 2: Family History
Do you have a family member who:
has high blood pressure?
has diabetes?
has heart disease?
has cancer?
is extremely overweight?
Give yourself one point for each Yes response and two points for each No response. Section score: ____
Section 3: Hygiene and Medical Care
Do you floss your teeth every day?
Do you brush your teeth at least twice a day?
Do you visit the dentist at least once a year?
Do you use sunscreen?
Do you know basic first aid?
Are all your immunizations current?
Do you get your vision and hearing checked each year?
Do you see the doctor for a check-up once each year?
Do you feel you get enough sleep at night?
Do you know the warning signs for cancer?
Give yourself one point for each No response and two points for each Yes response. Section score: ____
Section 4: Nutrition
Do you eat a lot of red meat or eggs?
Do you add salt to your food?
Do you add sugar to your food?
Do you eat a lot of high-fat or high-sugar foods?
Do you add butter or cheese to your food?
Do you choose fried foods more often than baked or broiled foods?
Do you drink caffeinated drinks, such as coffee or sodas?
Do you skip meals?
Give yourself one point for each Yes response and two points for each No response. Section score: ____
Section 5: Drug Use
Do you smoke or chew tobacco?
Do you drink alcohol?
Have you ever used marijuana or other illegal drugs?
Have you ever abused a prescription drug?
Give yourself zero points for each Yes response and two points for each No response. Section score: ____
Section 6: Safety
Have you ever ridden with drivers who were under the influence of alcohol or drugs?
Have you ever ridden with drivers who speed or disobey traffic laws?
Do you ever forget to wear your seat belt?
Do you ever forget to wear a helmet when riding a bike or skateboarding?
Do you ever play with matches or hazardous materials?
Is there a gun in your house?
Give yourself zero points for each Yes response and two points for each No response. Section score: ____
Section 7: Emotional and Social Health
Do you have hobbies or activities that you enjoy?
Do you give your best effort when doing your work?
Do you find it easy to laugh?
Do you express anger in an appropriate way?
Do you easily fall asleep at night?
Do you share personal problems with someone you trust?
Do you feel well liked by others?
Do you have someone you can turn to if you need help?
Are your family members and close friends in good health?
Are you generally happy?
Give yourself one point for each No response and two points for each Yes response. Section score: ____
Total Health Score: ____
Answer:
Yes
Yes
Yes
All yes
Explanation: