A movie ends at 7:45 P.M. The next movie begins 50 minutes later. What time does the next movie begin?

The equation of the tangent plane to the surface x=h(y,z) at the point (5,2,-1) is (x - 5) = 5(y - 2) + 2(z + 1), where the partial derivatives ∂h/∂y(2,-1) = 5 and ∂h/∂z(2,-1) = 2 are used to determine the slope of the surface at that point.

The tangent plane to a surface at a given point is a flat plane that touches the surface at that point and has the same slope as the surface. In other words, the tangent plane gives an approximation of the surface in a small region around the given point.

Now, to find the equation of the tangent plane to the surface x=h(y,z) at the point (5,2,-1), we need to determine the slope of the surface at that point. This slope is given by the partial derivatives of the function h with respect to y and z at the point (2,-1), as specified in the problem.

Using these partial derivatives, we can write the equation of the tangent plane in the form:

(x - 5) = 5(y - 2) + 2(z + 1)

Here, (5,2,-1) is the point on the surface at which we want to find the tangent plane, and the partial derivatives ∂h/∂y(2,-1) = 5 and ∂h/∂z(2,-1) = 2 specify the slope of the surface at that point in the y and z directions, respectively.

To know more about tangent plane here

https://brainly.com/question/31433124

#SPJ4

The value of x is 19.79.

Given base of a right angled triangle as 14, hypotenuse is marked as x.

Firstly calculate the perpendicular of the right angled triangle with the help of trigonometric functions,

tanα= perpendicular/base

tan45°= 14/base

tan45°=1

1= 14/base

base=14

Now using Pthagorean theorem,

We know by Pythagoras theorem, square of the hypotenuse is equal to the sum of the squares of the legs,

Hypotenuse² = Perpendicular² + Base ²

Substitute the values of perpendicular and base in the pythagorean theorem,

x² = 14² + 14²

x² = 196 +196

x=√392

x= 19.79

Hypotenuse of a right angled triangle is 19.79 .

Know more about hypotenuse here,
https://brainly.com/question/31658142

#SPJ1

In a spring-mass system, the restoring force of the spring and the damping force play a crucial role in governing the motion of the mass. However, in an aging system, these forces may weaken exponentially over time, leading to changes in the dynamics of the system.

Consider the initial value problem of an aging spring-mass system, where the equation of motion of the mass is governed by weakened restoring and damping forces. The solution to this problem involves finding the displacement of the mass over time.

One approach to solving this problem is to use the theory of differential equations. We can use the equation of motion and apply the necessary mathematical tools to find the solution. Alternatively, we can use numerical methods such as Euler's method or the Runge-Kutta method to obtain approximate solutions.

As the restoring and damping forces weaken over time, the system's motion becomes less oscillatory and more damped. The amplitude of the oscillations decreases, and the frequency of the oscillations also decreases. The system eventually approaches an equilibrium state where the mass comes to rest.

In conclusion, an aging spring-mass system with weakened restoring and damping forces is an interesting problem in the field of physics and engineering. Understanding the dynamics of such systems can be useful in predicting the behavior of real-world systems that degrade over time.

Learn more about  spring-mass system here:

https://brainly.com/question/31593319

#SPJ11

A random variable is a quantity that takes on different values depending on the outcome of a random process. In this case, we are given a random variable with a probability density function (pdf) of [tex]f(x)=4 e^{-4x},x>=0[/tex]. A pdf is a function that describes the probability distribution of a continuous random variable.

To find the probability of the random variable being between 0.5 and 1, we need to integrate the pdf over the range of 0.5 to 1. The integral of f(x) from 0.5 to 1 is:

integral from 0.5 to 1 of [tex]4 e^{-4x} dx[/tex]

To solve this integral, we can use integration by substitution. Let u=-4x, then [tex]\frac{du}{dx} = 4[/tex] and [tex]dx=\frac{-du}{4}[/tex]. Substituting in the integral, we get:

integral from -2 to -4 of [tex]-e^u du[/tex]

Integrating this, we get:

[tex]-[-e^u][/tex]from -2 to -4 =[tex]-[e^-4 - e^-2][/tex]
Rounding this to the third decimal place, we get:

0.018

Therefore, the probability of the random variable being between 0.5 and 1 is 0.018. It is important to note that the answer is in decimal form because the random variable is continuous. If it were discrete, the answer would be in whole numbers.

Learn more about probability here:

https://brainly.com/question/30034780

#SPJ11

The distance between the two honey bees is approximately 34.80 meters.

We can use the cosine law to find the distance between the two honey bees.

Let A be the position of bee X, B be the position of bee Y, and C be the position of the hive.

Then, we have AB² = AC² + BC² - 2AC × BC × cos(113°),

Here AB is the distance between the two bees, AC is the distance from the hive to bee X, and BC is the distance from the hive to bee Y.

Since bee X flies 29m due south, we have AC = 29.

Since bee Y flies 11m on a bearing of 113°, we have BC = 11.

Substituting these values into the formula gives :

AB² = 29² + 11² - 2 × 29 × 11 × cos(113°)

AB² = 841 + 121 + 249.28

AB² = 1211.28.

AB = 34.80

Therefore, the distance between the two honey bees is approximately 34.80 meters.

Learn more about the cosine rule here:

https://brainly.com/question/29717637

#SPJ1

Analysis, we can conclude that W = {f ∈ V : f(a) = f(b)} is Indeed a subspace of V

To determine whether the set W = {f ∈ V : f(a) = f(b)} is a subspace of V, we need to check three properties:

The zero vector is in W.

W is closed under vector addition.

W is closed under scalar multiplication.

Let's analyze each property:

Zero vector: The zero vector in V is the constant function f(x) = 0 for all x in [a, b]. This function satisfies f(a) = f(b) = 0, so the zero vector is in W.

Vector addition: Suppose f1 and f2 are two functions in W. We need to show that their sum, f1 + f2, is also in W. Let's evaluate (f1 + f2)(a) and (f1 + f2)(b):

(f1 + f2)(a) = f1(a) + f2(a) = f1(b) + f2(b) = (f1 + f2)(b)

Since (f1 + f2)(a) = (f1 + f2)(b), the sum f1 + f2 satisfies the condition for W. Therefore, W is closed under vector addition.

Scalar multiplication: Let f be a function in W and c be a scalar. We need to show that the scalar multiple cf is also in W. Let's evaluate (cf)(a) and (cf)(b):

(cf)(a) = c * f(a) = c * f(b) = (cf)(b)

Since (cf)(a) = (cf)(b), the scalar multiple cf satisfies the condition for W. Therefore, W is closed under scalar multiplication.

Based on the above analysis, we can conclude that W = {f ∈ V : f(a) = f(b)} is indeed a subspace of V

To know more about Indeed .

https://brainly.com/question/17710449

#SPJ11

The solution is;6 + 8x − 3y = 11.

Given equation is 8x − 3y = 5To find the value of 6 + 8x − 3y, we need to simplify the expression as follows;6 + 8x − 3y = (8x − 3y) + 6 = 5 + 6 = 11Since the equation is true, the value of 6 + 8x − 3y is 11. Therefore, the solution is;6 + 8x − 3y = 11.

Learn more about equation here,

https://brainly.com/question/29174899

#SPJ11

To graph the curve represented by the parametric equations x = 3(−sin(t)) and y = 3(1 − cos(t)), we can use a graphing utility like Desmos or GeoGebra

The direction of the curve can be determined by observing the movement of the parameter t. As t increases, the curve moves in a counterclockwise direction. Similarly, as t decreases, the curve moves in a clockwise direction.

In the graph, the curve starts at the point (0, 0) when t = 0 and continuously moves in a loop, forming the characteristic shape of a cycloid. The curve repeats itself as t increases or decreases.

Please note that the scale of the graph may vary depending on the specific settings of the graphing utility used.

To learn more about  graph click here:

brainly.com/question/32291843

#SPJ11

To find the equation of the tangent line to the graph of the function f(x) at x = a, we can use the extension of the power rule. The equation of the tangent line to the graph of the function f(x) = (9x/3) + 5 at x = 27 is           y = 9x - 232.

To find the equation of the tangent line to the graph of the function f(x) at x = a, we can use the extension of the power rule, which states that if   f(x) = x^n, then f'(x) = nx^(n-1).

First, we find the derivative of f(x) using the power rule:

f(x) = (9x/3) + 5

f'(x) = 9/3

Next, we evaluate f'(x) at x = 27:

f'(27) = 9/3 = 3

This gives us the slope of the tangent line at x = 27. To find the y-intercept of the tangent line, we need to find the y-coordinate of the point on the graph of f(x) that corresponds to x = 27. Plugging x = 27 into the original equation for f(x), we get:

f(27) = (9*27)/3 + 5 = 82

Therefore, the point on the graph of f(x) that corresponds to x = 27 is (27, 82). We can now use the point-slope form of the equation of a line to find the equation of the tangent line:

y - 82 = 3(x - 27)

Simplifying this equation gives:

y = 3x - 5*3 + 82

y = 3x - 232

Therefore, the equation of the tangent line to the graph of the function f(x) = (9x/3) + 5 at x = 27 is y = 3x - 232, which is in slope-intercept form.

Learn more about slope-intercept form  here:

https://brainly.com/question/29146348

#SPJ11

A diagonal matrix can only be orthogonal if all of its diagonal entries are either 1 or -1.

For a matrix to be orthogonal, it must satisfy the condition that its transpose is equal to its inverse. For a diagonal matrix, the transpose is simply the matrix itself, since all off-diagonal entries are zero. Therefore, for a diagonal matrix to be orthogonal, its inverse must also be equal to itself. This means that the diagonal entries must be either 1 or -1, since those are the only values that are their own inverses. Any other diagonal entry would result in a different value when its inverse is taken, and thus the matrix would not be orthogonal. It's worth noting that not all diagonal matrices are orthogonal. For example, a diagonal matrix with all positive diagonal entries would not be orthogonal, since its inverse would have different diagonal entries. The only way for a diagonal matrix to be orthogonal is if all of its diagonal entries are either 1 or -1.

Learn more about orthogonal here

https://brainly.com/question/30772550

#SPJ11

The statement is true. If two events are mutually exclusive, they have no outcomes in common. This means that the occurrence of one event excludes the possibility of the occurrence of the other event. In other words, both events cannot happen simultaneously.

For example, flipping a coin and rolling a die are mutually exclusive events because the outcome of one event does not affect the outcome of the other.
To further clarify, let's consider an example of two events that are not mutually exclusive. Let's say we are drawing a card from a deck of cards, and we are interested in two events: drawing a heart and drawing a face card. These two events are not mutually exclusive because there are face cards that are also hearts (e.g., King of Hearts). Therefore, the events have outcomes in common, and they can happen at the same time.
In summary, two events are mutually exclusive if they cannot happen at the same time and have no outcomes in common. It is an important concept in probability theory and is often used in calculating the probability of combined events.

Learn more about mutually exclusive events here:

https://brainly.com/question/28565577

#SPJ11

It is possible to create a shape resembling a parallelogram by rotating a triangle around the midpoint of one of its sides.

Parallelograms do have several special properties, much like triangles. While triangles have a multitude of properties, such as Pythagorean theorem, congruence criteria, and the sum of angles equaling 180 degrees, parallelograms also possess distinct characteristics.

A parallelogram is a quadrilateral with opposite sides that are parallel and congruent. Some of the key properties of parallelograms include:

1. Opposite sides are parallel: This means that the opposite sides of a parallelogram never intersect and can be extended indefinitely without meeting.

2. Opposite sides are congruent: The lengths of the opposite sides of a parallelogram are equal.

3. Opposite angles are congruent: The measures of the opposite angles in a parallelogram are equal.

4. Consecutive angles are supplementary: The sum of two consecutive angles in a parallelogram is always 180 degrees.

By rotating a triangle around the midpoint of one of its sides, a parallelogram-like shape can indeed be created. This demonstrates that the properties of parallelograms can be related to those of triangles. However, it is important to note that while both triangles and parallelograms have their unique properties, they also have distinct characteristics that differentiate them from each other.

Learn more about parallelogram here:

https://brainly.com/question/28854514

#SPJ11

The triple integral over the bounded region E, where E = {(x, y, z) | -2 ≤ x ≤ 2, -4 - x^2 ≤ y ≤ 4 - x^2, 0 ≤ z ≤ 4 - x^2 - y^2}, can be evaluated as ∫∫∫E dV = ∫∫∫E dx dy dz, where the limits of integration are -2 ≤ x ≤ 2, -4 - x^2 ≤ y ≤ 4 - x^2, and 0 ≤ z ≤ 4 - x^2 - y^2.

To evaluate the triple integral over the region E, we can set up the integral as ∫∫∫E dV,

where dV represents the infinitesimal volume element. Since the region E is defined by specific bounds for x, y, and z, we can rewrite the integral as ∫∫∫E dx dy dz.

We integrate over the region E by performing the nested integrals with the appropriate limits of integration.

For this region, the limits are given as -2 ≤ x ≤ 2, -4 - x^2 ≤ y ≤ 4 - x^2, and 0 ≤ z ≤ 4 - x^2 - y^2.

Thus, the triple integral over the bounded region E is ∫∫∫E dV = ∫∫∫E dx dy dz with the limits of integration -2 ≤ x ≤ 2, -4 - x^2 ≤ y ≤ 4 - x^2, and 0 ≤ z ≤ 4 - x^2 - y^2.

By evaluating this integral, we can determine the volume of the region E.

Learn more about triple integral here: brainly.com/question/30404807

#SPJ11

The range of the function f(x) = 10.00x + 15.50 is {15.50, 25.50, 35.50, . . , 145.50, 155.50, 165.50}.

The given function f(x) = 10.00x + 15.50 models the total daily pay of Paul when he washes x cars. Here, x is the independent variable that denotes the number of cars Paul washes in a day, and f(x) is the dependent variable that denotes his total daily pay.In this function, the coefficient of x is 10.00, which means that for each car he washes, Paul gets $10.00. Also, the constant term is 15.50, which represents the fixed pay he receives for washing 0 cars in a day, that is, $15.50.Therefore, to find the range of this function, we need to find the minimum and maximum values of f(x) when 0 ≤ x ≤ 15, because Paul can wash at most 15 cars in a day.The minimum value of f(x) occurs when x = 0, which means that Paul does not wash any car, and he gets only the fixed pay of $15.50. So, f(0) = 10.00(0) + 15.50 = 15.50.The maximum value of f(x) occurs when x = 15, which means that Paul washes 15 cars, and he gets $10.00 for each car plus the fixed pay of $15.50. So, f(15) = 10.00(15) + 15.50 = 165.50.Therefore, the range of the function is 0 ≤ f(x) ≤ 165.50, that is, {15.50, 25.50, 35.50, . . , 145.50, 155.50, 165.50}.

Hence, the range of the function f(x) = 10.00x + 15.50 is {15.50, 25.50, 35.50, . . , 145.50, 155.50, 165.50}.

To know more about function, click here

https://brainly.com/question/30721594

#SPJ11

The set f is not a function from Z to Z.

The set f = {(x, y) ∈ Z × Z : x^3y = 4} is not a function from Z to Z because for some values of x, there may be multiple values of y that satisfy the equation x^3y = 4, which violates the definition of a function where each element in the domain must be paired with a unique element in the range.

For example, when x = 2, we have 2^3y = 4, which gives us y = 1/4. However, when x = -2, we have (-2)^3y = 4, which gives us y = -1/8. Therefore, for x = 2 and x = -2, there are two different values of y that satisfy the equation x^3y = 4. Hence, the set f is not a function from Z to Z.

To know more about function refer here:

https://brainly.com/question/12431044

#SPJ11

Probability is a measure of the likelihood or chance of an event occurring.

a. To find the percentage of years where Ithaca gets more than 40" of rain, we need to calculate the z-score for this value and then use a standard normal table to find the percentage. The z-score is:

z = (40 - 35.4) / 4.2 = 1.33

From a standard normal table, we find that the percentage of values above z = 1.33 is approximately 9.87%. Therefore, during about 9.87% of years, Ithaca gets more than 40" of rain.

b. To find the value of rainfall corresponding to the driest 20% of years, we need to calculate the z-score for the 20th percentile and then convert it back to rainfall units. The z-score is:

z = invNorm(0.20) = -0.84

where invNorm is the inverse normal function. Therefore,

-0.84 = (x - 35.4) / 4.2

Solving for x, we get:

x = 32.2"

So less than 32.2" of rain falls in the driest 20% of all years.

c. Since the sample size n = 4 is small and the population standard deviation is unknown, we need to use the t-distribution to describe the sampling distribution model of the sample mean. However, since the sample size is small, we also need to assume that the population follows a normal distribution.

Under these assumptions, the sampling distribution of the sample mean is approximately normal with a mean of μ = 35.4" and a standard error of σ/√n = 4.2/√4 = 2.1". Therefore, the sampling distribution of the sample mean is:

t(3, 35.4, 2.1)

where t denotes the t-distribution, 3 is the degrees of freedom (n - 1), 35.4 is the mean, and 2.1 is the standard error.

d. To find the probability that the 4-year average is less than 30", we need to calculate the z-score for this value and then use the t-distribution with 3 degrees of freedom to find the probability. The z-score is:

z = (30 - 35.4) / (4.2 / √4) = -2.57

Using a t-table or calculator with 3 degrees of freedom, we find that the probability of a t-value less than -2.57 is approximately 0.041. Therefore, the probability that those 4 years average less than 30" of rain is approximately 0.041 or 4.1%.

To learn more about percentage visit:

brainly.com/question/29306119

#SPJ11

The acceptable dimensions for this to be a quality part is 149.995 inch and 150.005 inch.

Given, Specified dimension of a part is 150 inch .Blueprint indicates that all decimal tolerances are ±0.005 inch. Tolerances are the allowable deviation in the dimensions of a component from its nominal or specified value. The acceptable dimensions for this to be a quality part is calculated as follows :Largest acceptable size of the part = Specified dimension + Tolerance= 150 + 0.005= 150.005 inch .Smallest acceptable size of the part = Specified dimension - Tolerance= 150 - 0.005= 149.995 inch

Know more about decimal tolerances  here:

https://brainly.com/question/32202718

#SPJ11

Answer:

D. 4x²-3x

Step-by-step explanation:

If the side is 2x-3 you multiply both numbers by themselves. 2x times 2x = 4x^2 and 3 times 3 is nine

Hope this helps :)

I am also in Algebra 1 as a darn 7th grader

The given polar equation is: r = 6/(5 − 4sin(θ))

Symmetry with respect to the polar axis:

A polar equation is symmetric with respect to the polar axis if replacing θ with −θ results in the same equation. Substituting −θ for θ, we get:

r = 6/(5 − 4sin(−θ)) = 6/(5 + 4sin(θ))

Since these equations are not identical, the given polar equation is not symmetric with respect to the polar axis.

Symmetry with respect to the pole:

A polar equation is symmetric with respect to the pole if replacing θ with θ + π results in the same equation. Substituting θ + π for θ, we get:

r = 6/(5 − 4sin(θ + π)) = 6/(−5 − 4sin(θ))

Multiplying the numerator and denominator by -1, we get:

r = -6/(5 + 4sin(θ))

Since this equation is not identical to the given equation, the given polar equation is not symmetric with respect to the pole.

Symmetry with respect to the line θ = π/2 or x = 2:

A polar equation is symmetric with respect to the line θ = π/2 (or x = a, where a is a constant) if replacing θ with π − θ results in the same equation. Substituting π − θ for θ, we get:

r = 6/(5 − 4sin(π − θ)) = 6/(5 + 4sin(θ))

Since these equations are identical, the given polar equation is symmetric with respect to the line θ = π/2 or x = 2.

Therefore, the given polar equation is symmetric with respect to the line θ = π/2 or x = 2, but it is not symmetric with respect to the polar axis or the pole.

To know more about polar equation , refer here :

https://brainly.com/question/1269731#

#SPJ11

Allie will have 2 oranges left over after dividing them evenly among the 11 baskets.

If Allie has 123 oranges and she wants to evenly divide them among 11 baskets, we can find the number of oranges left over by dividing the total number of oranges by the number of baskets and calculating the remainder.

To evenly distribute the oranges among the 11 baskets, we perform the division:

123 ÷ 11 = 11 with a remainder of 2

The quotient 11 represents the number of oranges that can be evenly distributed among the 11 baskets. The remainder 2 represents the number of oranges left over after the even distribution.

Therefore, Allie will have 2 oranges left over after dividing them evenly among the 11 baskets.

It's important to note that when dividing a certain number of objects among a specific number of groups, remainders may occur if the division is not exact. In this case, with 123 oranges and 11 baskets, 11 oranges can be evenly distributed, leaving 2 oranges as leftovers.

For more questions on dividing

https://brainly.com/question/30126004

#SPJ8

Linearization obtained using the Taylor series expansion agrees with the linearization given in equation (5.33) where u = 0.

To find the equilibrium points of the unforced system

dx/dt = 1 - x³,

we set the derivative equal to zero,

1 - x³ = 0

Solving this equation, we find the equilibrium points,

x³ = 1

Taking the cube root of both sides, we get,

x = 1

So, the equilibrium point for the unforced system is x = 1.

To compute the linearization of the system around the equilibrium point,

we can use a Taylor series expansion.

The linearization is given by,

dx/dt ≈[tex]f(x_{eq} )[/tex] + [tex]f'(x_{eq} )[/tex] ×  [tex](x-(x_{eq} ))[/tex]

where f(x) = 1 - x³ and [tex](x_{eq} )[/tex] is the equilibrium point.

Let us calculate the linearization,

[tex]f(x_{eq} )[/tex] = 1 - [tex](x_{eq} )[/tex]³

         = 1 - 1³

         = 1 - 1

         = 0

Now, calculate the derivative of f(x) with respect to x,

f'(x) = -3x²

Evaluate the derivative at the equilibrium point,

[tex]f'(x_{eq} )[/tex] = -3[tex](x_{eq} )[/tex]²

            = -3(1)²

            = -3

Now, substitute these values into the linearization equation,

dx/dt ≈ 0 - 3(x - 1)

⇒dx/dt ≈ -3x + 3

Comparing this linearization with equation (5.33),

dx/dt ≈ -3x + 3u

Therefore, the linearization obtained using the Taylor series expansion agrees with the linearization given in equation (5.33) where u = 0, which corresponds to the unforced system.

Learn more about Taylor series here

brainly.com/question/31767477

#SPJ4

The above question is incomplete, the complete question is:

Consider a scalar system dx/dt = 1 - x³ + u.  Compute the equilibrium points for the unforced system (u = 0) and use a Taylor series expansion around the equilibrium point to compute the linearization. Verify that this agrees with the linearization in equation.(5.33).

Given that a person is 200 yards away from a river and walks along a straight path to the river's edge at a 60° angle and we need to find out how far the person must walk to reach the river's edge.

The following image represents the situation described above:Let x be the distance required to reach the river's edge.

We can observe that the given situation can be represented as an isosceles triangle OAB with OA = OB = 200 yd and ∠OAB = 60°.

Therefore, ∠OBA = ∠OAB = 60° Using the angle sum property of the triangle,

we get ∠OBA + ∠OAB + ∠ABO = 180

°60° + 60° + ∠ABO = 180°

120° + ∠ABO = 180°

∠ABO = 180° - 120°

∠ABO = 60°

From triangle OAB, we can observe that OB = 200 yd OA = 200 yd .

We can apply the sine formula to find x as follows:  

sin A = Opposite/Hypotenuse

=> sin 60° = AB/OA

=> AB = sin 60° × OAAB

= √3/2 × 200AB

= 200√3

Therefore, the distance required to reach the river's edge is 200√3 yards long.The person must walk 200√3 yards to reach the river's edge.

To know more about river's edge visit:

https://brainly.com/question/31082873

#SPJ11

∂z/∂s = -sin()cos()t9 + cos()sin()9st2 and ∂z/∂t = sin()cos()s - cos()sin()81t.

To find ∂z/∂s and ∂z/∂t, we use the chain rule of partial differentiation. Let's begin by finding ∂z/∂s:

∂z/∂s = (∂z/∂)(∂/∂s)[(st9) cos(s9t)]

We know that ∂z/∂ is cos()cos() - sin()sin(), and

(∂/∂s)[(st9) cos(s9t)] = t9 cos(s9t) + (st9) (-sin(s9t))(9t)

Substituting these values, we get:

∂z/∂s = [cos()cos() - sin()sin()] [t9 cos(s9t) - 9st2 sin(s9t)]

Simplifying the expression, we get:

∂z/∂s = -sin()cos()t9 + cos()sin()9st2

Similarly, we can find ∂z/∂t as follows:

∂z/∂t = (∂z/∂)(∂/∂t)[(st9) cos(s9t)]

Using the same values as before, we get:

∂z/∂t = [cos()cos() - sin()sin()] [(s) (-sin(s9t)) + (st9) (-9cos(s9t))(9)]

Simplifying the expression, we get:

∂z/∂t = sin()cos()s - cos()sin()81t

Therefore, ∂z/∂s = -sin()cos()t9 + cos()sin()9st2 and ∂z/∂t = sin()cos()s - cos()sin()81t.

Learn more about chain rule here:

https://brainly.com/question/28972262

#SPJ11

The specific amount of paper Chase needs to cover this gift is √(480) square centimeters.

To find the surface area of a triangle, we can use Heron's formula, which states that the area of a triangle with side lengths a, b, and c can be calculated using the following formula:

Area = √(s * (s - a) * (s - b) * (s - c))

where s is the semi perimeter of the triangle, calculated as:

s = (a + b + c) / 2

In this case, the side lengths of the triangle are given as 7 cm, 13 cm, and 4 cm. Let's calculate the semi perimeter first:

s = (7 + 13 + 4) / 2

= 24 / 2

= 12 cm

Now, we can calculate the area using Heron's formula:

Area = √(12 * (12 - 7) * (12 - 13) * (12 - 4))

= √(12 * 5 * 1 * 8)

= √(480)

To know more about triangle here

https://brainly.com/question/8587906

#SPJ4

Therefore, the amount that can be withdrawn quarterly from the account for 20 years, assuming ordinary annuity is $7,366.99. Option (d) is correct.

An account paying 4.6% interest compounded quarterly has a balance of $506,732.32.

The amount that can be withdrawn quarterly from the account for 20 years, assuming ordinary annuity is $7,366.99 (option D). Explanation: An ordinary annuity refers to a series of fixed cash payments made at the end of each period.

A typical example of an ordinary annuity is a quarterly payment of rent, such as apartment rent or lease payment, a car payment, or a student loan payment. It is important to understand that the cash flows from an ordinary annuity are identical and equal at the end of each period. If we observe the given problem,

we can find the present value of the investment and then the amount that can be withdrawn quarterly from the account for 20 years, assuming an ordinary annuity.

The formula for calculating ordinary annuity payments is: A = R * ((1 - (1 + i)^(-n)) / i) where A is the periodic payment amount, R is the payment amount per period i is the interest rate per period n is the total number of periods For this question, i = 4.6% / 4 = 1.15% or 0.0115, n = 20 * 4 = 80 periods and A = unknown.

Substituting the values in the formula: A = R * ((1 - (1 + i)^(-n)) / i)where R = $506,732.32A = $506,732.32 * ((1 - (1 + 0.0115)^(-80)) / 0.0115)A = $506,732.32 * ((1 - (1.0115)^(-80)) / 0.0115)A = $7,366.99

Therefore, the amount that can be withdrawn quarterly from the account for 20 years, assuming ordinary annuity is $7,366.99. Option (d) is correct.

To know more about periods visit:

https://brainly.com/question/23532583

#SPJ11

Answer:

: .24 cars

Step-by-step explanation:

2/100×1200=24

To parametrize the surface of the first-octant portion of the cone between the planes z = 0 and z = 3, we can use cylindrical coordinates.

Let's denote the cylindrical coordinates as (r, θ, z), where r represents the distance from the z-axis, θ represents the azimuthal angle in the xy-plane, and z represents the height.

The equation of the cone in cylindrical coordinates can be written as:

z = √(r^2)/2

To restrict the cone to the first octant, we can set the ranges for the coordinates as follows:

0 ≤ r ≤ √(6)

0 ≤ θ ≤ π/2

0 ≤ z ≤ 3

Now, we can express the surface parametrically as:

x = r * cos(θ)

y = r * sin(θ)

z = √(r^2)/2

This parametrization satisfies the equation of the cone in the given range of coordinates. The parameter r varies from 0 to √(6), θ varies from 0 to π/2, and z varies from 0 to 3, covering the first-octant portion of the cone between the planes z = 0 and z = 3.

Therefore, the parametrization of the surface is:

(r * cos(θ), r * sin(θ), √(r^2)/2)

where 0 ≤ r ≤ √(6), 0 ≤ θ ≤ π/2, and 0 ≤ z ≤ 3.

Learn more about parametrize here: brainly.com/question/32388469

#SPJ11

If the individual switches to a hybrid car, they will save approximately 8,021.24 gallons of gas in a year for their commute.

To determine how much gas the individual will save if they switch to a hybrid vehicle, we need to calculate the total amount of gas consumed by both the current car and the hybrid car.

First, let's calculate the total number of miles driven by the individual in a year:

Total number of miles driven = 6060 miles/week x 52 weeks = 315,120 miles

Next, let's calculate the total amount of gas consumed by the current car in a year:

Gas consumption of current car = Total number of miles driven / Miles per gallon of current car

= 315,120 miles / 22 miles per gallon

= 14,323.64 gallons

Now, let's calculate the total amount of gas that will be consumed by the hybrid car in a year:

Gas consumption of hybrid car = Total number of miles driven / Miles per gallon of hybrid car

= 315,120 miles / 50 miles per gallon

= 6,302.4 gallons

Therefore, the individual will save:

Gas saved = Gas consumption of current car - Gas consumption of hybrid car

= 14,323.64 gallons - 6,302.4 gallons

= 8,021.24 gallons

Learn more about gallon at: brainly.com/question/31702678

#SPJ11

The members of the set (a ∪ b) ∩ c are 10, 12. The symbol for union is ∪. The intersection of two sets is a set that contains all the elements that are in both sets.

To find (a ∪ b) ∩ c, we first find the union of sets a and b:

a ∪ b = {8, 9, 10, 11, 12, 13}

Then we find the intersection of this set with set c:

(a ∪ b) ∩ c = {10, 12}

Therefore, the members of the set (a ∪ b) ∩ c are 10, 12.

In set theory, the union of two sets is a set that contains all the elements that are in either set. The symbol for union is ∪. The intersection of two sets is a set that contains all the elements that are in both sets. The symbol for intersection is ∩. To find the union of sets a and b, we simply list all the elements in either set, without repetition. To find the intersection of sets (a ∪ b) and c, we first find the union of sets a and b, and then find the elements that are common to both the union and set c.

Learn more about intersection here

https://brainly.com/question/30429663

#SPJ11

The lateral surface area of the roof is 46 ft².

Given dimensions of the roof of a dog house are:3.1 ft 3.14 ft 2.7 ft 11.00 ft 5 ft 3 ft
Now, to calculate the lateral surface area of the roof of the dog house, we need to find the dimensions of the sides of the roof.As per the given dimensions, we can see that there are two sides with dimensions:3.1 ft x 2.7 ft5 ft x 2.7 ft
Now, the lateral surface area of the roof of the dog house can be calculated by adding the area of these two sides. Lateral surface area of the roof = 2 × (3.1 ft × 2.7 ft) + 2 × (5 ft × 2.7 ft) = 46.62 ft²

Therefore, the lateral surface area of the roof is 46 ft².

To know more about lateral surface area, click here

https://brainly.com/question/15476307

#SPJ11