Acetylene gas (C2H2) used in welding, produces an extremely hot flame when it burns
in pure oxygen according to the reaction 2 C2H2(g)+5 O2(g) −→ 4 CO2(g)+2 H2O(g).
How much CO2 is produced when 30000 g of C2H2 burns completely?

Answers

Answer 1

When 30000 g of C2H2 burns completely, 29.34 g of CO2 will be produced.

What is burns?

Burns are a type of injury to the skin caused by heat, cold, electricity, radiation, friction, or chemicals.

The reaction of acetylene (C2H2) with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O) can be written as follows:
2 C2H2(g) + 5 O2(g) → 4 CO2(g) + 2 H2O(g)
To calculate the amount of CO2 produced when 30000 g of C2H2 burns completely, we can use the balanced chemical equation to determine the ratio of moles of CO2 produced per mole of C2H2. Since the equation shows that 4 moles of CO2 are produced for every 2 moles of C2H2, we can set up the following equation to solve for the mass of CO2 produced:
Mass of CO2 = (2 mol C2H2/30000 g C2H2) * (4 mol CO2 * 44.01 g CO2/1 mol CO2)
Solving for the mass of CO2, we get:
Mass of CO2 = 29.34 g CO2
Therefore, when 30000 g of C2H2 burns completely, 29.34 g of CO2 will be produced.

To learn more about burns
https://brainly.com/question/25148363
#SPJ1


Related Questions

25. Inferring A film badge consists of a piece of film
wrapped in a piece of dark plastic or paper. Doses
of what kinds of radiation can be measured with
this simple piece of equipment? Explain.

CAN ANYONE HELP ME PELASE???

Answers

Doses of gamma rays, X-rays of electromagnetic radiation and beta particles are measured with simple piece of equipment.

What is electromagnetic radiation?

The electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.

The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.

In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.

Learn more about electromagnetic radiation,here:

https://brainly.com/question/10759891

#SPJ1

Which flask has the highest
pressure, assuming they all contain
1 mole He at 298K?

Answers

D.
They all have the same amount of helium inside, so the flask with the smallest size has the most pressure.

Answer: d 1.0l

Explanation:

Return all unused chemicals to their original
containers.
1. T
2. F

Answers

Answer: F

Explanation:

are done.
__C2H2 +
__0₂
__CO₂ +
__H₂O

Answers

The balanced equation is, 2C₂H₆ + 7O₂ →  4CO₂ + 6H₂O.

How can the equation be balanced?

The reaction's balanced equation is as follows.

C₂H₂+O₂ → CO₂+H₂O

Water and carbon dioxide gas are created when dimethyl ether and oxygen combine.

Following is the reaction's balanced chemical equation:

2C₂H₆ + 7O₂ →  4CO₂ + 6H₂O.

Three moles of water and two moles of carbon dioxide gas are produced in this reaction when one mole of dimethyl ether combines with two moles of oxygen gas.

According to the law of conservation of mass, the mass of the reactants and products in a chemical reaction should be equal. As a result, each element's number of atoms stays constant throughout the chemical reaction. As a result, the chemical equation that represents the chemical process needs to be balanced. A chemical equation is considered to be balanced when the sum of the atom counts on the reactants and products sides equals one.

To learn more about balance equation refers to;

brainly.com/question/7223459

#SPJ1

Complete question -

Balance the given equation -

__C2H2 + __0₂ → __CO₂ + __H₂O

: Draw the Lewis structure for a carbon monosulfide (CS) molecule:

Answers

There are 4 valence electrons in an atom of C and 6 valence electrons in an atom of S. So, there is a total of 10 valence electrons in the CS molecule (6+4=10).

So, the carbon and sulfur form a triple bond in this compound so as to complete the octet of both C and S in the CS molecule. Also, there is an electron pair on both C and S.

Formal charge = valence electrons - (number of bond pairs + number of electrons present as lone pair)

The formal charge on C = 4 - (3 + 2) = 4 - 5 = -1

The formal charge on S = 6 - (3 + 2) = 6 - 5 = +1

The Lewis structure of the CS molecule is shown below:

To know more about CS Molecule:

brainly.com/question/30155499

#SPJ4

Exactly 14.5 moles of co2 are produced from burning how many moles of ch4 in excess oxygen?

Answers

Answer:

14.5 moles of CH4

Explanation:

There is 14.5 moles of carbon in the product CO2....there has to be 14.5 moles of carbon in the reactant CH4

   14.5 moles

Why is a crystal of strontium chloride (srcl2) described as an extended structure?.

Answers

Because it is structured in a repeating pattern, the crystal of strontium chloride (SrCl2) is referred to as having an extended structure.

A group of atoms or molecules that are present in a repeating pattern and are arranged in a specific ratio are said to produce extended structures in crystals. Crystals are composed of clustered together atoms of a single element or, in some cases, molecules.

We can infer that the strontium chloride (SrCl2) crystal is regarded as an extended structure because of its organization in a repeating pattern because of its repeating pattern and constant ratio of strontium chloride (SrCl2).

Learn more about strontium chloride here: https://brainly.com/question/29668810

#SPJ4

can anyone help with this question?

Answers

If the wight of copper metal is 130.42 then molar mass of cu 63.546 u.

what is 1 mole?

The International Unit System uses the mole (symbol: mol) as the measure of material quantity. How many basic entities of a specific drug are present in an object or sample is determined by the quantity of that material. It is specified that the mole comprises precisely 6.022140761023 elementary entities.

How can the molarity of Cu be determined?

The average atomic mass of the element copper, which appears on the periodic table as 63.55 AMU, can be used to calculate its molar mass. The SI symbol of mole is mol.

To know more about moles visit:

brainly.com/question/26416088

#SPJ1

calculate the frequency of radiation with a wavelength of 492 nm.​

Answers

The frequency of radiation with a wavelength of 492 nm is

6.09 x 10^14 Hz.

What is the meaning of frequency of radiation of wavelength?

Frequency of radiation of wavelength is a measure of how often a particular wavelength of radiation occurs. It is measured in Hertz (Hz) and is equal to the number of wave cycles per second. Wavelength is the distance from one wave crest to the next, so frequency is related to the speed of the wave. A higher frequency corresponds to a shorter wavelength, and a lower frequency corresponds to a longer wavelength.

λ= 480nm =480×10−9m       [∵1nm=10−9m]

c=3×108m/sec

Frequency, v=λ/c

       =[tex]\frac{3*10^{8}ms^{-1} }{480*10^{-9}m }[/tex]

      = [tex]6.09*10^{14}s^{-1}[/tex]

       =[tex]6.09*10^{14} Hz.[/tex]

Therefore, 6.09 x 10^14 Hz is the answer.

To learn more about  frequency of radiation with wavelength from the link

https://brainly.com/question/22096148

#SPJ1

Which of the following forms of
Bromine has the LARGEST ionic radius?
A. Br
B. Br-
C. Br+

Answers

Answer:

B. Br-

Explanation:

Ionic radius is a way of measuring the size of an element or compound.

Ionic Radius

Ionic radius is defined as the distance between the nucleus of an atom and the outermost electron. In terms of the periodic table, ionic radius grows to the left and down. The largest element on the periodic table is Francium since it is the lowest element on the left side.

Effective Nuclear Charge

The ionic radius of cations (positive ions) is always smaller than the regular element. Also, the ionic radius of anions (negative ions) is always larger. This is due to effective nuclear charge. Effective nuclear charge is how attracted electrons are to the nucleus. As electrons are added, effective nuclear charge decreases as the shielding effect becomes larger. Additionally, as the negative charge increases, the positive charge has less pull. The opposite is true for cations.

Since the electrons are less attracted to the nucleus in anions, they spread out more. This causes the radius to increase. For this reason, Br- has the largest ionic radius out of the listed options.

There are many fluctuations that may occur in the carbon cycle. Which of the following is NOT a natural cause of the fluctuations of the carbon cycle?
A. Industrial activities
B. Seasonal variations
C. Changes in ocean currents
D. The exchange that occurs between carbon sinks

Answers

Answer:

A

Explanation:

That one doesn't fall in the category of carbon cycle. It has nothing to do with natural causes since it is a man made thing. Industrial activities is not a natural cause.

Please help
C6H12O6 + 602 → 6CO2 + 6H₂O
Which set of reactants will be the
most efficient (least wasteful of
materials) for the reaction?

Answers

The most efficient set of materials would be 0.5 mol of [tex]C_6H_{12}O_6[/tex] and 3.0 mol of [tex]O_2[/tex]. Option D.

Mole ratio of reactants

From the balanced equation of the reaction illustrated in the image, the mole ratio of [tex]C_6H_{12}O_6[/tex] to [tex]O_2[/tex] is 1:6. In other words, for every 1 mole of [tex]C_6H_{12}O_6[/tex] that is consumed in the reaction, 6 moles of [tex]O_2[/tex] is required for a complete reaction.

In order for the reaction to remain efficient without any of the reactants remaining after the reaction, the mole ratio of the 2 reactants has to be maintained.

Thus:

1.5:3.0 does not equate to 1:61.0:30 does not equate to 1:63.0:6.0 does not equate to 1:60.5:3.0 equates to 1:6

In other words, only 0.5 mol of [tex]C_6H_{12}O_6[/tex] and 3.0 mol of [tex]O_2[/tex] will leave no leftovers after the reaction.

More on mole ratios can be found here: https://brainly.com/question/15288923

#SPJ1

For the balanced equation shown below,

2N₂O5 → 4NO2 + O₂

how many moles of NO2 will react with 0.8861 moles of N₂O5?​

Answers

Answer:

This answer makes an assumption noted in the Explanation.

1.772 moles of NO2

Explanation:

The balanced equation tells us that NO2 does not react with N2O5.  As written, the answer to the question is zero.

If the question is how many moles of NO2 are produced by 0.8861 moles of N2O5, then we can note that the equation promises us 4 moles NO2 per 2 moles N2O5.  That's a molar ratio of 4:2 (moles NO2/moles N2O5).

(0.8861 moles N2O5)*(4:2 (moles NO2/moles N2O5)) = 1.772 moles of NO2

What mass of MnO2 is produced when 445 grams of H₂O are reacted?
H₂O + 2MnO4 + Br→ BrO3 + 2MnO₂ + 2OH-
5,200 g
4,300 g
0.430 g
8,600 g

Answers

When 445 kilograms of water are reacted, 102.94 or 103 grams of MnO2 mass are formed.

What is mass?

A bodily lump is referred to in medicine. It could be brought on by an immunological response, a cyst, hormonal abnormalities, or aberrant cell growth. A mass could either be benign (not cancerous) or malignant (cancer).

Does mass imply matter?

Simply said, mass is a method of determining that however much material seems to be present in something like a body. Matter is anything with both weight and volume.

To know more about Mass visit:

brainly.com/question/26789700

#SPJ1

Answer: 4,300 g

Explanation:

https://brainly.com/question/30782030?referrer=searchResults

PLEASE CAN SOMEONE HELP ME PLEASE ! NO FAKE ANSWER PLEASE

Answers

Yes, it is the right response. Although the elements are imaginary, they resemble actual elements .Nomenclature is an organism name system used in biological classification.

What does nomenclature mean?

The Latin words nomen (name) and calare (to call) are the source of the word nomenclature. Both the Latin word nomenclatura and the English word nomenclator, which also denotes a source or broadcaster of names, relate to a list of names.

What exactly is nomenclature and how is it crucial?

Nomenclature is an organism name system used in biological classification. Genus & species names, two Latinized nouns drawn from numerous sources, serve as indicators of the species whereby the creature belongs.

To know more about nomenclature visit:

https://brainly.com/question/15324006

#SPJ1

CaCl2 is dissolved in water. Which of the following is NOT one of the 3 steps involved in this solvation process.
(a) Ca+2 ions surrounded by negative sides of water molecules and Cl−
ions are surrounded by positive sides of water molecules
(b) Solvent-solvent interactions overcome (hydrogen bonds between water molecules break)
(c) Solute-solute interactions overcome (Ca+2 and Cl− ions separate)
(d) CaCl2 molecules absorb the water becoming larger molecules.

Answers

Water is absorbed by CaCl2 molecules, resulting in bigger molecules. In order for the solute to dissolve in the solvent, the solute-solute interactions between the solute particles must be disrupted.

How would one explain calcium chloride chemically?

An inorganic material is calcium chloride, a salt with the chemical formula CaCl2. It is a white, crystalline substance that is highly water soluble at ambient temperature. It may be created by neutralizing calcium hydroxide with hydrochloric acid. By reducing the freezing point of water, calcium chloride is used to both prevent the production of ice and to remove it. This application makes the maximum use of calcium chloride.

To learn more about CaCl2 molecules refer to:

brainly.com/question/8881373

#SPJ4

Show how to distinguish between 1,3-cyclohexadiene and 1,4-cyclohexadiene by ultraviolet spectroscopy.

Answers

The compounds can be distinguished via UV spectroscopy by measuring their value.1,3-pentadiene is a type of conjugated compound while 1,4-pentadiene is not conjugated.

This causes the of 1,3-pentadiene to be higher than 1,4-pentadiene allowing us to distinguish between both. Using UV spectroscopy we measure the quantity or amount of light being absorbed by the sample and compare the obtained values. Thus, 1,3-pentadiene and 1,4-pentadiene can be distinguished by comparing their values obtained by UV spectroscopy.

To find more on  spectroscopy  refer here:

https://brainly.com/question/28523860

#SPJ4

This transition has a lower energy for conjugated systems like 1,3-cyclohexadiene. Since this transition has a greater energy for unconjugated systems like 1,4-cyclohexadiene, the wavelength is typically too short to be visible.

cyclohexadiene diols are excellent starting materials for the synthesis of complex natural compounds due to their inherent benefits. For the synthesis of polyhydroxylated targets such inositols, cyclitols, and carbohydrates, the diol moiety is the ideal place to start. The chemical compound cyclohexa-1,3-diene has the formula (C2H4)(CH)4. It is a flammable, colourless liquid. It has a 20 °C, D, refractive index of 1.475. Terpinene, a substance found in pine oil, is a 1,3-cyclohexadiene derivative that occurs naturally. Cyclohexane, which has the chemical formula C6H12 and is planar and cyclic, lacks delocalized pi electrons (since there are no pi bonds), and it also does not abide by Huckel's rule. As a result, it lacks fragrance.

learn more about cyclohexadiene  here:

https://brainly.com/question/29987619

#SPJ4

Cae-2 - Reeta wa feeling thirty but there wa only a pot of water at home which wa muddy and unfit for drinking. How do you think Reeta would have made thi water fit for drinking if the following material were available to her? Alum, tub, mulin cloth, ga tove, thread, pan and lid. Brainly

Answers

Reeta could have made the water which is fit for drinking purposes using the materials available to her.

With the available materials, Reeta would have taken the following steps to purify water.  

Firstly, she can filtered the muddy water with the help of a muslin cloth, which is mainly used for the purification purposes. Now, she has to tie a piece of Alum with the help of a thread and submerge it in water and then leave the water which is undisturbed for some time. After resting, the impurities will finally settle down at the bottom and the water from the top can be drained off. Now she has to boil the discarded water for 10 minutes by covering it with the pan and making it cool down followed by filtering the water. And finally, the water will be purified with filtration that will make it fit for drinking purpose.

To know more about impurities here

https://brainly.com/question/14737604

#SPJ4

A cube of each of metal i placed in a cup of water, they both diplace the ame volume of water ,aying how i thi poible?

Answers

This is possible because the volume of water displaced by an object is determined by the volume of the object, not its weight or mass.

The cube of metal I and the cube of another metal both have the same volume, so they would displace the same volume of water. The principle of buoyancy states that the buoyant force on an object is equal to the weight of the fluid that is displaced by the object can be applied in here. Therefore, if two objects have the same volume, they will displace the same amount of fluid and experience the same buoyant force.

Learn more about the principle of buoyancy here: https://brainly.com/question/4421565

#SPJ4

As nac2h3o2(s) is stirred into water and dissolves, the electrical conductivity of the solution.

Answers

As nac2h3o2(s) is stirred into water and dissolves, the electrical conductivity of the solution remains the same.

What is Electrical conductivity of the solution ?

The ability of an aqueous solution to convey an electrical current is gauged by its conductivity. Since ions are responsible for carrying the current, the conductivity rises as ion concentration, mobility, and water temperature rise in a solution. Ionic strength is connected to conductivity measurements. But this isn't a qualitative experiment (that is, it is not known which ions are present). The electrical calculation for resistance, which is stated in, is the opposite of conductivity

Applications Of Elecctrical conductivity sensors to determine the water quality:The process of mineralization, also known as total dissolved solids. Information on the total dissolved solids is used to calculate the overall ionic effect in a water supply. The amount of ions that are present in water can frequently alter certain physiological effects on plants and animals. Quickly noting variations or changes in naturally occurring water and wastewater.Calculating the required sample size for additional chemical analysis.Calculating the dosages of chemicals or other treatment agents to be administered to the water sample.

To know more about Eletrical conductivity of Solutions,Refer to:

https://brainly.com/question/1446556

#SPJ4

Give the common name for(CH3)2CHCH2Cl
a. Sec-butyl chloride
b. Ter-butyl chloride
c. N-butyl chloride
d. Iso-butyl chloride
e. Neo-butyl chloride

Answers

The correct answer is option d. The common name for (CH3)2CHCH2Cl is Iso-butyl chloride.

Iso-butyl chloride is a chlorinated derivative of isobutane. It is organochlorine compounds.  Isobutyl chloride is made up of compounds of chlorine, carbon, and hydrogen.

Other important details about Iso-butyl chloride is as following-

Formula: C4H9Cl

Boiling point: 69 °C

Molar mass: 92.57 g/mol

Density: 877 mg mL−1

Melting point: −131 °C (−204 °F; 142 K)

Heat capacity (C): 158.6 J K−1 mol−1

Refractive index (nD): 1.398

To know more about Compounds refer to-

brainly.com/question/26487468#

#SPJ4

Select the single best answer.
Predict the shape of XeF3+.
a. tetrahedral
b. seesaw
c. T-shaped
d. trigonal pyramidal
e. trigonal planar
f. trigonal bipyramidal

Answers

Answer:

C. T shaped

Explanation:

had this last year

The shape of XeF3+ is T-shaped. Therefore, option C is correct.

What is molecular geometry ?

The three-dimensional configuration of the atoms that make up a molecule is known as molecular geometry. It provides data on the molecule's overall shape as well as bond lengths, bond angles, torsional angles, and any other geometrical aspects that affect each atom's location.

The structure that results has a Y-shaped geometry and an electrical structure of b22 a10. The T-shaped and Y-shaped structures of XeF3- are therefore a Jahn-Teller pair of states deriving from the identical D3h ion, as can be shown by this molecular orbital image.

The geometry of XeF3+ is T-shaped because the centre atom, Xe, is surrounded by 3 bond pairs and 2 lone pairs.

Thus, option C is correct.

To learn more about the molecular geometry, follow the link;

https://brainly.com/question/7558603

#SPJ5

do you think it matters if you report this quantity as 150 grand or 150.0 grams ? do they mean the same thing why or why not?

Answers

Answer:

Yes

Explanation:

Yes, I do think they mean the same thing. Explanation: 150 grams and 150 grams are the same thing and adding 0 to the end of a decimal

Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Therefore, 150grams and 150.0 grams are the same measurement.

What is matter?

Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.

Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.

Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter. 150 grams and 150.0 grams are the same measurement as both have same measurement.

Therefore, 50 grams and 150.0 grams are the same measurement.

To learn more about matter, here:

https://brainly.com/question/4562319

#SPJ2

Which material has most effect as thermal mass?

Answers

Materials such as concrete, bricks and tiles absorbs and store more heat as compared to materials such as timber and cloth which have low thermal masses.

Thermal mass in floors is most effective. In most of the climate conditions a concrete slab which is insulated underneath and around the edge and where it is in direct contact with the ground absorbs more energy and thus it is the most effective way to increase thermal mass.

Thermal mass refer to the property of construction materials to absorb, store, and release heat energy.

Water also have high thermal mass.

To know more about thermal mass refer to-

brainly.com/question/19666326#

#SPJ4

To determine the concentration of an unknown solution, the technique that can be used is titration, where the solution of a known concentration is used. The titrant is added to the burette with a known volume of unknown solution till the reaction is finished.

Answers

To determine the concentration of an unknown solution, the technique that can be used is called titration.

Titration is a qualitative analysis technique which is used to calculate the unknown concentration of a given analyte in a solution.

In this process, a standard solution of known concentration and volume is taken(titrant). This solution is then allowed to react with the analyte until the endpoint attained.

In the first step of this procedure, a small amount of the analyte is added to a conical flask or a beaker, followed by the addition of a small amount of indicator. This is then placed under the burette containing the standard solution or titrant.

Small volumes of titrant are added to the analyte dropwise until a permanent colour change is observed on reaching the end point.

To know more about titration here

https://brainly.in/question/54340574

#SPJ4

Please answer the questions in the picture below

Answers

Answer b

Explanation:

As an animal grows, its mass increases. The matter that makes up this new mass comes mostly from

Answers

As an animal grows, its mass increases. The matter that makes up this new mass comes mostly from the food  that the animal consumes.

What is matter?

Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it has volume .Matter is composed up of atoms which may or not be of same type.

Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states such as solids, liquids and gases depending on the conditions of temperature and pressure.

The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.

Learn more about matter,here:

https://brainly.com/question/9477180

#SPJ1

What is the molarity when 24 grams of lioh is added to 200 ml of water?

Answers

The molarity when 24 grams of LiOH is added to 200 ml of water is 4.2M.

What is molarity, for instance?

The moles of solute per liter of solution is measured as molarity. For instance, when table salt is dissolved in water, water serves as both the solution and the solute. Sodium chloride weights 58.44 grammes per mole. One molar solution, or 1M, is created by dissolving 58.44 grammes of sodium chloride in one liter of water.

What does Molality refer to?

The term "total moles of a solute contained in a kilogram of a solvent" is used to describe molality. Molal concentration is another name for molality. It is a measurement of a solution's solute concentration.

Determination of molarity:

The molarity of the given LiOH solution is found to be 1.99 mol/L or 1.99M.

Given weight = 20g

molar mass of lithium hydroxide = 7+16+1=24g

volume = 200ml = 0.2l

Number of mole (n) = given weight /molar mass of lithium hydroxide

n = 20/24 =0.84

Molality = Number of mole (n) /volume of solvent

molality = 0.84/0.2

= 4.2M

To learn more about molarity of a solution refers to:

brainly.com/question/30188427

#SPJ4

How do you draw
3-ethyl-5-isobutylnonane

Answers

Answer:

Explanation:

Structure of 3-ethyl-5-isobutylnonane

It is given in the following attachment:

to know more about ethyl

https://brainly.in/question/1717348

The organic compound 3-ethyl- 5-isobutylnonane contains 9 carbon atoms in the long chain and one ethyl branch at the third carbon atom and one isobutyl group in the 5th carbon atom as in the image.

What are hydrocarbons ?

Hydrocarbons are organic compounds with carbon -hydrogen bonds. The organic compounds are named based on the rules of IUPAC. The compound gets its basic name from the number of carbon atoms in the longest chain.

If the number of carbons atoms is one, the chain is given its suffix meth, eth for two prop for three and so on. The chain with 9 carbon atoms are named with nonane in the end.

Here, the given compound contains an ethyl group as a branch in third carbon in the chain and an isobutyl group in the 5th position as shown in the image given below:

Find more on hydrocarbons:

https://brainly.com/question/17578846

#SPJ2

7. Is each structural formula correct according to the HONC 1234 rule? For any molecules
that don't follow the HONC 1234 rule, repair the incorrect structural formula (Note: There
may be more than one way to correct a formula)

a. H
|
H-C-H
H-C-H
H-C-H
|
O
|
H

b.
H
|
H-O-H
H-C-H
H-C-H
|
H

c.
H H
| |
H-C-C-H
| |
O H
|
H

d.
H H
| |
H-C-C-N-H
| |
O H
|
H

Answers

Answer: divide the falling number and then get it

Explanation: find the answer

Other Questions
I really dont get it!! how did the periodic table get its name?a. the periodic table got its name from the way the elements are arranged in periods called groups.b. the periodic table got its name from the way the elements are arranged in rows which are called periods.c. the periodic table got its name from the way the elements are arranged in rows which are called periodic groups.d. the periodic table got its name from the way the elements are arranged in rows which are called groups. Find the coordinates of the point P that divides the directed line segment from A to B in the given ratio. A(9, 1), B(11, 9); 3 to 2 what is pls helpppp......... As mentioned in the text, the tangent line to a smooth curve r(t) = (t)i + g(t)j + h(t)k at t = t0 is the line that passes through the point ((t0), g(t0), h(t0)) parallel to v(t0), the curves velocity vector at t0. In Exercises 2326, find parametric equations for the line that is tangent to the given curve at the given parameter value t = t0. help me please please Which of these is NOTa concern for consumers in times of inflation? a.They cannot anticipate the cost of goods and services. b.They lose money on their investments and savings. c.They are at a disadvantage when paying back borrowed money. d.They struggle when they are on a fixed income. Find the whole. 215% of what number is 172 The name of the pressure zone at 90 degree North and South is called the _____ What is 20% of 160? A. 8 B. 32 C. 80 D. 320 The radius of a cylindrical water tank is 4.5ft, and its height is 11ft. What is the volume of the tank? Use the value 3.14 for , and round your answer to the nearest whole number.Be sure to include the correct unit in your answer. Paki answer po fi d the value of k mentally How would you describe"analogous color harmony" to a six year old? The following data show the scores Gina obtained on 12 IQ tests:93, 83, 74, 74, 83, 92, 93, 94, 90, 87, 83, 86The box plot below represents these data:74767880828486889092949698Which of the following is shown incorrectly in the box plot? (5 points)MedianObLower quartileUpper quartileOdMaximum value pls answer fast. will give brainliest (v2) The analysis of people getting along is known as____ If your friend were doing something dangerous or harmful to themselves would you lie for them? In your opinion would this would be a situation where it would be okay to lie? What would you do? Which proportion would you use to solve the following problem?A map has a scale of 1 cm : 5 km. Determine how far apart two cities are if they are 4 cm apart on the map.ILL MARK BRAINLEST a quien tengo que hacer preguntas tan necesarias para conseguir lo que quiero y para actuar de modo ms prctico posible? Use elimination to solve the system of equations.x y = 5x + y = 3a(4, 1) b(4, 1) c(4, 1) d(4, 1)