It is possible for an electron to be free or linked to an atom. An electron is a negatively charged subatomic particle (not bound).
What is in a electron?Unattached or attached to an atom, an electron is a negatively charged subatomic particle (not bound). One of the three main types of particles inside an atom, along with protons and neutrons, is an electron that is linked to the atom.
The tiniest and least massive component of an atom is an electron, which has a negative charge. In a neutral atom, the number of protons and electrons is equal. For instance, the hydrogen atom only contains one proton and one electron. While the uranium atom has 92 protons and, thus, 92 electrons.
The exterior of the nucleus is surrounded by negatively charged electrons in orbit.
Therefore, the correct answer is option d) 2p.
To learn more about electron refer to:
https://brainly.com/question/860094
#SPJ4
Estimate how much heat in joules is released when 25.0 g of water (C = 4.184 J/g°C) is cooled from 80.0°C to 30.0°C?
Answer:
5230 J
Explanation:
m = 25 g = 0,025 kg
c = 4,184 J /(g * °C) = 4184 J /(kg * °C)
[tex]t_{1}[/tex] = 80 °C
[tex]t_{2}[/tex] = 30 °C
The formula is Q = c *m * ([tex]t_{2} - t_{1}[/tex])
Calculating:
Q = 4184 * 0,025 * (30 - 80) = 5230 J
Note that we get a negative heat (-5230 J). It just means that it is released.
The amount of heat will be 5230 j.
What is heat?
Heat is a type of energy that is transferred between both the system and its surroundings as a result of temperature variations.
Calculation of heat.
Given data:
Mass = 25.0 g = 0.025 kg
C = 4.184 J/g°C
[tex]T_{1}[/tex] = 80.0°C
[tex]T_{2}[/tex] = 30.0°C
Q= ?
By using the formula of heat.
Q = MC ([tex]T_{2} - T_{1}[/tex])
Put the value of given data in heat equation.
Q(heat) = 0.025 × 4.184 ( 30 - 80)
Q(heat) = 5230 J.
Therefore, the amount of heat will be 5230 J.
To know more about heat.
https://brainly.com/question/13860901.
#SPJ2
Please help I’m so confused on this it’s stoichiometry
Answer:
48.27g Na
Explanation:
To start we need to balance the equation. The trick is to make sure both sides have equal amounts of each atom:
2Na + Cl2 --> 2NaCl
Now we can use sociometry
We have 75 g of Cl2, and for every 1 mole of Cl2, there are 70.9 grams:
[tex]75g Cl2 * \frac{1mole Cl2}{70.9g Cl2}= 1.05 mole Cl2[/tex]
Now we have moles of Cl2. To get to grams of Na, we need to first use mole to mole ratio:
[tex]1.05mole Cl2 *\frac{2 mole Na}{1 mole Cl2} =2.1 mole Na[/tex]
From here we convert moles of Na into grams of Na
[tex]2.1mol Na*\frac{22.99g Na}{1 mole Na} = 48.27g Na[/tex]
It's usually easier to just make one singular equation with all of these smaller equations.
[tex]75gNa*\frac{1molCl2}{70.9gCl2} *\frac{2mol Na}{1 mol Cl2} *\frac{22.99g Na}{1 mol Na}=48.27 gNa[/tex]
The trick to sociometry is making sure your units cancel out until you only have the unit you want. If there are moles of Na in the numerator, there needs to be moles of Na in the denominator. If there are grams of Cl2 in the numerator, there needs to be grams of Cl2 in the denominator and so one and so on
A: A 21.3−g sample of dinitrogen monoxide is confined in a 5.76−L vessel. What is the pressure (in atm) at 111°C?
B: Find the density of Freon−11 (CFCl3) at 157°C and 4.65 atm.
g/L = ?
Answer:
A. 2.65 atm.
B. 18.11 g/L.
Explanation:
A. Determination of the pressure
Mass of N₂O = 21.3 g
Volume = 5.76 L
Temperature (T) = 111 °C
Pressure (P) =.?
First, we shall determine the number of mole in 21.3 g of dinitrogen monoxide, N₂O. This can be obtained as follow:
Mass of N₂O = 21.3 g
Molar mass of N₂O = (14×2) + 16
= 28 + 16
= 44 g/mol
Mole of N₂O =?
Mole = mass /Molar mass
Mole of N₂O = 21.3/44
Mole of N₂O = 0.484 mole
Next, we shall convert 111°C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Temperature (T) = 111 °C
Temperature (T) = 111 °C + 273
Temperature (T) = 384 K
Finally, we shall determine the pressure. This can be obtained as follow:
Number mole of N₂O = 0.484 mole
Volume = 5.76 L
Temperature (T) = 384 K
Gas constant (R) = 0.0821 atm.L/Kmol
Pressure (P) =.?
PV = nRT
P × 5.76 = 0.484 × 0.0821 × 384
Divide both side by 5.76
P = (0.484 × 0.0821 × 384) / 5.76
P = 2.65 atm
B. Determination of the density of CFCl₃
Temperature (T) = 157°C
Pressure (P) = 4.65 atm.
Density of CFCl₃ =?
First, we shall determine the molar mass of CFCl₃. This can be obtained as follow:
Molar mass of CFCl₃ = 12 + 19 + (35.5×3)
= 12 + 19 + 106.5
= 137.5 g/mol
Next, we shall convert 157°C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Temperature (T) = 157 °C
Temperature (T) = 157 °C + 273
Temperature (T) = 430 K
Finally, we shall determine the density of CFCl₃. This can be obtained as follow:
Temperature (T) = 430 K
Pressure (P) = 4.65 atm.
Molar mass of CFCl₃ (M) = 137.5 g/mol
Gas constant (R) = 0.0821 atm.L/Kmol
Density (D) of CFCl₃ =?
D = PM / RT
D = (4.65 × 137.5) / (0.0821 × 430)
D = 18.11 g/L
A) Calculate the vapor pressure of a 7% by mass benzaoic acid in ethanol solution at 30°C. The vapor pressure of pure ethanol at this temperature is 13.40 kPa. ( assume a 100 g of solution)
B) Calculate the boiling point of the solution above
Answer:
the answer is C
Explanation:
Lesson Question: What is the effect of
pressure on the volume of a gas?
To answer this question, you used weight to
change the pressure of the gas and
measured the
resulting changes to the gas's volume.
COMPLETE
The amount of gas (in terms of moles, mass, and
molecules):
Answer:
pressure
volume
was constant
Boyle's
Explanation:
Answer:
the first one is pressure &volume the second one is was constant the third one is Boyle's
Explanation:
A balloon is filled with 30L of helium gas at 1atm.What is the volume when balloon rises to an attitude where the pressure is only 0.25 atm?
Answer:
[tex]V_2=120L[/tex]
Explanation:
Hello!
In this case, since Helium is undergoing a volume-pressure change, according the Boyle's law, we infer the following equation is used:
[tex]P_1V_1=P_2V_2[/tex]
Thus, since we are not given the volume at 0.25 atm, we can solve for V2 to do so:
[tex]V_2=\frac{P_1V_1}{P_2}[/tex]
Thus, we plug in to obtain:
[tex]V_2=\frac{1atm*30L}{0.25atm}=120L[/tex]
Best regards!
The final volume of the balloon at the given altitude is 120 L.
The given parameters;
initial volume of the balloon, V₁ = 30 Linitial pressure, P₁ = 1 atmfinal pressure of the balloon, P₂ = 0.25 atmThe final volume of the balloon at the given altitude is calculated by applying Boyles law as follows;
[tex]P_1 V_1 = P_2 V_2\\\\V_2 = \frac{P_1V_1}{P_2} \\\\V_2 = \frac{30 \times 1 }{0.25} \\\\V_2 = 120 \ L[/tex]
Thus, the final volume of the balloon at the given altitude is 120 L.
Learn more here:https://brainly.com/question/1696010
What do scientists use to answer scientific questions?
A. A scientific guidebook
B. The scientific method
C. A scientific law
D. The atomic theory
Scientists uses scientific methods and well designed experiments to solve a scientific question. They can use some laws and previous scientific records as an aid.
What is a scientific question ?A scientific question arises from selected topic under study. A scientific question addresses a natural phenomenon, a socially relevant problem or a any personal curiosity.
The scientific question must be testable. The first prediction for the question based on observation and scientific records is called the hypothesis.
The hypothesis must be tested using a well designed scientific experiment based on a scientific method. The methodology should be clearly specify what to collect and how to use them. Hence, option B is correct.
Find more on scientific methods:
https://brainly.com/question/16172865
#SPJ1
7. A family used 1,438 kilowatt-hours (kwh) of electricity during the month of
October. Express this amount of energy in joules and Btu. See Appendix A.
Can you please show the steps thanks
Answer:
Im bad at math sorry
Explanation:
i don’t understand this please help!!!
Answer:
Numbers after atoms are subscripts. Numbers before atoms are coefficients.
Equation: 2Na +Cl2 -> 2NaCl
Given: 6.8 grams of Na
Unknown: moles of NaCl
Set up: [tex]6.8g Na *\frac{1 mole Na}{22.99 g Na}*\frac{2 moles NaCl}{2 moles Na} =.2957 moles NaCl[/tex]
Explanation:
We know that the reactants are Na and Cl and that what is being produced, the products, is NaCl.
Na + Cl -> NaCl
CAREFUL! Cl is a diatomic ion, is it gets a subscript of 2! This means there need to be 2 cl atoms on the right side as well. But now there are 2 Na on the right side. So we multiply Na by 2 on the left so that both sides have two Na atoms.
2Na +Cl2 -> 2NaCl
B)
We know that there are 6.8 grams of Na. This is our given.
What do we want to find out? We want to find how many moles of NaCl there are, so that is our unknown.
C) A mole ratio is exactly what it sounds like. From our balanced equation, we can see that there are 2 moles of Na and 2 moles of NaCl. In other words, there are 2 moles of Na for every 2 moles Nacl. In notation, this is [tex]\frac{2 mole Na}{2 Mole NaCl}[/tex] or 2:2. You can simplify to 1:1 ratio, but as equations get more complex I find it easier to not. It depends on what your teacher wants and what you find easier.
D)
By set up I assume they mean stoichiometry (chemistry conversion) . First I'm going to split up the set up so that it is easier to understand.
We start with the given and convert that into moles Na. We can do this by remembering that there are 22.99 grams for every 1 mole Na:
6.8 g Na* [tex]\frac{1 mole Na}{22.99g Na} = .2957 moles Na[/tex]
Now we can use that mole ration we found in part C to convert moles of Na into moles of NaCl:
[tex].2957 moles Na *\frac{2 moles NaCl}{2 moles Na}= .2957[/tex]
Usually, we will put these together to get
[tex]6.8g Na *\frac{1 mole Na}{22.99 g Na}*\frac{2 moles NaCl}{2 moles Na} =.2957 moles NaCl[/tex]
Tip: in Stoichiometry, it is important to remember that your units should cancel out until you only have the units you want. If there are moles of Na in the numerator, there should be moles of Na in the denominator of the following fraction. If there are grams Na in the numerator, there should be grams Na in the denominator and so and so on until you are only left with the unit you want, which, in this case, is moles of NaCl.
Which is the correct Lewis structure for acetylene (C2H2)?
Answer:
The answer is H-C≡C-H
Explanation:
A 50.8g sample of glass, which has a specific heat capacity of 0.670·J·g?1°C?1, is put into a calorimeter (see sketch at right) that contains 150.0g of water. The temperature of the water starts off at 22.0°C. When the temperature of the water stops changing it's 25.6°C. The pressure remains constant at 1atm. Calculate the initial temperature of the glass sample. Be sure your answer is rounded to the correct number of significant digits.
Answer:
Explanation:
mass of glass m = 50.8 g
specific heat s = .67 J /g °C
initial temperature = t
Loss of heat by glass
= m s Δ t
= 50.8 x .67 x ( t - 25.6 )
= 34.036 x ( t - 25.6 )
Gain of heat by water
= 150 x 4.2 x ( 25.6 - 22.0 )
= 2268
Heat gain = heat lost
2268 = 34.036 x ( t - 25.6 )
2268 = 34.036 t - 871.32
34.036 t = 3139.32
t = 92.23°C .
Explain why anhydrous aluminium chloride is fairly soluble in organic solvent while anhydrous magnesium chloride is insoluble
Aluminium chloride is covalent hence soluble in organic solvent while magnesium chloride being ionic is insoluble in organic solvent
Learn more about Aluminium chloride brainly.com/question/17131529
#SPJ2
Why are invasive species such a huge threat to ecosystems?
Invasive species are impossible to control once they are introduced and spread rapidly
Invasive species can replace native species, forcing their migration out of the area
Invasive species provide no added benefit or diversity to the ecosystem
Invasive species can do intense damage so much so that ecosystems may not be able to recover
Answer: Its D the guy above is wrong dont use his answer he got me a 75
Explanation:
Can metals take away electrons from non metals?
Answer:
Well no because if metals lose electrons, any non-metal sources/items gain electrons from the metal.
Answer:
Metals tend to lose electrons and non-metals tend to gain electrons, so in reactions involving these two groups, there is electron transfer from the metal to the non-metal
Explanation:
Glucose is the monomer in the natural polymers ____________________ and cellulose.
Answer:
Starch
I hope this helps
The pressure 15.0 m under water is 248 kPa.
What is this pressure in torr
Answer:
1860 torr
Explanation:
In order to convert from kPa to torr, we are going to use the following conversion factor:
1 kPa = 7.5 torrNow we multiply 248 kPa with this factor so that the kPa units cancel each other and only the torr units remain:
248 kPa * [tex]\frac{7.5torr}{1kPa}[/tex] = 1860 torrThis means that the answer is 1860 torr.
Am I right????????????????Btw question was “Name four abiotic factors shown in the above prairie ecosystem?
Convert 392 K into Celsius.
Your answer should have three significant figures (round your answer to the nearest whole number).
Use −273∘C for absolute zero.
Answer:
118.85 degrees celsius (not sure if it is)
Answer:
118 is correct
Explanation:
:)
Household hydrogen peroxide is an aqueous solution of hydrogen peroxide (H2O2), and its concentration is often measured as a percent by weight. Most drug stores sell 3% solution, which means there are 3.0 g of H2O2 per every 100 g total of solution (H2O2 H2O). For the kinetics experiment, 15 mL of 3% (w/w) hydrogen peroxide solution was poured into a measuring cup with 120 mL of water. 5 mL of 1M sodium carbonate solution (Na2CO3) was also added to the mixture. What is the molar concentration (molarity) of hydrogen peroxide (in mol/L) of the final solution
Answer:
0.093 M
Explanation:
First, we assume that the density of household hydrogen peroxide is 1 g/mL. We also assume that there's no reaction between hydrogen peroxide and sodium carbonate, if there were, in the end all hydrogen peroxide would be consumed.
Now we calculate how many grams of H₂O₂ were added, using the given volume, concentration and density:
15 mL * [tex]\frac{1gSolution}{1mL}*\frac{3gH_2O_2}{100gSolution}[/tex] = 0.45 g H₂O₂We convert grams to moles:
0.45 g H₂O₂ ÷ 34 g/mol = 0.013 mol H₂O₂
Now we divide the number of moles by the final volume, to calculate the molarity of H₂O₂:
Final Volume = 15 mL + 120 mL + 5 mL = 140 mL140 mL / 1000 = 0.140 LMolarity = 0.013 mol H₂O₂ / 0.140 L = 0.093 MBased on the given concentration of the original hydrogen peroxide solution, the molarity of the hydrogen peroxide (in mol/L) of the final solution is 0.093 M.
What is the concentration of the hydrogen peroxide solution?Assuming that the density of household hydrogen peroxide is 1 g/mL and that no reaction occurs between hydrogen peroxide and sodium carbonate.
The mass in grams of H₂O₂ added is first determined using the given volume, concentration and density:
mass = volume * density * concentrationmass = 15 mL * 1 g/mL * 3g/100g = 0.45 g H₂O₂
Moles of H₂O₂ is determined as follows:
moles = mass /molar massmolar mass of H₂O₂ = 34 g/mol
moles of H₂O₂ = 0.45 g H₂O₂ / 34 g/mol
moles of H₂O₂ = 0.013 mol H₂O₂
molarity of H₂O₂ is then calculated as follows:
molarity = moles/volume in Lfinal volume = 15 mL + 120 mL + 5 mL = 140 mL
final volume = 140 mL / 1000 = 0.140 L
molarity = 0.013 mol H₂O₂ / 0.140 L
molarity of H₂O₂ = 0.093 M
Therefore, the molarity of the hydrogen peroxide (in mol/L) of the final solution is 0.093 M.
Learn more about molarity at: https://brainly.com/question/17138838
How many grams of sodium (Na) are in 6.2 mol of Na?
mass = mol no. x molar mass
= 6.2 x 23
= 142.6 g
kylie jenner wants to test if red or pink lipstick makes her lips look bigger. what is the independent variable here?
Answer:
her ugly duck lips
Explanation:
Answer:
her lips.
Explanation:
the dependent variable is the lip stick because it changes but her lips do not actually change at all, ......i think. ;)
formula for calculating pressure
Answer:
The formula for pressure is P = F/A, in which P is pressure, F is force, and A is area.
Explanation:
Which statement best explains how the solution should be made?
A) Add 1.5 mL of 0.50 M H2SO4 to 10.5 mL of water to get 12 mL of 4 M H2SO4.
B) Add 1.5 mL of 4.00 M H2SO4 to 10.5 mL of water to get 12 mL of 0.50 M H2SO4.
C) Add 1.5 mL of 4.00 M H2SO4 to 12 mL of water to get 0.50 M H2SO4.
Answer:
B
Explanation:
Correct on Edge
According to the following reaction, how many grams of carbon tetrachloride will be formed upon the complete reaction of 27.7 grams of chlorine gas with excess carbon disulfide? carbon disulfide (s) + chlorine (g) carbon tetrachloride (l) + sulfur dichloride (s) grams carbon tetrachloride
Answer: 15.0 g of [tex]CCl_4[/tex] will be formed upon the complete reaction of 27.7 grams of chlorine gas with excess carbon disulfide
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} Cl_2=\frac{27.7g}{71g/mol}=0.390moles[/tex]
The balanced chemical reaction is:
[tex]CS_2(g)+4Cl_2(g)\rightarrow CCl_4(l)+2SCl_2(s)[/tex]
[tex]Cl_2[/tex] is the limiting reagent as it limits the formation of product and [tex]CS_2[/tex] is the excess reagent.
According to stoichiometry :
4 moles of [tex]Cl_2[/tex] give= 1 mole of [tex]CCl_4[/tex]
Thus 0.390 moles of will give = [tex]\frac{1}{4}\times 0.390=0.0975moles[/tex] of [tex]CCl_4[/tex]
Mass of [tex]CCl_4=moles\times {\text {Molar mass}}=0.0975\times 154=15.0g[/tex]
Thus 15.0 g of [tex]CCl_4[/tex] will be formed upon the complete reaction of 27.7 grams of chlorine gas with excess carbon disulfide
When Earth’s Plates shift the result is a(n)______.
Answer:
An earthquake could occur.
Answer:
The correct answer is (lava)
Explanation:
Youre welcome
When the plates move they collide or spread apart allowing the very hot molten material called lava to escape from the mantle. When collisions occur they produce mountains, deep underwater valleys called trenches, and volcanoes.
What mass of KNO, will dissolve in 100 g of water at 100°C?
Answer:
About 170-180 grams of potassium nitrate are completely dissolved in 100 g.
Explanation:
Hello!
In this case, according to the reported solubility data for potassium nitrate at different temperatures on the attached picture, it is possible to bear out that about 170-180 grams of potassium nitrate are completely dissolved in 100 g; considering that the solubility is the maximum amount of a solute that can be dissolved in a solvent, in this case water.
Best regards!
Choose the statement that best describes the effect of temperature on atoms and molecules.
A temperature decrease results in particles having more collisions with other particles
Solids have more kinetic energy than gases.
Decreasing temperature can cause a liquid to become a gas
increases in temperature cause partides to speed up and have more collisions.
Answer:
option D is correct answer of this question
Answer:
Explanation:
As the temperature of a liquid rises, the average speed of its molecules rises as well. The molecules in a liquid move faster as the temperature rises, increasing the liquid's kinetic energy. Heating liquids will demonstrate this property in experiments.
26. Find the volume of 111.6 grams of NH3 gas.
Answer:
It is 148.82 L
Explanation:
I need more points. And I hope this helps.
6. Which of the process would you use to remove salt
dissolved in water?
opicean .Filtration, evaporation, chlorination
Answer:
Evaporation
Explanation:
You can use evaporation to separate the salt from the water.
Convert 75g of NaOH to moles
Answer:
75g and I no inglish I my espanish perfec
Explanation: