(a) Maximum angle of propagation: 80.4 degrees. (b) Speed of light: 1.98 x [tex]10^8[/tex] m/s. (c) Speed of light along fiber: 1.38 x 10^8 m/s.
(a) To find the maximum angle at which light can propagate down the fiber by undergoing successive total internal reflections, we use Snell's law at the boundary of the fiber and cladding.
The critical angle is 41.6 degrees and the maximum angle is found to be 80.4 degrees.
(b) The speed of light in the fiber can be found using the formula c/n, where c is the speed of light in a vacuum and n is the refractive index.
Therefore, the speed of light in the fiber is 1.98 x [tex]10^8[/tex] m/s. (c)
To find the speed at which light actually makes its way along the fiber, we use the formula v = c/n(sinθ), where θ is the angle of incidence.
For the maximum angle found in part (a), the speed of light along the fiber is 1.38 x [tex]10^8[/tex] m/s.
For more such questions on light , click on:
https://brainly.com/question/10728818
#SPJ11
(a) To find the maximum angle relative to the fiber axis at which light can propagate down the fiber by undergoing successive total internal reflections, we can use the critical angle formula:
sin(critical angle) = n2 / n1
where n1 is the refractive index of the core (1.45) and n2 is the refractive index of the cladding (1.43).
sin(critical angle) = 1.43 / 1.45
critical angle ≈ 83.54 degrees
(b) To find the speed of light in the fiber, we can use the formula:
v = c / n1
where v is the speed of light in the fiber, c is the speed of light in a vacuum (3 x 10^8 m/s), and n1 is the refractive index of the core (1.45).
v = (3 x 10^8 m/s) / 1.45
v ≈ 2.07 x 10^8 m/s
(c) To find the speed at which light actually makes its way along the fiber, we need to consider the angle of incidence (83.54 degrees) and the actual distance traveled by the light. We can use the formula:
v_actual = v * cos(angle)
where v_actual is the actual speed, v is the speed of light in the fiber (2.07 x 10^8 m/s), and angle is the angle of incidence (83.54 degrees).
v_actual = (2.07 x 10^8 m/s) * cos(83.54)
v_actual ≈ 4.77 x 10^7 m/s
3) determine the equilibrium constant for the following reaction at 498 k. circle your answer. 2 hg(g) o2(g) → 2 hgo(s) δh° = -304.2 kj; δs° = -414.2 j/k k=?
To determine the equilibrium constant (K) for the following reaction at 498 K:
2 Hg(g) + O₂(g) → 2 HgO(s)
We need to use the Gibbs free energy equation:
ΔG° = -RTlnK
Where ΔG° is the change in Gibbs free energy, R is the universal gas constant (8.314 J/mol·K), T is the temperature in Kelvin (498 K), and lnK is the natural logarithm of the equilibrium constant.
First, we need to calculate the ΔG° using the provided ΔH° (-304.2 kJ) and ΔS° (-414.2 J/K):
ΔG° = ΔH° - TΔS°
Convert ΔH° to J/mol (1 kJ = 1000 J):
ΔH° = -304.2 kJ * 1000 = -304200
Now, calculate ΔG°:
ΔG° = -304200 J - (498 K * -414.2 J/K) = -304200 J + 206170.8 J = -98029.2 J
Now, use the Gibbs free energy equation to find K:
-98029.2 J = - (8.314 J/mol·K)(498 K) lnK
Divide both sides by -4144.572 J/mol:
23.645 = lnK
Now, solve for K by finding the exponential of both sides:
K ≈ e²³⁶⁴⁵≈ 2.24 x 10¹⁰
Therefore, the equilibrium constant for the given reaction at 498 K is approximately 2.24 x 10^10.
Learn more about exponential here:
https://brainly.com/question/29160729
#SPJ11
the reagent strip test for ketones may detect the urinary presence of:
The reagent strip test for ketones may detect the urinary presence of acetoacetate, beta-hydroxybutyrate, and acetone.
These are the three ketone bodies that can be produced in the body during a state of ketosis, which is a metabolic state in which the body uses fat for energy instead of carbohydrates. Ketosis can occur in individuals who follow a low-carbohydrate diet, have uncontrolled diabetes, or are fasting. The presence of ketones in the urine can indicate that the body is in a state of ketosis and may be a sign of uncontrolled diabetes or other metabolic disorders. The reagent strip test works by detecting the presence of nitroprusside, a chemical that reacts with ketones to produce a color change on the strip. The intensity of the color change can be used to determine the level of ketones present in the urine. The reagent strip test for ketones may detect the urinary presence of acetoacetate, beta-hydroxybutyrate, and acetone. It is important to note that the reagent strip test for ketones is not a diagnostic tool and should be used in conjunction with other tests and medical evaluations to determine the underlying cause of ketosis.
learn more about acetoacetate
https://brainly.com/question/31638826
#SPJ11
calculate [oh−] for this strong base solution: 8.2×10−2 m koh .
The [OH-] in the 8.2×10^-2 M KOH solution which is a strong base, is 8.2×10^-2 M.
To calculate the [OH-] for the strong base solution with a concentration of 8.2×10^-2 M KOH, follow these steps:
1. Identify the base: In this case, the base is KOH (potassium hydroxide), a strong base that completely dissociates in water.
2. Write the dissociation equation: When KOH dissociates in water, it forms potassium ions (K+) and hydroxide ions (OH-). The equation is:
KOH → K+ + OH-
3. Determine the concentration of OH-: Since KOH is a strong base and completely dissociates, the concentration of OH- ions in the solution will be equal to the concentration of KOH.
In this case, the concentration of KOH is given as 8.2×10^-2 M, so the concentration of OH- ions in the solution will also be 8.2×10^-2 M.
Learn more about base at: https://brainly.com/question/15638606
#SPJ11
Provide detailed, stepwise mechanism for the acid-catalyzed enolization of acetaldehyde- Provide detailed stepwise mechanlsm for the base-catalyzed enolization of acetaldehyde
The base-catalyzed mechanism is preferred over the acid-catalyzed mechanism due to the formation of a stable enolate intermediate in the former.
The acid-catalyzed enolization of acetaldehyde involves the following steps:
Step 1: Protonation of the carbonyl group by the acid catalyst (H+).
Step 2: Loss of water molecule from the protonated carbonyl group to form a resonance-stabilized carbocation intermediate.
Step 3: Deprotonation of the alpha carbon by a water molecule to form the enol intermediate.
Step 4: Protonation of the enol by another molecule of acid catalyst to form the keto form of acetaldehyde.
The base-catalyzed enolization of acetaldehyde involves the following steps:
Step 1: Deprotonation of the alpha carbon by the base catalyst (OH-).
Step 2: Formation of the enolate intermediate, which is stabilized by resonance.
Step 3: Tautomerization of the enolate to the enol form.
Step 4: Protonation of the enol by water to form the keto form of acetaldehyde.
Overall, the base-catalyzed mechanism is preferred over the acid-catalyzed mechanism due to the formation of a stable enolate intermediate in the former.
To know more about acid-catalyzed click here:
https://brainly.com/question/23970995
#SPJ11
Select the nuclide that completes the following nuclear reaction. 123 A) 12:Sb B) 1a,Te C) insb D) 111 E) none of the above
The answer cannot be determined with certainty, but option B, 1a,Te, is a possibility. Te is the chemical symbol for the element tellurium, which has an atomic number of 52.
The given nuclear reaction is incomplete, so it is impossible to determine the answer with certainty. However, we can make some assumptions based on the given information. The nuclide that is missing is the one that would combine with the reactants to form the product. The reactants are not specified, so we cannot use this information to determine the missing nuclide. However, we do know that the missing nuclide must have a mass number of 123, since this is the mass number of the product.
Based on this information, we can eliminate options C and D, since they do not have a mass number of 123. Option A, 12:Sb, is not a valid chemical symbol, so it can also be eliminated. This leaves options B and E. Option E, none of the above, is a possibility since we do not have enough information to determine the missing nuclide. Option B, 1a,Te, is a possibility since it has a mass number of 123 and contains the element Te.
A nuclear reaction involves changes to the nucleus of an atom, typically resulting in the formation of a different nuclide. The given nuclear reaction is incomplete, as it does not specify the reactants. However, we do know that the missing nuclide must have a mass number of 123, since this is the mass number of the product. Based on this information, we can eliminate some of the answer choices. Option C, insb, has a mass number of 120, which is not compatible with the mass number of the product. Option D, 111, has a mass number that is too low. Option A, 12:Sb, is not a valid chemical symbol. This leaves options B and E as possibilities. Option B, 1a,Te, has a mass number of 123 and contains the element Te. However, it is not possible to determine the correct answer with certainty without additional information.
To know more about nuclear reaction visit:
https://brainly.com/question/16526663
#SPJ11
In an atom, how many electrons can have the quantum number designations n=3, ml=0, ms=1/2?
In an atom only one electron can have the quantum number designations n=3, ml=0, ms=1/2 , as per the Pauli exclusion principle.
In an atom, the quantum numbers n, ml, and ms are used to describe the energy, orientation, and spin of electrons. The quantum number n specifies the energy level or shell of the electron, ml specifies the orientation of the electron in space, and ms specifies the spin of the electron.
For the given quantum number designations n=3, ml=0, ms=1/2, we know that the electron is in the third energy level or shell (n=3), and it is oriented along the z-axis (ml=0). The ms value of 1/2 indicates that the electron has a positive spin.
According to the Pauli exclusion principle, no two electrons in an atom can have the same set of quantum numbers. Therefore, there can be only one electron with the given set of quantum number designations in an atom.
For more such questions on quantum number, click on:
https://brainly.com/question/25786066
#SPJ11
In an atom, only two electrons can have the quantum number designations n=3, ml=0, ms=1/2.
An electron's state in an atom or molecule is described by a set of four numbers called quantum number. These values are used to identify an electron's energy, position, and orientation within an atom. The primary quantum number (n), azimuthal quantum number (l), magnetic quantum number (ml), and spin quantum number (ms) are the four quantum numbers. The electron's energy level is described by the main quantum number, the orbital's form by the azimuthal quantum number, the orbital's orientation in space by the magnetic quantum number, and the electron's spin orientation by the spin quantum number. Each electron in an atom is individually identified by a combination of these four quantum numbers.
1. The principal quantum number (n) determines the energy level and size of the orbital. n=3 refers to the third energy level.
2. The magnetic quantum number (ml) specifies the shape of the orbital. ml=0 refers to an s-orbital (spherical shape).
3. The spin quantum number (ms) indicates the electron's spin. ms=1/2 refers to one of the two possible spins an electron can have (either +1/2 or -1/2).
Since we are considering n=3 and ml=0, this corresponds to the 3s orbital. Each s-orbital can accommodate a maximum of two electrons with opposite spins. However, since ms=1/2 is specified, we are only considering electrons with that specific spin. Therefore, there can be only one electron in the 3s orbital with the quantum number designations n=3, ml=0, ms=1/2.
Learn more about quantum number here:
https://brainly.com/question/16746749
#SPJ11
how many ml of a .150m na2s solution are needed to completely react 18.5 ml of .225m nicl2 solution? a) 27.0 mL. b) 4.16 mL. c) 6.24 mL.
27.0 mL of a .150m Na[tex]_2[/tex]S solution is needed to completely react with 18.5 ml of 225m NiCl[tex]_2[/tex] solution. The correct answer is option c) 27.0 mL.
The balanced chemical equation for the reaction between Na[tex]_2[/tex]S and [tex]NiCl_2[/tex] is:
Na[tex]_2[/tex]S + NiCl[tex]_2[/tex] → 2 NaCl + NiS
From the balanced equation, we can see that one mole of NiCl[tex]_2[/tex] reacts with one mole of Na[tex]_2[/tex]S to produce one mole of NiS.
First, let's calculate the number of moles of NiCl[tex]_2[/tex] in 18.5 mL of 0.225 M solution:
moles of NiCl[tex]_2[/tex] = concentration * volume in liters
moles of NiCl[tex]_2[/tex] = 0.225 mol/L * 0.0185 L
moles of NiCl[tex]_2[/tex] = 0.00416 mol
Since one mole of NiCl[tex]_2[/tex] reacts with one mole of Na[tex]_2[/tex]S, we need 0.00416 moles of Na[tex]_2[/tex]S to completely react with the NiCl[tex]_2[/tex] .
Now, let's calculate the volume of 0.150 M Na[tex]_2[/tex]S solution that contains 0.00416 moles of Na[tex]_2[/tex]S:
moles of Na[tex]_2[/tex]S = concentration * volume in liters
0.00416 mol = 0.150 mol/L * volume in liters
volume in liters = 0.00416 mol / 0.150 mol/L
volume in liters = 0.0277 L
Finally, we convert the volume to milliliters:
volume in mL = 0.0277 L * 1000 mL/L
volume in mL = 27.7 mL
Therefore, the volume of a 0.150 M Na[tex]_2[/tex]S solution that is needed to completely react with 18.5 mL of a 0.225 M NiCl[tex]_2[/tex] solution is approximately 27.7 mL.
Since the answer choices are given in mL, we round to the nearest hundredth and select option (a) 27.0 mL.
Learn more about balanced chemical equations here:
https://brainly.com/question/28294176
#SPJ11
calculate the reactance of, and rms current in, a 260-mh radio coil connected to a 240-v (rms) 10.0-khz ac line. ignore resistance. Calculate the reactance of the coil. Express your answer to three significant figures and include the appropriate units. Calculate rms current in the coil. Express your answer to three significant figures and include the appropriate units.
The reactance of the coil is approximately 6.16 kΩ. The rms current in the coil is approximately 39.2 mA.
To find the reactance of the coil, we use the formula Xl = 2πfL, where Xl is the reactance, f is the frequency, and L is the inductance. Substituting the given values, we get Xl = 2π(10.0 kHz)(260 mH) = 6.16 kΩ. This is the reactance of the coil.
To find the rms current in the coil, we use the formula Irms = Vrms/Xl, where Irms is the rms current, Vrms is the rms voltage, and Xl is the reactance. Substituting the given values, we get Irms = (240 V)/(6.16 kΩ) = 39.2 mA. This is the rms current in the coil.
The reactance of the coil represents the opposition to the flow of current in the coil due to the inductance of the coil. The higher the inductance and frequency, the higher the reactance. In this case, the reactance is relatively high, which means that the coil will not allow a significant amount of current to flow through it.
The rms current in the coil represents the effective value of the alternating current that flows through the coil. This current will produce a magnetic field around the coil that can be used for various applications, such as in radio receivers and transmitters.
Overall, the reactance and rms current in the coil are important parameters that are used to analyze and design electronic circuits.
To learn more about reactance visit:
brainly.com/question/17129912
#SPJ11
Complete the following radioactive decay problem.210/84po —> 206/82pb+?2/4he4/2he4/2be2/4be
The missing particle in the radioactive decay problem is an alpha particle (2He4). This can be determined by balancing the mass numbers and atomic numbers on both sides of the equation.
In radioactive decay, an unstable atom loses energy by emitting radiation. This radiation can be in the form of alpha particles, beta particles, or gamma rays. Alpha particles are the most massive type of radiation, and they are made up of two protons and two neutrons. Beta particles are less massive than alpha particles, and they are made up of an electron. Gamma rays are the least massive type of radiation, and they are high-energy photons.
In the given problem, the mass number of the polonium atom is 210, and the atomic number is 84. The mass number of the lead atom is 206, and the atomic number is 82. This means that two protons and two neutrons have been lost in the decay process. The only type of radiation that can carry away this much mass is an alpha particle.
Therefore, the missing particle in the radioactive decay problem is an alpha particle (2He4).
To learn more about radioactive decay problem click here : brainly.com/question/16945017
#SPJ11
the volume of hydrogen gas at 45.0 C and 699 torr that can be produced by the reaction of 5.66g of zinc with excess sulfuric acid is_____
A. 2.84
B. 2.71x10^-4
C. 3.69x10^4
D. 2.45
E. 0.592
The volume of hydrogen gas at 45.0°C and 699 torr that can be produced by the reaction of 5.66g of zinc with excess sulfuric acid is A. 2.84 L.
To determine the volume of hydrogen gas produced, we will use the ideal gas law (PV=nRT) and stoichiometry. First, let's convert the given mass of zinc (5.66 g) to moles using its molar mass (65.38 g/mol):
5.66 g Zn × (1 mol Zn / 65.38 g Zn) = 0.0866 mol Zn
The balanced equation for the reaction is:
Zn + H₂SO₄ → ZnSO4 + H₂
From the stoichiometry, 1 mol of Zn produces 1 mol of H₂. Therefore, 0.0866 mol Zn produces 0.0866 mol H₂.
Now, let's convert the temperature to Kelvin and the pressure to atm:
T = 45.0°C + 273.15 = 318.15 K
P = 699 torr × (1 atm / 760 torr) = 0.9197 atm
We can now use the ideal gas law:
PV = nRT
V = nRT / P
V = (0.0866 mol H2)(0.0821 L·atm/mol·K)(318.15 K) / 0.9197 atm
V ≈ 2.84 L
So, the volume of hydrogen gas produced is approximately 2.84 L (option A).
Learn more about ideal gas law here: https://brainly.com/question/27870704
#SPJ11
Which of the following statement(s) is/are correct? i) Breeder reactors convert the non-fissionable nuclide, 238U to a fissionable product.ii) The most stable nucleus in terms of binding energy per nucleon is 56Fe.iii) Electric power is widely generated using nuclear fusion reactors.i and ii
The correct statement are i) Breeder reactors convert the non-fissionable nuclide, 238U to a fissionable product.ii) The most stable nucleus in terms of binding energy per nucleon is 56Fe.
Statement i is correct. Breeder reactors convert the non-fissionable nuclide, 238U to a fissionable product, 239Pu, which can undergo fission reactions to release energy. This process is called breeding and helps in increasing the amount of fissile material in the reactor.
Statement ii is also correct. The most stable nucleus in terms of binding energy per nucleon is 56Fe. This means that it requires the least amount of energy to form a nucleus of 56Fe compared to other nuclides, and it releases energy in the process.
However, statement iii is incorrect. Electric power is not widely generated using nuclear fusion reactors. Nuclear fusion is a process where two light nuclei combine to form a heavier nucleus and release a large amount of energy. It is the process that powers the sun and stars, but it is still in the experimental stage on Earth, and no commercially viable fusion reactors currently exist.
In conclusion, statements i and ii are correct, while statement iii is incorrect.
To know more about nuclear fusion visit:
brainly.com/question/21876525
#SPJ11
Identify the type of bonding within each substance. Co(s) CoCl,(s) covalent metallic ionic covalent ionic metallic CC1,1) covalent metallic ionic
The type of bonding within each substance is:
Co(s) - metallic bonding
CoCl,(s) - ionic bonding
CCl4(s) - covalent bonding
Co(s) is a metal and it forms metallic bonding, where the atoms are held together by a sea of electrons that move freely between the atoms.
CoCl,(s) is an ionic compound, where Co and Cl ions are held together by electrostatic forces of attraction between positively and negatively charged ions.
CCl4(s) is a covalent compound, where the atoms share electrons to form a stable molecule.
In summary, the type of bonding within each substance is determined by the properties of the atoms or ions that are involved, and it affects the physical and chemical properties of the substances.
To know more about bonding, visit;
https://brainly.com/question/29282058
#SPJ11
calculate the temperature (in°c) at which pure water would boil at a pressure of 652.4 torr. δhvap = 40.7 kj/mol enter to 1 decimal place.
Pure water would boil at a temperature of approximately 96.5 °C at a pressure of 652.4 torr.
The boiling point of a liquid depends on the pressure applied to the surface of the liquid. In order to calculate the boiling point of water at a pressure of 652.4 torr,
we can use the Clausius-Clapeyron equation, which relates the vapor pressure of a substance to its enthalpy of vaporization and the temperature:
ln([tex]P_{2}[/tex]/[tex]P_{1}[/tex]) = -(ΔHvap/R) × (1/[tex]T_{2}[/tex] - 1/[tex]T_{1}[/tex])
where[tex]P_{1}[/tex] and [tex]T_{1}[/tex] are the pressure and temperature of a known boiling point (such as the normal boiling point of water at 1 atm, 100 °C), [tex]P_{2}[/tex] is the pressure of the desired boiling point, ΔHvap is the enthalpy of vaporization, R is the gas constant (8.314 J/(mol·K)), and [tex]T_{2}[/tex] is the desired boiling point temperature in Kelvin.
Substituting the given values and converting pressure from torr to atm, we get:
ln(652.4/760) = -(40700 J/mol / (8.314 J/(mol·K))) × (1/[tex]T_{2}[/tex] - 1/373.15)
Solving for [tex]T_{2}[/tex], we get:
[tex]T_{2}[/tex] = 40700 J/mol / (8.314 J/(mol·K) × [ln(652.4/760) + 1/373.15])
[tex]T_{2}[/tex]= 369.6 K
Converting from Kelvin to Celsius, we get:
[tex]T_{2}[/tex] = 369.6 K - 273.15
[tex]T_{2}[/tex] ≈ 96.5 °C
Therefore, pure water would boil at a temperature of approximately 96.5 °C at a pressure of 652.4 torr. Rounded to one decimal place, the answer is 96.5 °C.
Know more about boiling point here:
https://brainly.com/question/30282615
#SPJ11
Consider the titration of a 60.0 mL of 0.317 M weak acid HA (Ka = 4.2 x 10) with 0.400 M KOH. What is the pH before any base has been added? Consider the titration of a 60.0 mL of 0.317 M weak acid HA (Ka = 4.2 x 10) with 0.400 M KOH. After 30.0 mL of KOH have been added, what would the pH of the solution be? Consider the titration of a 60.0 mL of 0.317 M weak acid HA (Ka = 4.2 x 10) with 0.400 M KOH. After 75.0 mL of KOH have been added, what would the pH of the solution be?
The pH of the weak acid solution before titration is 3.39. After the addition of 30.0 mL of 0.133 M KOH, the pH of the solution is 6.25, and after the addition of 75.0 mL of KOH, the pH of the solution is 6.80.
The steps for each part of the question:
1. Calculate the initial concentration of [H⁺] ions before any base has been added:
[H+] = sqrt(Ka x [HA]) = sqrt(4.2 x 10⁻⁷ x 0.317) = 4.06 x 10⁻⁴ M
pH = -log[H⁺] = -log(4.06 x 10⁻⁴) = 3.39
2. After 30.0 mL of KOH have been added, the number of moles of KOH is:
moles of KOH = Molarity x Volume = 0.400 x 0.0300 = 0.0120 moles
moles of HA remaining = initial moles - moles of KOH added = (0.317 x 0.0600) - 0.0120 = 0.01602 moles
moles of A⁻ formed = moles of KOH added = 0.0120 moles
Concentration of A⁻ = moles of A-/total volume = (0.0120/0.0900) = 0.133 M
Concentration of HA = (0.01602/0.0900) = 0.178 M
Ka = [H⁺][A⁻]/[HA]
[H+] = Ka x [HA]/[A⁻] = 4.2 x 10⁻⁷ x (0.178)/(0.133) = 5.60 x 10⁻⁷ M
pH = -log[H⁺] = -log(5.60 x 10⁻⁷) = 6.25
3. After 75.0 mL of KOH have been added, the number of moles of KOH is:
moles of KOH = Molarity x Volume = 0.400 x 0.0750 = 0.0300 moles
moles of HA remaining = initial moles - moles of KOH added = (0.317 x 0.0600) - 0.0300 = 0.01142 moles
moles of A- formed = moles of KOH added = 0.0300 moles
Concentration of A- = moles of A-/total volume = (0.0300/0.135) = 0.222 M
Concentration of HA = (0.01142/0.135) = 0.0846 M
Ka = [H⁺][A⁻]/[HA]
[H+] = Ka x [HA]/[A⁻] = 4.2 x 10⁻⁷ x (0.0846)/(0.222) = 1.60 x 10⁻⁷ M
pH = -log[H⁺] = -log(1.60 x 10⁻⁷) = 6.80
To know more about the KOH refer here :
https://brainly.com/question/7949561#
#SPJ11
What is the isoelectric point of glutamic acid (pka of α-co2h, 2.10; pka of β-co2h, 4.07; ph of α-nh2, 9.47)?
The isoelectric point of glutamic acid is approximately 5.79.
The isoelectric point (pI) of an amino acid is the pH at which the c acid has a net neutral charge. To calculate the pI of glutamic acid, we need to determine the pH at which the α-carboxyl group (pKa 2.10) and β-carboxyl group (pKa 4.07) are deprotonated, and the α-amino group (pH 9.47) is protonated.
Since the α-carboxyl group has the lowest pKa, it will be the first to deprotonate. At a pH higher than 2.10, the α-carboxyl group will be negatively charged (-COO-). However, the β-carboxyl group will still be protonated (COOH) and the α-amino group will also be protonated (NH3+).
pI = (pKa1 + pKa2) / 2 = (2.10 + 4.07) / 2 = 3.085
The isoelectric point of glutamic acid is 3.085, which is the pH at which the amino acid has an equal number of positive and negative charges.
The isoelectric point (pI) of glutamic acid can be calculated using the pKa values provided. Glutamic acid has three ionizable groups: α-COOH, β-COOH, and α-NH2. The pI is the pH at which the molecule carries no net charge.
To calculate the pI, you need to find the average of the pKa values that correspond to the protonation/deprotonation equilibria around the zwitterionic form. In the case of glutamic acid, these are the pKa values for α-COOH (2.10) and α-NH2 (9.47).
pI = (pKa of α-COOH + pKa of α-NH2) / 2
pI = (2.10 + 9.47) / 2
pI = 11.57 / 2
pI ≈ 5.79
To know more about iselectric visit:-
https://brainly.com/question/31609011
#SPJ11
complete combustion of 8.90 g of a hydrocarbon produced 27.0 g of co2 and 13.8 g of h2o. what is the empirical formula for the hydrocarbon? insert subscripts as necessary.
A complete combustion of 8.90 g of hydrocarbon will produced 27.0 g of CO₂ and 13.8 g of H₂O. Then, the empirical formula for the hydrocarbon is CH₂.
To determine the empirical formula of the hydrocarbon, we need to find the moles of carbon and hydrogen in the given compounds.
From the given data,
Mass of CO₂ produced = 27.0 g
Mass of H₂O produced = 13.8 g
Mass of hydrocarbon consumed = 8.90 g
Using the molar masses, we can convert the masses to moles;
Moles of CO₂ = 27.0 g / 44.01 g/mol = 0.613 mol
Moles of H₂O = 13.8 g / 18.02 g/mol = 0.766 mol
Moles of hydrocarbon = 8.90 g / molar mass
Next, we need to find the ratio of moles of carbon and hydrogen in the hydrocarbon. For this, we can use the following equations;
Moles of carbon = Moles of CO₂
Moles of hydrogen =0.5 x Moles of H₂O
Substituting the values, we get;
Moles of carbon = 0.613 mol
Moles of hydrogen = 0.5 x 0.766 mol
= 0.383 mol
Now we need to find the empirical formula by dividing each number of moles by the smallest number of moles;
Empirical formula = C0.613/0.383H1.00
Multiplying both sides by 2, we get;
Empirical formula = C₁.60H₂.00
Therefore, the empirical formula for the hydrocarbon is CH₂.
To know more about empirical formula here
https://brainly.com/question/11588623
#SPJ4
The bond length in the fluorine molecule F2 is 1.28 A, what is the atomic radius of chlorine?
a. 0.77 A
b. 0.64 A
c. 0.22 A
d. 1.21 A
Answer:
0.64A
Explanation:
There is a well-known relationship between the bond length of a diatomic molecule and the atomic radius of its constituent atoms, known as the covalent radius. Specifically, the covalent radius of an atom is half the bond length between two identical atoms in a diatomic molecule.
Therefore, to determine the atomic radius of chlorine (Cl), we can use the bond length of fluorine (F2) and the fact that the two atoms in F2 are identical.
Since the bond length of F2 is given as 1.28 A, the covalent radius of fluorine is 1.28/2 = 0.64 A.
Since both fluorine and chlorine are halogens, they have similar electronic configurations and form similar covalent bonds. Therefore, we can use the covalent radius of fluorine as an estimate for the covalent radius of chlorine.
Thus, the atomic radius of chlorine is approximately 0.64 A
when 200. ml of 1.50 × 10-4 m hydrochloric acid is added to 135 ml of 1.75 × 10-4 m mg(oh)2, the resulting solution will be
Answer:
the answer and the explanation is on the picture hope you understood
Explanation:
The resulting solution will be a dilute solution of [tex]MgCl_2[/tex] with a concentration of [tex]3.33 \times 10^{-5} M[/tex].
To determine the nature of the resulting solution, we can use the following approach:
Step 1: Compose a balanced chemical equation for the reaction of magnesium hydroxide and hydrochloric acid (HCl).
[tex]2HCl + Mg(OH)_2 \rightarrow MgCl_2 + 2H_2O[/tex]
Count the moles of HCl and magnesium hydroxide in the solution in step two.
Number of HCl moles = (concentration of HCl) × (volume of HCl)
= ([tex]1.50 \times 10^{-4} M[/tex]) × (0.200 L) = [tex]3.00 \times 10^{-5[/tex] moles
Number of moles of Mg(OH)2 = (concentration of Mg(OH)2) × (volume of Mg(OH)2)
= ([tex]1.75 \times 10^{-4} M[/tex]) × (0.135 L) = [tex]2.36 \times 10^{-5[/tex] moles
Step 3 - Identify the reaction's limiting reagent. The amount of the product created is determined by the reactant that is totally consumed or the limiting reagent. We compare the moles of each reactant and utilize the stoichiometry of the balanced equation to determine the limiting reagent. By looking at the equation in its whole, we can observe that 2 moles of HCl and 1 mole of magnesium hydroxid react:
One mole of magnesium hydroxide and two moles of HCl react.
[tex]3.00 \times 10^{-5[/tex] moles of HCl react with (1/2) × [tex]3.00 \times 10^{-5} = 1.50 \times 10^{-5[/tex]moles of [tex]Mg(OH)_2[/tex]
[tex]2.36 \times 10^{-5[/tex] moles of [tex]Mg(OH)_2[/tex] is less than [tex]1.50 \times 10^{-5[/tex] moles of [tex]Mg(OH)_2[/tex], so [tex]Mg(OH)_2[/tex] is the limiting reagent.
Step 4: Calculate the amount of [tex]MgCl_2[/tex] form. From the balanced equation, we know that 1 mole of [tex]Mg(OH)_2[/tex] produces 1 mole of [tex]MgCl_2[/tex]:
1 mole of [tex]Mg(OH)_2[/tex] produces 1 mole of [tex]MgCl_2[/tex]
[tex]1.50 \times 10^{-5[/tex]moles of [tex]Mg(OH)_2[/tex] produces [tex]1.50 \times 10^{-5[/tex] moles of [tex]MgCl_2[/tex]
Step 5: Calculate the concentration of [tex]MgCl_2[/tex] in the resulting solution:
Concentration of [tex]MgCl_2[/tex] = (moles of [tex]MgCl_2[/tex]) / (total volume of solution) = ([tex]1.50 \times 10^{-5[/tex] moles) / (0.200 L + 0.135 L) = [tex]3.33 \times 10^{-5[/tex] M
To learn more about dilute solutions
https://brainly.com/question/24869996
#SPJ4
Calculate the percent yield of the aldol condensation-dehydration reaction.
I did the following
Put 0.8 mL aldehyde, 0.2 mL ketone, 4 mL ethanol, 3 mL of 2M sodium hydroxide in a flask. Then swirled it for 15 min. Then I added 6 mL ethanol and 4 mL of 4% acetic acid. I put the solution on ice and crystals formed. I ended up with 0.305 g of product. Please show me how to calcualte my percent yield for my product.
ketone= acetone (0.791 g/ mL)
aldehyde= 4-Methylbenzaldehyde (1.019 g/ m
The percent yield of the aldol condensation-dehydration reaction is 69.2%.
To calculate the percent yield of the aldol condensation-dehydration reaction, we need to compare the actual yield of the product with the theoretical yield that we would expect based on the amounts of starting materials used. The balanced chemical equation for the reaction is:
2 aldehyde + 2 ketone + base + ethanol → aldol + water + salt
From the given information, we used 0.8 mL of aldehyde (density = 1.019 g/mL) and 0.2 mL of ketone (density = 0.791 g/mL), which correspond to masses of 0.8152 g and 0.1582 g, respectively. The molar mass of the aldehyde is 120.15 g/mol, and the molar mass of the ketone is 58.08 g/mol. Therefore, we have:
moles of aldehyde = 0.8152 g / 120.15 g/mol = 0.00679 mol
moles of ketone = 0.1582 g / 58.08 g/mol = 0.00272 mol
Assuming complete conversion of the starting materials, the theoretical yield of the product can be calculated based on the limiting reagent (the ketone in this case). The molar ratio of ketone to aldol in the balanced equation is 1:1, so we would expect to obtain 0.00272 mol of product. The molar mass of the aldol is 162.23 g/mol, so the theoretical yield in grams is:
theoretical yield = 0.00272 mol * 162.23 g/mol = 0.441 g
Therefore, the percent yield of the reaction is:
percent yield = (actual yield / theoretical yield) * 100%
percent yield = (0.305 g / 0.441 g) * 100%
percent yield = 69.2%
So, the percent yield of the aldol condensation-dehydration reaction is 69.2%.
To know more about Aldol condensation-dehydration reaction visit:
https://brainly.com/question/30706388
#SPJ11
linear polystyrene has phenyl groups that are attached to alternate, not adjacent, carbons of the polymer chain. refer to the answer to question four (4) to explain the mechanism basis for this fact
The mechanism of the polymerization reaction, more precisely the characteristics of the monomer and the reaction circumstances, can be used to explain why phenyl groups in linear polystyrene are bonded to alternate, not neighbouring, carbons of the polymer chain.
Styrene (C8H8), a vinyl monomer, is used in the polymerization step that creates polystyrene. A free radical initiator is often employed to start the reaction and spread the growth of the polymer chain in a conventional free radical mechanism. Each styrene monomer's vinyl group (CH=CH2) adds to the vinyl group of another styrene monomer throughout the polymerization process. As a result, a linear chain of repeating units connected by covalent bonds is created. The vinyl group of the styrene monomer is joined to the phenyl group (C6H5) in the case of polystyrene. As a result, during the polymerization process, the phenyl group is absorbed into the polymer chain. The phenyl groups in the polystyrene chain are situated at alternate carbons because they are joined to the vinyl group, which is situated at a different carbon in the styrene monomer. This is due to the head-to-tail nature of the polymerization reaction, in which the vinyl group of one monomer combines with the vinyl group of another monomer in a way that causes the phenyl groups to be arranged along the polymer chain in an alternating pattern. Consequently, in linear polystyrene, the location of the phenyl groups is a result of the styrene monomer's makeup and the polymerization reaction's process.
For more such questions on polymerization
https://brainly.com/question/28763804
#SPJ11
which pure molecular substance will have the lowest vapor pressure at 25 oc? data sheet and periodic table ch3oh ch3ch2oh ch3ch2ch2oh ch3ch2ch2ch2oh
The pure molecular substance with the lowest vapor pressure at 25°C is CH₃(CH₂)₃OH (1-pentanol).
The vapor pressure of a substance depends on the strength of its intermolecular forces. The stronger the intermolecular forces, the lower the vapor pressure. The intermolecular forces in a molecule depend on its size and shape, as well as the types of atoms and functional groups present.
Out of the given options, 1-pentanol (CH₃(CH₂)₃OH) has the largest molecular size and longest carbon chain, making it the most polar and having the strongest intermolecular forces of attraction.
Therefore, it has the lowest vapor pressure at 25°C compared to the other molecules. On the other hand, methanol (CH₃OH) has the smallest molecular size and the weakest intermolecular forces, making it the most volatile and having the highest vapor pressure at 25°C.
Learn more about vapor pressure here:
https://brainly.com/question/30447018
#SPJ11
Complete the following nuclear equations. Write the mass number, atomic number, and symbol for the remaining particle.
a. 3216S + ? → 3015P + 42He
b. ? + 10n → 2411Na + 42He
c. 4020Ca + ? → 4019K + 11H
d. 24195Am + 42He → ? + 24397Bk
e. 24696Cm + 126C → 410n + ?
a.The missing particle is a neutron (10n). The symbol for the remaining particle is n. b. The missing particle is a proton (11H). The symbol for the remaining particle is 27010Ne. c. The missing particle is an alpha particle (42He). The symbol for the remaining particle is He. d. The missing particle is a proton (11H). The symbol for the remaining particle is 24597Bk. e. The missing particle is an alpha particle (42He). The symbol for the remaining particle is 254No.
a. The missing particle is a neutron (10n).
32 (mass number of sulfur) + 1 (mass number of neutron) = 30 (mass number of phosphorus) + 4 (mass number of helium)
16 (atomic number of sulfur) + 0 (atomic number of neutron) = 15 (atomic number of phosphorus) + 2 (atomic number of helium)
The symbol for the remaining particle is n.
b. The missing particle is a proton (11H).
X (unknown mass number) + 1 (mass number of proton) = 24 (mass number of sodium) + 4 (mass number of helium)
X + 1 = 28
X = 27
X (atomic number of unknown particle) + 1 = 11 (atomic number of hydrogen) + 2 (atomic number of helium)
X = 10
The symbol for the remaining particle is 27010Ne.
c. The missing particle is an alpha particle (42He).
40 (mass number of calcium) + 4 (mass number of alpha particle) = 39 (mass number of potassium) + 1 (mass number of hydrogen)
20 (atomic number of calcium) + 2 (atomic number of alpha particle) = 19 (atomic number of potassium) + 1 (atomic number of hydrogen)
The symbol for the remaining particle is He.
d. The missing particle is a proton (11H).
241 (mass number of americium) + 4 (mass number of helium) = X (unknown mass number) + 243 (mass number of berkelium)
95 (atomic number of americium) + 2 (atomic number of helium) = X + 97 (atomic number of berkelium)
X = 245
X + 1 = 97
The symbol for the remaining particle is 24597Bk.
e. The missing particle is an alpha particle (42He).
246 (mass number of curium) + 12 (mass number of carbon) = 4 (mass number of neutron) + X (unknown mass number)
96 (atomic number of curium) + 6 (atomic number of carbon) = 0 (atomic number of neutron) + X
X = 254
The symbol for the remaining particle is 254No.
To know more about neutron visit:
https://brainly.com/question/31977312
#SPJ11
What is the pressure, in kilopascals, of 2.50 L of NO2 containing 1.35 mol at 47.0°C?
The pressure of 2.50 L of NO2 containing 1.35 mol at 47.0°C is approximately 36.196 kilopascals (kPa).
The pressure of a gas can be determined using the ideal gas law equation, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. To find the pressure of the NO2 gas, we need to convert the given temperature from Celsius to Kelvin. Adding 273.15 to the Celsius temperature gives us:
47.0°C + 273.15 = 320.15 K
Next, we can plug the values into the ideal gas law equation:
P * 2.50 L = 1.35 mol * (8.314 J/(mol*K)) * 320.15 K
Simplifying the equation:
P = (1.35 mol * 8.314 J/(mol*K) * 320.15 K) / 2.50 L
P = 36.196 kPa
For more such questions on kilopascals (kPa).
https://brainly.com/question/32044956
#SPJ8
The material covered in this homework assignment relates directly to aqueous geochemistry specifically acid-base chemistry. Show all your work. 1. Calculate the concentrations of all ions and the pH of a solution containing 0.002 moles of silicic acid (HASiO4) per liter of solution. Silicic acid is a weak acid so you can treat it as a monoprotic acid 1. 2. If the 0.002 moles silicic acid was added to a liter solution that had a pH of 8.2, what percentage of the silicic acid would dissociate? 2. Constant Kw 10 K 10.9.71
For part 1, the concentration of H+ ion is found by solving the equilibrium expression for the dissociation of silicic acid, and then using the equation for weak acid dissociation to find the pH. For part 2, the percentage of silicic acid that dissociates is found by comparing the initial concentration of silicic acid to the concentration of the dissociated form of the acid, using the dissociation constant and the pH of the solution.
1. The concentration of all ions and pH of a solution containing 0.002 moles of silicic acid per liter of solution, we can use the following chemical equation:
HASiO₄ + H₂O ⇌ H₃O+ + SiO₄⁴⁻
The equilibrium expression for this reaction is:
Ka = [H₃O⁺][SiO₄⁴⁻]/[HASiO₄]
where Ka is the acid dissociation constant of silicic acid.
Since silicic acid is a monoprotic weak acid, we can assume that the concentration of H₃O⁺ is equal to the concentration of HASiO₄ that dissociates. Let x be the concentration of H₃O⁺ (or SiO₄⁴⁻) that dissociates.
Then, the equilibrium concentrations can be expressed as follows:
[HASiO₄] = 0.002 - x
[H₃O⁺] = x
[SiO₄⁴⁻] = x
Substituting these values into the equilibrium expression and solving for x, we get:
Ka = x² / (0.002 - x) = 1.2 × 10⁻⁸
Solving for x, we get:
x = 5.07 × 10⁻⁶ M
Therefore, the concentrations of all ions in the solution are:
[HASiO₄] = 0.002 - 5.07 × 10⁻⁶ = 0.001995 M
[H3O⁺] = [SiO₄⁴⁻] = 5.07 × 10⁻⁶ M
To calculate the pH of the solution, we can use the equation:
pH = -log[H₃O⁺]
Substituting the value of [H₃O⁺] into this equation, we get:
pH = -log(5.07 × 10⁻⁶) = 5.295
Therefore, the pH of the solution is 5.295.
2. If 0.002 moles of silicic acid were added to a liter solution that had a pH of 8.2, we can calculate the initial concentration of H₃O⁺ as follows:
pH = -log[H₃O⁺]
8.2 = -log[H₃O⁺]
[H₃O⁺] = 6.31 × 10⁻⁹ M
Assuming that x moles of silicic acid dissociates, the equilibrium concentration of H₃O⁺ can be expressed as:
[H₃O⁺] = 6.31 × 10⁻⁹ + x
The percentage of silicic acid that dissociates can be calculated as follows:
% dissociation = (moles of H₃O⁺ formed) / (initial moles of silicic acid) × 100%
% dissociation = x / 0.002 × 100%
Substituting the value of [H3O+] from the equilibrium expression into the equation for Ka and solving for x, we get:
x = 1.20 × 10⁻⁹ M
Therefore, the percentage of silicic acid that dissociates is:
% dissociation = 1.20 × 10⁻⁹ / 0.002 × 100% = 0.06%
Therefore, only a small percentage of the silicic acid dissociates in the solution.
To learn more about silicic acid refer here:
https://brainly.com/question/31792506#
#SPJ11
draw structural formulas of all chloroalkanes that undergo dehydrohalogenation when treated with koh to give the following alkene as the major product.
The alkene is not provided in the question, so it is impossible to draw the structural formulas of all chloroalkanes that undergo dehydrohalogenation with KOH to give the specified alkene as the major product.
However, in general, primary and secondary chloroalkanes can undergo dehydrohalogenation with KOH to give the corresponding alkene as the major product, while tertiary chloroalkanes tend to undergo elimination to form a mixture of alkenes.
In the dehydrohalogenation reaction, KOH acts as a strong base, abstracting a proton from the beta-carbon atom of the chloroalkane, which leads to the formation of a carbon-carbon double bond and the elimination of HCl.
It is important to note that the specific alkene formed as the major product depends on the structure of the starting chloroalkane, and factors such as steric hindrance and neighboring functional groups can influence the reaction outcome.
Learn more about dehydrohalogenation here :
https://brainly.com/question/31285083
#SPJ11
considering the following reaction between magnesium metal and gaseous chlorine. what mass (g) of chlorine would be required to react completely with 12.15 g of magnesium?
To determine the mass of chlorine required to react completely with 12.15 g of magnesium, we need to use the balanced chemical equation for the reaction:
Mg + Cl2 → MgCl2
From this equation, we can see that 1 mole of magnesium reacts with 1 mole of chlorine to produce 1 mole of magnesium chloride. The molar mass of magnesium is 24.31 g/mol, and the molar mass of chlorine is 35.45 g/mol.
We can use the given mass of magnesium and its molar mass to calculate the number of moles present:
moles of Mg = mass of Mg / molar mass of Mg
moles of Mg = 12.15 g / 24.31 g/mol
moles of Mg = 0.500 mol
Since the stoichiometry of the reaction is 1:1, we know that 0.500 moles of chlorine are required to react completely with the given amount of magnesium. We can convert this to grams of chlorine using its molar mass:
mass of Cl2 = moles of Cl2 x molar mass of Cl2
mass of Cl2 = 0.500 mol x 35.45 g/mol
mass of Cl2 = 17.72 g
Therefore, 17.72 g of chlorine would be required to react completely with 12.15 g of magnesium.
To know more about mass, visit;
https://brainly.com/question/86444
#SPJ11
The Henry's law constant for the solubility of nitrogen in water is 6.4 x 104 M/atm at 25°C. At 0.75 atm of N2, what mass of N2(8) dissolves in 1.0 L of water at 25°C? a. 4.8 x 104 g b. 8.5 x 104 g c. 4.5 x 10' g d. 1.3 x 104g
Every moment a bottle of Pepsi (or any other carbonated beverage) is opened, Henry's law is put into action. Usually, pure carbon dioxide is retained in the gas above a sealed carbonated beverage at a pressure that is just a little bit higher than atmospheric pressure. The correct option is A.
Henry's law, a gas law, states that, while the temperature is held constant, the amount of gas that is dissolved in a liquid is directly proportional to the partial pressure of that gas above the liquid. Henry's law constant (sometimes abbreviated as "kH") is the proportionality constant for this relationship.
c = kH × p
c = 6.4 x 10⁴ × 0.75
c = 4.8 × 10⁴ mol / L
Mass in 1 L = 4.8 × 10⁴ × 1 = 4.8 × 10⁴ g
Thus the correct option is A.
To know more about Henry's law, visit;
https://brainly.com/question/11994691
#SPJ1
calculate the concentration of curcumin (m) that you isolated from turmeric based on your calibration curve from part a. what is the concentration of the diluted extract
Without knowing the specifics of the experiment or the calibration curve, it is impossible to provide a calculation of the concentration of curcumin that was isolated from turmeric or the concentration of the diluted extract.
The concentration of curcumin that was isolated from turmeric can be determined by measuring its absorbance using a spectrophotometer and comparing it to the standard curve generated from known concentrations of curcumin. The concentration of the diluted extract can be calculated using the dilution equation, which states that the concentration of the diluted solution is equal to the concentration of the original solution multiplied by the dilution factor. The dilution factor is the ratio of the volume of the original solution to the total volume of the diluted solution.
Learn more about concentration of curcumin here;
https://brainly.com/question/25593466
#SPJ11
Calculate the molarity of a solution made by adding 0.126 g of ammonium acetate to enough water to make 250.0 mL of solution.
A. 3.70 x 10−3 M
B. 5.30 x 10−3 M
C. 6.54 x 10−3 M
D. 8.12 x 10−3 M
E. 8.25 x 10−3 M
The molarity of the solution is 5.30 x 10−3 M (option b).
To calculate the molarity of a solution, we need to know the number of moles of solute present in a given volume of solution.
First convert the mass of ammonium acetate (0.126 g) to moles using its molar mass (77.08 g/mol).
This gives us 0.00163 moles of ammonium acetate. Next, we need to convert the volume of the solution (250.0 mL) to liters (0.250 L).
Finally, we divide the number of moles of ammonium acetate by the volume of the solution in liters to get the molarity. The morality is 5.30 x 10−3 M, which is option B.
For more such questions on molarity, click on:
https://brainly.com/question/30404105
#SPJ11
The molarity is obtained by dividing the number of moles of ammonium acetate by the litres of the solution's volume. Option B has a morality of 5.30 x 103 M.
We need to know how many moles of solute there are in a specific volume of solution in order to calculate the molarity of a solution.
Using the molar mass of ammonium acetate (77.08 g/mol), first convert the mass of ammonium acetate (0.126 g) to moles.
We now have 0.00163 moles of ammonium acetate as a result. The volume of the solution (250.0 mL) must then be converted to litres (0.250 L).
The molarity is obtained by dividing the number of moles of ammonium acetate by the litres of the solution's volume. Option B has a morality of 5.30 x 103 M.
learn more about molarity here:
https://brainly.com/question/8732513
#SPJ11
what is the solubility of lead chloride in pure water? (how many moles of pbcl2 could be completely dissolved in one liter
The solubility of lead chloride (PbCl2) in pure water is relatively low. At room temperature (25°C), approximately 0.0102 moles of PbCl2 can be completely dissolved in one liter of water.
This value may slightly vary depending on temperature, but overall, lead chloride remains sparingly soluble in water. It is important to note that the solubility of lead chloride can vary depending on temperature, pH, and the presence of other ions in the solution.
Additionally, it is crucial to handle lead compounds with care as they can be toxic to human health and the environment. Proper precautions should be taken when working with lead chloride to minimize exposure and prevent contamination.
More on solubility: https://brainly.com/question/31662200
#SPJ11
The solubility of PbCl2 in pure water is approximately 0.0016 moles per liter. This means that in one liter of pure water, 0.0016 moles of PbCl2 can dissolve before the solution becomes saturated and any additional PbCl2 will precipitate out of the solution.
The solubility of PbCl2 increases with increasing temperature, as well as with the presence of certain ions, such as chloride ions, which can form soluble complexes with Pb2+ ions.
The presence of certain other ions, such as sulfate ions, can decrease the solubility of PbCl2 due to the formation of insoluble lead sulfate (PbSO4) precipitates.
Read more about Solubility.
https://brainly.com/question/29661360
#SPJ11