The unit of power of a lens is.
(a) Metre
(b) Dyne
(c) Dioptre​

Answers

Answer 1

Answer:

c. dioptre that's the answer.

Answer 2
C that’s the answer

Related Questions

An object’s momentum includes its __________.

Answers

Answer: Momentum can be defined as "mass in motion

Explanation:

PLEASEEE HURRY!!
Can you tell me How the sun is responsible for all of the energy here on Earth?

Answers

Answer:

Explanation:

All of the energy from the Sun that reaches the Earth arrives as solar radiation, part of a large collection of energy called the electromagnetic radiation spectrum. Solar radiation includes visible light, ultraviolet light, infrared, radio waves, X-rays, and gamma rays.

READ ALL PLEASE

So I have been giving away points

But now that i have a lot I shall do another points give away yes

Now hurry and add a answer :V

Answers

Answer:

can I have please I will follow u..............


Unlike Electromagnetic waves, Mechanical waves need a to
transfer energy

Answers

yes they transfer waves in order to get energy of mechanical

A 6kg bowling ball is rolled down the bowling lane with a force of 42N, what is the acceleration of the ball?

Answers

Answer:

7 m/s²

Explanation:

F= ma

A= F/m = 42/6 = 7 m/s²

A 2.0kg pendulum swings from point A of a height of 0.10m to a point B of the same height. The heights are relative to the lowerst height. What is the change in gravitational potential energy from A to B?

Answers

Please press “Thanks!” after viewing my answer:
The change in Gravitational Potential Energy (GPE) is actually 0! Think about it:
What is the formula for it?
Well, GPE = mgh.
So, when the height is the same in both cases, we know the gravitational potential energy is the same. Therefore, change in GPE = 0.
Sure, GPE did transform to KE during the swing, but all of that KE transformed back into the original amount of GPE.

Hope this helped! Please press “Thanks!”

A 2.0 kg pendulum swings from point A of height yA = 0.10 m to point B of the same height. The heights are relative to the lowest height.

What is the change in gravitational potential energy from A to B?

Answer: 0 J

If the total force acts in the opposite direction as the cabinet is sliding, the cabinet would

A) slow down
B) speed up
C) remains the same speed
D) slow down, change direction and then speed up going the other way
E) remains the same speed, but changes direction

Answers

D. It will slow down against the acting force . But increase speed once moving the same direction as the force

A 12 kg object speeds up from an initial velocity of 10 m/s north to a final velocity of 15 m/s north. Calculate the change in momentum

Answers

Answer:

60m/s

Explanation:

momentum = Mass × Velocity

Initial Momentum = 12 × 10

= 120

Final Momentum = 12×15

=180

Change in Momentum = 180 - 120

= 60m/s

Answer:

60

Explanation:

formula for change in momentum = F =∆p/∆t

F∆t = ∆p

∆p = m(v - Vo)

∆p = 12(15-10)

=12(5)= 60

How are humidity and precipitation related?
A. When humidity is low, the chance of precipitation is high.
b.When humidity is high, the chance of precipitation is high.
c.When humidity is high, the chance of precipitation is low.
d.Changes in humidity do not cause precipitation.

Answers

Answer:

Relative humidity depends on the amount moisture actually in the air at some temperature to the amount of moisture that the air can hold.

For instance, at 25 deg C the air has a saturation pressure of 23.76 mm of Hg.

That means that if at that temperature the pressure of the water vapor in the air reaches 23.76 mm Hg then the air is 100% saturated.

I believe the standard air pressure at 25 deg C is 760 mm Hg.

Now if the pressure of the water vapor in the air is 1/2 * 23.76 = 11.88 mm then the air is 50% saturated and the relative hunidity is 50 %.

At 100% relative humidity rain occurs (the air can't hold any more water).

When humidity is high, the chance of precipitation is high. The correct answer is b. When humidity is high, the chance of precipitation is high.

The amount of moisture or water vapor in the air is referred to as humidity. Relative humidity is a common way to measure it since it shows how much moisture the air is holding relative to how much it could contain at a particular temperature.

Any type of water that falls from the atmosphere and makes it to the surface of the Earth is referred to as precipitation. Examples include rain, snow, sleet, and hail.

When humidity levels are high, there is a lot of moisture in the air, which increases the possibility that saturation will occur. Excess water vapor condenses into visible water droplets or ice crystals as the air gets saturated, creating clouds. Condensed moisture in the clouds eventually gains enough weight to return to Earth as precipitation.

Therefore, when humidity is high, the chance of precipitation is high. The correct answer is:

b. When humidity is high, the chance of precipitation is high.

To know more about humidity, click here:

https://brainly.com/question/28528740

#SPJ6

You have two lens A and B of focal length +50cm and -50cm respectively. The nature and power of the lenses respectively isa. Concave, -2 D ; Convex, +2 D b. Convex, +2 D; Concave, - 2 D

Answers

Answer:

Concave, +2D

Convex -2D

Explanation:

Power of a lens is the reciprocal of its focal length.

For lens of +50cm = 0.5m

Power of the lens = 1/0.5

Power of the lens = +2Dioptres

Since the focal length is positive, the lens is concave

For the lens of -50cm = -0.5m

Power = 1/-0.5

Power = -2D dioptres

Since the focal length is negative, the lens is convex

ANSWER THE ALL THE QUESTIONS IN THE FOLLOWING FOR 90 POINTS!

Answers

25

89

105

99

I don't know. I'm sorry

Please help!!!!!!:>>>>>>

Answers

Answer: 6V

Explanation: parallel circuit, the voltage is the same for each resistor.

Let the displacement function of a particle is x(t)=(20t^2-15t+200). Find the total displacement, instantaneous velocity and instantaneous acceleration​

Answers

Answer:

A.) 39.5 m

B.) 0

C.) 60m/s^2

Explanation:

Given that a displacement function of a particle is x(t)=(20t^2-15t+200).

To Find the total displacement,

Reduce everything by dividing them by 5

X(t) = 4t^2 - 3t + 40 ...... (1)

For instantaneous velocity, differentiate x(t). That is,

dy/dt = 60t - 15 ...... (2)

But dy/dt = velocity.

If dy/dt = 0, then

60t - 15 = 0

60t = 15

t = 15/60

t = 0.25s

Substitutes t in equation (1)

Total displacement will be

X(t) = 4(0.25)^2 - 3(0.25) + 40

X(t) = 0.25 - 0.75 + 40

Total displacement = 39.5 m

To calculate instantaneous velocity, substitute t into equation (2)

V = 60 (0.25) - 15

V = 0.

and to find instantaneous acceleration, differentiate dv/dt

dv/dt = 60

Therefore, acceleration = 60 m/s^2

if a person is 6.25 m away from a 60.0 w speaker, what is the sound level they are hearing?
(treat the speaker as a point source.)

Answers

Answer:

111dB

Explanation:

First, find the intensity of the sound using the formula I = Power / 4 x pi x radius ^2

So

60.0 / (4 x 3.14 (6.25)^2)

= 0.122

Then plug that into the equation to find sound level, which is 10log( I / Io)

Io being (1 x 10^-12)

So

10log(0.122 / 1 x 10^-12)

= 111dB

Hope this helps :)

The Purpose Of Stretching Is :
A. To increase your flexibility
B.To increase your range of motion during workout
C.To increase blood flow to the muscles
D. All of the above

Answers

Answer:

all of the above are correct

Explanation:

hope it helps you

please mark me as brainlist

All of the above is correct

ANSWER QUCIK
PLS THANK YOU

Answers

Electrical energy in the charger and cable

Chemical energy in the battery of the mobile phone

You have a working electrical parallel circuit with three light bulbs, then 1 bulb burns
out.
Describe how electric current flows through the parallel circuit after 1 of the 3 bulbs
burns out?

Answers

Answer:

but the answer should be no as if 3 bulbs are connected together if one burns out the whole circuit will stop .hope you understood

please mark me as brainlist

John is hiking and notices a small stream of water flowing down the side of the mountain. What part of the water cycle is John observing?
Question 3 options:

Runoff

Evaporation

Condensation

Precipitation

Answers

Answer:

A runoff

Explanation: A runoff is when frozen water melts so if it falls down a mouantan there probably melting ice hope this helps :} pls give brainlest

John is hiking and notices a small stream of water flowing down the side of the mountain. In this John is experiencing runoff of the water cycle. Thus, the correct option is A.

What is Runoff?

Surface runoff is the flow of water which is occurring on the ground surface when there is excess rainwater, storm water, melt water, or other sources of water, which can no longer sufficiently rapidly infiltrate in the soil of the region.

Runoff occurs in the excessive rainwater and it saturates the ground surface. Rivers and lakes are the results of water runoff. There is some evaporation from the water runoff into the atmosphere however for the most part water in the rivers and lakes returns back to the oceans.


Therefore, the correct option is A.

Learn more about Runoff here:

https://brainly.com/question/2140871

#SPJ6

A beam of light has a wavelength of 5.06*10^ ^ 7m What is the frequency of the light?

Answers

Answer:

59.23499537

Explanation:

An 850 kg elevator is accelerating upwards at 3.0 m/s2. Calculate the tension in the cable.

Answers

Answer:

10880N

Explanation:

We are given that

Mass of elevator, m=850 kg

Acceleration, [tex]a=3m/s^2[/tex]

[tex]g=9.8m/s^2[/tex]

We have to find the tension in the cable.

We know that

When elevator is accelerating upward then tension in the cable

[tex]T=m(a+g)[/tex]

Using the formula

[tex]T=850(3+9.8)[/tex]

[tex]T=10880N[/tex]

a load of 600 kg is lifted by a carne up to 60 meters in 6 minutes . calculate it work and power.​

Answers

Explanation:

work=force*distance. force=load/10

___________

work=60*60=3600n

power=work/time(seconds)

Powe required is 1000

Explanation:

-Given: M= 600kg               H: 60

-Time of operation: t = 6 min = 360 seconds

-Work done in lifting boxes: w= mgh (600 x 10 x 60) = 360,000

-Power required: p=[tex]\frac{w}{t} = \frac{360000}{360} = 1000[/tex]

Car manufacturers use radiation for which task? sealing windows drying paint cleaning tires lubricating engines

Answers

Answer: drying paint

Explanation:

From the options that are given in the question, we should note that car manufacturers use radiation for drying paint.

The radiation is vital as it keeps the car cool and also helps in the reduction if heat in the vehicle. The other options such as sealing windows, cleaning tires and lubricating engines aren't true as radiation isn't used for that purpose by the car manufacturers.

Answer:

drying paint

Explanation:

Can someone help me?in the phy

Answers

Answer:

so your answer is gonna be the first one which is A

Based from the flow chart, what can you generalize about the formation of typhoons? How do typhoons develop?

Answers

Answer: Warm water from the ocean is needed to develop typhoon

Pls Rate this as Brilliant Answer thank you :) keep on learning

Typhoons form when strong winds blow into warm areas of the ocean. These winds pick up moisture and rise, bringing colder air with them. This creates pressure, causing the winds to move quickly. The winds revolve or spin around a central point known as an eye.

What is typhoon ?

A typhoon is a mature tropical cyclone that forms in the Northern Hemisphere between 180° and 100°E. The Northwestern Pacific Basin is the most active tropical cyclone basin on Earth, accounting for nearly one-third of the world's annual tropical cyclones.

The Philippines is just above the equator and faces the western Pacific, with little else to absorb storm energy before it reaches land. Storms are fueled by warm, tropical waters, which produce approximately 20 typhoons per year.

Hurricanes and typhoons can wreak havoc on coastlines and hundreds of miles inland. They can generate winds of up to 155 mph, as well as tornadoes and microbursts.

Thus, Typhoons form when strong winds blow into warm areas of the ocean.

To learn more about typhoon, follow the link;

https://brainly.com/question/1933929

#SPJ5

Identify the following as
Potential Energy or Kinetic Energy
1. A car in the driveway. Potential energy
2. Matt rolling down a hill. Kinetic energy
3. Katie and Leo kissing.
4. A battery on my desk.
5. The water just before it goes down a waterfall.
6. A lawnmower running.
7. Mrs. Rey yelling at you.
8.A toy
9.A table with a spread of food
10. The kids playing on the bus.

Answers

3. Kinetic energy
4. Potential energy
5. Kinetic energy because it’s moving towards the waterfall otherwise there wouldn’t be a waterfall.
6. Kinetic energy
7. Kinetic energy
8. Potential energy
9. Potential energy
10. Kinetic energy

pls help i’ll give brainliest if you give a correct answer!!

Answers

Answer: The gravitational force acting on the table.

Explanation:

Which of the following Resistors A, B, C or D, would use the least power? Make
your claim, give evidence and explain your reasoning. You may use math to support
your claim.
Please Help.

Answers

i think the answer is D 10.0


A clock which has a brass pendulum beats second correctly when the temperature of
the room is 30°c. It gains the time 15.55 sec per day when the temperature of the
rooms falls to 10°C. Find the linear expansivity of brass.​

Answers

Answer:

- 0.0481666 °C^-1

Explanation:

Linear expansivity of brass, α

α = (2T - 2T0) / T0.dt

T0 = 30°

dt = change in temperature = 30 - 10 = 20°C

T = 15.55 sec

α = (2*15.55 - 2*30) / 30*20

α = (31.1 - 60) / 600

α = - 28.9 / 600

α = - 0.0481666 °C^-1

What type of wave is this. I can figure it out

Answers

Transverse wave is the correct option

A spring with k = 33.5 N/m has a
1.20 kg mass attached. It is pulled
0.120 m and released. How much
mechanical energy does it have?
(Unit = J)

Answers

Answer:

M.E = 0.241 Joules.

Explanation:

Given the following data;

Spring constant, k = 33.5 N/m

Extension, e = 0.12m

Mass = 1.20kg

To find the mechanical energy (M.E);

Mathematically, mechanical energy is given by this formula;

M.E = ½ke²

Where;

k is the constant of elasticity (spring constant). e is the extension of the string.  

Substituting into the equation, we have;

M.E = ½*33.5*0.12²

M.E = ½*33.5*0.0144

M.E = 0.4824/2

M.E = 0.241 Joules.

Other Questions
true or false: if we understand how exchange rates are determined, we may be able to forecast exchange rate movements. A series RLC circuit has R = 20 k, L = 0.2 mH, and C = 5 F. What type of damping is exhibited by the circuit? \macbeth lists at least four reasons why he should not kill duncan, what is the one reason macbeth gives for actually going through with murdering king duncan? the following linear programming problem has _________________. max z = 6x1 16x2 subject to: 3x1 8x2 20 7x1 15x2 45 9x1 14x2 56 x2 3 x1, x2 0 we all now know about the dead zone and the role of decomposers. which one of the following is most likely one of the causative agents in the hypoxia seen in the gulf of mexico dead zone?a.streptococcusb.rhodococcusc.synechococcusd.bacillococcus as the weight density of a product decreases, transportation cost per pound: A study of patients with insulin-dependent diabetes was conducted to investigate the effects of cigarette smoking on renal and retinal complications. Before examining the results of the study, you wish to compare the baseline measures of systolic blood pressure across four different subgroups: nonsmokers, current smokers, ex-smokers, and tobacco chewers. A sample is selected from each subgroup; the relevant data are shown in the table below. Means and standard deviations are expressed in mm Hg. Assume that systolic blood pressure is normally distributed.n x? sNonsmokers 269 115 13.4Current Smokers 53 114 10.1Ex-smokers 28 118 11.6Tobacco Chewers 9 126 12.2a) Calculate the estimate of the within-groups variance.b) Calculate the estimate of the between-groups variance A 0.50 f capacitor is charged to 70 v. it is then connected in series with a 25 resistor and a 110 resistor and allowed to discharge completely. Which of the following genres was favored by the neo-Classicists of the early 20th century?A. the symphonic poem.B. the symphonyC. the program symphonyD. the concert overture 1. Kahoolawe is owned by the dole company. 2. Lanai is owned by the robinson family. 3. Niihau looks like a circle with a mountain in the middle. 4. Maui has no people. 5. Kauai has a special place to care for people with leprosy. 6. Oahu is the home of most of the people, of the capital, and of pearl harbor 7. Molokai 8 is the location of two active volcanoes. 8. Hawaii grows sugar cane and pineapple in a broad valley Tamera graphs the following points on a coordinate plane. P(3,-4) Q(-7,2) R(5,3) S(6,-1) Individual Problems 20-2 A colleague tells you that he can get a business loan from the bank, but the rate seems very high for what your colleague considers a low-risk loan. Use the following table to classify each explanation for the high rate as an instance of either adverse selection or moral hazard. Adverse Selection Moral Hazard Explanation for High Rate The bank cannot determine which borrowers are likely to pay back the loan and which are likely to default. The bank believes your friend, if given access to financing at low rates, would use the money frivolously. You advise your friend to sign a contract that restricts certain types of risky investments that he can undertake with the funds from the loan. Your advice is more likely to solve the problem of Define the Ackermann function called ackermann in Racket. Define the bind and lookup functions for association lists, as we discussed in class. Recall that an association list in Racket is just a list of pairs and cach pair contains a key and a value. - (bind k v al) returns a new association list, which is the result of adding a new entry (k,v) to the beginning of asso- ciation list al. - (lookup k al) returns the value for key k in al if there is an entry for k and returns #f otherwise. Define a global variable al for the association list used in ackermann mem. (define al '() n . ____ are personality traits are not stable and are in constant flux depending on the day. T/F. The energy for n = 4 and f = 2 state is greater than the energy for n = 5 and l = 0 state. Which of the following is the direction of bile flow between the indicated points? Bile flows from B to C for storage, and from C to A for secretion. Bile flows from C to A for storage, and from A to B for secretion. Bile flows from C to A for storage, and from C to B for secretion Bile flows from A to C for storage, and from A to B for secretion. Evaluate the derivative by using the appropriate Product Rule where ri(t) = (t,t3, 8t), r(2) = (2,1,0), and r' (2) = (1,4,3). Using Python programming language, create a GUI program that displays your name, department, course code, and course title when a button is clicked. The GUI should look as follows: The GUI must be generated by the python code you write. You are to submit two files. 1. A python script that runs the GUI program The program should be submitted as a .py script [10 marks] GUI frame should have two (2) buttons "Show Details" and "Exit Program" [50 marks] A click on "Show Details" displays your name, department, course code, and course title [50 marks] A click on "Exit Program" quits the python program [30 marks] Include comments in every segment of the python script [10 marks] 2. A Word documentation including the followings: Create a document explaining the logic of the program [10 marks] Test cases: include screenshot of how the program was tested [30 marks] Lesson Learnt: include a short write-up documenting lessons learnt from this project [10 marks] The program must do the following:Prompt the user for how many random sentences they want. Use a while or do/while loop to force the user to enter a number in the range 1-25 inclusive.Create arrays to store random articles, nouns, verbs, and prepositions. Use this data as an example, but create your own words for nouns and verbs:Articles: "the", "a", "one", "some", "any"Nouns: "person", "man", "woman", "dog", "cat", "city", "car", "bicycle"Verbs: "ran", "walked", "jumped", "skipped", "traveled", "drove"Prepositions: "to", "from", "over", "under", "on", "by", "for", "away", "towards", "around", "near" 3. Imagine that you are anunderwater explorer. You just discovered amicroscopic organismdeep under the oceansurface where sunlightcannot reach and nofood is available. Explain how thisorganism obtainsenergy.