Does anyone understand This question if you do can you tell me the answer

Answer:

Explanation: A charged body loses its charge when we touch it with our hand because some of the charge flows through our body to the ground earthing. As a result the charge on the body decreases every time we touch it. This is because of earthing.

Explanation:

yw .

Explanation:

When we touch a charged body, it loses its charge, due to the process of earthing. Our body is a good conductor of electricity. It transfers the charges to the earth

Answer:

d

Explanation:

is the answer

The basketball's angular velocity ω at time t is

ω = 27 rad/s + (-0.15 rad/s²) t

It comes to a stop when ω = 0, which happens for

0 = 27 rad/s - (0.15 rad/s²) t

t = (27 rad/s) / (0.15 rad/s²)

t = 180 s

In this time, the ball would undergoes an angular displacement θ of

θ = (27 rad/s) t + 1/2 (-0.15 rad/s²) t ²

Plug in t = 180 s and solve for θ :

θ = (27 rad/s) (180 s) - 1/2 (0.15 rad/s²) (180 s)² = 2430 rad

One complete revolution corresponds to a turn of 2π rad, so the ball makes

(2430 rad) / (2π rad/rev) ≈ 386.747 rev

or about 387 revolutions as it slows down.

Answer:

0.78 m

Explanation:

us the formula

speed = frequency x wavelength

343 = 440 x wavelength

343 / 440 = wavelength

wavelength = 0.78 m

I think the last option, you wrote wrongly, it is supposed to be 0.78 not 0.078 .

if you think I am wrong please do tell me, I will redo this.

hope this helps

Answer:

what exactly are the following?

Answer:

3.8 × 108 m

Explanation:

Use formula: v^2 = G x m central / r

G = 6.77 e-11

Also, it was right on Edge.

Good luck!

The distance between Earth and its moon is 3.8×10⁸ m.

A force that causes a body to follow a curved path is known as a centripetal force. It always moves in a direction that is the opposite of the body's velocity and in the direction of the immediate center of curvature of the path.

It is "a force by which bodies are dragged or driven, or in any manner tend, towards a point as to a center," according to Isaac Newton.

Given parameters:

Mass of the Earth: M = 6.0 × 10²⁴ kg.

Mass of the moon: m = 7.3 × 10²² kg.

Moon's tangential speed: v = 1,025 m/s

Let the distance between the center of Earth and the moon is r.

Hence,

GMm/r² = mv²/r

r = GM/v²

= 6.7 × 10 ⁻¹¹ × 6.0 × 10²⁴ / (1,025)²

= 3.82×10⁸ m.

Hence, by subtracting Earth's radius = 6.4 x 10⁶ m, we get, the distance between Earth and its moon is 3.8×10⁸ m.

Learn more about centripetal force here:

https://brainly.com/question/11324711

#SPJ2

Answer:

0.2 I took the test

Explanation:

I took the test

The time period of the whole wave cycle is 6 seconds but the time period of one complete wave is about 4 seconds here. The inverse of this time period is the frequency, that is 0.2 Hz.

Frequency by definition is the number of events per unit time. Frequency of a wave is the number of wave cycles in one second. It is the inverse of the time period.

Frequency is directly related to the energy of the wave. As the frequency increases, energy of the wave also increases. In the given graph the wave cycle is given for a time of 6 seconds.

The time period for one complete wave  is 4 second from the graph.

thus, T = 4 s

v =  1/T

  = 1/4 = 0.2 s⁻¹ or 0.2 Hz  

Therefore, the frequency of the wave shown, is 0.2 Hz.

Find more on frequency:

https://brainly.com/question/14316711

#SPJ5

Answer:

b) Quartz Clock

Explanation:

It's is a very type of clock which uses the vibration of quartz crystals to measure time accurately

Answer:

55.56%

Explanation:

We'll begin by calculating the work done in pushing the wedge. This can be obtained as follow:

Force (F) = 900 N

Distance (s) = 0.1 m

Workdone (Wd) =..?

Wd = F × s

Wd = 900 × 0.1

Wd = 90 J

Finally, we shall determine the efficiency. This can be obtained as follow:

Work output = 50 J

Work input = 90 J

Efficiency =?

Efficiency = work output / work input

Efficiency = 50 / 90 × 100

Efficiency = 55.56%

Thus, the efficiency is 55.56%

Answer:

The turning effect of a force is known as the moment. It is the product of the force multiplied by the perpendicular distance from the line of action of the force to the pivot or point where the object will turn. When undoing a nut fastened to a screw by hand one realises that the amount of force required is a lot greater than when undoing the same nut using a spanner.

Explanation:

Answer: Friction

Explanation:

Friction and the normal force would be the two initial forces to overcome.

Answer: Friction

Explanation: The object must be pushed along which will create friction which nmust be overcome.

Answer:

if somthing is warm or if somthing moves it usally has energy

Answer:

I. increase the force that the engine provides.

II. decrease the mass of the car

Explanation:

Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.

Mathematically, it is given by the formula;

Force = mass * acceleration

[tex] Acceleration = \frac {Force}{mass} [/tex]

In this scenario, a car manufacturer wants to change its car’s design to increase the car’s acceleration. Thus, the changes the engineers should consider making to the design is to increase the force that the engine provides and decrease the mass of the car.

Answers:

Answer:

Mass is the quantity of substance in an object

Answer: 21.9 mm

Explanation:

Given that five independent measurements are made of the diameter of a cylinder. Results, in mm, are: 21.8; 21.6; 22.1; 21.9; 22.1. What should be the reported value of the cylinder's diameter?

The measurement of the diameter of cylinder is measured several time in order to reduce the uncertainty called random error.

The reported value of the cylinder's diameter should be the average or the mean value of the whole measurement.

That is

Mean = (21.8 + 21.6 + 22.1 + 21.9 + 22.1) ÷ 5

Mean = 109.5 ÷ 5

Mean = 21.9 mm

Therefore, the reported value of the cylinder diameter will be 21.9 mm

Answer:

Explanation:

Answer:

gravitational attraction

Answer:

Trabajo realizado = 600 Nm

Explanation:

Dados los siguientes datos;

Fuerza = 200 Newton

Distancia = 3 metros

Para encontrar el trabajo realizado; Trabajo realizado = fuerza * distancia

Sustituyendo en la ecuación, tenemos; Trabajo realizado = 200 * 3

Trabajo realizado = 600 Nm

Answer:

There are two fundamental types of generators known as AC (alternating current) and DC (direct current) generators. While the technique of producing electricity is the same in both types, AC and DC power become different in terms of their applications – the way in which loads receive electric power.

Explanation:

An electric generator is a device that converts mechanical energy obtained from an external source into electrical energy as the output. ... Instead, it uses the mechanical energy supplied to it to force the movement of electric charges present in the wire of its windings through an external electric circuit.

Answer:

2km/min

Explanation:

Velocity= change in distance / time taken

Velocity = 20km/10min=2km/min south

South is placed there to show what direction she went, as velocity has both magnitude and direction

Answer:

sea breeze

Explanation:

Answer:

A sea breeze

Explanation:

Answer:

Newton's law of gravitational holes good irrespective of the nature of two bodies., i.e., big or small, at all times, at all locations and for all distances in the universe.

Explanation:

It is called so because it is applicable on all bodies having mass, and the bodies will be governed by the same law, that is newton's law of gravitation. Thus, as it is applicable universally, it is called as universal law.

Answer:

i think it would be a but i am not 100% sure on that