Given: m∥n , m∠1=65∘ , m∠2=60∘ , and BD−→− bisects ∠ABC . Prove: m∠6=70∘ Line m parallel to line n. Line t passing through both lines. There are four angles formed by lines m and t intersecting at point B. The lower left angle is labeled 5. The upper right angle is angle A B C with point A on line t and point C on line m. Angle A B C is separated by ray B D. The angle on the right side of the ray is labeled 4. The angle on the left side is labeled 3. A segment joins points A and D forming a triangle with angle 3 as one of its interior angles. The other two interior angles are labeled 1 and 2. There are four angles formed by lines n and t intersecting. The upper left angle is labeled 6. Put responses in the correct input to answer the question. Select a response, navigate to the desired input and insert the response. Responses can be selected and inserted using the space bar, enter key, left mouse button or touchpad. Responses can also be moved by dragging with a mouse. It is given that m∥n , m∠1=65∘ , m∠2=60∘ , and BD−→− bisects ∠ABC . Because of the triangle sum theorem, m∠3=55∘ . By the Response area, ∠3≅∠4 , so m∠4=55∘ . Using the Response area, m∠ABC=110∘ . m∠5=110∘ because vertical angles are congruent. Because of the Response area, m∠5+m∠6=180∘ . Substituting gives 110∘+m∠6=180∘ . So, by the Response area, m∠6=70∘ .

The volume of the freezer can be calculated by multiplying its length, width, and height. Therefore, the volume of the freezer in cubic inches is:

V = 36 * 24.5 * 72.5 = 64,620 cubic inches

Therefore, the volume of the freezer is 64,620 cubic inches.

The amplitude of the function is 7, the period is π/3, and the phase shift is 0.

To find the amplitude, period, and phase shift of the function y = 7cos(6(xπ/6)), let's examine its different components:

1. Amplitude: The amplitude of a cosine function is the absolute value of its coefficient. In this case, the coefficient is 7. So, the amplitude is |7| = 7.

2. Period: The period of a cosine function is determined by dividing 2π by the absolute value of the coefficient of the angle (inside the parentheses). Here, the coefficient of the angle is 6. Therefore, the period is 2π/|6| = 2π/6 = π/3.

3. Phase Shift: The phase shift refers to the horizontal shift of the function. It is calculated by dividing the term added or subtracted inside the parentheses by the coefficient of the angle. In this case, the term inside the parentheses is (xπ/6). Since there is no term being added or subtracted, the phase shift is 0.

In summary, for the function y = 7cos(6(xπ/6)), the amplitude is 7, the period is π/3, and the phase shift is 0.

To know more about function, refer to the link below:

https://brainly.com/question/12610516#

#SPJ11

There is no maximum value for 2x2y in the domain of nonnegative numbers since the derivative is a constant (24), which indicates that the function 24x is rising for all nonnegative x values.

The largest value that a function can accept inside a particular domain is known as the maximum value of a function in mathematics. The maximum value can either be a global maximum, which is the biggest number throughout the entire function domain, or a local maximum, which is the largest value within a specific area.

Calculus and optimisation issues are two areas of mathematics where determining a function's maximum value is crucial. Finding the crucial points of a function, setting the derivative's value to zero to identify those places, and then evaluating the function at those points and the domain's endpoints will yield the function's greatest value.

To find the maximum value of 2x2y given that xy=12 and both x and y are nonnegative numbers, we can follow these steps:

Step 1: Express y in terms of x using the given equation xy=12.
y = 12/x

Step 2: Substitute y in the expression we want to maximize, which is 2x2y.
2x2y = 2x2(12/x) = 24x

Step 3: To find the maximum value of 24x, we can use calculus by taking the first derivative with respect to x and set it equal to 0 to find the critical points.
[tex]d(24x)/dx = 24[/tex]

Since the derivative is a constant (24), it means that the function 24x is increasing for all nonnegative x values, and there's no maximum value for 2x2y within the domain of nonnegative numbers.

Learn more about nonnegative numbers here:

https://brainly.com/question/31495812

#SPJ11

Stone columns called stelae were covered in writing that traces family and military history. ​

When derived from Latin, a stele, or alternatively stela, is a stone or wooden slab that was built as a memorial in antiquity and is often taller than it is wide. Steles frequently have text, decoration, or both on their surface. These could be painted, in relief carved, or inscribed. Numerous reasons led to the creation of stele.

Some of the most impressive Mayan artifacts are stone columns known as stelae, which show portraits of the rulers along with family trees and conquest tales.

Learn more about columns at;

https://brainly.com/question/8515224

#SPJ4

complete question;

Stone columns called ---------------were covered in writing that traces family and military history. ​

The accuracy and confidence of Dawn's memory of the Challenger explosion will depend on a variety of factors, including her individual memory abilities, the emotional impact of the trauma, and other situational factors.

Firstly, it is possible that Dawn's memory of the Challenger explosion will be accurate, as the event was a significant and memorable one that received widespread media coverage. However, her level of confidence in her memory may be lower than usual due to the emotional impact of the trauma. Research has shown that emotional arousal can impair memory recall and lead to lower confidence in one's recollections.

Additionally, it is possible that Dawn may experience some form of post-traumatic amnesia (PTA) related to the Challenger explosion. PTA is a temporary memory impairment that can occur following a traumatic event, and it can affect the encoding and retrieval of new memories. However, PTA is typically short-lived and most people recover their memories relatively quickly.

Finally, it is also possible that Dawn may be very confident in her answer about the Challenger explosion, even if her memory is not completely accurate. Confidence is not always a reliable indicator of memory accuracy, and some individuals may feel more confident in their memories even if they are partially or completely incorrect.

for such more question on  accuracy

https://brainly.com/question/27881561

#SPJ11

Based on research, it is likely that Dawn will be accurate in her recollection of the Challenger space shuttle explosion, but may have low confidence in her memory due to the traumatic event. It is also possible that she may experience post-traumatic amnesia, which could affect her ability to recall details about the event.

However, if she is confident in her answer, it is likely that she has a clear memory of the event and can accurately recall what happened. It is important to note that memories can be affected by many factors, including emotions and time, so it is important to take these into account when evaluating the accuracy of a memory.
Dawn was 15 when she experienced the Challenger space shuttle explosion, which is a significant memory from her past. Research suggests that, when recalling this event, she may be accurate in her recollection but have low confidence in her answer. This could be due to the traumatic nature of the event and the passage of time, which can cause uncertainty in memory recall. Despite the possibility of post-traumatic amnesia, she might still provide a generally accurate account of the incident, but with less certainty in the details.

To learn more about Amnesia: brainly.com/question/7416546

The three numbers are x = y = 9.625 and z = 0.75, and the maximum value of the quantity 2 is 20.375

We can use the AM-GM inequality to maximize the quantity 2.

From the given equation, we have:

1/yxz = 20

Multiplying both sides by yxz, we get:

1 = 20yxz

yxz = 1/20

Now, let's consider the sum of the three numbers:

x + y + z = 20

Using the AM-GM inequality, we have:

[tex](x + y + z)/3 > = (xyz)^{(1/3)}[/tex]

Substituting the value of xyz, we get:

[tex](x + y + z)/3 > = (1/20)^{(1/3)}[/tex]

(x + y + z)/3 >= 0.25

Multiplying both sides by 3, we get:

x + y + z >= 0.75

Since we want the sum of the numbers to be exactly 20, we can rewrite this as:

20 - x - y >= 0.75

x + y <= 19.25

So, the sum of x and y must be less than or equal to 19.25.

To maximize the quantity 2, we can take x = y = 9.625 and z = 0.75,

since this makes the sum of x and y as close to 19.25 as possible while still satisfying the equation and being positive.

Therefore, the three numbers are x = y = 9.625 and z = 0.75, and the maximum value of the quantity 2 is:

2(x + yz) = 2(9.625 + 0.75*0.75) = 20.375/

For similar question on inequality.

https://brainly.com/question/24372553

#SPJ11

To find positive number whose sum is 20 and the quantity 2 is maximized, we can use the AM-GM inequality. According to this inequality, the arithmetic mean of a set of positive numbers is always greater than or equal to their geometric mean. That is,

(a + b + c)/3 ≥ (abc)^(1/3)

Now, we need to rearrange the equation 1/yxz = 20 to get the values of a, b, and c. We can rewrite it as yxz = 1/20.

Next, we can assume that a + b + c = 20 and apply the AM-GM inequality to the product abc to maximize the value of 2. That is,

2 = 2(abc)^(1/3) ≤ (a + b + c)/3

Hence, the maximum value of 2 is 2(20/3)^(1/3), which occurs when a = b = c = 20/3.

Therefore, the positive numbers whose sum is 20 and the quantity 2 is maximized are 20/3, 20/3, and 20/3.
To maximize the quantity 2 with the given equation 1/(yxz) = 20 and positive numbers whose sum is 20 (x+y+z=20), we first rewrite the equation as yxz = 1/20. Now, using the Arithmetic Mean-Geometric Mean (AM-GM) inequality, we have:

(x+y+z)/3 ≥ ((xyz)^(1/3))

Since x, y, and z are positive, we can say that:

20/3 ≥ ((1/20)^(1/3))

From here, we find that x, y, and z should be as close to each other as possible to maximize the quantity 2. One such possible solution is x = y = 19/3 and z = 2/3. Therefore, the positive numbers x, y, and z are approximately 19/3, 19/3, and 2/3, which maximizes the quantity 2.

Learn more about Arithmetic Mean-Geometric Mean here: brainly.com/question/31962103

#SPJ11

The solution to the initial value problem is:

y = (25/4) (-cos 3t + 1), with initial condition y(0) = 0.

The given initial value problem is:

dy/dt + 4y = 25 sin 3t, y(0) = 0

This is a first-order linear differential equation. To solve this, we need to find the integrating factor, which is given by e^(∫4 dt) = e^(4t).

Multiplying both sides of the differential equation by the integrating factor, we get:

e^(4t) dy/dt + 4e^(4t) y = 25 e^(4t) sin 3t

The left-hand side can be rewritten as the derivative of the product of y and e^(4t), using the product rule:

d/dt (y e^(4t)) = 25 e^(4t) sin 3t

Integrating both sides with respect to t, we get:

y e^(4t) = (25/4) e^(4t) (-cos 3t + C)

where C is the constant of integration.

Applying the initial condition, y(0) = 0, we get:

0 = (25/4) (1 - C)

Solving for C, we get:

C = 1

Substituting C back into the expression for y, we get:

y e^(4t) = (25/4) e^(4t) (-cos 3t + 1)

Dividing both sides by e^(4t), we get the solution for y:

y = (25/4) (-cos 3t + 1)

Therefore, the solution to the initial value problem is:

y = (25/4) (-cos 3t + 1), with initial condition y(0) = 0.

To know more about linear differential equation refer here:

https://brainly.com/question/12423682

#SPJ11

A force of -14j N is applied to a particle located at the position vector r⃗ = (8i^ + 5j^) m.

The given information states that a force vector F⃗ is exerted on a particle. The force vector is represented as F⃗ = -14j^ N, where -14 indicates the magnitude of the force and j^ represents the unit vector along the y-axis. Additionally, the particle is located at the position vector r⃗ = (8i^ + 5j^) m, where 8i^ represents the position along the x-axis and 5j^ represents the position along the y-axis.

The negative sign in the force vector indicates that the force is directed opposite to the y-axis, which means it is acting downward. The magnitude of the force is 14 N. The position vector indicates that the particle is located at the position (8, 5) in terms of Cartesian coordinates. The i^ and j^ components represent the x and y directions, respectively. Combining these pieces of information, we can conclude that a force of -14 N is applied in the downward direction to a particle located at the coordinates (8, 5) in the x-y plane.

Learn more about y-axis here: https://brainly.com/question/30901684

#SPJ11

The position, s(t), of the particle at time t if initially s(0) = 3 is (2) s(t) = 10 - 7 cos(t) - 6 sin(t).

To find the position, s(t), of the particle at time t, we need to integrate the velocity function, v(t), with respect to time:

s(t) = ∫ v(t) dt

Since the velocity function is v(t) = 7 sin(t) - 6 cos(t), we have:

s(t) = ∫ (7 sin(t) - 6 cos(t)) dt

Integrating each term separately, we get:

s(t) = -7 cos(t) - 6 sin(t) + C

where C is the constant of integration.

To find the value of C, we use the initial condition s(0) = 3:

s(0) = -7 cos(0) - 6 sin(0) + C = -7 + C = 3

C = 10, and the position function is:

s(t) = -7 cos(t) - 6 sin(t) + 10

Rewriting this equation in the form of answer choices, we get:

s(t) = 10 - 7 cos(t) - 6 sin(t)

For similar questions on Position

https://brainly.com/question/28953055

#SPJ11

The position, s(t), of the particle at time t, given the initial condition s(0) = 3 and the velocity v(t) = 7sin(t) - 6cos(t), is s(t) = 9 - 7sin(t) - 6cos(t).

To find the position, we integrate the velocity function with respect to time. Integrating the velocity function v(t) = 7sin(t) - 6cos(t) gives us the position function s(t).

The indefinite integral of sin(t) is -cos(t), and the indefinite integral of cos(t) is sin(t). When integrating, we also take into account the initial condition s(0) = 3 to determine the constant term.

Integrating the velocity function, we get:

s(t) = -7cos(t) - 6sin(t) + C

To determine the constant term C, we use the initial condition s(0) = 3:

3 = -7cos(0) - 6sin(0) + C

3 = -7(1) - 6(0) + C

3 = -7 + C

C = 10

Substituting the value of C back into the position function, we obtain:

s(t) = 9 - 7sin(t) - 6cos(t)

Therefore, the position of the particle at time t, with the initial condition s(0) = 3, is given by s(t) = 9 - 7sin(t) - 6cos(t).

To learn more about integral  click here

brainly.com/question/31433890

#SPJ11

Answer: x = 0.9

Step-by-step explanation: This is a dilation.

to find the scale factor, do image/pre image.

That means 1.6/6.4 = 0.25. 0.25 or 1/4 is your scale factor.

Now apply that to the side in the larger figure that corresponds to x.

0.25 × 3.6 = 0.9

To determine the variance of a geometric random variable X with parameter p, we can use the conditional variance formula.

The formula for the variance of a geometric random variable is given by:

Var(X) = (1 - p) / (p^2)

Where p is the parameter of the geometric distribution, representing the probability of success on each trial.

This formula assumes that the random variable X represents the number of trials required until the first success in a sequence of independent Bernoulli trials, where each trial has a probability of success p.

By plugging in the value of p into the formula, you can calculate the variance of the geometric random variable X.

To  learn more about  variance click here:

brainly.com/question/31583202

#SPJ11

(a)  The cumulative distribution function F(t) = 0 for t<0, F(t) = t/a for 0<=t<=a, and F(t) = 1 for t>a.

(b)  The reliability function R(t) = 1 for t<0, R(t) = 1-t/a for 0<=t<=a, and R(t) = 0 for t>a.

(c) The hazard rate h(t) = 1/t for 0<t<=a, and the failure rate is decreasing.

(d)  The mean time to failure MTTF = a/2 and tmedian = a/2.

(e) p(T > a) = 0 and the uniform distribution does not have the memoryless property.

(a) The cumulative distribution function (CDF) for a uniform distribution over (0,a] is given by:

F(t) = P(T ≤ t) =

{ 0 if t < 0,

{ t/a if 0 ≤ t ≤ a,

{ 1 if t > a.

(b) The reliability function is defined as R(t) = 1 - F(t).

Therefore, for the uniform distribution over (0,a], we have:

R(t) =

{ 1 if t < 0,

{ 1 - t/a if 0 ≤ t ≤ a,

{ 0 if t > a.

(c) The hazard rate h(t) is defined as the instantaneous rate of failure at time t, given that the system has survived up to time t.

It is given by:

h(t) = f(t) / R(t),

where f(t) is the probability density function (PDF) of the distribution.

For the uniform distribution over (0,a], the PDF is constant over the interval (0,a], and zero elsewhere:

f(t) =

{ 1/a if 0 < t ≤ a,

{ 0 otherwise.

Therefore, we have:

h(t) =

{ 1/t if 0 < t ≤ a,

{ undefined if t ≤ 0 or t > a.

Since the hazard rate is decreasing with time, the failure rate is also decreasing.

This means that the system is more likely to fail early on than later on.

(d) The mean time to failure (MTTF) is given by:

MTTF = ∫₀ᵃ t f(t) dt = ∫₀ᵃ t/a dt = a/2.

The median time to failure (tmedian) is the time t such that F(t) = 0.5. Since F(t) is a linear function over the interval (0,a], we have:

tmedian = a/2.

(e) The probability that T > a is zero, since the uniform distribution is defined over the interval (0,a]. Therefore, p(T > a) = 0.

The uniform distribution does not have the memoryless property, which states that the probability of failure in the next time interval depends only on the length of the interval and not on how long the system has already been operating.

The uniform distribution is not memoryless because as time passes, the probability of failure increases, unlike in a memoryless distribution where the probability of failure remains constant over time.

For similar question on cumulative distribution function.

https://brainly.com/question/17074573

#SPJ11

The correct probability density function (PDF) for the uniform distribution defined over the interval from 25 to 40 is:

f(x) = 1/15 for 25 ≤ x ≤ 40

f(x) = 0 elsewhere

This means that the PDF is constant over the interval from 25 to 40, and is zero everywhere else.

The other PDFs provided are incorrect:

f(x) = 1/40 for all x would not be a uniform distribution over the interval from 25 to 40, since the PDF would be the same for values outside of the interval.

f(x) = 5/8 for 25 < x < 40 and f(x) = 0 elsewhere is not a valid PDF, since the total area under the curve must equal 1.

f(x) = 1/25 for 0 < x < 25 and f(x) = 0 elsewhere is not a uniform distribution over the interval from 25 to 40,

since it only assigns non-zero probability density to values in the interval from 0 to 25.

To know more about probability refer here:

https://brainly.com/question/30034780

#SPJ11

The characteristic equation for the recurrence relation is (r-1)(r-4)=0. This equation has two roots:

r=1 and r=4. Therefore, the general form of the solution is an = a1(1)n + a2(4)n. Therefore, the correct answer is A.

The recurrence relation can be written as an = an-1 + 4an-2. Substituting the general form of the solution into th

is equation, we get a1(1)n + a2(4)n = a1(1)n-1 + a2(4)n-1 + 4a1(1)n-2 + 4a2(4)n-2. Dividing both sides by 4n-2, we get (a1/4)(1)n-2 + a2(1)n-2 = (a1/4)(1)n-3 + a2(4)n-3 + a1(1)n-4 + a2(4)n-4. This equation holds for all n. Therefore, equating coefficients of like terms, we get a1/4 = a1/4, a2 = 4a2, a1 = a1/4, and a2 = 4a2. Solving these equations, we get a1 = a1/4 and a2 = 4a2.

Therfore, the general form of the solution is an = a1(1)n + a2(4)n.    

To know more about series visit-

https://brainly.com/question/28163163

#SPJ11

The general form of the solutions of the recurring relation with the following characteristic equation is ( an=a1(1)n-a2(4)n.

The general form of the solutions of the recurrence relation with the characteristic equation (r-1)(r-4)=0 is a linear combination of the form an=a1(1)n+a2(4)n, where a1 and a2 are constants determined by the initial conditions of the recurrence relation.

This can be seen by factoring the characteristic equation into two linear factors: r-1=0 and r-4=0, which correspond to the two possible roots of the characteristic equation.

The solution to the recurrence relation is a linear combination of these two roots raised to the power of n, with the coefficients determined by the initial values of the sequence.

Therefore, the correct answer is A.

Know more about characteristic equation here:

https://brainly.com/question/31428714

#SPJ11

If the correlation between two variables in a sample is r=1, the best description of the resulting scatterplot is that the points lie perfectly on a straight line with a positive slope.

A correlation coefficient (r) measures the strength and direction of the linear relationship between two variables. When the correlation coefficient is 1,

it indicates a perfect positive linear relationship between the variables. In this case, every data point in the scatterplot falls precisely on a straight line with a positive slope.

The scatterplot represents the relationship between the two variables, with each data point plotted based on its corresponding values for the two variables.

With a correlation coefficient of 1, all the data points in the scatterplot align exactly on a straight line. This implies that as one variable increases, the other variable also increases in a consistent and proportional manner.

The scatterplot will exhibit a tight, upward-sloping pattern, where there is no variability or scatter around the line.

This indicates a strong and predictable relationship between the variables. Each point in the scatterplot will have the same x and y values, resulting in a perfect positive correlation.

To know more about linear click here

brainly.com/question/30444906

#SPJ11

To find the length of the other side of a right triangle with a side of length 0.25 and a hypotenuse of length 0.33,

we can use the Pythagorean theorem, which states that the sum of the squares of the legs (the two shorter sides) is equal to the square of the hypotenuse.

We can solve for the missing leg, which we'll call x, using the formula a^2 + b^2 = c^2, where a and b are the two legs and c is the hypotenuse:0.25^2 + x^2 = 0.33^2

Simplifying and solving for x, we have:x^2 = 0.33^2 - 0.25^2x^2 = 0.1084

Taking the square root of both sides gives:x ≈ 0.3293

Rounding to the nearest hundredth, we have:x ≈ 0.33Therefore, the length of the other side is approximately 0.33 units.

To know more about , visit

https://brainly.com/question/16893462

#SPJ11

The length of the other side is approximately 0.22 (rounded to the hundredths place). Answer: 0.22.

According to the Pythagorean theorem, in a right triangle, the sum of the squares of the two shorter sides is equal to the square of the hypotenuse.

Let the length of the other side be a.

By the Pythagorean Theorem, a² + b² = c²

where c is the hypotenuse.

Then:

a² + 0.25² = 0.33²a² + 0.0625

= 0.1089a²

= 0.1089 - 0.0625a²

= 0.0464a

[tex]= \sqrt(0.0464)a \approx 0.2157[/tex]

Rounding to the hundredths place, the length of the other side of the right triangle is approximately 0.22.

Therefore, the length of the other side is approximately 0.22 (rounded to the hundredths place).

Answer: 0.22.

To know more about length, visit:

https://brainly.com/question/32060888

#SPJ11

The image is located 6.7 cm behind the lens, and is 3.7 cm tall (1.34 times the height of the object).

Using the thin lens equation, we can find the position of the image formed by the lens:

1/f = 1/d0 + 1/di

where f is the focal length of the lens, d0 is the object distance (the distance between the object and the lens), and di is the image distance (the distance between the lens and the image).

Substituting the given values, we get:

1/20 = 1/5 + 1/di

Solving for di, we get:

di = 6.7 cm

This tells us that the image is formed 6.7 cm behind the lens.

To find the height of the image, we can use the magnification equation:

m = -di/d0

where m is the magnification (negative for an inverted image).

Substituting the given values, we get:

m = -(6.7 cm)/(5.0 cm) = -1.34

This tells us that the image is 1.34 times the size of the object, and is inverted.

Know more about lens here:

https://brainly.com/question/29834071

#SPJ11

The negative sign indicates an inverted image. Thus, the image formed is located 8.0 cm from the lens and has a height of 1.6 times that of the object, making it 4.48 cm in height.

In this scenario, an object with a height of 2.8 cm is positioned 5.0 cm in front of a converging lens with a focal length of 20 cm. To determine the location and size of the image formed by the lens, we can use the lens formula and magnification formula.

The lens formula states that 1/f = 1/v - 1/u, where f is the focal length, v is the image distance, and u is the object distance. Substituting the given values into the lens formula, we find:

1/20 = 1/v - 1/(-5.0)

Simplifying this equation yields:

1/v = 1/20 + 1/5.0

Solving for v, we obtain:

v = 8.0 cm

The positive value indicates that the image is formed on the opposite side of the lens. The magnification formula, M = -v/u, allows us to calculate the magnification of the image:

M = -8.0/-5.0 = 1.6

To learn more about height :

https://brainly.com/question/28990670

#SPJ11

The probability that John selected a red marble on the first draw and then selected red again on the second draw is 1/9.

To calculate the probability of John selecting a red marble and then selecting red again, we need to determine the probability of each event separately and then multiply them together.

The probability of selecting a red marble on the first draw is the number of red marbles divided by the total number of marbles:

P(Red on first draw) = 4 / (8 + 4) = 4 / 12 = 1/3

Since John replaced the marble back into the bag before the second draw, the probability of selecting a red marble on the second draw is also 1/3.

To find the probability of both events happening together (independent events), we multiply the probabilities:

P(Red on first draw and Red on second draw) = P(Red on first draw) × P(Red on second draw)

= (1/3) × (1/3)

= 1/9

Therefore, the probability that John selected a red marble on the first draw and then selected red again on the second draw is 1/9.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

Based on the proof, the set {c1v1, c2v2} is also an orthogonal set.

It should be noted that to show that {c1v1, c2v2} is an orthogonal set, we need to show that their dot product is zero, i.e.,

(c1v1)⋅(c2v2) = 0

Expanding the dot product using the distributive property, we get:

(c1v1)⋅(c2v2) = c1c2(v1⋅v2)

Since {v1, v2} is an orthogonal set, their dot product is zero, i.e.,

v1⋅v2 = 0

Substituting this in the above equation, we get:

(c1v1)⋅(c2v2) = c1c2(v1⋅v2) = c1c2(0) = 0

Therefore, the set {c1v1, c2v2} is also an orthogonal set.

Leaen more about orthogonal on

https://brainly.com/question/30772550

#SPJ1

The critical values zα or z/2α are the boundary values for the rejection region(s) in hypothesis testing. The correct answer is D. 0.04, as it is the only value less than 0.05.

These values are determined based on the level of significance (α), which represents the probability of making a Type I error (rejecting a true null hypothesis).
In other words, if the calculated test statistic falls outside of the rejection region(s) defined by the critical values, we reject the null hypothesis at the given level of significance.
Therefore, for the second question, if we reject the null hypothesis at the 0.05 level of significance, we would also reject it for α values less than 0.05.

Thus, the correct answer is D. 0.04, as it is the only value less than 0.05.

Read more about critical values.

https://brainly.com/question/30168469

#SPJ11

Answer:

Yes

Step-by-step explanation:

Sure, this survey result could be correct. (2/3) x 24 = 16 students that said that they liked rap. This is a whole number, so sure, his survey result it possible.

(If he said that, for example, 1/11 of the class liked rap and there were 24 students, (1/11) x 24 = 2.18, and you can't have a fraction of a person for this type of survey result, so that wouldn't be a valid survey result!)

The piecewise function to represent the amount A Sam owes after m months is A ( m ) = { 1500 - 50 m, if 0 ≤ m ≤ 12

{ 1500 - 50 (12) - 75 (m - 12), if m > 12

For the initial twelve months (0 ≤ m ≤ 12), Sam pays a monthly installment of $50. As a result, his remaining debt after m months will be equal to the starting loan amount ($ 1500) reduced by the cumulative total that he had paid back during said year ($50 x m).

Beyond the first year (m > 12), Sam is liable for a payment of $75 each month. Having already satisfied the former fee of $50 per month over the course of a full calendar year, his indebtedness afterwards becomes the remaining balance post-first year ( $1500 - 50 ( 12 )) decreased by his collective cost at $75 per month since then ( $75 x ( m - 12 )).

The piecewise function is therefore:

A ( m ) = { 1500 - 50 m, if 0 ≤ m ≤ 12

{ 1500 - 50 (12) - 75 (m - 12), if m > 12

Find out more on piecewise functions at https://brainly.com/question/28610599

#SPJ1

Answer:

152 miles away

Step-by-step explanation:

i dont have an explanation srry

The variance of the distribution of the data set is 0.596.

To find the variance of a discrete probability distribution, we use the formula:

Var(X) = ∑[x - E(X)]² p(x),

where E(X) is the expected value of X, which is equal to the mean of the distribution, and p(x) is the probability of X taking the value x.

We can first find the expected value of X:

E(X) = ∑x . p(x)

= 0 (0.130) + 1 (0.346) + 2 (0.346) + 3 (0.154) + 4 (0.024)

= 1.596

Next, we can calculate the variance:

Var(X) = ∑[x - E(X)]² × p(x)

= (0 - 1.54)² × 0.130 + (1 - 1.54)² ×  0.346 + (2 - 1.54)² × 0.346 + (3 - 1.54)² ×  0.154 + (4 - 1.54)² × 0.024

= 0.95592

Therefore, the variance of the distribution is 0.96.

To learn more about the variance;

https://brainly.com/question/16686665

#SPJ1

Using the power series expansion of cos(x) to find the sum of this series. Recall that:

cos(x) = ∑[n=0, ∞] (-1)^n (x^(2n)) / (2n)!

Comparing the given series to the power series expansion of cos(x), we have:

(-1)^n 2^(2n) / (2n)! = (-1)^n 42^n (2n)! / (2n)!

Therefore, cos(x) = ∑[n=0, ∞] (-1)^n (x^(2n)) / (2n)! = ∑[n=0, ∞] (-1)^n 2^(2n) / (2n)! = ∑[n=0, ∞] (-1)^n 42^n (2n)! / (2n)!

Setting x = 4 in the power series expansion of cos(x), we get:

cos(4) = ∑[n=0, ∞] (-1)^n (4^(2n)) / (2n)! = ∑[n=0, ∞] (-1)^n 2^(2n) / (2n)!

Therefore, the sum of the given series is cos(4) / 42 = cos(4) / 1764.

Hence, the sum of the series is cos(4) / 1764.

To know more about the series refer here

https://brainly.com/question/12198123

SPJ11

The researcher needs at least 67 participants in the sample size to adequately conduct a study to estimate the population mean to within 5 points at a 90% level of confidence. The sample size is an essential part of any research study. The sample size is the number of participants or observations in the study.

To estimate the sample size, we should use the following formula:

N = (Z² * s²) / E²

Where: N = Sample Size, Z = Z-score (z-score for a 90% confidence level is 1.645), s = Standard deviation, E = Margin of error (We have 5 points or 0.05 in decimal form)

Now, we will calculate the Standard deviation which is the square root of the variance. The variance is obtained by dividing the population range by 4. It's 80/4 = 20s = √20 = 4.47

Plugging in these values to the above formula: N = (1.645² * 4.47²) / 0.05²

N = 66.7 ≈ 67

Therefore, the researcher needs at least 67 participants in the sample size to adequately conduct a study to estimate the population mean to within 5 points at a 90% level of confidence. The sample size is an essential part of any research study. The sample size is the number of participants or observations in the study. A sample is taken from the population because it's usually impossible to collect data from the entire population. The sample size must be adequately determined to produce accurate results and avoid errors that may affect the study's validity. A larger sample size is more representative of the population, and it minimizes the effect of random errors. However, a sample that is too large can lead to waste of resources, time, and money. Therefore, researchers determine the sample size required based on various factors, including the population's size, variability of the data, the level of confidence desired, and the margin of error. The formula for calculating the sample size is N = (Z² * s²) / E², where N is the sample size, Z is the Z-score, s is the standard deviation, and E is the margin of error.

To know more about variance visit:

https://brainly.com/question/31432390

#SPJ11

The general solution of the system of differential equations is:

x1 = X1t + X2t + C1

x2 = [tex](1/5)Ce^t - (4/5)X1[/tex]

X1, X2, C1, and C are arbitrary constants.

System of differential equations:

x1' = X1 + X2

x2 = 4x1 + x2

To decouple this system, we first solve for x1' in terms of X1 and X2:

x1' = X1 + X2

Next, we differentiate the second equation with respect to time t:

x2' = 4x1' + x2'

Substituting x1' = X1 + X2, we get:

x2' = 4(X1 + X2) + x2'

Rearranging this equation, we get:

x2' - x2 = 4X1 + 4X2

This is a first-order linear differential equation.

To solve for x2, we first find the integrating factor:

μ(t) = [tex]e^{(-t)[/tex]

Multiplying both sides of the equation by μ(t), we get:

[tex]e^{(-t)}x2' - e^{(-t)}x2 = 4e^{(-t)}X1 + 4e^{(-t)}X2[/tex]

Applying the product rule of differentiation to the left side, we get:

[tex](d/dt)(e^{(-t)}x2) = 4e^{(-t)}X1 + 4e^{(-t)}X2[/tex]

Integrating both sides with respect to t, we get:

[tex]e^{(-t)}x2 = -4X1e^{(-t)} - 4X2e^{(-t)} + C[/tex]

where C is an arbitrary constant of integration.

Solving for x2, we get:

[tex]x2 = Ce^t - 4X1 - 4X2[/tex]

Now, we have two decoupled differential equations:

x1' = X1 + X2

[tex]x2 = Ce^t - 4X1 - 4X2[/tex]

To find the general solution, we first solve for x1:

x1' = X1 + X2

=> x1 = ∫(X1 + X2)dt

=> x1 = X1t + X2t + C1

where C1 is an arbitrary constant of integration.

Substituting x1 into the equation for x2, we get:

x2 = [tex]Ce^t[/tex]- 4X1 - 4X2

=> x2 + 4x2 = [tex]Ce^t[/tex]- 4X1

=> 5x2 = [tex]Ce^t - 4X1[/tex]

=> x2 =[tex](1/5)Ce^t - (4/5)X1[/tex]

Absorbed the constant -4X1 into the constant C.

For similar questions on system of differential

https://brainly.com/question/31383370

#SPJ11

The general solution of the given system of differential equations is:

x1 = c1cos((sqrt(23)/8)t) + c2sin((sqrt(23)/8)t) + (3/4)c3

x2 = (3/2)c1sin((sqrt(23)/8)t) - (3/2)c2cos((sqrt(23)/8)t) + 4c3

The given system of differential equations is:

x;' = X1 + X2

x2 = 4x1 + x2

To decouple the system, we need to eliminate one of the variables from the first equation. We can do this by rearranging the second equation as:

x1 = (x2 - x2)/4

Substituting this in the first equation, we get:

x;' = X1 + X2

= (x2 - x1)/4 + x2

= (3/4)x2 - (1/4)x1

Now, we can write the system as:

x;' = (3/4)x2 - (1/4)x1

x2 = 4x1 + x2

To solve this system, we can use the standard method of finding the characteristic equation:

| λ - (3/4) 1/4 |

| -4 1 |

Expanding along the first row, we get:

λ(λ-3/4) - 1/4(-4) = 0

λ^2 - (3/4)λ + 1 = 0

Solving for λ using the quadratic formula, we get:

λ = (3/8) ± (sqrt(9/64 - 1))/8

λ = (3/8) ± (sqrt(23)/8)i

Therefore, the general solution of the system is:

x1 = c1cos((sqrt(23)/8)t) + c2sin((sqrt(23)/8)t) + (3/4)c3

x2 = (3/2)c1sin((sqrt(23)/8)t) - (3/2)c2cos((sqrt(23)/8)t) + 4c3

where c1, c2, and c3 are constants determined by the initial conditions.

To learn more about differential equations, click here: https://brainly.com/question/25731911

#SPJ11

The given equation is 10x - 12 + 6 = 2(x + 5). We will solve the given equation to find the value of x. We will use the following steps:Step 1: Combine the constants on the left-hand side (LHS) of the equation.

10x - 12 + 6 = 2(x + 5)10x - 6 = 2(x + 5)Step 2: Distribute the coefficient of x on the right-hand side (RHS).10x - 6 = 2x + 10Step 3: Subtract 2x from both sides of the equation.10x - 2x - 6 = 10Step 4: Simplify the left-hand side (LHS).8x - 6 = 10Step 5: Add 6 to both sides of the equation.8x - 6 + 6 = 10 + 6Step 6: Simplify both sides of the equation.8x = 16Step 7: Divide both sides of the equation by 8.8x/8 = 16/8x = 2Hence, the value of x is 2.

To know more about  left-hand side visit:

brainly.com/question/21406564

#SPJ11