The answer is when 0.062 g of matter is converted to energy, the amount of energy produced can be calculated using Einstein's famous equation E=mc².
This equation states that energy (E) is equal to the mass (m) of an object multiplied by the speed of light (c) squared. The speed of light is a constant value of approximately 299,792,458 meters per second.
So, to calculate the amount of energy produced when 0.062 g of matter is converted to energy, we need to first convert the mass from grams to kilograms, since the speed of light is given in meters per second. Therefore, 0.062 g is equal to 0.000062 kg.
Next, we can plug this value into the equation E=mc² and solve for E.
E = (0.000062 kg) x (299,792,458 m/s)²
E = 5.566 x 10¹² joules
Therefore, when 0.062 g of matter is converted to energy, approximately 5.566 x 10¹² joules of energy are produced.
Einstein's equation shows that mass and energy are equivalent and interchangeable, with the speed of light serving as a conversion factor between the two. This means that even small amounts of mass can produce large amounts of energy if they are converted through a process such as nuclear fusion or fission.
In this case, 0.062 g of matter is a relatively small amount, but when converted to energy through the process of nuclear fusion or fission, it can produce a significant amount of energy - in this case, over 5 trillion joules. This amount of energy is equivalent to the energy produced by the detonation of a large conventional bomb or the energy consumed by several thousand households over the course of a year.
Overall, the calculation highlights the immense power that can be harnessed through the conversion of matter to energy, and the potential benefits and risks associated with this process.
To know more about Einstein's equation visit:
brainly.com/question/30404143
#SPJ11
Classify each of the following alkenes as monosubstituted, disubstituted, trisubstituted, or tetrasubstituted:specifically, WHY molecule C (1,2,2-trimethyl-propene)is either disubstituted or trisubstituted.. same with molecule D. I think molecule C is di, but my friend says tri..I want to know what the reasoning is.
Molecule C is trisubstituted and molecule D is disubstituted.
How do you classify alkenes based on the number of substituents, and why is 1,2,2-trimethylpropene considered trisubstituted while 3-ethyl-1-butene is disubstituted?The classification of alkenes as monosubstituted, disubstituted, trisubstituted, or tetrasubstituted is based on the number of substituents (groups of atoms) attached to each of the carbon atoms in the double bond.
- Monosubstituted alkenes have one substituent attached to each of the carbon atoms in the double bond.
- Disubstituted alkenes have two substituents attached to one of the carbon atoms in the double bond and one substituent attached to the other carbon atom.
- Trisubstituted alkenes have three substituents attached to one of the carbon atoms in the double bond and two substituents attached to the other carbon atom.
- Tetrasubstituted alkenes have four substituents attached to each of the carbon atoms in the double bond.
Molecule C, 1,2,2-trimethylpropene, has three substituents attached to one of the carbon atoms in the double bond (two methyl groups and one tertiary butyl group) and one substituent attached to the other carbon atom (a hydrogen atom). Therefore, it is a trisubstituted alkene.
Molecule D, 3-ethyl-1-butene, has two substituents attached to one of the carbon atoms in the double bond (an ethyl group and a hydrogen atom) and two substituents attached to the other carbon atom (a methyl group and a hydrogen atom). Therefore, it is a disubstituted alkene.
The reason why molecule C is trisubstituted and not disubstituted is that the presence of a tertiary butyl group as a substituent increases the bulkiness of the molecule and decreases the degree of unsaturation of the double bond.
In other words, the tertiary butyl group occupies more space around the double bond and reduces the number of available positions for additional substituents.
Therefore, even though there are only two substituents directly attached to the carbon atom on one side of the double bond, the presence of the tertiary butyl group makes it a trisubstituted alkene.
Learn more about Molecule
brainly.com/question/19922822
#SPJ11
Which of the following conditions at the A-V node will
cause a decrease in heart rate?
A) Increased sodium permeability
B) Decreased acetylcholine levels
C) Increased norepinephrine levels
D) Increased potassium permeability
E) Increased calcium permeability
Match the magnitude of the equilibrium constant Kc with the correct description of the reaction system.
small Kc =
intermediate Kc =
large Kc =
The magnitude of the equilibrium constant Kc determines the direction and extent of a reaction.
How does the magnitude of Kc affect the direction and extent of a reaction?The equilibrium constant, denoted as Kc, is a numerical value that relates the concentrations of reactants and products at equilibrium in a chemical reaction. It is calculated using the concentrations of the species involved in the reaction. The magnitude of Kc indicates the relative abundance of products compared to reactants at equilibrium.
A small Kc value indicates that the concentration of products is low compared to reactants, suggesting that the reaction system predominantly favors the reactants. This means that the reaction proceeds more in the backward direction.
Conversely, a large Kc value suggests that the concentration of products is high compared to reactants, indicating that the reaction system predominantly favors the products. This implies that the reaction proceeds more in the forward direction.
An intermediate Kc value indicates that the reaction system is balanced, with comparable concentrations of products and reactants. This suggests that the reaction is proceeding in both the forward and backward directions to a significant extent.
the magnitude of Kc provides important information about the direction and extent of a reaction. It helps determine whether a reaction predominantly favors the reactants, products, or is in a balanced state at equilibrium.
Learn more about Equilibrium constants
brainly.com/question/19669218
#SPJ11
Modern drug discovery often starts with a large library of compounds. These library studies are important because a. Select one: cancerous tissue is much more difficult to target than foreign invaders. b. the search will definitely yield a new candidate drug. c. the search may yield a number of possible framework pieces to build into a good drug. d. old drugs will never be effective against new targets.
The answer to the question is c. The library studies may yield a number of possible framework pieces to build into a good drug.
Modern drug discovery is a complex and time-consuming process that involves screening large libraries of compounds to identify potential candidates for further development. While the ultimate goal is to find a new drug that is effective against a specific disease or condition, it is often the case that the initial screening process yields multiple compounds that may be useful in developing a new drug.
This process is essential for addressing evolving health challenges and improving therapeutic options. While not every search guarantees a new candidate drug, the possibility of finding multiple framework pieces makes these studies valuable in drug discovery.
Learn more about drug here:
https://brainly.com/question/29767316
#SPJ11
given 1 amp of current for 1 hour, which solution would deposit the smallest mass of metal?
The solution with Cu in CuSO₄ would deposit the smallest mass of metal. Thus the correct answer to the question is C.
The weight of the metal deposited is given by
W = E i t / 96500
where E is the Equivalent mass
i is the current
t is the time
Since the current and time is constant, thus,
W ∝ equivalent mass
The equivalent mass of Fe in FeCl₂ is 56 /2 which is 28 g
The equivalent mass of Ni found in NiCl₂ (aq) is 59 /2 which is 29.5 g
The equivalent mass of Cu found in CuSO₄ (aq) is 63.5 /4 which is 15.875 g
The equivalent mass of Ag found in AgNO₃ (aq) is 108 /1 which is 108 g
Thus, the equivalent mass of Cu is the least so this solution would deposit the smallest mass of metal.
Learn more about Equivalent mass:
https://brainly.com/question/31046806
#SPJ1
The complete question is:
Given 1 amp of current for an hour, which of these solutions would deposit the smallest amount (mass) of metal?
a) Fe found in FeCl₂ (aq)
b) Ni found in NiCl₂ (aq)
c) Cu found in CuSO₄ (aq)
d) Ag found in AgNO₃ (aq)
Describe at least three major, diagnostic spectral differences you'd expect between a^1H NMR spectrum of "B" versus that of "C". (Example: which would have more signals?)
Based on the given information, the major, diagnostic spectral differences between the ^1H NMR spectrum of "B" and "C" could be Number of signals, Chemical shift and Splitting pattern.
1) Number of signals: "B" is a symmetric molecule, which means it has a plane of symmetry that divides it into two identical halves. Therefore, its ^1H NMR spectrum is expected to have fewer signals (or peaks) compared to "C", which is an asymmetric molecule. "C" has different types of hydrogen atoms due to its asymmetric structure, which would give rise to more signals in its ^1H NMR spectrum.
2) Chemical shift: The chemical shift is a measure of the magnetic environment experienced by a proton. In "B", all the hydrogen atoms are chemically equivalent, and hence they would experience the same magnetic environment, leading to a single chemical shift in its ^1H NMR spectrum. However, in "C", the hydrogen atoms are not equivalent, and hence they would experience different magnetic environments, resulting in different chemical shifts in its ^1H NMR spectrum.
3) Splitting pattern: The splitting pattern in a ^1H NMR spectrum depends on the number of neighboring hydrogen atoms. In "B", there are no neighboring hydrogen atoms, and hence the signals in its ^1H NMR spectrum would not be split. However, in "C", some of the hydrogen atoms are adjacent to other hydrogen atoms, leading to splitting of the signals in its ^1H NMR spectrum. The splitting pattern would depend on the number of neighboring hydrogen atoms and their relative positions in the molecule.
Learn more about NMR Spectrum: https://brainly.com/question/29885193
#SPJ11
Hi! I'd be happy to help you identify three major diagnostic spectral differences between a ^1H NMR spectrum of compound "B" versus that of "C."
1. Number of Signals: One compound may have more signals than the other, indicating a difference in the number of chemically distinct hydrogen atoms. For example, compound "B" might have more unique hydrogen environments, resulting in a higher number of signals in its ^1H NMR spectrum compared to compound "C."
2. Chemical Shifts: The chemical shifts of the signals can vary between the two compounds due to differences in their molecular structures and the electronic environments surrounding the hydrogen atoms. Compound "B" may have hydrogen atoms in more electronegative environments, leading to downfield (higher ppm) chemical shifts, whereas compound "C" might have hydrogen atoms in less electronegative environments, resulting in upfield (lower ppm) chemical shifts.
3. Coupling Constants (J-coupling): The coupling constants between hydrogen atoms in compound "B" and "C" might differ due to variations in their molecular structures and the nature of the neighboring hydrogen atoms. This can result in different splitting patterns for the signals in their respective ^1H NMR spectra. For example, compound "B" might display doublets or triplets, whereas compound "C" could exhibit more complex splitting patterns such as quartets or quintets.
determine the nuclear binding energy in j/mol of an o-16 nucleus given the following data: mass of o-16 15.9905 amu mass of proton 1.00728 amu mass of neutron 1.008665 amu
The nuclear binding energy of an o-16 nucleus is approximately [tex]4.04 \times 10^{12[/tex] joules per mole.
The nuclear binding energy (BE) of a nucleus is the amount of energy required to break apart the nucleus into its constituent protons and neutrons. The BE can be calculated using the mass defect, which is the difference between the mass of the nucleus and the sum of the masses of its constituent particles.
The mass of an o-16 nucleus is given as 15.9905 atomic mass units (amu). The nucleus consists of eight protons and eight neutrons, with each proton having a mass of 1.00728 amu and each neutron having a mass of 1.008665 amu. Therefore, the total mass of the protons and neutrons in the o-16 nucleus is:
8 protons x 1.00728 amu/proton + 8 neutrons x 1.008665 amu/neutron = 15.99503 amu
The mass defect of the o-16 nucleus is:
15.99503 amu - 15.9905 amu = 0.00453 amu
The mass defect is related to the BE by Einstein's famous equation [tex]E = mc^2[/tex], where E is the energy, m is the mass defect, and c is the speed of light. To convert the mass defect from amu to kg, we use the conversion factor [tex]1.66054 \times 10^{-27[/tex] kg/amu. Thus, the mass defect of the o-16 nucleus is:
[tex]$0.00453 \text{ amu} \times 1.66054\times 10^{-27}\text{ kg/amu}=7.52\times 10^{-29}\text{ kg}$[/tex]
The energy equivalent of the mass defect is given by:
[tex]$E = (7.52 \times 10^{-29}\text{ kg}) \times (299792458\text{ m/s})^2 = 6.72\times 10^{-12}\text{ J}$[/tex]
To convert this energy into joules per mole, we need to multiply it by Avogadro's number ([tex]6.022 \times 10^{23[/tex]). Thus, the nuclear binding energy of the o-16 nucleus is:
[tex]$6.72\times 10^{-12}\text{ J} \times 6.022 \times 10^{23}=4.05\times 10^{12}\text{ J/mol}$[/tex]
= [tex]4.04 \times 10^{12[/tex] J/mol
To learn more about nuclear binding energy
https://brainly.com/question/31806442
#SPJ4
.A gas in an environment has a volume of 16.8 L and a pressure of 3.2 atm. If the volume changes to 10.6 L, what will the new pressure be?
5.07 atm
2.02 Pa
5.07 L
2.02 atm
The new pressure of the gas when the volume changes to 10.6 L is 5.07 atm, which is option A.
According to Boyle's law, the pressure and volume of a gas are inversely proportional at constant temperature. This means that if the volume of a gas is reduced, its pressure will increase proportionally, and vice versa. The mathematical relationship between pressure and volume can be expressed as:
P1V1 = P2V2
where P1 and V1 are the initial pressure and volume, respectively, and P2 and V2 are the final pressure and volume, respectively.
Using this equation, we can find the final pressure of the gas:
P2 = (P1V1) / V2
P2 = (3.2 atm x 16.8 L) / 10.6 L
P2 = 5.07 atm
For more question on volume click on
https://brainly.com/question/27100414
#SPJ11
A label states 1 mil contains 500 mg. how many mils if there are 1.5 grams?
To get 1.5 grams (1500 mg) of the substance, you would need 3 milliliters (mL) since 1 milliliter (mL) contains 500 milligrams (mg).
To solve this problem, first, convert 1.5 grams to milligrams. Since there are 1000 milligrams in 1 gram, multiply 1.5 grams by 1000, which equals 1500 milligrams.
Now, the label states that 1 milliliter contains 500 milligrams of the substance.
To find out how many milliliters are needed to get 1500 milligrams, divide the total amount of milligrams (1500 mg) by the amount of milligrams in 1 milliliter (500 mg).
So, the calculation is 1500 mg / 500 mg/mL = 3 mL. Therefore, you would need 3 milliliters to obtain 1.5 grams (1500 mg) of the substance.
Learn more about milligrams here:
https://brainly.com/question/29271037
#SPJ11
Standards Standard retention time of dichloromethane solvent: 2.31 min Standard retention time of toluene: 12.17 min Standard retention time of cyclohexene: 5.74 min. (0.25pts) Standard retention time of dichloromethane solvent (min) (0.25pts) Standard etention time of toluene (min) (0.25pts) Standard retention time of cyclohexane (min) .
The given information provides standard retention times for three compounds: dichloromethane solvent, toluene, and cyclohexene, which are used for identifying these compounds in gas chromatography analysis. The retention time is the time taken for a compound to travel through the chromatography column and reach the detector.
The standard retention time for dichloromethane solvent is 2.31 min, while the standard retention time for toluene is 12.17 min. The standard retention time for cyclohexene is 5.74 min.
These standard retention times can be used to identify these compounds in a gas chromatography (GC) analysis. In GC, the retention time is the time taken for a particular compound to travel through the chromatography column and reach the detector.
By comparing the retention times of unknown compounds with the standard retention times of known compounds, we can identify the unknown compounds. Therefore, the given standard retention times are important for the identification of these compounds in GC analysis.
To know more about the standard retention refer here :
https://brainly.com/question/29442385#
#SPJ11
Calculate the specific heat ( in joules/ g. °C) if 2927 joules requiresd to raise the temperature of 55.9 grams of unknown metal from 27 °C to 95 Oc. Heat = mass XS.HXAT 0.42 0.077 O 0.77 0.39
The specific heat of the unknown metal is 0.42 J/g.°C, calculated by dividing the heat (2927 J) by the mass (55.9 g) and the temperature change.
How to calculate specific heat of unknown metal?To calculate the specific heat of the unknown metal, we can use the formula:
q = m * c * ∆T
where q is the amount of heat transferred, m is the mass of the metal, c is the specific heat of the metal, and ∆T is the change in temperature.
We are given that:
q = 2927 J
m = 55.9 g
∆T = 95°C - 27°C = 68°C
Substituting these values into the formula, we get:
2927 J = (55.9 g) * c * 68°C
Simplifying:
c = 2927 J / (55.9 g * 68°C)
c = 0.420 J/(g·°C)
Therefore, the specific heat of the unknown metal is 0.420 joules per gram per degree Celsius (J/g·°C).
Learn more about specific heat
brainly.com/question/13110575
#SPJ11
in sih4, could d orbitals be used to form the bonds? if so, which d orbitals?
In SiH4, the bonding occurs through the overlap of the hybridized orbitals of silicon and the 1s orbitals of hydrogen. The hybridization of the silicon atom in SiH4 is sp3, meaning that it has four hybrid orbitals. These hybrid orbitals are formed by the mixing of one 3s and three 3p orbitals of silicon.
The d orbitals of silicon are not involved in the bonding in SiH4. This is because the energy of the d orbitals is higher than that of the hybridized orbitals, and thus, they are not available for bonding. Additionally, the size of the silicon atom is such that the 3s and 3p orbitals are the ones that best overlap with the hydrogen 1s orbitals to form the sigma bonds.
In summary, the bonding in SiH4 occurs through the hybridization of the 3s and 3p orbitals of silicon, which form four sp3 hybrid orbitals. The d orbitals are not involved in bonding because their energy is higher than that of the hybridized orbitals.
In SiH4, the central atom is silicon, which is in the third period of the periodic table. Silicon has an electron configuration of [Ne] 3s² 3p², meaning it has access to the 3s and 3p orbitals for bonding. SiH4 forms four single bonds with hydrogen atoms in a tetrahedral structure. These bonds involve the overlap of silicon's 3s and 3p orbitals with the 1s orbitals of the hydrogen atoms.
D orbitals are not involved in the bonding of SiH4. Silicon does have empty 3d orbitals, but they do not participate in bonding as the energy difference between 3d and 3s/3p orbitals is significant. The 3s and 3p orbitals of silicon are sufficient to accommodate the four bonding electron pairs with hydrogen atoms, making the use of d orbitals unnecessary in SiH4.
To know more about silicon visit:
https://brainly.com/question/14505564
#SPJ11
Refer to the reactions represented below; which are involved in a demonstration commonly known as 'underwater fireworks_ Reaction 1: CaCz(s) + 2 HzO() _ CzHzlg) + Ca(OH)z(s) Reaction 2: NaOCllaq) + 2 HCI(aq) ~ Clzlg) NaCl(aq) HzO() Reaction 3: CzHz(g) Clz(g) CzHzClz(g) When Reaction 3 occurs, does the hybridization of the carbon atoms change? Yes; it changes from sp to sp2 Yes; it changes from sp to sp3 No; it does not change: Yes; it changes from sp2 to sp
Yes; it changes from sp3 to sp2".The reactions represented above are not involved in a demonstration commonly known as 'underwater fireworks'.
Instead, they are related to the formation of different chemical compounds. In the first reaction, calcium carbide and water react to form acetylene gas and calcium hydroxide.
The second reaction involves the reaction between sodium hypochlorite and hydrochloric acid to produce chlorine gas, sodium chloride, and water.
The third reaction shows the formation of chloroform from methane and chlorine gas. When this reaction occurs, the hybridization of the carbon atoms changes from sp3 to sp2. "Yes; it changes from sp3 to sp2".
To know more about hybridization visit:
brainly.com/question/14140731
#SPJ11
A solution is made by dissolving 45.5 g of Ba(NO₂)₂ in 500.0 mL of water. Using Kb(NO₂⁻) = 2.2 × 10⁻¹¹, determine the pH of the solution.
The pH of the solution is approximately 8.74.
Ba(NO₂)₂ dissociates in water to produce Ba²⁺ and 2 NO₂⁻ ions. The NO₂⁻ ion can act as a weak base and undergo hydrolysis to produce OH⁻ ions:
NO₂⁻ + H₂O ⇌ HNO₂ + OH⁻
The equilibrium constant for this reaction is given by Kb(NO₂⁻) = [HNO₂][OH⁻] / [NO₂⁻]. We are given the mass of Ba(NO₂)₂ and the volume of water, so we can calculate the molarity of the solution: moles of Ba(NO₂)₂ = 45.5 g / 167.327 g/mol = 0.272 mol
Molarity = 0.272 mol / 0.500 L = 0.544 M
Since each Ba(NO₂)₂ molecule produces 2 NO₂⁻ ions, the initial concentration of NO₂⁻ is twice the molarity of Ba(NO₂)₂:
[NO₂⁻]i = 2 * 0.544 M = 1.088 M
At equilibrium, some of the NO₂⁻ ions will have reacted with water to form HNO₂ and OH⁻ ions. Let x be the concentration of OH⁻ ions produced by the hydrolysis of NO₂⁻. Then the concentration of HNO₂ is also x, and the concentration of NO₂⁻ remaining is [NO₂⁻]i - x.
The equilibrium constant expression for the hydrolysis reaction can be written as: Kb = [HNO₂][OH⁻] / [NO₂⁻] = x² / ([NO₂⁻]i - x)
Substituting the given values, we get: 2.2 × 10⁻¹¹ = x² / (1.088 - x). Solving for x using the quadratic formula, we get: x = 5.45 × 10⁻⁶ M
The concentration of OH⁻ ions is 5.45 × 10⁻⁶ M, so the pOH of the solution is: pOH = -log(5.45 × 10⁻⁶) = 5.26. Since pH + pOH = 14, the pH of the solution is: pH = 14 - pOH = 8.74
Therefore, the pH of the solution is approximately 8.74.
Know more about hydrolysis here
https://brainly.com/question/12237250#
#SPJ11
if the combustion of 59.10 g of c4h10 produces 99.71 g of co2. what is the percent yield of the reaction? (assume oxygen is in excess.)
The percent yield of the combustion reaction is 55.70%.
To calculate the percent yield of the reaction, you'll first need to determine the theoretical yield and then compare it to the actual yield.
1. Calculate the molar mass of C₄H₁₀ (butane) and CO₂:
C₄H₁₀: (4 x 12.01) + (10 x 1.01) = 58.12 g/mol
CO₂: (1 x 12.01) + (2 x 16.00) = 44.01 g/mol
2. Calculate the moles of C₄H₁₀:
59.10 g C₄H₁₀ * (1 mol C₄H₁₀ / 58.12 g) = 1.017 mol C₄H₁₀
3. Use the balanced equation to determine the moles of CO₂ produced theoretically:
C₄H₁₀ + 13/2 O₂ -> 4 CO₂ + 5 H₂O
1.017 mol C₄H₁₀ * (4 mol CO₂ / 1 mol C₄H₁₀) = 4.068 mol CO₂
4. Calculate the theoretical yield of CO₂:
4.068 mol CO₂ * (44.01 g / 1 mol CO₂) = 179.03 g CO₂
5. Determine the percent yield:
Percent yield = (Actual yield / Theoretical yield) x 100
Percent yield = (99.71 g CO₂ / 179.03 g CO₂) x 100 = 55.70%
So, the percent yield of the reaction is 55.70%.
Learn more about percent yield here: https://brainly.com/question/25996347
#SPJ11
how many sigma and pi bonds are in 2-butyne (ch3c≡cch3)?
In 2-butyne (CH3C≡CCH3), there are a total of 3 sigma bonds and 2 pi bonds. Sigma bonds are formed by head-on overlap of atomic orbitals, while pi bonds are formed by side-by-side overlap of atomic orbitals.
The carbon-carbon triple bond in 2-butyne consists of one sigma bond and two pi bonds. This is because the triple bond consists of two parallel p orbitals that overlap sideways to form two pi bonds, and a sigma bond is formed between the carbon atoms by overlap of sp hybrid orbitals.
Each carbon atom in the triple bond is also bonded to two other atoms (hydrogen atoms in this case) through sigma bonds, which brings the total number of sigma bonds to 3.
In summary, 2-butyne has one sigma bond and two pi bonds in its carbon-carbon triple bond, and two sigma bonds in each carbon-hydrogen bond, giving a total of 3 sigma bonds and 2 pi bonds.
For more question on atomic orbitals
https://brainly.com/question/11457131
#SPJ11
In 2-butyne (CH3C≡CCH3), there are a total of 9 bonds. Among these, there are 3 sigma bonds and 2 pi bonds. The sigma bonds are between the carbon atoms and their respective hydrogen atoms, while the pi bonds are between the two carbon atoms in the triple bond.
Learn more about atoms click here
https://brainly.com/question/1566330
#SPJ11
The ph of a 0.77m solution of 4-pyridinecarboxylic acid hc6h4no2 is measured to be 2.54. Calculate the acid dissociation constant Ka of 4-pyridinecarboxlic acid. Round your answer to 2 significant digits
The acid dissociation constant (Ka) of 4-pyridinecarboxylic acid is approximately 3.1, rounded to 2 significant digits.
To calculate the acid dissociation constant (Ka) of 4-pyridinecarboxylic acid (HC₆H₄NO₂), we can use the pH value and the concentration of the acid.
The pH of a solution is related to the concentration of hydronium ions (H₃O⁺) in the solution. In this case, the pH of the solution is given as 2.54, indicating the concentration of H₃O⁺ ions.
To find the concentration of H₃O⁺ ions, we need to convert the pH to a molar concentration of H₃O⁺ using the formula:
[H₃O⁺] = [tex]10^(^-^p^H^)[/tex]
[H₃O⁺] = [tex]10^(^-^2^.^5^4^)[/tex]
Now, since the acid is a monoprotic acid and fully dissociates, the concentration of the acid (HC₆H₄NO₂) is equal to the concentration of H₃O⁺ ions.
Therefore, the concentration of the acid is 10^(-2.54) M.
The general equation for the dissociation of a weak acid, HA, is:
HA ⇌ H⁺ + A⁻
Where HA represents the acid, H⁺ represents the hydronium ion, and A⁻ represents the conjugate base.
The acid dissociation constant (Ka) is given by the expression:
Ka = [H⁺] * [A⁻] / [HA]
Since the concentration of the acid is equal to the concentration of H⁺, and assuming complete dissociation, the equation simplifies to:
Ka = [H⁺]² / [HA]
Ka = ([H₃O⁺]²) / [HC₆H₄NO₂]
Ka = [tex](10^(^-^2^.^5^4^))^2[/tex] / 0.77
Ka = [tex]10^(^-^2^.^5^4^*^2^)[/tex] / 0.77
Ka ≈ 2.4 / 0.77
Ka ≈ 3.1
Learn more about The acid dissociation constant (Ka): https://brainly.com/question/9560811
#SPJ11
Indicate whether solutions of each of the following substance contain ions, molecules, or both (do not consider the solvent, water):
a) hydrochloric acid, a strong acid
b) sodium citrate, a soluble salt
c) acetic acid, a weak acid
d) ethanol, a nonelectrolyte
The substances hydrochloric acid, a strong acid contains ions, Sodium citrate, a soluble salt contains ions, Acetic acid, a weak acid contains both ions and molecules, Ethanol, a nonelectrolyte contains only molecules.
Hydrochloric acid, a strong acid, ionizes completely in water to form H⁺ and Cl⁻ ions. So, the solution of hydrochloric acid contains ions.
Sodium citrate, a soluble salt, dissociates into Na⁺ and citrate ions in water. So, the solution of sodium citrate contains ions.
Acetic acid, a weak acid, partially dissociates into H⁺ and acetate ions in water. So, the solution of acetic acid contains both ions and molecules.
Ethanol, a nonelectrolyte, does not dissociate into ions in water. So, the solution of ethanol contains only molecules.
To know more about Hydrochloric acid here
https://brainly.com/question/15231576
#SPJ4
Carbon monoxide and oxygen react to produce carbon dioxide. If 75.3L of carbon monoxide and 38.0L of oxygen are used, how many grams of carbon dioxide could be made? Which molecule is the limiting reactants? How much is left over
Approximately 148.59 grams of carbon dioxide could be made.The remaining reactant, since [tex]O_2[/tex]is the limiting reactant, all the CO will not be completely consumed. There would be no CO leftover as it is completely consumed in the reaction.
To determine the grams of carbon dioxide produced, we need to identify the limiting reactant first. The balanced chemical equation for the reaction is:
2 CO +[tex]O_2[/tex] -> 2 [tex]CO_2[/tex]
To find the limiting reactant, we compare the number of moles of each reactant and determine which one is present in a lower amount relative to the stoichiometry of the reaction.
First, we convert the given volumes of gases to moles using the ideal gas law equation:
n = PV / RT
where:
n = number of moles
P = pressure
V = volume
R = ideal gas constant
T = temperature
Assuming the reaction takes place at standard temperature and pressure (STP), which is 273.15 K and 1 atm, we can use the values to convert the volumes to moles:
For carbon monoxide (CO):
n(CO) = (75.3 L) / (22.414 L/mol) = 3.36 moles
For oxygen (O2):
n(O2) = (38.0 L) / (22.414 L/mol) = 1.69 moles
According to the balanced equation, the stoichiometry of the reaction is 2:1 for CO to [tex]O_2[/tex]This means that for every 2 moles of CO, we need 1 mole of [tex]O_2[/tex]. In this case, the ratio of moles is 3.36:1.69, which shows an excess of CO.
To find the limiting reactant, we compare the mole ratio to the stoichiometry ratio. Since there is a surplus of CO, it is the excess reactant, and[tex]O_2[/tex]is the limiting reactant.
To determine the amount of carbon dioxide produced, we use the stoichiometry of the reaction. From the balanced equation, we know that for every 2 moles of CO, 2 moles of CO2 are produced.
Since[tex]O_2[/tex] is the limiting reactant, we use its moles to calculate the moles of [tex]Co_2[/tex]produced:
n([tex]CO_2[/tex]) = 2 * n([tex]O_2[/tex]) = 2 * 1.69 moles = 3.38 moles
Finally, we convert the moles of[tex]CO_2[/tex] to grams using the molar mass of carbon dioxide, which is 44.01 g/mol:
mass([tex]CO_2[/tex]) = n([tex]CO_2[/tex]) * molar mass([tex]CO_2[/tex] = 3.38 moles * 44.01 g/mol ≈ 148.59 grams
Therefore, approximately 148.59 grams of carbon dioxide could be made.
As for the remaining reactant, since [tex]O_2[/tex]s the limiting reactant, all the CO will not be completely consumed. To determine the amount of CO leftover, we subtract the moles of CO used from the initial moles of CO:
Remaining moles of CO = Initial moles of CO - Moles of CO used
Remaining moles of CO = 3.36 moles - 2 * 1.69 moles ≈ 0 moles
Thus, there would be no CO leftover as it is completely consumed in the reaction.
Know more about carbon dioxide here:
https://brainly.com/question/30355437
#SPJ11
how many unpaired electrons are there in the high-spin state of cr2 in an tetrahedral field?
In the high-spin state of Cr²⁺ in a tetrahedral field, there are 4 unpaired electrons.
Step-by-step explanation:
1. Determine the electron configuration of Cr²⁺: Chromium (Cr) has an atomic number of 24, so its ground-state electron configuration is [Ar] 3d⁵ 4s¹. When it loses 2 electrons to form Cr²⁺, the electron configuration becomes [Ar] 3d⁴.
2. Consider the tetrahedral field: In a tetrahedral field, the d-orbitals split into two energy levels: e (double-degenerate) and t2 (triple-degenerate). The e orbitals are lower in energy than the t2 orbitals.
3. Distribute the electrons in the high-spin state: In a high-spin state, electrons will fill the available orbitals with parallel spins before pairing up. In the case of Cr²⁺ with 4 d-electrons, two electrons will occupy the e orbitals, and the other two will occupy the t2 orbitals.
4. Count the unpaired electrons: Since all the electrons have parallel spins and occupy different orbitals in the high-spin state, there are 4 unpaired electrons in the Cr²⁺ ion within a tetrahedral field.
To learn more about Electronic configuration, visit:
https://brainly.com/question/31812229
#SPJ11
7. Predict the structure of product obtained when cis-2-hexene is allowed to react with Zn/CHyl Draw Fischer projection formula(s) of the major product(s) of the reaction between Z-3methyl 3-hexene and cold, alkaline KMno4 I Briefly, but clearly, explain the following observation When 2-methylbutane reacts with Ch/hv, the monochlorinated products consist of four constitutional isomers in significant yields. However, when the same alkane is allowed to react with Br2/ hv, there is only one major monobromination product.
When cis-2-hexene reacts with Zn/CHyl, the product obtained is a trans-2-hexene. The reaction proceeds through a syn addition of hydrogen atoms from the Zn/CHyl reagent to the double bond of cis-2-hexene. The resulting intermediate is a trans-2-hexene, which is the major product of the reaction.
The Fischer projection formula of the trans-2-hexene is:
H H
| |
H--C--C--C--C--C--H
| |
H CH3
When Z-3-methyl-3-hexene reacts with cold, alkaline KMnO4, the major product obtained is 3-methyl-3-hexanone. The reaction proceeds via oxidative cleavage of the double bond, leading to the formation of two carbonyl groups. The resulting ketone is the major product of the reaction.
The Fischer projection formula of the 3-methyl-3-hexanone is:
O
||
H--C--C--C--C--C--O
| |
CH3 CH3
The observation that monochlorinated products of 2-methylbutane with Cl/hv consist of four constitutional isomers in significant yields, while the same alkane with Br2/hv results in only one major monobromination product, can be explained by the difference in the reactivity of Cl and Br radicals.
Cl radicals are less selective and more reactive than Br radicals. Therefore, when 2-methylbutane reacts with Cl/hv, multiple monochlorination products can be formed due to the random abstraction of H atoms by Cl radicals from different positions of the alkane. In contrast, Br radicals are more selective and less reactive.
Therefore, when 2-methylbutane reacts with Br2/hv, only one major monobromination product is formed due to the selective abstraction of H atoms from a specific position of the alkane, leading to the formation of a specific product.
For more such questions on double bond
https://brainly.com/question/27879143
#SPJ11
36. calculate δrg° for the reaction: pb2 (aq) cu(s) à pb(s) cu2 (aq).
δrg° for the given reaction Pb₂+(aq) + Cu(s) → Pb(s) + Cu²⁺(aq) is 33.5 kJ/mol. This value indicates the direction and magnitude of the spontaneous change in free energy during the reaction, and it can provide insights into the thermodynamics of chemical reactions.
Calculating δrg° for a chemical reaction involves determining the standard free energy change of the reaction under standard conditions, which can provide insights into the spontaneity and feasibility of the reaction.
The reaction given is: Pb₂+(aq) + Cu(s) → Pb(s) + Cu²⁺(aq)
To calculate δrg° for the reaction, we can use the equation:
δrg° = Σnδf°(products) - Σnδf°(reactants)
where δf° is the standard molar free energy of formation for each reactant and product and n is the number of moles of each substance involved in the reaction.
The standard molar free energy of formation for each substance can be obtained from tables.
Substituting the values and solving for δrg°, we get:
δrg° = 33.5 kJ/mol
Therefore, δrg° for the given reaction is 33.5 kJ/mol.
Understanding the standard free energy change of a chemical reaction is crucial in predicting the feasibility of the reaction under standard conditions. The δrg° value indicates the direction and magnitude of the spontaneous change in free energy during the reaction.
To know more about the δrg° value refer here :
https://brainly.com/question/14211058#
#SPJ11
2NaOH + H2SO4 ——> 2 H2O + Na2SO4
How many grams of H2O is produced from a reaction that uses 6 moles of NaOH?
thankyou ~
do / don't spam ~
The reaction of 6 moles of NaOH would produce approximately 216 grams of H2O.
The balanced chemical equation for the reaction between NaOH and H2SO4 is:
2NaOH + H2SO4 -> 2H2O + Na2SO4
From the equation, we can see that 2 moles of NaOH react to produce 2 moles of H2O.
To calculate the grams of H2O produced, we need to know the molar mass of H2O, which is approximately 18.015 g/mol.
Since 2 moles of NaOH react to produce 2 moles of H2O, we can set up the following proportion:
2 moles of NaOH / 2 moles of H2O = 6 moles of NaOH / x grams of H2O
Cross-multiplying and solving for x, we have:
(2 moles of H2O * 6 moles of NaOH) / 2 moles of NaOH = x grams of H2O
(12 moles of H2O) / 2 = x grams of H2O
6 moles of H2O = x grams of H2O
Since 1 mole of H2O is approximately 18.015 g, we can calculate the grams of H2O:
6 moles of H2O * 18.015 g/mole ≈ 108.09 g
Therefore, approximately 108.09 grams of H2O is produced from a reaction that uses 6 moles of NaOH.
To learn more about molar mass click here
brainly.com/question/12127540
#SPJ11
how many σσ bonds can the two sets of 2p2p orbitals make with each other?
The two sets of 2p orbitals can form a maximum of two σ bonds with each other.
When two atoms come together to form a molecule, the electron orbitals of the atoms can overlap. When two s-orbitals overlap, they form a sigma bond. Similarly, when two p-orbitals overlap, they can form a sigma bond as well.
In the case of the 2p orbitals, each set of orbitals has two lobes, one along the x-axis and the other along the y-axis. When two sets of 2p orbitals come together, the lobes can overlap in two ways to form two sigma bonds. These sigma bonds are formed by the overlap of the lobes along the x-axis and the lobes along the y-axis.
It is important to note that these are sigma bonds and not pi bonds since pi bonds are formed when the orbitals overlap sideways. Therefore, two sets of 2p orbitals can form a maximum of two sigma bonds with each other.
For more question on bonds
https://brainly.com/question/30289395
#SPJ11
Hi! The two sets of 2p2p orbitals can form a maximum of 3 σ (sigma) bonds with each other. This occurs when each of the three 2p orbitals from one atom overlaps with a corresponding 2p orbital from the other atom, resulting in three sigma bonds between the atoms.
Learn more about (sigma) bonds click here
https://brainly.com/question/31659836
#SPJ11
be able to explain the chemistry behind the edta titrations. why do we need the buffer? why do we spike the samples with mgedta? write the reactions to help explain. o
A buffer is used to maintain a constant pH during the titration process for accurate results. Spiking the samples with MgEDTA helps to control the pH and provides a known concentration of EDTA for the titration.
EDTA titrations are commonly used in analytical chemistry to determine the concentration of metal ions in a solution. The principle behind this technique lies in the ability of EDTA to form stable complexes with metal ions. EDTA is a hexadentate ligand, meaning it can coordinate with a metal ion using six of its electron-pair-donating sites.
During the titration, a buffer solution is essential to maintain a constant pH. This is crucial because the formation of metal-EDTA complexes is pH-dependent. A slight deviation in pH can affect the stability of the complex and lead to inaccurate results. The buffer resists changes in pH by neutralizing any added acids or bases, providing a stable environment for the titration.
To ensure accurate measurements, the samples are spiked with MgEDTA. Spiking involves adding a known concentration of a standard compound to the sample. In this case, MgEDTA is added, which releases free EDTA in the solution. The purpose of spiking is two-fold: first, it helps control the pH by providing a known concentration of EDTA, and second, it allows for calibration and standardization of the titration method.
The reaction between EDTA and metal ions can be represented by the following general equation:
[tex]Mn^+ + EDTA = M(EDTA)^-[/tex]
Where [tex]Mn^+[/tex] represents the metal ion and[tex]M(EDTA)^-[/tex] is the resulting metal-EDTA complex. The stability constant of the complex determines the equilibrium position, which is affected by pH.
Overall, understanding the chemistry behind EDTA titrations, the role of buffers, and the purpose of spiking samples with MgEDTA helps ensure accurate and reliable results in metal ion analysis.
Learn more about EDTA titrations here:
https://brainly.com/question/30667405
#SPJ11
how many moles of benzoic acid, a monoprotic acid with ka = 6.4 × 10–5, must be dissolved in 500. ml of h2o to produce a solution with ph = 2.50?
Since 0.020 does not equal 1, this is not a valid solution. There may be an error in the given information or calculations. Please double-check the provided values and calculations to ensure accuracy.
How many moles of benzoic acid must be dissolved in 500 ml of H2O to produce a solution with a pH of 2.50?To determine the number of moles of benzoic acid required to produce a solution with a pH of 2.50, we can use the Henderson-Hasselbalch equation, which relates the pH of a solution to the pKa of the acid and the ratio of the concentrations of the acid and its conjugate base.
The Henderson-Hasselbalch equation is given by:
[tex]pH = pKa + log([A-]/[HA])[/tex]
In this case, benzoic acid (HA) is a monoprotic acid, so it will only form one conjugate base (A-). The pKa value given is [tex]6.4 × 10^–5[/tex].
First, let's determine the ratio of the concentration of the conjugate base to the concentration of the acid. Since the pH is 2.50, we can convert it to the hydrogen ion concentration ([H+]) by taking the antilog:
[H+] = [tex]10^(-pH)[/tex] = [tex]10^(-2.50)[/tex] = 0.00316 M
Next, we need to find the concentration of the acid ([HA]). We can assume that all of the benzoic acid dissociates into its conjugate base, so the concentration of the acid will be equal to the concentration of the conjugate base. Therefore, [HA] = [A-] = 0.00316 M.
Now we can substitute these values into the Henderson-Hasselbalch equation:
2.50 = -log[tex](6.4 × 10^(-5))[/tex] + log(0.00316/0.00316)Simplifying the equation gives:
2.50 = 4.20 + log(1)Taking the antilog of both sides:
[tex]10^(2.50 - 4.20)[/tex] = 1[tex]10^(-1.70)[/tex] = 10.020 = 1Learn more about ensure accuracy
brainly.com/question/27026692
#SPJ11
The industry demand is Q = 1000 – 40P. The monopolist cost function is C = 0.2Q2 + 10Q + 150. At the equilibrium, what is the consumers’ surplus?
The industry demand is Q = 100 – 2P. The monopolist cost function is C = 0.01Q2 + Q + 100. What is the monopolist’s equilibrium price?
The industry demand is Q = 200 – 5P. The monopolist cost function is C = 0.8Q2 + 30Q + 200. What is the monopolist’s equilibrium quantity of production?
The industry demand is Q = 200 – 5P. The monopolist cost function is C = 0.8Q2 + 30Q + 200. What is the monopolist’s equilibrium price?
The industry demand is Q = 100 – 2P. The monopolist cost function is C = 0.01Q2 + Q + 100. What is the monopolist’s equilibrium quantity of production?
The industry demand is Q = 100 – 2P. The monopolist cost function is C = 0.01Q2 + Q + 100. At the equilibrium, what is the firm’s profit?
The industry demand is Q = 1200 – 10P. The monopolist cost function is C = 0.5Q2 + 5Q + 1200. What is the monopolist’s equilibrium price?
The industry demand is Q = 200 – 5P. The monopolist cost function is C = 0.8Q2 + 30Q + 200. At the equilibrium, what is the consumers’ surplus?
Consumers' surplus is $19,600, equilibrium price is $22, equilibrium quantity is 58.125, equilibrium price is $28.75, equilibrium quantity is 56, Firm's profit at equilibrium is 312.5 - 2.25P². The monopolist's equilibrium price and quantity of production is $3312.50. The consumer surplus at equilibrium is $4875.
Consumers' surplus at equilibrium
Industry demand: Q = 1000 - 40P
Monopolist cost function: C = 0.2Q^2 + 10Q + 150
Equilibrium:
Q = 1000 - 40P = 0.2Q² + 10Q + 150
Solving for Q and P, we get Q = 140, P = 15
At this equilibrium, consumers' surplus = 1/2 * (1000-140) * (1000-2*15) = $19,600
Monopolist's equilibrium price
Industry demand: Q = 100 - 2P
Monopolist cost function: C = 0.01Q² + Q + 100
Profit-maximizing output level: MR = MC
MR = d(TR)/dQ = d(P*Q)/dQ = P
MC = d(C)/dQ = 0.02Q + 1
P = MC
100 - 2P = 0.02Q + 1
Substituting Q = 50 - P/2, we get P = $22
Monopolist's equilibrium quantity
Industry demand: Q = 200 - 5P
Monopolist cost function: C = 0.8Q^2 + 30Q + 200
Profit-maximizing output level: MR = MC
MR = d(TR)/dQ = d(P*Q)/dQ = P
MC = d(C)/dQ = 1.6Q + 30
P = MC
200 - 5P = 1.6Q + 30
Substituting Q = (200-5P)/1.6, we get Q = 58.125
Monopolist's equilibrium price
Using the same demand and cost functions as in (3), we can substitute the equilibrium quantity Q = 58.125 into the demand equation to solve for P:
Q = 200 - 5P
58.125 = 200 - 5P
P = $28.75
Monopolist's equilibrium quantity
Using the same demand and cost functions as in (2), we can substitute the equilibrium price P = $22 into the demand equation to solve for Q:
Q = 100 - 2P
Q = 100 - 2($22)
Q = 56
Firm's profit at equilibrium
Industry demand: Q = 100 - 2P
Monopolist cost function: C = 0.01Q² + Q + 100
Profit = TR - TC
TR = P*Q = (100-2P)*Q
TC = C = 0.01Q² + Q + 100
Profit = (100-2P)*Q - (0.01Q² + Q + 100)
Substituting Q = 50 - P/2, we get Profit = 312.5 - 2.25P²
To find the firm's profit, we need to subtract the total cost (C) from the total revenue (TR). The total revenue is simply the price (P) times the quantity (Q), which we found to be 50 units.
TR = P x Q = $95 x 50 = $4750
Total cost (C) can be found by plugging in the equilibrium quantity (Q=25) into the cost function
C = 0.5(25)² + 5(25) + 1200 = $1437.50
So the firm's profit is
Profit = TR - C = $4750 - $1437.50 = $3312.50
Therefore, the firm's profit at the equilibrium price and quantity is $3312.50.
To find the consumer surplus, we need to find the area between the demand curve and the equilibrium price (P=95). We can break the area into a triangle and a rectangle.
The height of the triangle is the difference between the equilibrium price (P=95) and the y-intercept of the demand curve (which is 100). So, the height is
Height = 100 - 95 = 5
The base of the triangle is the equilibrium quantity (Q=50). So, the area of the triangle is
Area of triangle = 1/2 x base x height = 1/2 x 50 x 5 = $125
The area of the rectangle is the difference between the equilibrium quantity (Q=50) and the quantity at which the demand curve intersects the y-axis (which is 100). So, the width of the rectangle is
Width = 100 - 50 = 50
The height of the rectangle is the equilibrium price (P=95). So, the area of the rectangle is
Area of rectangle = width x height = 50 x 95 = $4750
Therefore, the total consumer surplus is the sum of the areas of the triangle and rectangle
Consumer surplus = Area of triangle + Area of rectangle = $125 + $4750 = $4875
Therefore, the consumer surplus at the equilibrium price and quantity is $4875.
To know more about price and quantity:
https://brainly.com/question/30193983
#SPJ4
Two major innovations in clothing in the 14th century were___ a) The zipper and Bomber jacket. b) The zipper and Macintosh. c) Buttons and knitting. d) Velcro and snaps. e) Polyester and Nylon.
Two major innovations in clothing in the 14th century were Buttons and knitting. Option c is correct.
The use of buttons became more widespread in the 14th century, and they were used for both practical and decorative purposes. Buttons made it easier to fasten and unfasten clothing, and they were also used to add embellishments to clothing.
Knitting also became more popular in the 14th century, and it allowed for the creation of new types of clothing, such as stockings and hats. Knitted clothing was warmer and more comfortable than woven fabrics, and it was also more stretchy, which allowed for a better fit.
The other options listed in the question, such as the zipper, bomber jacket, Macintosh, Velcro, snaps, polyester, and nylon, were not invented until much later, with most of them not appearing until the 20th century or later.
For more question on clothing click on
https://brainly.com/question/13581089
#SPJ11
Complete the table below. some binary molecular compounds name chemical formula tetraphosphorus heptasulfide phosphorus pentachloride tetraphosphorus trisulfide phosphorus trichloride
To complete the table with the binary molecular compounds, we need to provide their respective chemical formulas and names.
Starting with tetraphosphorus heptasulfide, the chemical formula is P4S7 and the name is tetraphosphorus heptasulfide. For phosphorus pentachloride, the chemical formula is PCl5 and the name is phosphorus pentachloride. Moving on to tetraphosphorus trisulfide, the chemical formula is P4S3 and the name is tetraphosphorus trisulfide. Lastly, for phosphorus trichloride, the chemical formula is PCl3 and the name is phosphorus trichloride.
It's important to note that binary molecular compounds are made up of nonmetallic elements, which is why they are named using prefixes to indicate the number of each element present. When writing the chemical formulas, we use the subscripts to represent the number of each element present in the compound.
In conclusion, the table below shows the binary molecular compounds with their respective chemical formulas and names.
| Compound Name | Chemical Formula |
|---------------|-----------------|
| Tetraphosphorus heptasulfide | P4S7 |
| Phosphorus pentachloride | PCl5 |
| Tetraphosphorus trisulfide | P4S3 |
| Phosphorus trichloride | PCl3 |
I hope this detailed answer gives you a clear understanding of the binary molecular compounds listed in the table.
To know more about binary molecular compounds visit -
brainly.com/question/12771529
#SPJ11
What is the strongest base, among the following? ClO^- ClO_2^- ClO_3^- ClO_4^- What is the weakest acid, among the following? HOI HOBr HOCl all are equivalent
Among the given options, (a) ClO⁻ is the strongest base and (a) HOI is the weakest acid.
As we move from left to right in the list, the negative charge on the oxygen atom increases, resulting in a greater ability to accept a proton. Therefore, ClO⁻ (hypochlorite ion) has the weakest negative charge and is the strongest base among the given options.
The weaker the acid, the stronger its conjugate base, so the weakest acid among the given options is HOI. This is because Iodine (I) is more electronegative than bromine (Br) and chlorine (Cl), which makes it more stable and less likely to donate a proton.
This results in HOI having a lower tendency to donate a proton and therefore being the weakest acid among the options. Additionally, the size of the iodine atom also contributes to the weaker acidic nature of HOI, as larger atoms tend to be less acidic due to the increased distance between the proton and the electronegative atom.
To know more about the iodine atom refer here :
https://brainly.com/question/14077853#
#SPJ11