You are riding in the passenger seat of a car as it goes around a tight turn. You slide across the seat to the passenger side door. Which statement below properly describes what is happening? a. You are exerting a centripetal force on the door. b. The door and seat are exerting a centripetal force on you that balances the centrifugal force of the turn. c. The car seat exerts a centripetal force on you, but not enough to keep you in place, so the door exerts the rest. d. The centrifugal force is greater than the force of friction between you and the seat, so you slide outward.
Answer:
Explanation:
answer C looks good
there isn't really a "centrifugal " force. :/ when we are pushed "back" in a car seat.. it's not because there is a force pushing us backwards... but a force pushing us forwards.. just like when turning too, a force pushes us into the corner, not a force pushing out of the corner. :)
Object 1 has a momentum of 10 kg m/s and Object 2 has a momentum of 25 kg m/s. Will it be easier to change the direction of movement of Object 1 or of Object 2?
Answer:
I think its object 1
Explanation:
Because the object that has more weight has a greater momentum and the lightest object that has a less momentum will be easier to change because its lighter.
A dump truck, whose bed is made of steel, holds an old steel watering trough. The bed of the truck is slowly raised until the trough begins to slide. For dry steel to steel μs= 0.80, μk= 0.60. What is the acceleration of the trough as it slides down the truck bed? Express your answer with the appropriate units.
Answer:
a = 1,538 m / s²
Explanation:
Let's use Newton's second law, let's set a reference system where the x-axis is parallel to the sloping floor of the truck and the positive direction is in the direction of movement of the trough, for this case the weight is the only force to decompose
sin θ = Wₓx / W
cos θ = W_y / W
Wₓ = W sin θ
W_y = W cos θ
Y axis
N -W_y = 0
N = mg cos θ
X axis
Wₓ - fr = m a
the friction force has the expression
fr = μ N
There are values of the friction coefficient (μ_s) one for when the movement has not started and it takes a smaller value for when the bodies are moving.
In this case we first find the angle for which the movement begins, in this part we use the static coefficient and the acceleration is zero
Wₓ - μ_s N = 0
m g sin θ = μ_s mg cos θ
tan θ = μ_s
θ = tan⁻¹ μ_s
we calculate
θ = tan⁻¹ 0.8
θ = 38.7º
For this angle, how the trough begins to move, the coefficient is reduced to the dynamics coefficient (μ_k) and the acceleration is different from zero.
we substitute
mg sin θ - μ_k mg cos θ = m a
a = g (sin θ - μ_k cos θ)
let's calculate
a = 9.8 (sin 38.7 - 0.6 cos 38.7)
a = 1,538 m / s²
pls help its already late lol
Answer:
Temperature
Explanation:
Answer:
Gravity
Explanation:
Gravity has nothing to do with weather. Temperature means hot or cold, water is rain and thunder, and wind is if it's in the winter or something like that
What variables affect density weight,conductivity,color,volume, or mass
Answer:
Density is affected by volume and mass.
Explanation:
Density is defined as the quantity of mass per unit of volume, or expressed mathematically, d = m/v.
Is the speed of light constant throughout the universe.?
Answer:
It is a basic postulate of the theory of relativity that the speed of light is constant. This can be broken down into two parts: The speed of light is independent of the motion of the observer. The speed of light does not vary with time or place.
Explanation:
if you ride a bike at 2 km/h and travel a total distance of 20km, how long willnit takr ( in second) you to teach your destination
Time = (20 km) x (1 hr/2 km) x (3,600 sec/hr)
Time = (20 x 1 x 3,600 km-hr-sec) / (2 km-hr)
Time = (20 x 1 x 3,600 / 2) (km-hr-sec / km-hr)
Time = 36,000 seconds
(That's 10 hours.)
In which scenario is the greatest amount of work done on a wagon?
A force of 55 N moves it 8 m.
A force of 60 N moves it 6 m.
A force of 50 N moves it 5 m.
A force of 40 N moves it 10 m.
Answer:
The first scenario!
Explanation:
W=F*d
a) 55*8= 440J
b) 60*6= 360J
c) 50*5= 250J
d) 40*10= 400J
The scenario with the greatest amount of work done on a wagon is "A force of 55 N moves it 8 m" and the Work done is 440N.m.
What is Work done?Work done is simply defined as the energy transfer that takes place when an object is either pushed or pulled over a certain distance by an external force. It is expressed as;
W = F × d
Where F is force applied and d is distance travelled.
From the question;
A force of 55 N moves it 8 m
W = 55N×8m = 440N.m
A force of 60 N moves it 6 m.
W = 60N×6m = 360N.m
A force of 50 N moves it 5 m.
W = 50N×5m = 250N
A force of 40 N moves it 10 m.
W = 40N×10m = 400N.m
Therefore, the scenario with the greatest amount of work done on a wagon is "A force of 55 N moves it 8 m" and the Work done is 440N.m.
Learn more about work done: brainly.com/question/26115962
#SPJ2
What is the gravitational potential energy of an object that has a mass of 8 kg and is 11.2 meters above Earth? Round your answer the nearest whole number.
A. 878 J
B. 30 J
C. 680 J
During spring semester at MIT, residents of the parallel buildings of the East Campus dorms battle one another with large catapults that are made with surgical hose mounted on a window frame. A balloon filled with dyed water is placed in a pouch attached to the hose, which is then stretched through the width of the room. Assume that the stretching of the hose obeys Hooke's law with a spring constant of 112 N/m. If the hose is stretched by 4.70 m and then released, how much work does the force from the hose do on the balloon in the pouch by the time the hose reaches its relaxed length
Answer:
1237 J
Explanation:
The work done by the hose on the balloon is the work done by a spring which is
W = 1/2k(x₀² - x₁²) where k = spring constant = 112 N/m, x₀ = 4.70 m and x₁ = 0 m.
Substituting the values of the variables into the equation, we have
W = 1/2k(x₀² - x₁²)
W = 1/2 × 112 N/m((4.70 m)² - (0 m)²)
W = 56 N/m(22.09 m² - 0 m²)
W = 56 N/m(22.09 m²)
W = 1237.04 J
W ≅ 1237 J
A city near the ocean experiences thunderstorms on a frequent basis. Which of these is the BEST explanation for this?
A.
The interactions of the waves with the landmass change the air pressure to cause thunderstorms.
B.
The cold fronts that form only over coastal areas cause thunderstorms.
C.
The amount of sunshine received by coastal areas causes thunderstorms.
D.
The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms.
Answer:
d
Explanation:
The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms. So, option D is correct.
What is meant by heat energy ?Heat energy of a system is defined as the energy transferred between the molecules due to the temperature difference between them. Heat energy is the energy responsible for the temperature of the molecules.
Here,
A city near the ocean experiences thunderstorms on a frequent basis. This is because,
The atmosphere near to the land is highly humid and warm and thus creates a relatively low pressure in the land. In order to balance the pressure variation the air from the oceans make movements towards the land, and as a result, sea breeze are formed. During the evenings when the water in the ocean is more warm and when land begins to cool, the air from land rushes towards the sea, in order to balance the pressure variation occurred here. This makes the air above the ocean highly humid and thus would lead to the formation of thunderstorms.
Hence,
The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms.
To learn more about heat energy, click:
https://brainly.com/question/29210982
#SPJ2
PLEASE HELP!!!
What are some compound machines that are used today?
Answer:
Examples of compound machines include bicycles, cars, scissors, and fishing rods with reels. Compound machines generally have lower efficiency but greater mechanical advantage than simple machines
Brilianst
Answer:
screws, inclined planes , etc
Explanation:
no explanation needed
A woman stands still holding a 350 Newton bag (about 80 pounds) 2 meters off the ground. How much work does the woman do?
Answer:
700 Joules
Explanation:
What we know:
Force = 350 Newton
Distance = 2 meters
Work = ?
The formula for work is:
Work = force x distance
Plugging values into equation:
Work = 350 Newtons x 2 meters
Work = 700 Joules
I had the same question on the homework assignment with the answers provided:
a) It depends on how long she holds the bag
b) 350 Joules
c) none
d) 350 Newtons
The final answer would be c) none. The work done is 700 Joules. Hope this helps!
Explain which energies work together to bake the bread
and cook the eggs.
Answer:
Thermal Energy
Explanation:
The energies that work together to bake the bread and cook the eggs is the thermal energy. Thermal energy is basically heat energy, which makes the food warmer.
Thermal energy and chemical energy work together to bake the bread and cook the eggs.
What is thermal energy?The energy present in a system that determines its temperature is referred to as thermal energy. Thermal energy flows as heat. Thermodynamics is a whole field of physics that studies how heat is transmitted across various systems and how work is done in the process.
What is chemical energy?Chemical energy is described as: the power that is kept in chemical compound bonds (molecules and atoms). It is released during the chemical process, which is referred to as an exothermic reaction, which mostly generates heat as a byproduct.
When the bread is baked or the eggs are cooked, thermal energy is provided from outside and chemical energy inside the molecules of bread or eggs come to play. So, these two energies work together to bake the bread and cook the eggs.
Learn more about energy here:
https://brainly.com/question/1932868
#SPJ2
A basketball player jumps straight up for a ball. To do this, he lowers his body 0.250 m and then accelerates through this distance by forcefully straightening his legs. This player leaves the floor with a vertical velocity sufficient to carry him 0.960 m above the floor. (a) Calculate his velocity (in m/s) when he leaves the floor. 4.33 Correct: Your answer is correct. m/s (b) Calculate his acceleration (in m/s2) while he is straightening his legs. He goes from zero to the velocity found in part (a) in a distance of 0.250 m.
Answer:
a. 3.73 m/s b. 27.8 m/s²
Explanation:
(a) Calculate his velocity (in m/s) when he leaves the floor.
Using the conservation of energy principles,
Potential energy gained by basketball player = kinetic energy loss of basket ball player
So, ΔU + ΔK = 0
ΔU = -ΔK
mg(h' - h) = -1/2m(v'² - v²)
g(h' - h) = -1/2(v'² - v²) where g = acceleration due to gravity = 9.8 m/s², h' = 0.960 m, h = 0.250 m, v' =0 m/s (since the basketball player momentarily stops at h' = 0.960 m) and v = velocity with which the basketball player leaves the floor
Substituting the values of the variables into the equation, we have
9.8 m/s²(0.960 m - 0.250 m) = -1/2((0 m/s)² - v²)
9.8 m/s²(0.710 m) = -1/2(-v²)
6.958 m²/s² = v²/2
v² = 2 × 6.958 m²/s²
v² = 13.916 m²/s²
v = √(13.916 m²/s²)
v = 3.73 m/s
(b) Calculate his acceleration (in m/s2) while he is straightening his legs. He goes from zero to the velocity found in part (a) in a distance of 0.250 m.
Using v² = u² + 2as where u = initial speed of basketball player before lengthening = 0 m/s, v = final speed of basketball player after lengthening = 3.73 m/s, a = acceleration during lengthening and s = distance moved during lengthening = 0.250 m
So, making, a subject of the formula, we have
a = (v² - u²)/2s
Substituting the values of the variables into the equation, we have
a = ((3.73 m/s)² - (0 m/s)²)/(2 × 0.250 m)
a = (13.913 m²/s² - 0 m²/s²)/(0.50 m)
a = 13.913 m²/s²/(0.50 m)
a = 27.83 m/s²
a ≅ 27.8 m/s²
Why is fluorine more chemically reactive than nitrogen
Answer:
Me encanta el pollo, de todos modos, un día que es hoy, por cierto, fui a la tierra de los pollos y caminé en México, ¿sabías que es mi sueño? ¿Olvidé que mi nombre es jemma y me gusta caminar? párrafo así que nos vemos
Explanation:
Answer:
Fluorine needs to gain only 1 electron to have a full octet, while nitrogen needs to gain 3.
TAKING 100 PONTS!!! PLEASE SOMEONE HELP.JUST LOOK THE PICTURE
Explanation:
oh no i hope i dont fall and the i agree with the other dude
Answer: Okay, thanks I really appreciate the generosity.
Gravity does not actually "pull" objects at
all, rather gravity is a result of the warping.
or curving, of
A Stars and planets
B. The solar system
C Spacetime
D. Any object
Waves are ?
that can travel through matter.
Answer:
A wave can be thought of as a disturbance or oscillation that travels through space-time, accompanied by a transfer of energy. The direction a wave propagates is perpendicular to the direction it oscillates for transverse waves. A wave does not move mass in the direction of propagation; it transfers energy.
Define speed and what is it’s SI unit.
3. What is the power of a derby race car that uses a 50 N force to travel 20 meters in 10 seconds?
A. 1000 W
B. 100 W
C. 80 W
The local church is hosting a carnival which includes a bumper car ride. Bumper car A and its driver have a mass of 300 kg; bumper car B and its driver have a mass of 200 kg. Bumper car A has a velocity to the right of 2 m/s and bumper car B is at rest. At t = 0 s, bumper car A and B are separated by 10 m. Bumper car A accelerates at 1 m/s2 to a velocity of 4 m/s and continues at this constant speed until colliding with bumper car B.
Calculate the time required for bumper car A to travel the 10 m to collide with bumper car B.
Calculate the speed of bumper car A following the collision with bumper car B, which now has a velocity to the right of 3 m/s.
Is the direction of motion for bumper car A following the collision with bumper car B to the right, to the left, or is bumper car A at rest?
Is the collision elastic? Justify your answer.
Answer:
a. 20 s
b. 0 m/s
c. right
d.no its inelastic because when the car b was at rest and a was coming in at it, since b had no force what so ever car a swept it away with it moving to the right
Explanation:
im not sure though
By applying conservation of linear momentum, the answers are:
1. Time = 2 s
2. 3 m/s
3. same direction
4. Inelastic collision
COLLISIONThere are for types of collision. They are;
Elastic CollisionPerfectly elastic collisionInelastic collisionPerfectly Inelastic collisionGiven that a local church is hosting a carnival which includes a bumper car ride. Bumper car A and its driver have a mass of 300 kg; bumper car B and its driver have a mass of 200 kg. Bumper car A has a velocity to the right of 2 m/s and bumper car B is at rest. At t = 0 s, bumper car A and B are separated by 10 m. Bumper car A accelerates at 1 m/s2 to a velocity of 4 m/s and continues at this constant speed until colliding with bumper car B.
1. The time required for bumper car A to travel the 10 m to collide with bumper car B can be calculated by using first equation of linear motion.
V = U + at
Where
V = 4 m/s
U = 2 m/s
a = 1 m/[tex]s^{2}[/tex]
Substitute all the parameters into the formula
4 = 2 + t
t = 4 - 2
t = 2s
2. To calculate the speed of bumper car A following the collision with bumper car B, which now has a velocity to the right of 3 m/s, we will apply conservation of linear momentum
[tex]m_{1}u_{1}[/tex] = [tex]m_{1}v_{1}[/tex] + [tex]m_{2}v_{2}[/tex]
300 x 4 = 300V + 200 x 3
1200 = 300V + 300
300V = 1200 - 300
300V = 900
V = 900/300
V = 3 m/s
3. Since the final velocity of car A is positive, the direction of motion for bumper car A follows the collision with bumper car B to the right.
4. Since the both move at the same velocity, the collision inelastic.
Learn more about Collision here: https://brainly.com/question/25121535
PLEASE HELP ME WITH THIS ONE QUESTION
Which pendulum would have the highest frequency?
1) 1 kg mass and 0.5-meter length
2) 0.5 kg mass and 0.75-meter length
3) 0.5 kg mass and 1-meter length
4) 1 kg mass and 0.75-meter length
Answer:
B is the Answer
Follow me please
Mark brainliest
Answer:
The answer is A
Explanation:
This is because f = 1/T,
or frequency equals 1 over period, T
Since the highest T would be the answer with the greatest length and mass does not matter the answer would be c IF they were asking for the highest period.
F is found by 1 over T so the greatest F would be the smallest number, Hence answer A
Please Mark me brainiest
student c precise or accurate darts
Answer:
i don't get it
Explanation:
In 1976, a 53 kg helicopter was built in Denmark. Suppose this helicopter flew east with a speed of 60.0 m/s and the total momentum of the helicopter and pilot was 7,200 kg∙m/s to the east. What was the mass of the pilot?
Answer:
67 kg.
Explanation:
From the question,
Total momentum = (mass of the pilot+ mass of the helicopter)×velocity.
I = (m+M)v............................... Equation 1
Where I = Total momentum of the pilot and the helicopter, m = mass of the pilot, M = mass of the helicopter, v = velocity.
make m the subject of the equation
m = (I/v)-M.............................. Equation 2
Given: I = 7200 kg.m/s, v = 60 m/s, M = 53 kg.
Substitute these values into equation 2
m = (7200/60)-53
m = 120-53
m = 67 kg.
Hence the mass of the pilot is 67 kg
Problem 05.086 - Water pumped from a lower reservoir to a higher reservoir Water is pumped from a lower reservoir to a higher reservoir by a pump that provides 21 kW of useful mechanical power to the water. The free surface of the upper reservoir is 45 m higher than the surface of the lower reservoir. If the flow rate of water is measured to be 0.03 m3/s, determine the irreversible head loss of the system and the lost mechanical power during this process. Take the density of water to be 1000 kg/m3. The irreversible head loss of the system is 26.35 m. The lost mechanical power in this process is kW.
Answer:
Lost Mechanical Power = 7.7565 KW
Head Loss = 26.35 m
Explanation:
First, we will find the useful mechanical power used to transport water to the higher reservoir:
[tex]P_{useful} = \rho ghV[/tex]
where,
P_useful = Useful mechanical Power = ?
ρ = density of water = 1000 kg/m³
g = acceleration due to gravity = 9.81 m/s²
h = height = 45 m
V = Volume flow rate = 0.03 m³/s
Therefore,
[tex]P_{useful} = (1000\ kg/m^3)(9.81\ m/s^2)(45\ m)(0.03\ m^3/s)\\P_{useful} = 13243.5\ W = 13.2435\ KW[/tex]
Now, the lost mechanical power will be:
[tex]Lost\ Mechanical\ Power = Total\ Mechanical\ Power - Useful\ power\\Lost\ Mechanical\ Power = 21\ KW - 13.2435\ KW\\[/tex]
Lost Mechanical Power = 7.7565 KW
Now, for the head loss:
[tex]Lost\ Mechanical\ Power = \rho g(Head\ Loss)V\\Head\ Loss = \frac{Lost\ Mechanical\ Power}{\rho gV} \\\\Head\ Loss = \frac{7756.5\ W}{(1000\ kg/m^3)(9.81\ m/s^2)(0.03\ m^3/s)} \\[/tex]
Head Loss = 26.35 m
When you are doing either a chest or a bounce pass where are your thumbs at the end of the
motion?
Answer:
yes
Explanation:
When an object is raised vertically, work is done against __________. What one word completes the sentence?
please help quickly!!
When an object is raised vertically, work is done against _gravitational force _________
What is gravitational force ?The force of attraction between all masses in the universe; especially the attraction of the earth's mass for bodies near its surface is called gravitational force .
On every body there is a force acting named gravitational force which attracts the body downward .
If a object / body is thrown up it always comes downward if only gravitational force is acting on it which act due to earth's gravity .
When an object is raised vertically, work is done against _gravitational force _________
learn more about gravitational force :
https://brainly.com/question/12528243?referrer=searchResults
#SPJ2
a wave of frequency 10hz forms a stationary wave pattern in a medium where the velocity is 30cm/s. the distance between adjacent nodes is?
Answer:
The ans is 1 not 2
Explanation:
The distance between two adjacent node in a stationary wave is half wavelength π/2 and not full wavelength as in π,so when solving we got 2cm as the wavelength since they ask the dist. Also adjacent nodes you will divide it by 2 and the ans will give u 1cm.
Hope this helps.
HELP
HELP
SORRY TO BEG :/
HELP ASAP :) PLZ
Answer:
It's b because he discovered galaxies .