Jon earns £90 one week. The next week, he receives a pay rise and earns £130. Write the amount of his pay rise as a fraction of his original pay. Give your answer in its simplest form.

PLEASE HELP I REALLY NEED IT FOR HOMEWORK

The exact values for the given functions at s = -2π are sin(-2π) = 0, cos(-2π) = -1 and tan(-2π) = 0

At s = -2π, the point on the unit circle is located at the angle of -2π radians or 360 degrees (a full counterclockwise revolution).

The values for the circular functions at s = -2π are as follows:

The y-coordinate of the point on the unit circle is the sine value.

At -2π, the y-coordinate is 0, so sin(-2π) = 0.

The x-coordinate of the point on the unit circle is the cosine value.

At -2π, the x-coordinate is -1, so cos(-2π) = -1.

The tangent value is calculated as the ratio of sine to cosine.

Since sin(-2π) = 0 and cos(-2π) = -1,

we have tan(-2π) = sin(-2π) / cos(-2π) = 0 / (-1) = 0.

Therefore, the exact values for the given functions at s = -2π are sin(-2π) = 0, cos(-2π) = -1 and tan(-2π) = 0

To learn more on trigonometry click:

https://brainly.com/question/25122835

#SPJ1

the diameter of the tablecloth is approximately 7.0 feet.

To determine the diameter of the tablecloth, we need to use the formula relating the circumference of a circle to its diameter. The formula is:

C = πd

where C is the circumference and d is the diameter.

In this case, the length of the border is given as 21.98 feet, which represents the circumference of the tablecloth.

21.98 = πd

To solve for d (the diameter), we can rearrange the equation and isolate d:

d = 21.98 / π

Using the value of π as approximately 3.14159, we can calculate the diameter:

d ≈ 21.98 / 3.14159 ≈ 7.0 feet

To know more about circumference visit:

brainly.com/question/28757341

#SPJ11

True.  An optimal solution to a linear programming problem can be found at an extreme point of the feasible region for the problem. This is known as the extreme point theorem of linear programming.

An extreme point is a vertex or corner point of the feasible region. In a linear programming problem, the objective function is optimized subject to a set of linear constraints. The feasible region is the set of all points that satisfy these constraints.

The extreme point theorem states that if a feasible region is bounded and the objective function has a finite maximum or minimum value, then an optimal solution can be found at an extreme point of the feasible region. This is because the objective function is linear and takes on its maximum or minimum value at the boundary points of the feasible region, which are the extreme points.

Therefore, when solving a linear programming problem, it is important to identify the extreme points of the feasible region as they can be used to determine the optimal solution. This can be done using techniques such as the simplex method, which moves from one extreme point to another until the optimal solution is found.

Learn more about programming here:

https://brainly.com/question/11023419

#SPJ11

Answer:

Step-by-step explanation:

You want the values of x and y in the triangle shown.

The angles marked 4x and 5x form a linear pair, so have a total measure of 180°:

  4x +5x = 180°

  9x = 180° . . . . . . combine terms

  x = 20° . . . . . . . . divide by 9

The sum of angles in the triangle is 180°, so we have ...

  y + 3x + 4x = 180°

  y + 7(20°) = 180° . . . . . . substitute the value of x, collect terms

  y = 40° . . . . . . . . . . . subtract 140°

<95141404393>

Therefore, In summary: a. Independent samples, b. Paired (dependent) samples.

In both situations, we need to determine if the samples are independent or paired (dependent).
a. The researcher gathers two random samples of GPAs from 100 men and 100 women. These samples are not related, as they are collected separately and do not depend on each other. Therefore, this situation has independent samples.
b. In this case, the researcher collects a sample of husbands and wives, and each person reports his or her GPA. The samples are related because they are taken from couples, where the GPA of one spouse may be influenced by the other spouse's GPA. This situation has paired (dependent) samples.

Therefore, In summary: a. Independent samples, b. Paired (dependent) samples.

To know more about probability visit :

https://brainly.com/question/13604758

#SPJ11

Mean/variance asset allocation optimization is a strategy used in portfolio management that involves selecting the optimal mix of investments to achieve the highest possible return given a certain level of risk.

The objective function is to maximize the expected return while minimizing the portfolio's volatility or risk. Two constraints that could be used include setting a maximum allocation to any one asset class and maintaining a minimum level of diversification across the portfolio. For example, the objective function could be expressed as:

Maximize: E(R) - k * Var(R)

Subject to:
- Sum of weights = 1
- Maximum allocation to any one asset class = x%
- Minimum diversification = y

Here, E(R) represents the expected return of the portfolio, Var(R) represents the variance or volatility of the portfolio, k is a constant that represents the investor's risk tolerance, and x% and y are pre-determined limits for the constraints.

By solving for the optimal weights of the portfolio using this model, investors can balance the potential for higher returns with the desire to limit risk.

To know more about portfolio management click on below link:

https://brainly.com/question/31198310#

#SPJ11

In order to prove the statement (A ∩ B) ⊆ A, we need to show that every element in the intersection of A and B is also an element of A. Let's go through the steps:

a. If x is in (A ∩ B), x is in A and x is in B by the definition of intersection. The intersection of two sets A and B consists of elements that are present in both sets.
b. Since x is in A and x is in B, we can conclude that x is indeed in A. This step demonstrates that the element x, which is part of the intersection (A ∩ B), belongs to the set A.
c. As x is in A, it satisfies the condition for being part of the intersection (A ∩ B), i.e., x is in A and x is in B by the definition of intersection.
Based on these steps, we can conclude that for any element x in the intersection (A ∩ B), x must also be in set A. This means (A ∩ B) ⊆ A, proving the given statement.

To know more about Sets Intersection visit:
https://brainly.com/question/31384647
#SPJ11

The correct option is (d) i.e. Today’s temperature is close to the mean for the previous 10 days. Let's first discuss the concept of standard deviation: Standard deviation is a measure of the amount of variation or dispersion of a set of values. It indicates how much the data deviates from the mean.

Question 9: Lisetta is working with a set of data showing the temperature at noon on 10 consecutive days. She adds today’s temperature to the data set and, after doing so, the standard deviation falls. What conclusion can be made? We know that when standard deviation falls, then the data values are closer to the mean. Since today's temperature is added to the data set and after that standard deviation falls, therefore today's temperature should be close to the mean for the previous 10 days. So, the correct option is: Today’s temperature is close to the mean for the previous 10 days.

Explanation: Let's first discuss the concept of standard deviation: Standard deviation is a measure of the amount of variation or dispersion of a set of values. It indicates how much the data deviates from the mean. The standard deviation is calculated as the square root of the variance. The formula for standard deviation is:σ = √(Σ ( xi - μ )² / N)

where,σ = the standard deviation, xi = the individual data points, μ = the mean, N = the total number of data points

Now, coming back to the question, if the standard deviation falls after adding today's temperature, it means that today's temperature should be close to the mean temperature of the previous 10 days. If the temperature was very low as compared to the previous 10 days, the standard deviation would have increased instead of falling. Therefore, we can conclude that Today's temperature is close to the mean for the previous 10 days.

To know more about Standard deviation visit: https://brainly.com/question/13498201

#SPJ11

The surface can be visualized as a twisted, curved shape that varies with changes in θ and z.

In cylindrical coordinates, a point P is located by its distance r from the origin, its angle θ measured from the positive x-axis in the xy-plane, and its height z above the xy-plane.

The surface 2z = -8x + 9y in cylindrical coordinates needs to express the equation in terms of cylindrical variables r, θ, and z.
To express the equation 2z = -8x + 9y in cylindrical coordinates, we need to eliminate x and y in favor of r and θ. We can do this by using the conversion formulas:
x = r cos(θ)
y = r sin(θ)
Substituting these equations into the original equation gives:
2z = -8(r cos(θ)) + 9(r sin(θ))
Simplifying and rearranging, we get:
r = (2z)/(9sin(θ)-8cos(θ))
This is the desired form for r as a function of θ and z.

Therefore, we can describe the surface 2z = -8x + 9y in cylindrical coordinates as:
r = (2z)/(9sin(θ)-8cos(θ))
It's important to note that this equation defines a surface rather than a curve, since there are multiple values of r for each pair of (θ, z) that satisfy the equation.

For similar question on surface:

https://brainly.com/question/28267043

#SPJ11

To describe the surface 2z = -8x + 9y in cylindrical coordinates in the form r=f(θ,z), we first need to convert the equation from Cartesian coordinates to cylindrical coordinates.

We know that x = r cosθ and y = r sinθ, so substituting these into the equation, we get 2z = -8r cosθ + 9r sinθ. We can simplify this to z = (-4/9)r cosθ + (9/2)r sinθ. This equation shows that the surface can be described as a function of r, θ, and z, where r is the cylindrical radius, θ is the cylindrical angle, and z is the cylindrical height. Therefore, the equation in cylindrical coordinates would be r = f(θ,z) = (-4/9)z cosθ + (9/2)z sinθ.  we need to convert the Cartesian coordinates (x, y, z) into cylindrical coordinates (r, θ, z). Here's a step-by-step explanation:

1. Recall the conversion equations: x = r*cos(θ), y = r*sin(θ), and z = z.
2. Substitute these equations into the given surface equation: 2z = -8(r*cos(θ)) + 9(r*sin(θ)).
3. Rearrange the equation to express r as a function of θ and z: r = (2z)/(9*sin(θ) - 8*cos(θ)).
Now, the surface 2z = -8x + 9y has been successfully converted into cylindrical coordinates as r = f(θ, z) = (2z)/(9*sin(θ) - 8*cos(θ)).

Learn more about cylindrical coordinates here: brainly.com/question/14505031

#SPJ11

The nth term of the function is f(n) = 6n² - 15n + 6

From the question, we have the following parameters that can be used in our computation:

-3,0,5,12,21

So, we have

-3, 0, 5, 12, 21

In the above sequence, we have the following first differences

3   5   7   9

The second differrences are

2   2    2

This means that the sequence is a quadratic sequence

So, we have

f(0) = -3

f(1) = 0

f(2) = 5

A quadratic sequence is represented as

an² + bn + c

Using the points, we have

a + b + c = -3

4a + 2b + c = 0

9a + 3b + c = 15

So, we have

a = 6, b = -15 and c = 6

This means that

f(n) = 6n² - 15n + 6

Hence, the nth term of the function is f(n) = 6n² - 15n + 6

Read more about sequence at

https://brainly.com/question/30499691

#SPJ1

Answer:

V=lwh

40 m³

Step-by-step explanation:

To find the volume of this shape, we can use the formula:

[tex]V=lwh[/tex] with l being the length, w being the width, and h being the height.

We know the formula:

[tex]V=lwh[/tex]

and we have 3 values, so we can substitute:

V=5(2)(4)

simplify

V=40

The volume of this 3D shape is 40 m³.

Hope this helps! :)

To find f, we need to integrate the given equation f‴(x) = cos(x) three times, using the initial conditions f(0) = 2, f′(0) = 5, and f″(0) = 9.

First, we integrate f‴(x) = cos(x) to get f″(x) = sin(x) + C1, where C1 is the constant of integration.

Using the initial condition f″(0) = 9, we can solve for C1 and get C1 = 9.

Next, we integrate f″(x) = sin(x) + 9 to get f′(x) = -cos(x) + 9x + C2, where C2 is the constant of integration.

Using the initial condition f′(0) = 5, we can solve for C2 and get C2 = 5.

Finally, we integrate f′(x) = -cos(x) + 9x + 5 to get f(x) = sin(x) + 9x^2/2 + 5x + C3, where C3 is the constant of integration.

Using the initial condition f(0) = 2, we can solve for C3 and get C3 = 2.

Therefore, using integration, the solution is f(x) = sin(x) + 9x^2/2 + 5x + 2.

To know more about integration, visit:

https://brainly.com/question/18125359

#SPJ11

The required answer is the length of the vector x = [-4, -9] is approximately 9.85.

To find the length of the vector x = [-4, -9], you can use the formula:
Length = √(x₁² + x₂²)
where x₁ and x₂ are the components of the vector.
A vector is what is needed to "carry" the point A to the point B .

Step 1: Identify the components of the vector:
x₁ = -4
x₂ = -9
Vector spaces generalize Euclidean vectors, In which allow modeling of physical quantities. The vector space such as forces and velocity, that have not only a magnitude it also a direction.

The concept of vector spaces is fundamental for the linear algebra, together with the concept of matrix, which allows computing in vector spaces. This provides a concise and synthetic way for manipulating and studying systems of linear equations.
Step 2: Square each component:
(-4)² = 16
(-9)² = 81
After this step then,
Step 3: Add the squared components:
16 + 81 = 97

Step 4: Take the square root of the sum:
√97 ≈ 9.85

So, the length of the vector x = [-4, -9] is approximately 9.85.

To know more about vector. Click on the link.

https://brainly.com/question/13322477

#SPJ11

The input for the function h(e) = 5 - 2e is the variable "e." It represents the value that is being plugged into the function to obtain the output.

In the given function h(e) = 5 - 2e, "e" is the input variable. It represents the value that is being fed into the function to calculate the output value.

When we say "input" in the context of a function, we are referring to the independent variable or the value that we want to evaluate within the function. In this case, "e" is the input variable, and it can take on any valid value.

For example, if we want to find the output value of the function h(e) when e = 3, we substitute e = 3 into the function:

h(3) = 5 - 2(3) = 5 - 6 = -1

In this case, "e" is the input value that is used to calculate the output value of the function h(e).

Moving on to the second question, given the function y = 3x - 5, we need to find the inverse function.

To find the inverse function, we switch the roles of x and y and solve for y.

Start with the given equation: y = 3x - 5

Swap x and y: x = 3y - 5

Solve for y:

x + 5 = 3y

3y = x + 5

y = (x + 5)/3

Therefore, the inverse function of y = 3x - 5 is y = (x + 5)/3.

Learn more about function here:

https://brainly.com/question/30721594

#SPJ11

The expected number of modes in the distribution of annual incomes of all those in a statistics class, including the instructor is most likely 2. Thus, the correct option is :

(D) The distribution is probably bimodal.

The reasoning behind the expected number of modes being 2 is that there are likely two distinct groups of people in the class: the students and the instructor. Students typically have lower annual incomes, while the instructor, being a professional, likely has a higher annual income. These two separate groups create two peaks in the income distribution, making it bimodal.

A unimodal distribution, on the other hand, would suggest that there is only one group of people in the class with relatively similar income levels. However, in this case, we can reasonably assume that there are two separate groups with distinct income levels.

Thus, the correct option is :

(D) The distribution is probably bimodal.

To learn more about modes visit : https://brainly.com/question/27358262

#SPJ11

To determine which policy is more popular, we can conduct a hypothesis test. Let's assume that the null hypothesis is that the two policies have the same level of popularity, and the alternative hypothesis is that one policy is more popular than the other. We can calculate the p-value for each policy using a two-sample proportion test. Comparing the p-values to the significance level of 10%, we can see if either policy is significantly more popular.

To conduct a hypothesis test, we need to calculate the sample proportions for each policy. For the first policy, the sample proportion is 346/452 = 0.765. For the second policy, the sample proportion is 269/378 = 0.712.

We can then calculate the standard error for each sample proportion using the formula sqrt(p*(1-p)/n), where p is the sample proportion and n is the sample size. For the first policy, the standard error is sqrt(0.765*(1-0.765)/452) = 0.029. For the second policy, the standard error is sqrt(0.712*(1-0.712)/378) = 0.032.

We can then calculate the test statistic, which is the difference between the sample proportions divided by the standard error of the difference. This is given by (0.765 - 0.712) / sqrt((0.765*(1-0.765)/452) + (0.712*(1-0.712)/378)) = 2.13.

Finally, we can calculate the p-value for this test statistic using a normal distribution. The p-value for a two-tailed test is 0.033, which is less than the significance level of 10%. Therefore, we can conclude that the first policy is significantly more popular than the second policy at a 10% significance level.

Based on the hypothesis test, we can conclude that the first policy is more popular than the second policy at a 10% significance level. Therefore, the politician should publicly support the first policy during the reelection campaign.

To know more about hypothesis test visit:

https://brainly.com/question/30588452

#SPJ11

The negative correlation coefficient of -0.73 between consumption of vitamin A and the cancer rate of a particular type of cancer suggests that as vitamin A consumption increases, the cancer rate tends to decrease.

A correlation coefficient measures the strength and direction of the linear relationship between two variables.

In this case, a correlation coefficient of -0.73 indicates a negative correlation between consumption of vitamin A and the cancer rate.

Interpreting this correlation, it can be inferred that there is an inverse relationship between the two variables. As consumption of vitamin A increases, the cancer rate tends to decrease.

However, it is important to note that correlation does not imply causation.

It would be incorrect to conclude that consuming more vitamin A causes this type of cancer. Correlation does not provide information about the direction of causality.

Other factors and confounding variables may be involved in the relationship between vitamin A consumption and cancer rate.

To establish a causal relationship, further research, such as experimental studies or controlled trials, would be necessary. These types of studies can help determine whether there is a causal link between vitamin A consumption and the occurrence of this particular cancer.

Learn more about correlation coefficient here:

https://brainly.com/question/29208602

#SPJ11

Answer:

2,5,10,17,26

Step-by-step explanation:

You just have to plug 1,2,3,4, and 5 in for n.

Answer: The value of x is 3

Step-by-step explanation: Let, 3x-4x+3=0--------(1)

                                                     3x+4x-21=0-------(2)

Now, add equations 1 & 2,

3x-4x+3=0

3x+4x-21=0

6x-18 = 0   [4x in both equations gets canceled out.]

6x=18

x=18/6=3

Therefore, the value of x is

To practice more like :brainly.com/question/11720294?referrer=searchResults

The unit tangent vector T(t) and the principal unit normal vector N(t)=T(t)=N(t)=R'(t) = 2i + 2tj, ||R'(t)|| = 2*sqrt(1 + t^2), T(t) = i/sqrt(1 + t^2) + tj/sqrt(1 + t^2), N(t) = (2t/sqrt(1 + t^2))*i + (1/sqrt(1 + t^2))*j

We are given the vector function R(t) = 2ti + t^2j + 3k, and we need to find the derivative R'(t), its norm, the unit tangent vector T(t), and the principal unit normal vector N(t).

To find the derivative R'(t), we take the derivative of each component of R(t) with respect to t:

R'(t) = 2i + 2tj

To find the norm of R'(t), we calculate the magnitude of the vector:

||R'(t)|| = sqrt((2)^2 + (2t)^2) = 2*sqrt(1 + t^2)

To find the unit tangent vector T(t), we divide R'(t) by its norm:

T(t) = R'(t)/||R'(t)|| = (2i + 2tj)/(2*sqrt(1 + t^2)) = i/sqrt(1 + t^2) + tj/sqrt(1 + t^2)

To find the principal unit normal vector N(t), we take the derivative of T(t) and divide by its norm:

N(t) = T'(t)/||T'(t)|| = (2t/sqrt(1 + t^2))*i + (1/sqrt(1 + t^2))*j

Therefore, we have:

R'(t) = 2i + 2tj

||R'(t)|| = 2*sqrt(1 + t^2)

T(t) = i/sqrt(1 + t^2) + tj/sqrt(1 + t^2)

N(t) = (2t/sqrt(1 + t^2))*i + (1/sqrt(1 + t^2))*j

Learn more about tangent here

https://brainly.com/question/30385886

#SPJ11

Answer:

Step-by-step explanation:

     To eliminate the parameter t and find a Cartesian equation for the parametric equations x = t^2 and y = 9 - 4t, we can solve the first equation for t and substitute it into the second equation.

From x = t^2, we can solve for t as t = √x.

Substituting this value of t into the equation y = 9 - 4t, we get y = 9 - 4√x.

To express the equation in the form x = ay^2 + by + c, we need to manipulate the equation further.

Rearranging the equation y = 9 - 4√x, we have √x = (9 - y)/4.

Squaring both sides to eliminate the square root, we get x = ((9 - y)/4)^2.

Expanding and simplifying further, we have x = (81 - 18y + y^2)/16.

Therefore, the Cartesian equation for the parametric equations x = t^2 and y = 9 - 4t, expressed in the form x = ay^2 + by + c, is:

x = (81 - 18y + y^2)/16.

The double integral flux is -72π.

We can parameterize the cone as follows:

x = r cosθ

y = r sinθ

z = z

where r is the distance from the z-axis and θ is the angle of rotation around the z-axis.

Then we can calculate the normal vector as follows:

n = (∂x/∂r × ∂y/∂θ)i + (∂y/∂r × ∂x/∂θ)j + (∂z/∂r × ∂z/∂θ)k

= (-r cosθ)i + (-r sinθ)j + (6r/(2√(x^2+y^2)))k

= -r(cosθ i + sinθ j) + 3k/√(x^2+y^2)

Taking the dot product of F with n, we get:

F · n = (5xy)i - 2zk · [-r(cosθ i + sinθ j) + 3k/√(x^2+y^2)]

= -2z(3/√(x^2+y^2)) = -6z/r

Then the flux integral becomes:

double integral_S F · n dS = ∫∫(-6z/r) r dr dθ dz

where the limits of integration are

0 ≤ θ ≤ 2π

0 ≤ z ≤ 6

0 ≤ r ≤ 6√(z^2/36 - 1)

Evaluating the integral, we get:

∫∫(-6z/r) r dr dθ dz = -72π

Therefore, the flux is -72π.

To learn more about  integral :

https://brainly.com/question/27360126

#SPJ11

Using the binomial series formula. The first four terms of the MacLaurin series for 7√(1 + x) are:

7 + (7/2)x - (7/16)x^2 + (21/256)x^3

(a) Using the binomial series formula, we have:

1/(1 + x)^8 = (1 + x)^(-8)

= 1 + (-8)x + (-8)(-9)/2! x^2 + (-8)(-9)(-10)/3! x^3 + ...

Therefore, the first four terms of the MacLaurin series for 1/(1 + x)^8 are:

1 - 8x + 36x^2 - 56x^3

(b) Using the binomial series formula, we have:

7√(1 + x) = 7(1 + x)^(1/2)

= 7(1 + (1/2)x + (-1/8)x^2 + (1/16)x^3 + ...)

Know more about MacLaurin series here:

https://brainly.com/question/31745715

#SPJ11

In a normal distribution, the median is approximately equal to its mean and mode. It means option (a) Approximately equal to is correct.

In a normal distribution, the mean, median, and mode are all measures of central tendency. The mean is the arithmetic average of the data, the median is the middle value when the data are arranged in order, and the mode is the most frequently occurring value. For a normal distribution, the mean, median, and mode are all located at the same point in the distribution, which is the peak or center of the bell-shaped curve.In fact, for a perfectly symmetrical normal distribution, the mean, median, and mode are exactly equal to each other. However, in practice, normal distributions may not be perfectly symmetrical, and there may be slight differences between the mean, median, and mode. Nevertheless, the differences are usually small, and the median is typically approximately equal to the mean and mode in a normal distribution.

Learn more about normal distribution here, https://brainly.com/question/4079902

#SPJ11

The fraction 1/1/6 is equivalent to the whole number 6.

When we write a fraction like 1/1/6, it is important to understand which part is the numerator and which part is the denominator. In this case, the fraction can be written as:

1 ÷ 1 ÷ 6

To simplify this expression, we need to remember that division is the same as multiplication by the reciprocal. So, we can rewrite the expression as:

1 × 6 ÷ 1

Now, we can see that the numerator is 1 times 6, which equals 6, and the denominator is 1. So, we can write the fraction as:

6/1

This fraction can be simplified further by dividing both the numerator and denominator by 1, which gives us:

6/1 = 6

Therefore, the fraction 1/1/6 is equivalent to the whole number 6.

for such more question on whole number

https://brainly.com/question/3617398

#SPJ11

The equation for the horizontal line passing through (3, -1) is y = -1.

The equation for the vertical line passing through (3, -1) is x = 3.

These equations define the lines with a fixed y-value (horizontal line) and a fixed x-value (vertical line) passing through the given point.

The equations for the horizontal and vertical lines passing through the point (3, -1).

Horizontal Line:

A horizontal line has a constant y-value, meaning that all the points on the line have the same y-coordinate.

In this case, since the line passes through the point (3, -1), the y-coordinate is -1.

Therefore, the equation for the horizontal line passing through (3, -1) can be written as:

y = -1

This equation indicates that for any value of x, the y-coordinate will always be -1, resulting in a horizontal line.

Vertical Line:

A vertical line has a constant x-value, meaning that all the points on the line have the same x-coordinate.

In this case, since the line passes through the point (3, -1), the x-coordinate is 3.

Therefore, the equation for the vertical line passing through (3, -1) can be written as:

x = 3

This equation indicates that for any value of y, the x-coordinate will always be 3, resulting in a vertical line.

For similar question on horizontal line.

https://brainly.com/question/30080365

#SPJ11

The series is convergent according to the Alternating Series Test.

To test the series for convergence or divergence, we first need to identify the general term or nth term of the series. In this case, the nth term is given by bn = (-1)ⁿ * n⁷ / 7ⁿ

To evaluate the limit as n approaches infinity of bn, we can use the ratio test:

lim n → [infinity] |(bn+1 / bn)| = lim n → [infinity] [(n+1)⁷ / 7(n+1)] * [7n / n⁷]
= lim n → [infinity] [(n+1)/n] * (7/n)⁶* 1/7
= 1 * 0 * 1/7
= 0

Since the limit is less than 1, the series converges by the ratio test. Therefore, the series is convergent.

To know more about convergentseries  click on below link :

https://brainly.com/question/15415793#

#SPJ11

The value of f(-1, 2, 0, -1) is [tex]-e^2 - 1.[/tex]

To calculate f(-1, 2, 0, -1), we need to substitute these values in the given expression for f(x, y, z, w) as follows:

[tex]f(-1, 2, 0, -1) = (-1)(2)^2(0) - (-1)(-1)^2 - e^2(-1)^2 - (2)^2 - (0)^2 + 2\times (-1)^2[/tex]

Simplifying the expression, we get:

[tex]f(-1, 2, 0, -1) = 0 + 1 - e^2 - 4 + 0 + 2\\f(-1, 2, 0, -1) = -e^2 - 1[/tex]

Therefore, the value of f(-1, 2, 0, -1) is [tex]-e^2 - 1.[/tex]

for such more question on word problem

https://brainly.com/question/1781657

#SPJ11

The total area of the window is 392.5 square inches

From the question, we have the following parameters that can be used in our computation:

The composite figure that represents the window

The total area of the window is the sum of the individual shapes

i.e.

Surface area = Rectangle + Trapezoid

So, we have

Surface area = 20 * 16 + 1/2 * (9 + 20) * (21 - 16)

Evaluate

Surface area = 392.5

Hence, the total area of the window is 392.5 square inches

Read more about area at

brainly.com/question/26403859

#SPJ1

The number 102 in the sequence 8n + 6 is the nearest to 100.

To find the nearest number in the sequence 8n + 6 to 100, we need to determine the value of n that gives us a number closest to 100.

Let's start by setting up an equation:

8n + 6 = 100

To solve for n, we can subtract 6 from both sides of the equation:

8n = 100 - 6

8n = 94

Now, divide both sides of the equation by 8:

n = 94 / 8

n = 11.75

Since n represents a position in the sequence, it must be an integer. Therefore, we need to round 11.75 to the nearest whole number.

The nearest whole number to 11.75 is 12.

So, the nearest number in the sequence 8n + 6 to 100 is when n = 12.

Plugging n = 12 back into the equation:

8(12) + 6 = 96 + 6 = 102

To learn more about sequence here:

https://brainly.com/question/30262438

#SPJ4

The solid bounded by the coordinate planes and the plane 5x + 7y + z = 35 is a tetrahedron. We can find the volume of the tetrahedron by using the formula V = (1/3)Bh, where B is the area of the base and h is the height.

The base of the tetrahedron is a triangle formed by the points (0,0,0), (7,0,0), and (0,5,0) on the xy-plane. The area of this triangle is (1/2)bh, where b and h are the base and height of the triangle, respectively. We can find the base and height as follows:

The length of the side connecting (0,0,0) and (7,0,0) is 7 units, and the length of the side connecting (0,0,0) and (0,5,0) is 5 units. Therefore, the base of the triangle is (1/2)(7)(5) = 17.5 square units.

To find the height of the tetrahedron, we need to find the distance from the point (0,0,0) to the plane 5x + 7y + z = 35. This distance is given by the formula:

h = |(ax + by + cz - d) / sqrt(a^2 + b^2 + c^2)|

where (a,b,c) is the normal vector to the plane, and d is the constant term. In this case, the normal vector is (5,7,1), and d = 35. Substituting these values, we get:

h = |(5(0) + 7(0) + 1(0) - 35) / sqrt(5^2 + 7^2 + 1^2)| = 35 / sqrt(75)

Therefore, the volume of the tetrahedron is:

V = (1/3)Bh = (1/3)(17.5)(35/sqrt(75)) = 245/sqrt(75) cubic units

Simplifying the expression by rationalizing the denominator, we get:

V = 49sqrt(3) cubic units

To learn more about tetrahedron visit:

brainly.com/question/11946461

#SPJ11