The type of reaction that occurs when a student mixes 10 mL of acetic acid and 10 mL of sodium hydroxide in a flask is an acid-base neutralization reaction. This type of reaction involves the transfer of protons (H+ ions) from the acid to the base, forming water and a salt as the products.
18) The initial temperature of the acetic acid is 22 C, and after the sodium hydroxide is added to the flask, the temperature raises to 26 C. This indicates that the reaction is exothermic, meaning that it releases energy in the form of heat. The temperature increase is a result of the energy released during the reaction.
19) The student were to use 50 mL of each chemical instead of 10 mL, it is likely that the temperature would raise by more than 4.07 C. This is because a larger amount of reactants would be present, resulting in a more significant amount of energy being released during the reaction. The exact temperature increase would depend on various factors such as the concentration of the reactants and the specific heat capacity of the flask used. However, it is safe to say that the temperature increase would be greater than what was observed with the 10 mL of each chemical.
In summary, the reaction between acetic acid and sodium hydroxide is an acid-base neutralization reaction. The temperature increase observed in question 18 indicates that the reaction is exothermic. Finally, using a larger amount of reactants in question 19 would likely result in a greater temperature increase than what was observed with 10 mL of each chemical.
To know more about reaction, refer
https://brainly.com/question/25769000
#SPJ11
PLEASE I NEED HELP ASAP!!!!
1.)Alex reacts 40.0 grams of substance X with 850 mL of 1.0 mol/L solution of hydrochloric acid. What is the maximum mass of carbon dioxide gas that could be obtained from this reaction?
2.)Jess reacts 25.0 grams of substance X with 40.0 mL of 2.0 mol/L of sodium hydroxide solution. The reaction yielded 2.5 grams of calcium hydroxide. Calculate the theoretical yield of calcium hydroxide and %Yield for the reaction.
The percent yield of the calcium hydroxide is 84.5%.
What is stoichiometry?Stoichiometry enables us to obtain the mass of a substance form the equation of the reaction.
The equation of the reaction is;
CaCO3 + 2HCl -----> CaCl2 + CO2 + H2O
Number of moles of X = 40.0 grams/100 g/mol = 0.4 moles
Number of moles of HCl = 850/1000 * 1 M = 0.85 moles
If 1 mole of CaCO3 reacts with 2 moles of HCl
0.4 moles of CaCO3 reacts with 0.4 moles * 2 moles/1 mole
= 0.8 moles of HCl
Hence X is the limiting reactant.
The reaction is 1:1 then the amount of CO2 produced is 0.4 moles
Mass of CO2 = 0.4 CO2 * 44 g/mol = 17.6 g
2) The reaction equation is; 2NaOH + CaCO3 ---> Ca(OH)2 + Na2CO3
Number of moles of X = 25.0 grams/100 g/mol = 0.25 moles
Number of moles of NaOH= 40/1000 L * 2 M = 0.08 moles
If 1 mole of X reacts with 2 moles of NaOH
0.25 moles reacts with 0.25 moles * 2 moles /1 mole
= 0.5 moles
NaOH is the limiting reactant
2 moles of NaOH produces 1 mole of CO2
0.08 moles of NaOH produces 0.08 moles * 1 mole/2 moles
= 0.04 moles of CO2
Theoretical yield of CO2 = 0.04 moles of CO2 * 74 g/mol = 2.96 g
Percent yield = 2.5 g/ 2.96 g * 100
= 84.5%
Learn ore about percent yield:https://brainly.com/question/17042787
#SPJ1
Describe the scale used to measure the basicity of a substance. Demonstrate how you could differentiate a weak base from a strong one. (10
points)
Answer:
The pH scale is used to measure the acidity or basicity of a substance.
Explanation:
pH stands for potential hydrogen. It ranges from 0 to 14, 7 being neutral. The pH of water is 7 i.e. it is neither acidic nor basic. 0 to 7 shows acidic behavior while 7 to 14 shows basic behavior.
Experiment:
Dip the pH paper in the liquid and wait for ten seconds. The pH strip starts to discolor.
For a strong acid the strip will turn red.
For a weak acid the strip will become pale red.
To find the correct pH value we can compare it with the indicator scale present on the pH scale box.
The scale used to measure the basicity of a substance is called the pH scale.
What is the pH scale?The pH scale is a logarithmic scale that ranges from 0 to 14 and is used to determine the acidity or basicity of a solution. A pH value of 7 is considered neutral, values below 7 are acidic, and values above 7 are basic.
To differentiate a weak base from a strong one, you can perform the following experiments:
pH Measurement: Measure the pH of the solution containing the base using a pH meter or pH indicator paper. A strong base will have a higher pH value, typically around 12-14, indicating a highly basic solution. A weak base will have a lower pH value, closer to 7, indicating a less basic or slightly basic solution.
Conductivity Test: Dissolve a small amount of the base in water and measure its electrical conductivity using a conductivity meter. Strong bases are good electrolytes and will conduct electricity well, resulting in a high conductivity. Weak bases, on the other hand, are poor electrolytes and will exhibit lower conductivity.
Reaction with Acids: Add a few drops of a strong acid, such as hydrochloric acid (HCl), to a solution containing the base. Strong bases will rapidly and completely neutralize the acid, resulting in a significant increase in pH. Weak bases, however, will only partially neutralize the acid, leading to a smaller increase in pH.
Learn more about pH scale at:
https://brainly.com/question/1433865
#SPJ2
What are the correct half reactions for the following reaction:
Zn + 2 HCI -> H₂ +zncl2
Answer:
Zn(s) + 2H+(aq) => Zn²+(aq) + H2 (g)
Explanation:
The equation Zn + 2 HCI -> H₂ +zncl2 on reduction and oxidation, it results as below;
2H+ + 2e- => H2 ; reductionZn => Zn²+ + 2e- ; oxidationThe equations above are half cell.
On combination of the above half cell reaction equations gives;
Zn(s) + 2H+(aq) => Zn²+(aq) + H2 (g).
Therefore, the half reaction equation for Zn + 2 HCI -> H₂ +zncl2 is given by;
Zn(s) + 2H+(aq) => Zn²+(aq) + H2 (g).
Draw an atomic structure of Sodium (Na). What are sub-atomic particles?
Sodium represents by the (Na).
Which solution could be used to precipitate the calcium ion form a water sample?
Calcium carbonate ([tex]CaCO_{3}[/tex]), an insoluble precipitate that could be removed from water by filtration, is created when the calcium ion in hard water bonds with the carbonate ion.
Precipitates may be ionic solids that are insoluble and result from reactions between certain cations as well as anions in water. A precipitate's formation could be influenced by a variety of circumstances.
When calcium atoms gain or lose electrons, they change their charge but also reactivity, forming calcium ions.
Therefore, Calcium carbonate ([tex]CaCO_{3}[/tex]), could be used to precipitate the calcium ion form a water sample
To know more about calcium ion and precipitate
https://brainly.com/question/18109776
#SPJ4
H. If you had 64 amu of ch4, how many molecules would this be? i. If you had 64 g of ch4, how many moles would this be?
The number of molecules and number of moles of [tex]CH_{4}[/tex] is 4 moles and 24.088×[tex]10^{23}[/tex] molecules.
Calculation,
Atomic mass of carbon is 12 u and H is 1 u
So, molar mass of [tex]CH_{4}[/tex] = 12 + 1×4 = 16 u = 16 g/mole
Number of moles = given mass / molar mass = 64 g/ 16 g/mol = 4 moles
1 moles of substance contains 6 .022 ×[tex]10^{23}[/tex] molecules.
So, number of molecules in 3 moles of methane = 4×6.022 ×[tex]10^{23}[/tex]
number of molecules in 3 moles of methane = 24.088×[tex]10^{23}[/tex] molecules.
learn about moles
https://brainly.com/question/26416088
#SPJ4
What component(s) of msa make(s) this media selective? choose all correct answers: a. phenol red b. agar c. mannitol d. sodium chloride
The component(s) of msa make(s) this media selective for sodium chloride.
MSA is a medium which has both differential as well as selective properties. The distinguishing feature is the high salt content (7.5%). On just this high salt concentration, Staphylococcus species, which frequently inhabit human skin, can develop.
Streptococcus species, however, have their growth inhibited by the high salt content of the agar. Mannitol, a sugar, would be the MSA's unique component.
Resulting in high salt concentration, the sodium chloride in MSA ensures that only Staphylococci species survive. All more gram-positive bacteria are thereafter destroyed.
Therefore, the correct answer will be option (d).
To know more about MSA
https://brainly.com/question/6546697
#SPJ4
HELP PLEASE!!!!!
2. To test for the presence of substance X, a lab assistant,
Alex, treats a sample of the material with hydrochloric acid.
Bubbles of carbon dioxide gas are observed and collected
during the test reaction. Write a balanced chemical equation
for the reaction.
3. Another lab assistant, Jess, disagrees with Alex, and treats
a sample of substance X with sodium hydroxide. One of the
products of this reaction is a compound called milk of lime
(found to be only slightly soluble in water). Write a balanced
chemical equation and identify the type of reaction taking
place.
4. Which lab assistant is performing a valid test for substance
X? Explain your answer, including a prediction of what would
be observed during a positive test. HINT: Research what is the
valid test for substance X. At this point you should know the
identity of substance X (you found it in Question #1).
62%
(2.) A lab assistant Alex test for the presence of X, the balanced chemical equation is CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O. (3.) Another lab assistant perform the test, the balanced chemical equation is CaCO₃ + 2NaOH → Ca(OH)₂ + Na₂CO₃. (4.) The Substance X is Calcium carbonate.
What is Balanced Chemical Equation ?The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.
(2.) To test for the presence of substance X, a lab assistant, Alex, treats a sample of the material with hydrochloric acid. Bubbles of carbon dioxide gas are observed and collected during the test reaction.
The balanced chemical equation is
CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O
(3.) Another lab assistant, Jess, disagrees with Alex, and treats a sample of substance X with sodium hydroxide. One of the products of this reaction is a compound called milk of lime (found to be only slightly soluble in water).
The balanced chemical equation is
CaCO₃ + 2NaOH Ca(OH)₂ + Na₂CO₃
The type of reaction is Double displacement reaction
(4.) The lab assistant Alex perform the valid test for substance X because it gives effervescence of bubbles. The substance X is calcium carbonate. When calcium carbonate react with dilute HCl then carbon dioxide gas bubbles is present in it.
Thus from the above conclusion we can say that (2.) A lab assistant Alex test for the presence of X, the balanced chemical equation is CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O. (3.) Another lab assistant perform the test, the balanced chemical equation is CaCO₃ + 2NaOH → Ca(OH)₂ + Na₂CO₃. (4.) The Substance X is Calcium carbonate.
Learn more about the Balanced chemical equation here: https://brainly.com/question/26694427
#SPJ1
Question 21 of 50
2 points
we would use the elements listed on the bottom of the reactivity list for all of the following except
_______.
a. pans for cooking and baking
b. jewelry
c. fireworks
d. water pipes in the house
The elements listed on the bottom of the reactivity list for all of the following except fireworks and is denoted as option C.
What is Reactivity?This is referred to the extent in which an element is able to take part in a chemical reaction.
The elements founds at the bottom of the reactivity list include gold which can't be used for making fireworks.
Read more about Reactivity here https://brainly.com/question/18090753
#SPJ1
A welding torch requires 4122.8l of ethylene gas at 0.64 atm what will be the pressure of the gas if ethylene is supplied by a 51.6 l tank
The pressure of the gas if ethylene is supplied by a 51.6 l tank is 51.1355atm
The final pressure of the gas can be calculated by using the formula given by Boyle's law,
P1V1 = P2V2
What is Boyle's law?
Boyle's law relates the compression and expansion of gas at a constant temperature. It states that, At constant temperature the pressure exerted by a gas is inversely proportional to the volume of the given mass of gas.
P1V1 = P2V2
where,
P1 is the initial pressure
V1 is the initial volume
P2 is the final pressure and
V2 is the final volume.
Given data:Initial volume V1= 4122.8L
Initial pressure P1= 0.64atm
Final volume V2= 51.6L
Final pressure P2= ?
0.64*4122.8= P2*51.6
P2= 2638.592/51.6
P2= 51.1355atm
Hence the final pressure of the gas is 51.1355atm
Learn more about Boyle's law on
https://brainly.com/question/1696010
#SPJ1
The protein--iron compound that has the bonding capabilities for the transport of oxygen and carbon dioxide is:
It is hemoglobin.
What is hemoglobin and its composition?In the red blood cells (erythrocytes) of vertebrates, hemoglobin, an iron-containing protein, transports oxygen from the lungs to the body's tissues and organs and returns carbon dioxide to the lungs. In a complete blood cell (CBC) test, the amount of hemoglobin in the blood is often measured.
A globin group is surrounded by four heme groups, which together form a tetrahedral shape in each hemoglobin molecule. Heme is an organic complex known as a porphyrin that has an iron atom linked to it. Heme makes up only 4% of the weight of the molecule. As the blood circulates between the lungs and the tissues, the iron atom is what holds oxygen in place. Each hemoglobin molecule contains four iron atoms, and as a result, it has the capacity to bind four oxygen molecules. Two linked pairs of polypeptide chains make up globin.
Learn more about hemoglobin here:
https://brainly.com/question/12681891
#SPJ4
At the stoichiometric (equivalence) point in a titration of benzoic acid with naoh(aq) shown by equation 3, the ph is:_______
Benzoic acid is one of the weakest acid for titration. The pH of the salt solution generated is the pH greater than 7( >7 ) at the equivalence point in any titration.
The benzoate anion, combines with water to create OH- and undissociated benzoic acid. This reaction is stronger than OH-. As a result of the hydroxide ions generated by this reaction, the final solution has a pH greater than 7. Hydrolysis is the term for an ion's reaction with water, such as the benzoate ion.
What is titration?A titration is a method for figuring out the concentration of an unknown solution by using a solution with known concentration.Until the reaction is finished, the titrant (the known solution) is typically added from a buret to a known volume of the analyte (the unknown solution).The concentration of the unknown can be determined by knowing the amount of titrant that was added. An indicator is frequently used to indicate the reaction's endpoint or end of the reaction.Know more about titration numerical https://brainly.com/question/14501686
#SPJ4
Can someone fill this out pleaseee for me
Filling out the table below following the outlined order:
Calcium - symbol = Ca; Group =2; Period = 4; Ar = 134; Am =40.078u; Ph = solid; Density = 1.55; Bp = 1757K; Mp = 1115K.Vanadium - symbol = V; Group =5; Period = 4; Ar = 197; Am =50.9415u; Ph = solid; Density = 6.11; Bp = 3680K; Mp = 2183K.Manganese - symbol = Mn; Group =7; Period = 4; Ar = 127; Am = 54.938044u; Ph = solid; Density = 7.21; Bp = 2334K; Mp = 1519K.Cobalt: - symbol = Co; Group =9; Period = 4; Ar = 125; Am =58.933195 u; Ph = solid; Density = 8.90; Bp = 3200K; Mp = 1768K.Zinc: - symbol = Zn; Group = 12; Period = 4; Ar = 134; Am =65.38 u; Ph = solid; Density = 7.14; Bp = 1180K; Mp = 692.68K.Arsenic: - symbol = As; Group = 15; Period = 4; Ar = 197; Am = 74.9216 u; Ph = solid; Density = 5.75; Bp = 889K; Mp = 889K.Bromine: - symbol = Br; Group =17; Period = 4; Ar = 120; Am = 79.904 u; Ph = Liquid; Density = 3.1028; Bp = 332K; Mp = 265K.Meaning of ElementAn element can be defined as a substance that can not be broken down into simpler substances.
An element serves as a building blocks for compounds and mixtures.
In conclusion, each element and its property as requested in the table are given above.
Learn more about element : https://brainly.com/question/18096867
#SPJ1
An oil separates crude oil into its components by distillation. some compoents are altered:______
An oil separates crude oil into its components by distillation. some components are altered by cracking and Reforming.
The crude oil contains many petroleum products like petrol , diesel , Mobil oil coaltar and many more with impurities So, now it is very important to separated it into components to use all product individually in pure form.
The separation process are based on fraction distillation because all petroleum products have different density and boiling points. All products are separated at different temperature.
learn about distillation
https://brainly.com/question/13345735
#SPJ4
please help me with this question
From the calculation, the concentration in parts per billion is 6 ppb.
What is ppb?The term ppb refers to the concentration of a substance in parts per billion. We obtain the ppb using the formula;
Mass of solute/ Mass of solution * 10^9
Now, 1L = 1000cm^3 = 1000 g
The concertation in ppb = 6 * 10^-6 g/1000 g * 10^9
= 6 ppb
Learn more about parts per billion:https://brainly.com/question/9179966
#SPJ1
A generic element, Q, has two isotopes, 195Q and 190Q, and an average atomic mass of 191.86 amu. The natural abundances of the two isotopes are 38% 195Q and 62% 190Q. The isotopic mass of 195Q is 194.96 amu. What is the isotopic mass of 190Q
A generic element, Q, has two isotopes, 195Q and 190Q, and an average atomic mass of 191.86 amu. The natural abundances of the two isotopes are 38% 195Q and 62% 190Q. The isotopic mass of 195Q is 194.96 amu. the isotopic mass of 190Q is 186.80.
What do you mean by Isotopes?Isotopes are two or more atom types that share the same atomic number (number of protons in their nuclei), location in the periodic table, and chemical element but have distinct nucleon numbers (mass numbers) as a result of having a different number of neutrons in their nuclei. Although the chemical properties of each isotope of a given element are nearly identical, they differ in their atomic weights and physical characteristics.
191.86 =(62% x 194.96 + 38% x X )
where, X is the mass of other Isotope.
X = (191.86 - 120.8752)/0 .38
= 186.80
Parent and Daughter IsotopesThe initial radioisotope and the isotope that results from radioactive decay may not be the same. The atoms created by the reaction are known as daughter isotopes, whereas the original isotope is known as the parent isotope. It's possible to get different kinds of daughter isotopes.
As an illustration, the uranium atom is the parent isotope and the thorium atom is the daughter isotope when U-238 decays into Th-234.
Learn more about Isotopes here:-
https://brainly.com/question/27407210
#SPJ4
Predict the nature of the indicated
covalent bond.
H
H
polar
H-C
H
-C-H
H
non-poiar
Answer:
Non-polar
Explanation:
Non-polar bonds occur when the electrons in a covalent bond are equally shared between the two atoms.
The indicated bond is most likely non-polar because the two atoms are identical (both carbons). In addition, these two carbons are balanced (their other bonds are identical). This means there is no reason for the electrons in the bond to be pulled in any particular direction.
What is the purpose of a signal phrase?
6.01 formation of the solar system
Answer: The purpose is to analyze the speed of planets around a central star.
Explanation: using variables
Draw the major 1,2- and 1,4-addition products that form as a result of the following reaction between one equivalent each of 2,4-hexadiene and HBr.
The major 1,2- and 1,4-addition products are 4-Bromo-2-hexene and 2-Bromo-2-hexene.
What is Markovnikov Rule ?
Markovnikov rule explains that in addition reaction of alkene react with a hydrogen halide. The hydrogen atom is attached to the carbon atom that is already bonded to the greatest number of hydrogen.
What is Addition Reaction ?An addition reaction is an organic reaction occur when two or more molecules combine to form a larger molecule without the loss of any atoms present in reactant.
Thus from the above conclusion we can say that The major 1,2- and 1,4-addition products are 4-Bromo-2-hexene and 2-Bromo-2-hexene.
Learn more about the Markovnikov Rule here: https://brainly.com/question/21496002
#SPJ1
The mass of solute per 100 mL of solution is abbreviated as (m/v). Mass is not technically the same thing as weight, but the abbreviation (w/v) is also common. How many grams of sucrose are needed to make 655 mL of a 40.0% (w/v) sucrose solution
The mass of solute per 100 mL of solution is abbreviated as (m/v). Mass is not technically the same thing as weight, but the abbreviation (w/v) is also common. 262 grams of sucrose are needed to make 655 mL of a 40.0% (w/v) sucrose solution
Define SoluteA solute is a material that dissolves in a solution. The amount of solvent present in fluid solutions is greater than the amount of solute. The two most common examples of solutions in daily life are salt and water. Salt is the solute because it dissolves in water.
forms of ratios for product concentration or yield:-w/v:- Weight by volume or weight per volume are the terms used. Any solid compound's concentration in a liquid can be calculated using it. It is measurable in gm/ml.Weight by weight ratio is referred to as w/w.It is employed to determine the final yield of the compound obtained from the starting compound. as in —mg/—gm.It provides the real yield of the substance or item.
Volume/volume. It is used to specify a liquid's composition or percent in a liquid compound.using w/v we can calculate the weight of sucrose:-
40.0% means 40 g sucrose/ 100 g solution
40.0g sucrose x (655/100)=grams of sucrose
262 grams of sucrose are needed to make 655 mL of a 40.0% (w/v) sucrose solution.
Learn more about Solute here:-
https://brainly.com/question/14397121
#SPJ4
How does the energy of an electorn change when the electron moves closer to the nucleus?
Answer:
when an electron move closer to the nucleus the magnitude of energy of the nucleus increases
7. A spontaneous reaction occurs when the sign of free energy IS
O A. positive.
O B. zero,
• C. negative.
O D. neutral.
Answer:
positive
Explanation:
The main acid in the stomach is hydrochloric acid (HCl). Which chemical equations show a reaction that occurs when someone takes an antacid
Answer:
Mg(OH)2(s) + 2HCl(aq) => MgCl2(aq) + 2HCl(l)
Explanation:
The reaction that occurs in the stomach when one takes an antacid {Mg(OH)2} is termed as Neutralization reaction as it reacts with hydrochloric acid to form magnesium hydroxide and water.
The equation of reaction:
Mg(OH)2(s) + 2HCl(aq) => MgCl2(aq) + 2HCl(l)
(a) List any four properties of colloidal and mention any two properties in which colloids differ from suspension. (b) State what is Tyndall effect? Which of the following solution will show Tyndall effect? Starch solution, sodium chloride solution, tincture iodine, air, milk
Explanation:
(1) they are heterogenous mixture
(2) the size of particles of colloids is too small to be seen by bare eyes.
(3) they scatter light passing through them making it's path visible.
What is rusting? Write its chemical equations.
[tex] \huge \quad\quad \underline{ \tt{{Answer}}}[/tex]
Rusting of iron is the most familiar example of corrosion. It is a process in which an iron reacts with atmospheric oxygen and moisture to form a reddish brown substance iron oxide, which is commonly known as rust.
[tex] \: \: \: \: \: \: \: \: \: \: \: \: [/tex]
[tex]\blue{ \star}:[/tex][tex] \sf4fe+ 3O_2+ XH_2O→ 2Fe_2O_3.XH_2O[/tex]
Answer:
Rust is an iron oxide, formed by iron and oxygen reacting in the catalytic presence of water or air moisture. Rusting is an oxidation reaction. This means it involves oxygen reacting with something (in this case, iron in the presence of moisture).
The chemical formula for rusting:
4Fe + 3O2 + 6H2O → 4Fe (OH)3
Hope this helps!
- profparis
In a mining community, groups of dead fish appear in a local river every few weeks. These fish kills coincide with incidents of mining waste dumped into the river. Which of the following components is an abiotic factor causing these fish kills?
Human activities
Biodiversity in the river
Water pollution
Overfishing
In a mining community, water pollution kills the fish in local river.
How does mining affect the rivers?Large amounts of water are frequently used in mining, which has the potential to contaminate local groundwater, rivers, streams, and other water sources. A community's ability to grow its own food may be hampered by mining since it consumes grazing or agricultural land and pollutes the soil and the environment.
Metals that leach from the rock also contaminate nearby water sources when they do so. chemical processing pollution: When minerals are extracted from their ores using cyanide or sulfuric acid and water, the runoff pollutes the rivers in the area.
Through erosion and sedimentation, dewatering of wetlands, diverting and channelizing streams, and poisoning surface water and aquifers with harmful chemicals, surface mining can have an impact on fish and aquatic resources.
Learn more about mining here:
https://brainly.com/question/24108124
#SPJ1
Answer:
a
Explanation:
The combustion reaction of propane is described by the reaction.
C3H8 +502 + 4H₂O + 3C0₂.
How many moles of O₂ are required to generate 3 moles of CO₂?
Answer:
[tex]\huge\boxed{\sf 5\ moles\ of\ oxygen}[/tex]
Explanation:
Chemical Reaction:[tex]C_3H_8+5O_2 \longrightarrow 4H_2O+3CO_2[/tex]
From the reaction, we can say that,
1 mole of propane and 5 moles of oxygen produce 4 moles of water and 3 moles of carbon dioxide.So, to generate 3 mole of carbon dioxide, 5 moles of oxygen are required. (as shown in the chemical reaction!)
[tex]\rule[225]{225}{2}[/tex]
The combining power of an element is called ?
A. coefficient
B.subscript
C.periodicity
D.valence number
Answer:
D
Explanation:
Valency is the combining power of an element
Which law states that the total pressure of a gas mixture is equal to the sum of the partial pressures of its individual gases?.
Dalton's law of partial pressures states that the total pressure of a gas mixture is equal to the sum of the partial pressures of its individual gases.
What is partial pressure?Partial pressure is defined as the pressure exerted by individual gas constituents that makes up a mixture of gases.
According to Dalton's law of partial pressures which states that the total pressure by a mixture of gases is equal to the sum of the partial pressures of each of the constituent gases.
This can be represented mathematically by the following:
P = P1 + P2
Where P = total pressure
P1 = partial pressure of gas 1
P2 = partial pressure of gas 2.
Learn more about gas laws here:
https://brainly.com/question/15990970
#SPJ1
Which of the following can easily form an ionic bond with a cation?
Sr
Ne
NH4+
PO43–
PO43- can form an ionic bond with a cation.
The chemical species which can easily form an ionic bond with a cation will be.
The definition of an ionic bond is a chemical bond that is formed between two ions that have opposite charges.
An Ionic bond is formed when one atom gives up one or more electrons to another atom.
These bonds can easily form between a pair of atoms or between molecules. This kind of bonding is most widely seen in bonds present in salts.
Compared to other options given, is the best option as the total number of 32 valence electrons, is the highest among the given choices. Its tendency to form ionic bonds with the other cation is much higher as compared to others.
P has 5 electrons which combine with 4 O atoms which have 6 lone pairs and a -3 charge on it, which means it is accepting 3 electrons so it will be (+3), so total valence electrons will be 5 + 6 (4) + 3 = 32.
For detailed study about cation refer given link https://brainly.com/question/14309645.
#SPJ1.