to find the focal length of a mirror or lens where should the light source be located

Answers

Answer 1

To find the focal length of a mirror or lens, the light source should be located at a distance greater than or equal to the focal length. When light rays pass through a converging lens or reflect off a concave mirror, they converge at a point called the focal point.

The distance between the focal point and the lens or mirror is known as the focal length. To measure the focal length accurately, the light source should be placed at a distance greater than or equal to the focal length.  Placing the light source closer than the focal length would result in a diverging beam of light, making it difficult to measure the focal length accurately.

On the other hand, placing the light source further than the focal length would cause the light rays to converge at a point beyond the measuring apparatus, again making it difficult to determine the focal length. Therefore, the light source should be located at a distance equal to or greater than the focal length for accurate measurement.

To know more about distance visit

https://brainly.com/question/15172156

#SPJ11


Related Questions

what is biodiversity​

Answers

Answer:

Biodiversity is the variety and variability of life on Earth. Biodiversity is typically a measure of variation at the genetic, species, and ecosystem level. Terrestrial biodiversity is usually greater near the equator, which is the result of the warm climate and high primary productivity.

Explanation:

hope it helped <3


2. True or False: Molecules always vibrate at the same speed??

Answers

Answer:

False

Explanation:

There are 3 states of matter, and all states have molecules. These molecules vibrate in different speeds, depending on the mass, weight, and stae off matter of the object.

Where do you weight more on top of Mt. Everest (Highest Mt. in the world) or at the beach

They are the same

Mt Everest

The beach

Not enough information

Answers

You weigh slightly more at the beach than on top of a mountain, because at the beach, you're closer to the center of the Earth.

Which element has the same number of valence electrons as rubidium.
A. lithium
B. argon
C. calcium
D.iron

Answers

To know if elements have the same number of valence electrons you can look at what group they are in on the periodic table. Rubidium (Rb) is in group one which means it will have the same number on valence electrons as Lithium (Li) because Lithium is also in group one on the periodic table. I hope this helps!!

Can u please help mee?
1 Calculate the momentum in each of these cases.
a A car of mass 1000 kg traveling at 31.6 m/s
b A train with a mass of 120 000 kg and a velocity of 40 m/s (about 90 mph)

Answers

Answer:

a

Explanation:

aaajsjdndndnjxjzkskdjawuj

What is linear expansivity?​will receive brainliest if answered correctly​

Answers

Answer:

Linear expansivity is the fractional increase in length of a specimen of a solid, per unit rise in temperature. If a specimen increases in length from l1 to l2 when its temperature is raised θ°, then the expansivity (α) is given by: l2 = l1(1 + αθ). This relationship assumes that α is independent of temperature. This is not, in general, the case and a more accurate relationship is: l2 = l1(1 + aθ + bθ2 + cθ3…), where a, b, and c are constants.

l2 = l1(1 + αθ).

l2 = l1(1 + aθ + bθ2 + cθ3…),

Answer:

Linear expansivity is the fractional increase in length of a specimen of a solid, per unit rise in temperature. ... Superficial expansivity is the fractional increase in area of a solid surface caused by unit rise in temperature, i.e. A2 = A1(1 + βθ), where β is the superficial expansivity.

I hope it's helpful!

in which of the following is the molecules of water moving fatest A. stream. B. ice. C. ice water mixture. d. water.​

Answers

Answer:

steam

Explanation:

particles move faster in a gas than in a liquid or solid

A 98N weight is lifted to a height of 4m. What is its potential energy at this position?

Answers

Answer:

i need points

Explanation:

if the charge of the force is doubled would the force double

Answers

Answer: The electrostatic force between two point charge particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. So, if you double the individual charges while keeping the same distance, the net electrostatic force will be four times the previous value.

Explanation:

Since, we know

F = (k×q1×q2)/r²

When the charges are doubled, we have :

F' = (k × 2q1 × 2q2)/r²

F' = 4 (k×q1×q2)/r²

Thus,

F' = 4F

Hence, the force becomes 4 times its initial value.

pls help i’ll give brainliest if you give a correct answer!!

Answers

Answer: the last one

Explanation:

Answer:

C

Explanation:

What does attributed mean

Answers

Answer:

attribute is defined as a quality or characteristic of a person, place, or thing

Explanation:

Answer:

regard something as being caused by (someone or something).

Explanation:

Online dictionary

Which model would best demonstrate the role of gravity in the Solar System? O A. a large ball with 8 smaller balls arranged around it because gravity is between the sun and 8 planets O B. a magnet drawn close to another magnet because planets are dbvn towards the magnetism of the Sun O c. a football field with a pea at one end and a grain of sand at the other because the scale of gravity is large O D. a ball attached to a string moving in a circular motion because the string keeps the ball in place like gravity​

Answers

Option D would be the correct answer

ordinary kriging method assume that​

Answers

ears

Explanation:

I want to eat your ears

b) Include this table on your slide:
Mass of Object 1 Mass of Object 2 (kg)
(kg)
Gravitational Force
(N)
1 x 1020
1 x 1020
1 x 1040 G
3 x 1020
1 x 1020
3 x 100 G
2 x 1020
2 x 1020
4 x 10"G
20
3 x 1020
4 x 10
12 x 10 G
c) Use the table to explain how the masses of Objects 1 and 2 relate to the gravitational force
between them. Be sure to:
Describe the scenario.
Explain the table headings to introduce the data in the table.
Use the data to show a trend.
Summarize the information from the table in a sentence, showing the relationship between
the masses of objects and the gravitational force between the objects.
d) Place text in the notes section below the slide explaining the information presented on it. This text
will act as the script for your presentation.
e) Remember to save your work.

Answers

Answer:

hryrbrhrururjrn djbrr he dvhd the ry rhr

urur

Explanation:

jrurhr dye dhrb the yd rhd due sh dgd eye rh

Answer:

I dont know i was looking for the same answer for my project

Explanation:

Anyone knows this ???

Answers

Answer:

JUST A MINUTE KAPENG MAINIT

A ball dropped and accelerates downwards at a rate of 10m/s^2 for 15 seconds how much will the balls velocity increase

Answers

Answer:

v = 150 m/s

Explanation:

Given that,

The acceleration of the ball, a = 10 m/s²

Time, t = 15 s

We need to find the increase in ball's velocity. When it is dropped its initial velocity is equal to 0. Let v be the velocity,

v = u+at

v = 0 +10(15)

v = 150 m/s

So, the ball's final velocity is 150 m/s.

True or false: Everything in the universe works with harmony because of balanced energy

Answers

Answer:

Explanation:

True

Answer:

True..................

An object completes 2500 cycles in
26s. The radius of motion is 3.5m.

Answers

Answer:

That statement is correct.

Explanation:

An object that completes 2500 cycles in 26 seconds has a radius of motion of 3.5.

A car drives 40 km due east and then 50 km due west .what is the cars overall displacement?

Answers

Answer:10 km westExplanation:he go 40 east then 50 west 50-40 is 10 so he displaces 10 km and as west is more than east in terms of km so we will say that it's 10 km west pls mark as brainliest thanks

The car's overall displacement if, A car drives 40 km due east and then 50 km due west is 10 km in the west.

What is displacement?

Displacement is defined as the overall alteration of an object's location and motion direction. Displacement is recognized as a vector quantity since it takes into account both the direction of the motion and the magnitude of the changing position. Displacement may be zero, positive, or negative.

Given:

A car drives 40 km due east and then 50 km due west,

Consider the west direction as positive and the east direction as negative, then,

The displacement = Displacement in the west + displacement in the east,

The displacement = 50 - 40

The displacement = 10

As the sign is positive, then the direction would be west.

Thus, the displacement of the car is +10 km.

To know more about displacement:

https://brainly.com/question/11934397

#SPJ2

If there is zero total force acting on the refrigerator, the refrigerator would

A) slow down
B) speed up
C) remains the same speed
D) slow down, change direction and then speed up going the other way
E) remains at the same speed, but changes direction

Answers

Answer:

c

Explanation:

this is because newton's first law of motion states that every object will continue in its state of rest or uniform motion in a straight line unless a resultant force acts on it

so if the resultant force on the refrigerator is 0N, but it was initially moving, it will continue in its motion in a straight line.

it will not change direction since it will continue in its uniform motion.

hope this helps

please mark it brainlistt

10 POINTS and WILL MARK AS A Brainlest PLEASE

Answers

Answer:

240 cm/sec

Explanation:

The speed line is closest to 240sec at 60cm.

Hope this helps! :)

240 cen/ sec :)))))

A force of 100 N will exert the greatest pressure on an area of

Answers

Answer:

It will apply the greatest pressure of an area of 1.

Explanation:

To find pressure use the formula P = F/A

P = 100/1

P = 100

Answer:

10 N / cm^2

Explanation:

The Formiula is P = F / A

P = presure

F = Force in Newtons

A = area.

The answer is the smaller the area the larger the pressure.

The smallest area you have given us is 10 cm^2

The Pressure = 100N / 10 cm^2

Pressure = 10 N/cm^2  

Note: the units are not exactly standard units, but I've given the answer the way the question offers the units.

A crate is sliding on the floor. If there is a total force acting on the crate in the same direction as it is sliding, the crate would
A) slow down
B) speed up
C) remains the same speed
​​​​​​​ D) slow down, change direction and then speed up going the other way,
E) remains the same speed but changes direction

Answers

But we do not know whether the force is pushing or pulling (the same direction (both forces are parallel) but: .........[ ]<-F-- or .......[ ]--F-->). I suppose the correct answer is B

A 615 watt refrigerator runs 24 hours/day. How much energy is used per month (30 days)?

Answers

Answer:

14.76

Explanation:

If you put it in the calculator it would show

lab number 14: sudden stops hurt newtons first law

Answers

Answer:

you want to know newtons first law here.

Explanation:

An object that is at rest stays at rest or stays in motion.

Can anyone help in physics plz

Answers

Answer:

The answer is B. 8000.

Explanation:

She gained 10,000J , but when she reached the bottom she was at 2,000J. All you need to do is 10,000-2,000 and you get 8,000. So the answer is 8,000J.

A vehicle of mass 3200kg moving with a velocity of 10m/s increases it's velocity to 20m/s in 5 sec. calculate the magnitude of the force exerted on the engine​

Answers

Answer:

xitxutdtidtiittieitetdtdt

Answer:

Please find the attached file

Explanation:

A rubber stopper, which has a mass of m = 14.5 grams, is tied to the end of a string which is threaded through a glass tube. You then spin the rubber stopper about your head in a horizontal circle as shown to the right. The stopper sags  = 18.0o below the horizontal as shown and the distance from the top of the tube to the stopper is L = 1.25 m.
b. What will be the magnitude of the centripetal force acting on the stopper?
c. What is the speed of the stopper?
d. What is the tension in the string?
e. How much Mass M is hanging on the end of the string?

Answers

Answer:

T cos18=mv^2/1.25cos18

T sin18=mg

solve for T

centripetal force-=Tcos18

Match each word to it's correct meaning.
1. conduction
A.resistance to motion between two objects in contact
2. convection
B.something that will flow
3. fluid
C.measure of how much heat energy a substance has
4. friction
D.transmission of heat by the transferring of energy from one particle to another
5. temperature
E.transfer of heat by the motion of the particles of a gas or fluid

PLS PLS PLS NEED HELP ONLY HAVE A LITTLE BIT TILL I HAVE TO SHOW ME PARENTS ME GRADES AND I CANT HAVE ANYTHING OVERDUE

Answers

Answer:

you know the answer i answered it before on a question 0-0

Explanation:

Will the gravitational force between 2 objects increase or decrease if the distance between them decreases.

Answers

Answer:

increase

Explanation:

The formula for the gravitation for of attraction is:

[tex]F = \dfrac{Gm_1m_2}{r^2}[/tex]

It implies that the force of attraction is inversely proportional to the square of the distance. i.e.

[tex]F \infty \dfrac{1}{r^2}[/tex]

where;

G = gravitational constant

m = mass; &

r = distance between the two objects.

Now let's assume that the distance between is reduced from 1 to half;

Then:

[tex]F \infty \dfrac{1}{\Big (\dfrac{r}{2} \Big)^2}[/tex]

[tex]F \infty \dfrac{4}{r^2}[/tex]

Thus, the new gravitational force of attraction increased by a factor of 4.

Other Questions
T/F the transition from period 2 straight pi to an arbitrary period p equals 2 l is only possible if f is a trigonometric function. Find the empirical formula of a compound found to contain 26.56 potassium, 35.41hromium, and the remainder oxygen Based on the data in the graph, which of the following best identifies the reproductive strategy of harbor seals?A) K-selectedB) R-selectedC)Type 2 SurvivorshipD) Type 3 Survivorship water testing involves opening all outlets except for the vents above the roof. Express the confidence intervalleft parenthesis 0.008 comma 0.096 right parenthesis(0.008,0.096)in the form ofModifyingAbove p with caret minus Upper E less than p less than ModifyingAbove p with caret plus Upper EpE senior citizens are not likely to be a major political force in the twenty-first century.T/F how do the misrepresentations of the biological activities of the egg and sperm provide and support an ideological basis for gender stereotypes and inequality? What would be the most logical first step for solving this quadratic equation?x+2x+13= -8OA. Take the square root of both sidesB. Add 8 to both sidesOC. Divide both sides by xD. Subtract 13 from both sidesSUBMIT the thick distribution of hot gasses and stars surrounding the center of a galaxy is called the galactic _________. A company making tires for bikes is concerned about the exact width of their cyclocross tires. The company has a lower specification limit of 19. 930 mm and an upper specification limit of 20. 070 mm. The standard deviation is 0. 18 mm and the mean is 20. 000 mm. A. What is the process capability index for the process? (Round the answer to 5 decimal places. ) b. The company now wants to reduce its defect probability and run a "six-sigma process. " To what level would they have to reduce the standard deviation in the process to meet this target? (Round the answer to 5 decimal places. ) Has identified a species from the West Coast of the United States that may have been the ancestor of 28 distinct species on the Hawaiian Islands. What is this species? Water flows steadily at a rate of 0.020f/s through the 0.75 -in-diameter galvanized iron pipe system shown below. The tee (branch flow) is threaded, the elbow or 90 smooth bend is threaded, and the reducer has a loss coefficient of 0.15 . The kinematic viscosity of water is 1.21(10) 5f/s. Your boss suggests that friction losses in the straight pipe sections are negligible compared to losses in the threaded elbows and fittings of the system. Do you agree or disagree with your boss? Support your answer with appropriate calculations. What are the major and minor losses? melodies that we usuallly call happy, are in what type of key in jazz? Which is an appropriate unit for a flow rate?O Orders per dayO CurrencyO CustomersO Centimeters what method can you use to remove spaces from the beginning and end of a string? an office holder who represents the will of those who elected him/her and acts in constituents expressed interests is known as: Mi familia y yo vamos a visitar la ciudad de Quito en Ecuador por primera vez en cinco aos y estoy muy emocionado de visitar a mis abuelos. No puedo esperar para ir a las playas y a provar la comida nuevamente. Determine which statements are true and which are false regarding the Phillips Curve: a) it is possible to have high inflation and high unemployment; b) the multiplier tells the relation between inflation and unemployment; c) MPC determines the slope of the Phillips Curve; d) MPS determines the slope of the Phillips Curve; e) the Phillips Curve predicts that inflation and unemployment will be at their lowest levels when we are at potential GDP; f) the same Phillips that discovered the curve invented the Phillips head screwdriver; g) the Phillips Curve is a pitch invented by Brandon Phillips; h) the Phillips Curve is constant over time; i) the Phillips Curve shows the short run relationship between inflation and unemployment. if the ka of the conjugate acid is 8.64 10-5 , what is the pkb for the base? What important fact about the wounded soldiers is reflected by the repetition of the bolded sentences in the excerpts from "In Another Country" by Ernest Hemingway? A. It establishes the irony that, although the wounded soldiers have physically left the warfront, the war continues to haunt them psychologically. B. It shows the gradual loss of hope and growing depression of the wounded soldiers and their need for distractions. C. It establishes the wounded soldiers determination to shun war and disobey military commands to return to the front after they recover. D. It shows the wounded soldiers sadness and disappointment at the lack of gratitude from the people they risked their lives to protect. E. It shows the wounded soldiers belief that the war would never end, even as thousands of soldiers were killed or wounded and sent to hospitals.