Two large parallel conducting plates are 9.0 cm apart and carry equal but opposite charges on their facing surfaces. The magnitude of the surface charge density on either of the facing surfaces is 3.7 nC/m 2. Determine the magnitude of the electric potential difference between the plates.

The statements about the independent variable that are correct are:

The correct option are A, C, and E.

A variable that is independent is precisely what it sounds like. It is a stand-alone variable that is unaffected by the other variables you are attempting to assess. Age, for instance, could be an independent variable.

The dependent variable is the variable that is being measured in an experiment

Learn more about independent and dependent variables at: https://brainly.com/question/82796

#SPJ1

The correct option is 2 because The negatively charged rod will induce a small amount of negative charge on the surface of the uncharged metal ball, causing a force of attraction between the two.

Although Earth is electrically neutral, its interior and crust each have a different charge. In clouds, the top face is negatively charged while the bottom face is positively charged.

About 90 to 95 percent of all lightning that you ever witness is negative lightning, which occurs when an ions is transported from a cloud to the ground. Positive lightning, on the other hand, occurs as a result of the positive charge that accumulates at the cloud's top.

To know more about Negatively charged visit:

https://brainly.com/question/7439274

#SPJ4

The kinetic energy of toy car is 18J. When it's velocity doubled, K.E is 72J and it's velocity tripled, then K.E is 162J.

A moving object's kinetic energy is inversely proportional to its mass and to the square of its velocity. Similarly, an objects with equivalent mass and speed will have double the kinetic energy as one with double the mass and speed will have four times the kinetic energy.

Kinetic energy(K.E) = 1/2 mv^2

Mass of toy = 4Kg

V= 3m/s

K.E => 1/2 x 4 x 3^2

=> 18J

If velocity doubled, which means the new velocity = 6m/s

   K.E => 1/2 x 4 x 6^2

           => 72J

If velocity tripled, which means the new velocity = 9m/s

         K.E => 1/2 x 4 x 9^2

               => 162J

Learn more about velocity here:

brainly.com/question/19309255

#SPJ1

The amount of force that is needed to accelerate the airplane is 40,992 N.

option B is the correct answer.

The amount of force that is needed to accelerate the airplane is calculated by applying Newton's second law of motion as follows;

Mathematically, the formula for Newton's second law of motion is given as;

F = ma

where;

The amount of force that is needed to accelerate the airplane is calculated as follows;

F = ( 9,760 kg )  x ( 4.2 m/s² )

F = 40,992 N

Learn more about force here: https://brainly.com/question/12970081

#SPJ1

Answer:

Tension is the pulling force transmitted axially by the means of a string, a rope, chain, or similar object, or by each end of a rod, truss member, or similar three-dimensional object; tension might also be described as the action-reaction pair of forces acting at each end of said elements

The thing which would happen if the weight of people increased on a roller coaster is that it will make it harder for it to slow down.

This is referred to as the force acting on the object due to gravity and it is denoted as W= mg where m is mass and g is acceleration due to gravity.

We should note that the larger the mass, the larger the momentum, and the more force you need to change it. Weight however does not make a roller coaster go faster but it does make it harder to slow down which is therefore the reason why it was chosen as the correct choice.

Read more about Weight here https://brainly.com/question/2337612

#SPJ1

A yellow lamp emits light with a wavelength of 6.00 ·. 3.01 x 10 19 photons such photons are required to produce 10.0 joules worth of photons.

The quanta that make up light are called photons, and in the absence of any other interactions that would cause their characteristics to change, they remain ethereally stable with no indication that they would transform into any other particle.

In addition to releasing energy and generating heat, chemical activities within your body also release small quantities of photons, which are fundamental light particles. The bottom portion of your face and late afternoon are when the glow is most prominent.

learn more about photons

https://brainly.com/question/15946945

#SPJ1

Answer:

Hyperbola

Explanation:

Hyperbola: When the plane intersects the double napped cone such that the angle between the vertex and the angle is less than the vertex angle, the resulting conic section in the form of an open curve is called a hyperbola.

The magnitude of the gravitational force acting on the satellite is 3.16 x 10^22 N.

The gravitational force between two objects can be calculated using Newton's Law of Universal Gravitation: F = G * (m1 * m2) / r^2, where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between their centers.

To calculate the gravitational force acting on the satellite, we need to know the mass of the satellite (m1) and the distance between the center of Earth (m2) and the center of the satellite (r).

The mass of the satellite is given as 1,500 kg

The distance between the center of Earth and the center of the satellite is the distance from the surface of Earth to the satellite + the radius of Earth:

r = (1 Earth radius + 6.37 x 106 m)

We can use the given information to calculate the force of gravity acting on the satellite:

F = G * (m1 * m2) / r^2

F = (6.67 x 10^-11 N*(m^2)/(kg^2)) * (1,500 kg * 5.97 x 1024 kg) / (6.37 x 106 m + 6.37 x 106 m)^2

F = 3.16 x 10^22 N

The magnitude of the gravitational force acting on the satellite is 3.16 x 10^22 N.

Learn more about gravitational force in brainly.com/question/12528243

#SPJ1

Answer:

3,700 N

Explanation:

Someone already explained it, but didn't give an answer that can be put into khan academy.

a) The centripetal acceleration of the mass is 526.38 m/s².

b) The tension in the string  is 263.19 N.

Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.

Angular speed of the mass = (5/1.5) revolution per second

= (5 ×2π)/1.5 rad/s

= 20.94 rad/s

a)  the centripetal acceleration of the mass = ω²r

= (20.94)²×1.2 m/s²

= 526.38 m/s².

b)  the tension in the string = mω²r

= 0.50 kg × 526.38 m/s²

= 263.19 N.

Learn centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ1

Explanation:

click on the image and thats your answer

The thing that scientists use to divide the geologic time scale is option C: Major divisions in the fossil records

Fossils are the remains or traces of ancient organisms that have been preserved in rock layers. Scientists study fossils to learn about the history of life on Earth, and the different types of fossils found in different rock layers can provide information about the different time periods in which those organisms lived.

Other methods, such as major changes in mineral deposits in the rock layers, evidence for catastrophic events in Earth's history, and major divisions in the sedimentary rock layers, can also provide information about different time periods, but the use of fossils is the main method for dividing the geologic time scale.

Learn more about fossil records  from

https://brainly.com/question/27346773

#SPJ1

Answer: A viscous fluid is thicker and more difficult to pour than a typical liquid, while a liquid is a substance that has a definite volume but no fixed shape and can flow to conform to the shape of its container. ✅

PLEASEEEE GIVE BRANLIEST

According to the given statement 10W power did you deliver.

Power is the rate at which energy is transferred, transformed, or converted. It is a measure of the amount of work that can be done in a given amount of time. In physics, power is the product of the time rate of change of energy, or the rate of doing work. Power is measured in watts or joules per second (J/s). It is an important concept in many fields, such as mechanics, thermodynamics, electromagnetism, and nuclear physics. It is also used to measure the capacity of machines, devices, and systems to perform work.

Force=10N

Distance =10m

Time=10s

Power =?

But Power= Work done/Time taken

P= W/s

W= F x d=10x10=100

P=100/10

P=10W

To learn more about Power visit:

brainly.com/question/25864308

#SPJ4

earth orbits the sun once every 365.25 days. find the average angular speed of earth about the sun.

99×10−7 rad/s.

Answer:

A-B: positive

B-C: zero

C-D: negative

Explanation:

In a velocity-time graph, acceleration is shown by the slope or steepness of the graph. A positive acceleration means that the line of the slope is upward, while a negative acceleration means that the line of the slope is downwards.

A horizontal line shows that the acceleration is 0, which means that the object is stationary.

The following calculations in standard notation is 9.13[tex]e_{1}[/tex], 1.90[tex]e^{-10}[/tex], 6.14[tex]e^{8}[/tex].

A standard form of a number in maths is basically mentioned for the representation of large numbers or small numbers. We use exponents to represent such numbers in standard form.

The following calculations and report your answer with three

101,455,348 ÷ 1,111,419 =91.28452

=91.28452 ( in real numbers)

=9.13×[tex]10^{1}[/tex] (Scientific notation)

=9.13[tex]e^{1}[/tex]

Therefore, the answer is 9.13[tex]e_{1}[/tex].

(ii). 0.000000612 × 0.00031119 = 0.000000000190

=0.000000000190 ( in real numbers)

=1.90×[tex]10^{-10}[/tex] (in scientific notation)

=1.90[tex]e^{-10}[/tex]

Therefore, the answer is 1.90[tex]e^{-10}[/tex].

(iii). 297,060 + 0.0004839 =613900000

=613900000 ( in real numbers)

=6.14×[tex]10^{8}[/tex] (in scientific notation)

=6.14[tex]e^{8}[/tex]

Therefore, the answer is 6.14[tex]e^{8}[/tex].

For more such questions on  standard notations

https://brainly.com/question/10253124

#SPJ4

The motion of an object moving with uniform circular motion is always tangent to the circle, so the speed of an object moving in a circle is known as the tangential speed..

Uniform circular motion is the motion of an object in a circular path with a constant speed and the direction of velocity is perpendicular to the direction of acceleration. Examples of objects that experience uniform circular motion are wheels and clockwise motion where these objects have a constant linear speed, constant angular velocity, and constant centripetal acceleration. The speed in the circular motion of the object is also called the tangential speed where the object is moving in a circle in the direction of offending its spin path.

Centripetal acceleration is the acceleration directed towards the center of the circle. this centripetal acceleration that makes the wheel and clockwork move in a circle because they are accelerating towards the center of the circle.

Learn more about  centripetal acceleration at:

https://brainly.com/question/14465119

#SPJ4

Answer: Option C.

Explanation:

As the speed of plane increases and it moves forward it allows to push air on the bottom of the wings of the plane which results in increasing the pressure

The fact of air pressure on top of planes wing decreases with the increase bin plane's speed is based on Bernoulli’s Principle which states that with the fast moving air, the pressure decreases.

Therefore,n when the plane moves up it's wing pushes air down and on the same time the air pressure decreases at the top of the wing, this difference between the high and low pressure allows the flight to lift up.

Hence, the correct option is C.

1. The displacement of a body falling freely from rest at time t seconds is given by the formula d = -1/2 gt^2 + vt + d0, where g is the acceleration due to gravity (in this case, -10 m/s), v is the initial velocity (in this case, 0 m/s), and d0 is the initial displacement (in this case, 0 m). Plugging in the values, we get d = -1/2 (-10 m/s) (3 s)^2 + 0 m/s (3 s) + 0 m = -45 m.

2. The speed of a body falling freely from rest at time t seconds is given by the formula v = gt + v0, where g is the acceleration due to gravity (in this case, -10 m/s) and v0 is the initial velocity (in this case, 0 m/s). Plugging in the values and setting v = 25 m/s, we get 25 m/s = (-10 m/s)t + 0 m/s. Solving for t, we get t = 2.5 s.

3. The displacement of a body falling freely from rest at time t seconds is given by the formula d = -1/2 gt^2 + vt + d0, where g is the acceleration due to gravity (in this case, -10 m/s), v is the initial velocity (in this case, 0 m/s), and d0 is the initial displacement (in this case, 0 m). Plugging in the values and setting d = -320 m, we get -320 m = -1/2 (-10 m/s) t^2 + 0 m/s t + 0 m. Solving for t, we get t = 8 s.

4. The speed of a body falling freely from rest at time t seconds is given by the formula v = gt + v0, where g is the acceleration due to gravity (in this case, -10 m/s) and v0 is the initial velocity (in this case, 0 m/s). To find the speed after falling 80 m, we need to find the time t that corresponds to this displacement. We can use the formula for displacement to find t: d = -1/2 gt^2 + vt + d0. Plugging in the values and setting d = -80 m, we get -80 m = -1/2 (-10 m/s) t^2 + 0 m/s t + 0 m. Solving for t, we get t = 2 s. Plugging this value of t back into the formula for speed, we get v = (-10 m/s) (2 s) + 0 m/s = -20 m/s.

5. The acceleration of an object is given by the formula a = (vf - vi)/t, where vf is the final velocity, vi is the initial velocity, and t is the time elapsed. In this case, the initial velocity is -20 m/s and the time elapsed is 1 s. The final velocity is not given, so we cannot use this formula to find the acceleration.

6. The displacement of an object with constant acceleration is given by the formula d = 1/2 at^2 + vt + d0, where a is the acceleration, v is the initial velocity, t is the time elapsed, and d0 is the initial displacement. In this case, the acceleration is -10 m/s^2, the initial velocity is -20 m/s, the time elapsed is 4 s.

What is speed?

Speed is a measure of how fast an object is moving. It is defined as the distance an object travels per unit of time. In equation form, speed is represented by the letter v and is equal to the distance d traveled divided by the time elapsed t: v = d/t. The unit of speed is typically meters per second (m/s) or kilometers per hour (km/h). For example, if a car travels a distance of 200 meters in 10 seconds, its speed is v = 200 m / 10 s = 20 m/s.

Therefore, the correct answer is as given above

learn more about speed: brainly.com/question/13943409

#SPJ1

Dropping a ball of dough onto a kitchen counter, its energy store of potential energy is converted into kinetic energy as it falls. Upon impact, the kinetic energy is converted into potential, thermal, and sound energy.

When a ball of dough is dropped onto a kitchen counter, there is a change in the energy store of the dough. Initially, the dough has potential energy due to its position above the counter. As the dough is dropped, this potential energy is converted into kinetic energy, or energy of motion. As the dough falls, it gains speed and thus increases in kinetic energy.

When the dough strikes the counter, the kinetic energy is converted into a combination of potential energy and thermal energy. The dough compresses and deforms upon impact, increasing its potential energy. The compression and deformation also generates heat, which increases the thermal energy of the dough. A portion of the kinetic energy is also converted into sound energy as the dough makes contact with the counter.

To learn more about potential energy visit: https://brainly.com/question/13997830

#SPJ4

There are 12.046×10²³ molecules in one mole of O₂ gas.

Each molecule of oxygen has 2 atoms. Avogadro explained that at constant pressure and volume there are certain number of molecules in one mole of gas, irrespective of the type of gas. The number of molecules in 22.4 L of any gas is 6.023 × 10²³. This constant is known as avogadro constant. This is one of the most important constant in the chemistry. If the atomic weight of a gas is 35. It means 35 is the weight of the one mole of gas or of 6.023 × 10²³ molecules of that gas. Atomic weight of any gas is the weight of a fixed number of molecules, which is determined by the avogadro's number. So the number of molecules in one mole of O₂ gas = 2 × 6.023 × 10²³

= 12.046×10²³

To know more about one mole, here

https://brainly.com/question/14585733

#SPJ4

Answer: 33,992 J (Joules)

Explanation:

The kinetic energy of an object is the energy it possesses due to its motion. The formula for kinetic energy is: Kinetic energy = 1/2 x mass x velocity^2

So, for a 233 kg car traveling at 12 m/s, the kinetic energy can be calculated as:

Kinetic energy = 1/2 x 233 kg x (12 m/s)^2

= 1/2 x 233 kg x 144 m^2/s^2

= 33,992 J (Joules)

It is important to note that the unit of energy is Joules (J).

In this case, the car has 33,992 Joules of kinetic energy. This energy represents the ability of the car to do work, such as causing damage if it collides with an object, or to overcome a force such as friction or air resistance. Kinetic energy increases with the mass of the object and the square of its velocity.

When sound waves are traveling in a medium, the energy is transferring all around.

Option D is the correct answer

Sound is the movement of energy through a substance – like air or water and it is caused by vibrations.

Sound wave is an example of a mechanical wave because it requires material medium for its propagation.

A wave is a vibration or disturbance that travels from one point to another and carries energy.

The movement of this sound wave, when it transfers energy from one point of medium to another is known as sound wave propagation.

Thus, we can conclude that during the propagation of sound waves, energy is transferred to the entire medium.

Learn more about sound waves here: https://brainly.com/question/1199084

#SPJ1

The averages of stacks one and two differ, there isn't a direct relationship between the number of cups and the stack's height.

The average is calculated by taking the total number of values in a given set and dividing it by the sum of all the values. The average of a group of values in a sample of data is what is referred to as a mean. The arithmetic mean is another name for an average, in other words. The term "mean" describes the average.

Given in the question,

total number of stacks = 2

Stack 1 has 6 cups of height, h1 = 15cm

Stack 2 has 12 cups of height h2 = 23cm

calculating the average: h1 - h2/ n1 - n2

= 15-23/6-12

= - 8/-6

=4/3

With an average of 4/3, to obtain the number of cups needed to obtain a height of 50m, we have:

50 / (4/3) = 50 × 3/4

= 150/4

= 37.5

Because the averages of stacks one and two differ, there isn't a direct relationship between the number of cups and the stack's height.

To know more about arithmetic mean visit

brainly.com/question/8622653

#SPJ4

A student performs an experiment to determine the volume of hydrogen gas produced when a given mass.

To determine the volume of hydrogen gas produced in a chemical reaction, the student likely performed a series of steps. Here is an example procedure that the student may have followed

Hence, by following this procedure, the student should be able to determine the volume of hydrogen gas produced when a given mass of reactant is used. This information can then be used to calculate the stoichiometry of the reaction, determine reaction rate, or make other useful observations about the chemical system under study.

To know more about experiment here

https://brainly.com/question/13981167

#SPJ1

It strikes the wall normally with a velocity of v₁ = 30 m/s and rebounds with a velocity of v₂ = -20 m/s. We know that impulse is equal to the change in momentum. So, So, the impulse of the force exerted by the wall on the ball is 5 kg m/s.

a)x²+x+1=0

x=b±√b²-4ac/2a

x=-1±√-3/2=-1±√3i/2

b) z=-1/2+i√3/2

x=-1/2 y=√3/2 lies  

r=√x²+y²=√1/4+3/4-1

sin∅=√3/2 cos∅=-1/2

tan∅=√-3

since Z lies in Q  2nd arg(Z)=π-∅

∅=π-π/3=2π/3

Z=r(cos∅+isin∅)

=1(cos 2π/3+isin2π/3)

To learn more about Momentum refers to:

https://brainly.com/question/1042017

#SPJ1

The momentum of a child and wagon if the total mass of the child and wagon given is 22 kg and the velocity is 1. 5 m/s is 33 kg⋅m/s.

Given:

Mass collectively=22 kg

velocity= 1. 5 m/s

To find momentum we use the formula for momentum which is;

p=mv

Putting the values we get

p= 22*1.5

p=33 kg⋅m/s

Hence, The momentum of a child and wagon when the total given mass of the child and wagon is 22 kg and the velocity is 1. 5 m/s is 33 kg⋅m/s.

To know more about momentum do visit

https://brainly.com/question/24030570

#SPJ4

The first ionization energy in group 15 elements in increasing atomic number decreases.

Ionization energy is the amount of energy requires to detach one electron from the atom. In the periodic table the ionization energy decreases as one goes down.

Therefore ionization energy is the quantity of energy that an isolated, gaseous atom in the ground electronic state must absorb to discharge an electron resulting in a cation. This energy is usually expressed in kJ/mol or the amount of energy it takes for all the atoms in a mole to lose one electron each.

Learn more about ionization energy here : brainly.com/question/20658080

#SPJ1