Noise is any unwanted or random signal that interferes with the intended signal. It can disrupt communication, distort information, and reduce the quality of signals. SNR, or signal-to-noise ratio, is a measure of the level of signal power compared to the level of noise power.
There are various types of noise that can occur in electronic systems, each with its own characteristics and sources. Here are some examples: Crosstalk noise: This is a type of noise that occurs when signals from one circuit or channel interfere with signals from another circuit or channel. It is commonly found in communication systems such as telephone lines, where signals from adjacent wires can bleed into each other. Environmental noise: This is a type of noise that is caused by external factors such as electromagnetic interference, radio frequency interference, or vibrations. Environmental noise can be particularly problematic in sensitive electronic equipment such as medical devices or scientific instruments.
Thermal noise, also known as Johnson-Nyquist noise, is caused by the random movement of electrons due to their thermal agitation in conductors. It is found in all electronic devices and increases with temperature. Shot noise occurs when the number of electrons or other charge carriers passing through a device or conductor is not constant, causing fluctuations in the current. This type of noise is common in electronic devices such as transistors and diodes, particularly in low current or low light situations. Flicker noise, also known as 1/f noise, is a type of noise that occurs due to imperfections in electronic devices or components, resulting in a noise level that is inversely proportional to the signal frequency. It is usually found in transistors, resistors, and integrated circuits.
To know more about noise power visit:
https://brainly.com/question/31264483
#SPJ11
You throw rocks repeatedly into a lake and make waves. If you throw rocks more frequently, what happens to the waves? Why?
If you throw rocks more frequently into a lake, the waves will become more frequent and closer together. This is because throwing the rocks more frequently increases the rate of disturbance in the water, leading to more waves being created.
What is the rocks distance about?As you throw rocks more frequently into the lake, the water molecules in the lake will be disturbed more often and at a faster rate.
These disturbances create waves on the surface of the water, which are essentially the transfer of energy through the water molecules. When the rocks are thrown more frequently, more energy is added to the lake at a faster rate, which results in more waves being created.
Due to the above, the distance between the waves will decrease and the amplitude of the waves will likely be the same. This is due to the fact that the rate of disturbance is increased and therefore more energy is added to the system and the waves are created more frequently.
Learn more about rocks from
https://brainly.com/question/398139
#SPJ1
Jordyn places a balloon near some paper scraps, but nothing happens. After Jordyn
rubs the balloon against her shirt, the paper scraps start sticking to the balloon.
Jordyn's teacher notes that there is now an electric force between the balloon and
the paper.
What could have happened when the balloon was rubbed on Jordyn's shirt to cause
this electric force?
The balloon has gained a net electric charge.
The balloon has lost its net electric charge.
The net electric charge of the balloon did not change.
A balloon absorbs electrons from a wool fabric when it is rubbed against it, leaving the balloon with a negative charge and the wool with a positive charge.
Is there static electricity in a balloon?Electrons from the atoms and molecules in your hair migrate to the balloon when you brush it against your head. The balloon acquires a negative charge thanks to the negative charge of electrons, but your hair retains a positive charge.
Electrons migrate from the hair or wool to the balloon when the balloon is rubbed against it. The balloon picks up a net negative charge because electrons have a negative charge. The can rolls because the positive charges in the can are drawn to the negative charges in the balloon.
learn more about static electricity refer
https://brainly.com/question/18562731
#SPJ1
A hollow steel tube with an inside diameter of 100mm must carry a tensile load of 400 kn.
The outer diameter of a hollow steel tube when the stress is limited to 120 MN/m² is 119.35 mm
Axial stress refers to the stress induced in a loaded member along the longitudinal or axial member direction. Calculated mathematically from the ratio of the axial or longitudinal force to the cross-sectional area of the member.
Using the expressions for the axial stress and rated load, the cross-sectional area of the tube can be determined. Substituting the values for the cross-sectional area of the tube and the inside diameter of the tube in the expression for the cross-sectional area of a hollow cylinder yields the outside diameter of the tube.
σ = F/A
The formula for calculating the cross-sectional area of a hollow cylinder.
A = π/4(D² – d²)
Here, the inside and outside diameters of a hollow cylinder are d and D.
Step 1
Determine the cross-sectional area of tube (A) using the axial stress expression:
σ = F/A
Here, the axial stress limit is σ = 120 MN/m2 and the tensile load is F = 400 kN
σ = F/A
120 x 10³KN/1 MN = 400 kN/A
A = (400 kN) ÷ (120 x 10³ kN/m²)
A = 3333.33 mm²
Substitute the values for the cross-sectional area of the cylinder and the inside diameter of the cylinder in the equation for the cross-sectional area of the hollow cylinder to calculate the outside diameter of the cylinder.
A = 3333.33 mm²
d = 100 mm
A = π/4(D² – d²)
3333.33 mm² = π/4(D² – 100²)
D² =[tex]\sqrt{ 14244.128}[/tex]
D = 119.35 mm
So, the outside diameter of the hollow is 119.35 mm.
Complete the questions is:
A hollow steel tube with an inside diameter of 100 millimeters must carry a tensile load of 400 kN. What is the outside diameter of the tube if the stress is limited to 120 MN/m²?
Learn more about the axial stress at https://brainly.com/question/7013119
#SPJ4
1. write true or false
Centrifuge works on centripetal force
b. separating funnel is used to separate blood cells from blood samples
c. Rotors are used in physical separation of a solid and a liquid.
d. Centrifuge is used to separate suspended particles from suspension
e. Milk and water are separated by using separating funnel
f. The role of condenser is connected to hot water supply
Answer:
a
true
true
true
true
true
true
true
hat conditions are necessary for a partial solar eclipse? what conditions are necessary for a partial solar eclipse? first or third quarter moon at a node new moon on ecliptic, with us in the penumbral shadow full moon at apogee full moon on equator, with us in the umbral shadow new moon at perigee
Answer:
An eclipse of the sun must occur at a "new" moon - when the moon is between the earth and the sun.
The word penumbra refers to a "partial" eclipse as opposed to umbra which refers to total eclipse.
A partial eclipse must include both terms - "new" and "penumbra"
According to the NEC, a Class 1 power limited circuit
must be supplied from a source having a rated output of
not more than _____ volts and 1000 volt-amperes.
According to the NEC, a class 1 power limited circuit must be supplied from a source having a rated output of not more than 30 volts and 1000 volt-amperes.
NEC stands for National Electrical Code. It is a part of National Fire Protection Association (NFPA) of united states. NEC provides the standard and code for the safe installation of electrical wiring and equipment.
Class 1 power limited has a device that controls or regulates the current from the power source. This device prevents the overflow of the current in the circuit and thereby also prevents the short circuiting, overload, ground fall, etc.
To know more about power, here
https://brainly.com/question/29575208
#SPJ4
Convert 1.5 days to s
Convert 5.2 ft to m
Convert 3600 s to hr
Convert 10.2 m to ft
Convert 305 g to kg
Convert 180 pm to m
Convert 73 kg to g
Convert 1,366 s to min
Convert 86,000 m to km
Please answer these and SHOW ALL WORK, please please please show ALL WORK. Need this done right now please help! Thank you so much!
According to the question, the answer of the given convert will be: 1.5 days = 36 hours, 5.2 ft = 1.58 m, 3600 s = 1 hr,10.2 m = 33.46 ft, 305 g = 0.305 kg, 180 pm = 0.18 m, 73 kg = 73000 g, 1,366 s = 22.77 min, 86,000 m = 86 km.
What is convert?
Convert is a term used to describe the process of changing one type of data into another. This could include changing a file format, changing a text document into a spreadsheet, or converting a physical document into a digital file. It is a useful tool in many industries and is often used to make sure that data is stored in a standard format, making it easy to access and use. Convert is used in a variety of settings, including media, accounting, and business. It is also used to help ensure data security and accuracy.
To learn more about convert visit:
brainly.com/question/29217523
#SPJ1
How does weathering and erosion work together to shape the earth
Answer:
is d
Explanation:
how does resistance change with charge density?
The resistance would increase when the charge density increases.
What is the resistance?We have to note that when we talk about the resistance, we mean the opposition that is offered to the flow of current in the circuit. Let it be known that the resistance would be seen to increase as the charge density is increasing. The reason why this is going to occur is that we are going to have a lot of charges that are migrating at the same time and as such the rate of the movement of the charges or their speed would be slowed down.
If on the other hand, we see that the charge density is low, we are going to have less charges and they are going to move more freely and the resistance or the opposition to the movement of the charges would be lower.
Learn more about resistance:https://brainly.com/question/11431009
#SPJ1
How to calculate the energy tranformed from the water in the kettle to the urrounding in 2 hour i 4600 J when the ma i 0. 50kg heat capacity i 4200 J/kg and initial temperature i 100°
The energy transformed from the water in the kettle to the surrounding water loses 4200 J/kg °C * 0.5 kg = 2100 J/°C.
As it's lost 46,200 J in total (regardless of the time it took for this to happen), it must have reduced in temperature by 22 degrees. Assuming 100°C initially, temperature of water in kettle is now 78°C.
The purpose of this experiment is to determine the specific heat of two metal blocks. In one of these measurements you will also investigate the use of Newton's Law of Cooling to calculate a cooling correction. The units of specific heat in SI are J / kg ˚C.
When a body of mass M at temperature T1 receives an amount of heat (or energy) Q, its temperature may increase from T1 to T2. The heat capacity C of a body is the amount of heat required to raise its temperature by one (Kelvin) degree.
To know more about energy transformed here
https://brainly.com/question/26547865
#SPJ4
Ethan is 1. 85 meters tall. At 10 a. M. , he measures the length of a tree's shadow to be 28. 45 meters. He stands 24. 3 meters away from the tree, so that the tip of his shadow meets the tip of the tree's shadow. Find the height of the tree to the nearest hundredth of a meter.
Ethan is 1. 85 meters tall. At 10 a. M. , he measures the length of a tree's shadow to be 28. 45 meters. He stands 24. 3 meters away from the tree, so that the tip of his shadow meets the tip of the tree's shadow. the height of the tree to the nearest hundredth of a meter is 12.68 meters
As a result, using the definition of proportion,
Tree: ethan = ethan shadow: Tree shadow
If you replace all the values, you get;
x / 1.85 = 28.45 / (28.45 - 24.3)
x / 1.85 = 28.45 / 4.15
x = 1.85*28.45 / 4.15
x = 12.68 m (rounded)
Consequently, the tree's height will be;
12.68 meters
Your question is incomplete but most probably your full question attached below
Learn more about height at https://brainly.com/question/26417592
#SPJ4
Can someone write 2-3 sentences about waves. (Transversal waves, Wavelength, Longitudinal waves.)
The answers include the following below:
Transversal waves - This is the type of wave whose oscillations are perpendicular to the direction of the wave's advance.Wavelength - This is the distance between corresponding points of two consecutive waves.Longitudinal waves - This is the type of wave in which the vibration of the particles takes place in the same direction as that of the wave.What is a Wave?This is referred to as the propagation of disturbances from place to place in a regular and organized way and there are different types of waves.
An example is the longitudinal wave which has the vibration of the particles takes place in the same direction as that of the wave.
Read more about Wave here https://brainly.com/question/25699025
#SPJ1
A lens produces a real image of a real object.
a) Is the image inverted or upright?
b) Is the lens diverging or converging?
c) Is the image enlarged or reduced in size?
d) If two convex lenses identical in size and shape aremanufactured from glass with two different indices of refraction,would the focal length of the lens with the greater index ofrefraction (lens 1) be larger or smaller than that of the otherlens (lens 2)?
The image is inverted, the lens is converging, the image is enlarged in size, the focal length of the lens with the greater index of refraction(lens 1) will be smaller than that of the other lens(lens 2).
A real image is that which can be obtained on the screen whereas a virtual image cannot be. A concave lens always produces virtual image whereas a convex lens can produce both real and virtual image. So the lens is convex lens which is also called converging lens. A converging lens always produces enlarged or the same size image but never produce smaller image. So the image will be enlarged in size.
The refractive index of a glass is the measure of light bending ability of it. Greater the refractive index more will be the bending of a light ray. So, if two convex lenses identical in size and shape are manufactured from glass with two different indices of refraction, the focal length of the lens with greater refractive index would be smaller.
To know more about focal length, here
https://brainly.com/question/29870264
#SPJ4
p
4. Which of the following statements is not accurate regarding identifying factors on the health pyramid?
All three sides of the health triangle affect each other.
Personal actions are categorized on the health pyramid by the intended purpose of the initial actions.
Physical health is the base of the triangle and is the most important part of the health triangle.
Working out a gym would be categorized in the physical health category.
Pyramid collision, recommendations are made specifically for each person depending on their age, gender, and amount of physical activity. The consumption of cereals, milk, veggies, fruit, and oils are the main.
A health impact pyramid: what is it?
The Health Benefit Pyramid is a diagram that shows the many levels of impact that can come from interventions in public health. Attempts to deal with the social determinants that potentially affect your health are at the bottom of the pyramid, suggesting interventions with the highest potential impact. Housing, financial stability, public safety, jobs, education, and the environment are a few examples of these. The broader determinants of health are these.
What are the four primary categories of factors that affect health?
Numerous variables affect health, including These circumstances are referred to as social determinants, which are the socioeconomic factors that influence life expectancy and quality of life and support health. Examples of these factors include accommodation, education, access to food, and transportation. Too frequently, people lack control over their ability to access these resources that influence their health.
To know more about collision visit :
brainly.com/question/4322828
#SPJ1
Who deals with the cosmos order?
Answer: Cosmology
Explanation:
Which is defined as the statement that answers the scientific problem based on the results of the experiment?
Conclusion statement defines the answer of a scientific problem based on the result of the experiment.
A scientific problem is solved by the scientific methods. A scientific method is the step-by-step approach to a conclusion of the problem. It may include the following steps.
Observation: It is the first step of the method. It is based on that how do you see the problem.
Hypothesis: It is the result you think that you will get.
Prediction: It is based on your scientific knowledge. If our hypothesis is correct than our prediction will also be true.
Experiment: It is the system or mechanism designed by you to test your hypothesis.
Conclusion: It is the final result based on the experiment of the method. This statement tells you whether your hypothesis is true or not.
To know more about Conclusion, here
https://brainly.com/question/78686
#SPJ4
5) Calculate the moment caused by a 2 kg mass placed at a distance of 0.5 m to the left of the pivot. Is this
moment clockwise, or anti-clockwise? (2 marks)
The moment caused by the 2 kg mass placed at a distance of 0.5 m to the left of the pivot is 1 kg m. This moment is anticlockwise.
What is moment ?Moment is a physical parameter equal to the product of the distance or displacement and another physical quantity such as mass, force etc.
For a mass of 2 kg and distance of 0.5 m the moment is :
moment = mass × distance
= 2 × 0.5 = 1 kg m
If we are taking the moment of force, then it the product of the distance and force acting on the body is taken.
force = mg
F = 2 kg × 9.8 m/s² = 19.6 N
then moment of force = 19.6 N × 0.5 m = 9.8 N
The moment from left to right in direction is anticlockwise.
Find more on moment:
https://brainly.com/question/16755013
#SPJ1
1. Benefits of Renewable Energy?
2. Renewable Energy Today?
3. Using Biomass as an Energy Source?
Answer:
1.Benefits of Renewable Energy Use
Less global warming.
Improved public health.
Inexhaustible energy.
Jobs and other economic benefits.
Stable energy prices.
2.Hydroelectric generation at scale dates back more than a century, and is still our largest renewable source – excluding traditional biomass, it still accounts for more than 60% of renewable generation
3.Biomass can be burned to create heat (direct), converted into electricity (direct), or processed into biofuel (indirect). Biomass can be burned by thermal conversion and used for energy
Which object(s) formed last in our solar system?the sunthe solar nebulathe inner planetsthe planetesimals.
The planetesimals, which are small bodies that eventually formed into larger objects such as planets, are believed to have formed last in our solar system.
Our solar system formed around 4.6 billion years ago from a cloud of gas and dust, known as the solar nebula. The sun formed first from the dense, hot center of the nebula. As the sun formed, it began to emit heat and radiation, which caused the remaining gas and dust to begin to condense and form into small objects known as planetesimals.
As these planetesimals collided and merged, they grew larger and larger, eventually forming the inner planets, such as Mercury, Venus, Earth, and Mars. The outer planets, such as Jupiter and Saturn, also formed from the collision and merger of planetesimals, but they formed later in the process.
To learn more about planetesimals visit: https://brainly.com/question/10337322
#SPJ4
Your question seems incomplete, but I assume the question was:
"Which object(s) formed last in our solar system?
the sun
the solar nebula
the inner planets
the planetesimals."
2. A barista uses the expression 4.25v + 2.65g to calculate her profit when she sells v, ven
and g, grande, beverages. What is the barista's profit, in dollars, when she sells 36 venti an
44 grande beverages?
Instructions for finding a buried treasure include the following: Go 779.7 paces at 288◦ , turn to 132◦ and walk 266 paces, then travel 115 paces at 75◦ . Find the magnitude of the resultant displacement from the starting point. Answer in units of paces. Answer in units of paces
Answer :
after this all u can write this
How can we relate Force and Weight? What are their differences?
Force and weight are related in that weight is a type of force. Specifically, weight is the force exerted on an object due to gravity. It is measured in units of force, such as newtons (N) or pounds (lb).
Weight is a scalar quantity, which means it has magnitude but no direction. It is determined by the mass of an object and the acceleration due to gravity.
The formula for weight is:
Weight = mass x gravity (W=mg)
On the other hand, Force is a vector quantity, which means it has both magnitude and direction. Force can be described as the push or pull on an object. It can be due to a variety of causes, such as friction, tension, or pressure. It is also measured in units of force, such as newtons (N) or pounds (lb).
So, to relate force and weight, weight is a force that acts on an object due to gravity, whereas force can be any kind of push or pull on an object, and weight is one of them.
To conclude, weight is a force that is exerted on an object due to gravity, while force is a more general term that can refer to any type of push or pull on an object. The key difference between the two is that weight is a scalar quantity while force is a vector quantity.
Hope This Helps You!
Alternative energy sources like solar and wind power _______. A. Are always available b. Are only replenished with human intervention c. Are renewable d. Are more versatile than fossil fuels please select the best answer from the choices provided a b c d.
Alternative energy sources like solar and wind power are always available option A is the correct answer.
How many different kinds of alternative energy are there?In addition to the seven energy sources mentioned above, other alternative energy sources include geothermal energy, wave energy, hydroelectric energy, solar thermal energy, and even space solar energy. Geothermal energy is generated within the earth and is used, unlike wave and hydroelectric energy uses the power of water.
Does solar power have a finite or infinite supply?There will never be a shortage or shortage of solar energy because it is one of the cleanest and most plentiful renewable resources. Every person on the planet might theoretically have access to energy for a year with just one hour of sunlight shining on the earth's atmosphere.
To know more about Alternate energy visit
brainly.com/question/3758506
#SPJ4
When reggie stepped up to the plate and hit a 0. 150-kg fast ball traveling at 36. 0 m/s, the impact caused the ball to leave his bat with a velocity of 45. 0 m/s in the opposite direction. If the impact lasted for 0. 002 s, what force did reggie exert on the baseball?.
When reggie stepped up to the plate and hit a 0. 150-kg fast ball traveling at 36. 0 m/s, the impact caused the ball to leave his bat with a velocity of 45. 0 m/s in the opposite direction. If the impact lasted for 0. 002 s, the force did reggie exert on the baseball is 6075 N.
The force can be calculate as follows:
assuming that the ultimate direction of motion is positive and the starting direction of motion before to impact is negative.
m = 0.15 kg, or the mass of the ball being struck
v0 is the ball's pre-impact initial velocity and is equal to 36 m/s.
45 m/s is the ball's final speed after impact, or v.
Time of Impact: 0.0020 seconds
Reggie's force on the ball was F.
Incorporating impulse-change into the momentum equation
F t = m (v - v₀)
F (0.0020) = (0.15) (45 - (- 36))
F = 6075 N
Learn more about force at https://brainly.com/question/13976717
#SPJ4
What’s the first step you should take wen working to create a work life balance
The steps to achieve a work-life balance, one should manage their time well, establish limits, pay attention to their health, and enjoy their work.
How can one balance work and life?The state of equilibrium where a person equally priorities the responsibilities of their career and their personal life is known as work-life balance. Because both are significant, neither should be ignored. Common causes of a bad work-life balance include the following: expanded obligations at work. putting in more hours.
How do employees respond to work-life balance?An ACAS analysis on work-life balance and flexible working shown how a poor balance can cause absences, poor productivity, and stress. Strict regulations, an excessive workload, a hostile work environment, deadline pressure, and a lack of job security are some organisational variables that interfere with work-life balance.
Learn more about work-life balance here:
brainly.com/question/6842966
#SPJ1
A car accelerates uniformly from rest and
reaches a speed of 13.9 m/s in 3.7 s. The
diameter of a tire is 85.1 cm.
Find the number of revolutions the tire
makes during this motion, assuming no slipping.
Answer in units of rev.
The number of revolutions of the tire during the motion is 10 revolutions.
What is the number of revolutions of the tire?The number of revolutions of the tire during the motion is calculated from the distance travelled by the tire.
The total distance travelled by the tire during the motion is calculated as follows;
s = t ( u + v ) / 2
where;
u is the initial speed of the carv is the final speed of the cart is the time of motions = 3.7 x ( 13.9 + 0 ) / 2
s = 25.72 m
The number of revolutions of the tire is calculated as follows;
N ( 2πr ) = 25.71
where;
r is the radius of the tireN = ( 25.71 ) / ( 2π x 0.4255 )
N = 9.6 ≈ 10 rev
Learn more about number of revolutions here: https://brainly.com/question/20700248
#SPJ1
Man pushes a shopping cart to the right with 93 N of force and travel 23 m to tge right how much work is done on shopping cart ?
What happens when a falling object reaches terminal velocity?
it slows down.
it stops accelerating
It speeds up
it hits the ground and stops.
2. How does a falling object’s surface area affect calculations of terminal velocity?
The greater the objects surface area, the more air resistance it encounters
The greater the objects surface area, the greater the air density
Surface area does not affect an object’s terminal velocity
The greater the object’s surface area, the greater it’s terminal velocity
When the object reaches the terminal velocity the object stops accelerating. Option B
The greater the objects surface area, the more air resistance it encounters. Option A
What is the terminal velocity?Terminal velocity is the maximum velocity an object reaches when falling through a fluid, such as air, due to the balance of gravitational force and fluid drag.
Surface area affects terminal velocity because a larger surface area results in greater fluid drag force, which slows the object's descent. A smaller surface area results in less fluid drag and a higher terminal velocity.
Learn more about terminal velocity:https://brainly.com/question/2654450
#SPJ1
Dipole-dipole forces are considered the most important forces in polar substances because the London dispersion forces
They are attractive forces between two permanent dipoles, or two induced dipoles.
What is dipoles?A dipole is a type of electrical charge consisting of two equal and oppositely charged poles, or points of charge. The two poles are usually represented by a positive and negative sign. Dipoles are commonly found in molecules, atoms, and other types of particles, and are responsible for many of the physical and chemical interactions we observe in nature. Dipoles can also be created artificially with electrical equipment, such as in the case of an electric dipole antenna, which is used to transmit or receive radio signals. In a dipole, the two charges attract each other, which creates a field of force between them. The strength of this field depends on the distance between the two charges. Dipoles also exist in a magnetic form, in which the two poles have opposite magnetic poles and create a magnetic field.
This type of intermolecular force is a type of Van der Waals force and is much stronger than the London dispersion forces. They are responsible for most of the physical properties of polar substances, such as boiling points, melting points, and solubility.
To learn more about dipoles
https://brainly.com/question/14553213
#SPJ4
Leilani has struggled with body distortion for a while. She is so unhappy with how she imagines that she looks that she does not even want to leave
the house or hang out with her friends. In fact, if she can avoid being in public, she does. She just wants to stay in her room. What is the BEST
description of the effect that her body distortion is having?
A. dyslexia
B. anorexia
C. depression
D. suppression
The BEST description of the effect that her body distortion is having is (C) depression.
What is depression?Depression is a mental health disorder characterized by a persistent feeling of sadness, hopelessness, and loss of interest in activities. People with depression may experience changes in sleep, appetite, energy level, and concentration. Additionally, they may experience feelings of guilt, worthlessness, and helplessness. Symptoms of depression can range from mild to severe and can include physical symptoms such as fatigue, headaches, and stomachaches. Psychotherapy, medication, and dietary changes were available treatments for depression. With the right support and treatment, individuals can lead a healthy and fulfilling life.
To learn more about depression
https://brainly.com/question/10045613
#SPJ1