ANSWER:
What is The first stage in cellular respiration, what cycle?- GLYCOLYSIS
In glycolysis, the beginning process of all types of cellular respiration, two molecules of ATP are used to attach 2 phosphate groups to a glucose molecule, which is broken down into 2 separate 3-carbon PGAL molecules. PGAL releases electrons and hydrogen ions to the electron carrier molecule NADP+.What are the 4 stages of cellular respiration?It has four stages known as glycolysis, Link reaction, the Krebs cycle, and the electron transport chain. This produces ATP which supplies the energy that cells need to do work.what kind of weather would u assosiate with higher perssure system? How does the density, humidity and air motion compare to that of low pressure system?
Answer:
Low pressure systems typically arrive with storms and clouds. Air motion is usually upwards, as heated are is less dense and more buoyant than cooler air. A high pressure system is typically cooler than its counter-part, and skies are usually clear. Low pressure systems carry more water vapor due to rising hot air cooling and condensing.
Which of the following is an example of kinetic mechanical energy?
Immersive Reader
(2 Points)
A. A bike rolling down a hill
B. An elevated wrecking ball
C. A compressed spring
D. A loaded gun
E. A set mouse trap
Answer:
A
Explanation:
Kinetic energy must be moving. Potential energy has the ability to move but is not doing so at the moment.
A is likely the answer. But there's lots involved in that kind of motion.
B If the ball is elevated, it implies it is not moving yet. It has potential energy.
C Again, the spring is compressed. It will push something when it moves, but it is not moving yet.
D The load gun's bullet is not moving. It's still potential energy.
E. The mouse trap is set, but it is not moving. When the mouse eats the bait then it's potential energy will transform into kinetic energy.
Physics help, thank you guys so much!
Answer:
Δt = 5.85 s
Explanation:
For this exercise let's use Faraday's Law
emf = [tex]- \frac{d \phi}{dt}[/tex] - d fi / dt
[tex]\phi[/tex] = B. A
\phi = B A cos θ
The bold are vectors. It indicates that the area of the body is A = 0.046 m², the magnetic field B = 1.4 T, also iindicate that the normal to the area is parallel to the field, therefore the angle θ = 0 and cos 0 =1.
suppose a linear change of the magnetic field
emf = - A [tex]\frac{B_f - B_o}{ \Delta t}[/tex]
Dt = - A [tex]\frac{B_f - B_o}{emf}[/tex]
the final field before a fault is zero
let's calculate
Δt = - 0.046 (0- 1.4) / 0.011
Δt = 5.85 s
what is impulse in physical science
Answer:
In classical mechanics, impulse (symbolized by J or Imp) is the integral of a force, F, over the time interval, t, for which it acts. Since force is a vector quantity, impulse is also a vector quantity. ... A resultant force causes acceleration and a change in the velocity of the body for as long as it acts.
examples of buildup of static energy?
Answer:
Materials that can lose or gain electrons in this way are called triboelectric, according to Northwestern University. One common example of this would be shuffling your feet across carpet, particularly in low humidity which makes the air less conductive and increases the effect.
Explanation:
Hope that helps :)
An electron, moving toward the west, enters a uniform magnetic field. Because of this field the electron curves upward. The direction of the magnetic field is An electron, moving toward the west, enters a uniform magnetic field. Because of this field the electron curves upward. The direction of the magnetic field is downward. towards the west. upward. towards the south. towards the north.
Answer:
towards the north.
Explanation:
The uniform magnetic field has strength and direction in all points. The upwards motion of the field or he electronic curves will show a northern direction. Hence, the field can be created by taking the opposite magnetic in the two directions. The straight line of motion of the field will indicate the flow in the north direction. The magnetic field lines will remain parallel and stay uniform to poles.A ball on the end of a string is whirled around in a horizontal circle of radius 0.300 m. The plane of the circle is 1.00 m above the ground. The string breaks and the ball lands 2.30 m (horizontally) away from the point on the ground directly beneath the ball's location when the string breaks. Find the centripetal acceleration in m/s2 of the ball during its circular motion.
Answer:
86.7 m/s²
Explanation:
Given that
Radius of the circle, r = 0.3 m
Height of the plane above the ground, = 1 m
Distance at which the ball lands, d = 2.3 m
To solve this question, we would use one of the principles of projectile motion.
v = ut + 1/2at²
-1 = 0 + 1/2 * -9.8 * t²
-1 = -4.9 t²
t² = 1/4.9
t² = 0.204
t = √0.204
t = 0.45 s
Then again, it's constant horizontal speed is
v(x) = x/t
v(x) = 2.3 / 0.45
v(x) = 5.1 m/s
And finally, the centripetal acceleration is gotten using the formula
a = v²/r
a = 5.1² / 0.3
a = 26.01 / 0.3
a = 86.7 m/s²
___________is
objects total kinetic and potential energy.
Answer:
Bowling ball
Explanation:
Name the four layers of the atmosphere (in order starting at the bottom
Answer:
Troposphere, stratosphere, mesosphere and thermosphere. The next region is the exosphere, but that region is 500+ km from the Earth's surface.
[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the Concept of the Atmosphere.
The four layers of Atmosphere starting from bottom are as follows:
1.) Troposphere - The troposphere is the lowest layer of our atmosphere. Starting at ground level, it extends upward to about 10 km (6.2 miles or about 33,000 feet) above sea level.
2.) Stratosphere - The next layer up is called the stratosphere. The stratosphere extends from the top of the troposphere to about 50 km (31 miles) above the ground.
3.) Mesosphere - Above the stratosphere is the mesosphere. It extends upward to a height of about 85 km (53 miles) above our planet. Most meteors burn up in the mesosphere.
4.) Thermosphere - The layer of very rare air above the mesosphere is called the thermosphere. High-energy X-rays and UV radiation from the Sun are absorbed in the thermosphere, raising its temperature to hundreds or at times thousands of degrees.
a.
2. The following examples are good conductors except:
a. Silver
b. Metal
Plastic
d. Copper
Answer:
plastic
Explanation:
8. What is the mass of a toy car with a speed of 12.5 m/s and 47500 J of kinetic energy?
Answer:
608kg
Explanation:
Formula : Kinetic energy
½ ×mass x speed²
47500
½×12.5²
=608 Kg
The earth rotates through one complete revolution every 24 hours. Since the axis of rotation is perpendicular to the equator, you can think of a person standing on the equator as standing on the edge of a disc that is rotating through one complete revolution every 24 hours. Find the angular and linear velocity of a person standing on the equator. The radius of earth is approximately 4000 miles.
Answer:
ω = 7.27 x 10⁻⁵ rad/s
v = 467.99 m/s
Explanation:
First, we will find the angular velocity of the person:
[tex]Angular\ Velocity = \omega = \frac{Angular\ Distance}{Time}[/tex]
Angular distance covered = 1 rotation = 2π radians
Time = (24 h)(3600 s/ 1 h) = 86400 s
Therefore,
[tex]\omega = \frac{2\pi\ rad}{86400\ s}[/tex]
ω = 7.27 x 10⁻⁵ rad/s
Now, for the linear velocity:
[tex]v = r\omega[/tex]
where,
v = linear velocity = ?
r = radius of earth = (4000 miles)(1609.34 m/1 mile) = 6437360 m
Therefore,
[tex]v = (6437360\ m)(7.27\ x\ 10^{-5}\ rad/s)[/tex]
v = 467.99 m/s
1. What does the Work-Energy Theorem state?
Work is equal to the change in kinetic energy
Work is equal to the change in momentum
Work is equal to the change in impulse
Work is equal to the change in position
The Work-Energy Theorem states that Work is equal to the change in kinetic energy, which is the first option . This theorem is an essential principle in physics and mechanics, so first option is correct.
Work (W) is a measure of the energy transferred to or from an object by a force acting on it. It is defined as the product of the force applied to the object and the displacement of the object in the direction of the force. When a force does positive work on an object, it transfers energy to the object, increasing its kinetic energy. Conversely, when a force does negative work on an object (opposite to its direction of motion), it takes energy away from the object, decreasing its kinetic energy. So, first option is correct.
Learn more about the work-energy theorem here.
https://brainly.com/question/30560150
#SPJ6
Who watching all star draft? Luka better get picked first ong
What is the earliest time at which the oscillator shown below is stationary?
Answer:
0.0s
Explanation:
I got it right in acellus
Answer: 0.0
Explanation:
A 10 N force is used to push a 30 kg box across the floor, moving it a distance of 20 m. There is no friction. What is the magnitude of work done on the box?
A. 2 J
B. 10 J
C. 30 J
D. 200 J
The rate at which work is done is known as which of the following?
A. Power,
B. Energy,
C. Momentum,
Answer:
A , power
Explanation:
Hope this is useful. Have a lovely rest of your day! God bless you.
coefficient of viscosity of a glycerine is 8.4 poison explain
Answer:
coefficient of viscosity of 8.4 poison denotes that the tangential frictional force acting per unit area when divided by the velocity gradient as a result of streamline flow conditions gives 8.4.
Explanation:
Viscosity is defined as the extent to which a fluid can resist flow when a force is applied to it.
Now, coefficient of viscosity is the term in which viscosity is calculated. It is basically the tangential frictional force acting per unit area which is divided by the velocity gradient as a result of streamline flow conditions.
Thus, coefficient of viscosity of 8.4 poison denotes that the tangential frictional force acting per unit area when divided by the velocity gradient as a result of streamline flow conditions gives 8.4.
what dose current equal?
Pleaseee I need help!!
Answer:
R1=3.333 Ohms
R2=10 Ohms
R3=16.666 Ohms
Explanation:
30 total
30=R1+R2R3
30=1(x):3(x):5(x)
x=3.3333
R1=3.333 Ohms
R2=10 Ohms
R3=16.666 Ohms
The idea is to get as much EMF produced from the sprinter running through it. If you were the Olympic coach on a year when there happens to be a global energy crisis, and medals were assigned based on how much EMF (or current) were produced by the sprinters, what 3 pieces of advice (one is quite obvious; the other two involve the fixed orientation of the baton and the maintained position of the baton within the circular solenoid cross-section) would you give your sprinters in order to win?
Answer:
the greater the speed, the greater the electromotive force
* The metal pole must be parallel to the field
* you must keep the ball of the field
Explanation:
To determine the advice to the runners, let's use the Farad equation to and
fem = -N [tex]\frac{ d \phi}{dt}[/tex] = -N [tex]\frac{ B A Cos \theta }{dt}[/tex]
how the runners are moving
fi = B l x
fem = -N B l v
therefore the advice we can give are:
* the greater the speed, the greater the electromotive force
* The metal pole must be parallel to the field
* you must keep the ball of the field
Someone pls help!! Right now :(
a guitar string transmits waves at 509 m/s. to create a 491 Hz note, to what length should the guitar player shorten the string?
Answer:
Wavelength = 1.04 meters
Explanation:
Given the following data;
Speed = 509m/s
Frequency = 491Hz
To find the wavelength;
Wavelength = speed/frequency
Wavelength = 509/491
Wavelength = 1.04 meters
Therefore, the guitar player should shorten the length of the string to 1.04 meters.
Answer: 0.52
Explanation:
A magnet produces a magnetic field.
Which diagram shows the magnetic field pattern around a bar magnet
You Forgot To Add The Pictures
What is a potential drawback of a fast rate of reaction in industry?
Answer:
It is expensive to generate conditions for a fast reaction
Explanation:
During which sequence of phases does the moon's visibility increase
During the "waxing" phases, the two weeks immediately following the New Moon.
New Moon ==> waxing crescent ==> First Quarter ==> waxing gibbous ==> Full Moon
The phase of the moon decides the moon's visibility. The sequence of phases does the moon's visibility increases is; the waxing crescent, first quarter, waxing gibbous, full Moon.
What is the moon phase?The moon changes shape every day. This is due to the fact that the celestial body has no light of its own and can only reflect sunlight.
Only the side of the moon facing the sun can reflect this light and seem bright. The opposite side appears black. this is a full moon.
We can only see the black section when it lies between the sun and the earth when a new moon occurs. We witness intermediate phases like a half-moon and crescent in between these two extremes.
Following are the sequence of phases does the moon's visibility increase is;
1. Waxing crescent
2. First Quarter
3. Waxing gibbous
4. Full Moon
The phase of the moon decides the moon's visibility. Hence the visibility changes with the change in the phase of the moon.
To learn more about the moon's phase refer to the link;
https://brainly.com/question/2285324
Help please :)
Ultraviolet waves are transmitted by ....... ?
Answer:
Sunlight is the greatest source of UV radiation. Man-made ultraviolet sources include several types of UV lamps, arc welding, and mercury vapour lamps.
Explanation:
Which type of electricity is a one-time event, caused by unbalanced charges trying to become neutral again?
Answer: yes
Explanation:
Which of the following objects is accelerating?
Answer: A flower pot falling
Explanation:
The car on the curve (its direction is changing) and the falling flower pot (its speed is changing) are both undergoing acceleration.
an egg is Free Falling Down from a nest in a tree (neglect air resistance)
We are to calculate the acceleration.
Answer:
-9.8 m/s²
Explanation:
Since the egg is in a free fall, it means that the force due to gravity will be equal to the normal force.
Now,
Force due to gravity: F_g = mg
Normal force; F_n = ma
Thus;
mg = ma
m will cancel out to get
g = a
Since it is a free fall motion, then gravity is negative;
-g = a
g has a constant value of 9.8 m/s². Thus;
a = -9.8 m/s²