The given question is 98, 99, 100 , 90, 98 , 100
Mean= [tex]\frac{Sum of observations}{Number of observations}[/tex]
In mathematics and statistics, the average is the average of a set of values. The mean can be calculated in a number of ways, including the simple arithmetic mean (adding the numbers and dividing the sum by the number of observations), the geometric mean, or the harmonic mean.
Sum of observations is 98+99+100+90+98+100
The summation is 585
The number of observations is 6.
= [tex]\frac{98+99+100+90+98+100}{6}[/tex]
= 97.5
So, the answer is 97.5
1) Calculate the % Error when the Experimental value is 5.5 grams and the
Accepted value is 5.0 grams.
Copper is mostly utilized in generators, house and auto wiring, as well as the cables in gadgets like radios, TVs, computers, lighting, and motors due to its flexibility and good conductivity.
What led to General Motors' demise?The expenses of legacy health care and company pensions were also fixed. Therefore, many costs remained largely same as revenues declined. This resulted in losses. Due to the mounting losses and the weakening economy, GM was no longer able to operate as a profitable company.
Who currently owns General Motors?Who is the GM Company's owner? Stockholders, 12.56% General Motors Co. insiders, plus 7.47% retail investors collectively own 79.97% of General Motors Co. (NYSE: GM). The largest individual Ford Motor Co. fund is Retired person Medical Benefits Trust UAW.
To know more about Motors visit:
https://brainly.com/question/30044734
#SPJ1
How many grams of BE(NO2)2 are needed to make 550 mi of a 2.5 m solution?
The mass of Be(NO₂)₂ required to make 550 mL of a 2.5 M solution is 126.25 g.
What is the molar concentration of a solution?Molar concentration is a measurement of the concentration of a solute in a solution, in terms of the quantity of material per unit volume of solution. The number of moles per liter, represented by the unit sign mol/L or mol/dm³ in SI units, is the most common way to measure molarity in chemistry.
Mathematically;
Molar concentration = number of moles/volume in liters
The number of moles is also determined using the formula below:
Number of moles = mass/molar mass
Hence;
Molar concentration = mass / molar mass * volume in liters
Therefore:
mass = Molar concentration * molar mass * volume in liters
The molar mass of Be(NO₂)₂ = 101 g/mol
Mass of Be(NO₂)₂ required = 2.5 * 500 * 1/1000 * 101
Mass of Be(NO₂)₂ required = 126.25 g
Learn more about mass and molar concentration at: brainly.com/question/26255204
#SPJ1
How many molecules of carbon dioxide are released during one turn of the citric acid cycle?
a. 2
b. 3
c. 4
d. 6
The answer is Two molecules of carbon dioxide are released during one turn of the citric acid cycle.
Two carbons - from acetyl CoA-enter the citric acid cycle in each turn, and two carbon dioxide molecules are released. However, the carbon dioxide molecules don't actually contain carbon atoms from the acetyl CoA that just entered the cycle.
Instead, the carbons from acetyl CoA are initially incorporated into the intermediates of the cycle and are released as carbon dioxide only during later turns. After enough turns, all the carbon atoms from the acetyl group of acetyl CoA will be released as carbon dioxide.
To know more about Citric Acid Cycle:
brainly.com/question/14900762
#SPJ4
Metal. Specific heat
Aluminum 0.903
Copper 0.385
Gold 0.128
Silver 0.235
If identical quantities of heat are allowed to flow into 50.0-g samples of each of the metals, all at the same initial temperature, which of the following metals will
reach the highest temperature?
A Aluminum.
B Copper.
C Gold.
D Silver.
0. 399 g of an unknown gas at stp fills a 550. Ml flask. What is the molar mass of the gas?.
The molar mass of the gas would be 16.36 g/mole.
The formula for molar mass: M = (m.RT)/ (P.V)
P stands for the pressure of the ideal gas
V stands for the volume of the ideal gas
R stands for the universal gas constant
T stands for the temperature.
In this case, we are given that:
P = 1 atm (standard conditions)
T = 273K (standard conditions)
R = 0.082 lit. atm. K⁻¹.mol⁻¹
Mass of gas (m) = 0.399 g
Volume of gas (V) = 550 mL = 0.55 L
Therefore, the molar mass of the gas would be:
M = (m.RT)/ (P.V)
M = (0.399 x 0.08206 x 273) / (1 x 0.55)
M = 16.36 g/mole
To learn more about molar mass, click here:
https://brainly.com/question/10035610
#SPJ4
Calculate the amount in moles of H2S formed when 0. 4mol of HCl reacts with excess Sb2S3
Sb2S3+6HCl->2SbCl3+3H2S
The amount of H2S formed in the reaction of 0.4 mol of HCl with excess Sb2S3 is 1.2 moles.
To calculate the amount of H2S formed when 0.4 mol of HCl reacts with excess Sb2S3, we need to use the balanced equation for the reaction:
Sb2S3 + 6HCl -> 2SbCl3 + 3H2S
From the balanced equation, we can see that for every mole of Sb2S3, 3 moles of H2S are produced.
We have the number of moles of HCl which is 0.4 mol, and we know that HCl is in excess. So we can assume that the reaction is limited by the amount of Sb2S3.
Therefore, the number of moles of H2S produced is:
0.4 mol Sb2S3 × (3 mol H2S / 1 mol Sb2S3) = 1.2 mol H2S
So, the amount of H2S formed in the reaction is 1.2 moles.
To learn more about moles at
https://brainly.com/question/15027871?referrer=searchResults
#SPJ4
Although we usually think of substances as "burning" only in oxygen gas, the process of rapid oxidation to produce a flame may also take place in other strongly oxidizing gases. For example, when iron is heated and placed in pure chlorine gas, the iron "burns" according to the following (unbalanced) reaction:
Fe (s) + Cl₂ (g) -> FeCl3 (s)
How many grams of iron(III) chloride (FeCl3) result when 15.5 g of iron (Fe) is reacted with an excess of chlorine gas? Balance the equation first.
The balance equation for this reaction is 2Fe (s) + 3Cl₂ (g) → 2FeCl3 (s) 45.1grams of iron(III) chloride (FeCl3) result when 15.5 g of iron (Fe) is reacted with an excess of chlorine gas.
What is balance equation ?The balance chemical equation in which reactant are exactly equal to the product.
The balance equation for this reaction is 2Fe (s) + 3Cl₂ (g) → 2FeCl3 (s)
2 mole Fe = 2 mole FeCl₃
molar ratio = 2 mole FeCl₃ / 2 mole Fe
Atomic mass of Fe = 55.85g/mol
Thus,15.5mg of iron = 15.5mg × 1.0g / 10 ³mg
15.5 × 10 ⁻³gFe
= 2.78 × 10 ⁻⁴ mole of Fe
The molar mass of a FeCl₃ = 162.2g/mol
Therefore, amount of FeCl₃ produced = 0.0451g
= 45.1 mg
Thus, 45.1grams of iron(III) chloride (FeCl3) result when 15.5 g of iron (Fe) is reacted with an excess of chlorine gas.
To learn more about the balance equation, follow the link;
https://brainly.com/question/7181548
#SPJ1
Share your thoughts on the genetic modification of crops and food for the purpose of disease treatment in humans. Example: genetically inserting medicine into food to prevent diseases, the way current vaccines work.
Genetic modification of crops and food have both advantages and disadvantages. These techniques create desired characteristics in crops but latter that might affect our health as well.
What is genetic modification ?Plants and animals can be genetically modified to create desired characteristics in them. Gene techniques such as CRISPER are nowadays becoming popular in agricultural field.
Features such as rapid growth, extra production, coloring, change in size, antibacterial properties, climate survival etc. can be imparted to plants by genetic engineering.
However, genetically modified crops make some health issues some times. It has been reported that, some genetically modified vegetables causes sever health impacts.
Find more on genetic modifications:
https://brainly.com/question/16733706
#SPJ1
Please help, will give brainiest
QUESTION 1.
Element X on Planet Qatar has three known isotopes: X-121 with a relative abundance of 43.2%, X-123 with a relative abundance of 53.1%, and X-129 with a relative abundance of 3.70%. What is the average atomic mass in amu of Element X given this information?
QUESTION 2.
How did Rutherford's experiment change the way scientists had previously viewed atomic structure? How did this pave the way for subsequent changes up to and including the currently accepted quantum mechanical atomic model?
QUESTION 3.
How is percent abundance related to average atomic mass?
Answer 1
The average atomic mass in a.m.u of Element X given this information is 122.358.
Answer 2
Rutherford's experiment change the way scientists had previously viewed atomic structure as it provided insight into atomic structure.
Rutherford's experiment paved the way for subsequent changes up to and including the currently accepted quantum mechanical atomic model as his model of the atom, the structure of the nucleus became more well-defined following the discovery of protons (1919) and neutrons (1932) as the particle constituents of the nucleus.
Answer 3
The percent abundance is related to the number fraction as fi = Pi/100 and used as in the formula written above in order to find average mass
What is atomic structure?Atomic structure refers to the structure of an atom comprising a nucleus (centre) in which the protons (positively charged) and neutrons (neutral) are present.
The average atomic mass in a.m.u of Element X given this information is ((121 * 43.2) + (123 * 53.1) + (129 * 3.70)) / 100
=5227.2 + 6531.3 + 477.3
=12235.8 / 100
122.358
Rutherford's experiment change the way scientists had previously viewed atomic structure as it provided insight into atomic structure, and Rutherford's model of the atom was proposed as a small, positive, massive nucleus contains the very vast majority of the mass of the entire atom with negatively charged electrons surrounding it at relatively large distances.
Rutherford's experiment paved the way for subsequent changes up to and including the currently accepted quantum mechanical atomic model as his model of the atom, the structure of the nucleus became more well-defined following the discovery of protons in 1919 and neutrons in 1932 as the particle constituents of the nucleus.
It was during the 1920s that a "wave mechanical model" came along through the work of several physicists most importantly de Broglie, Heisenberg, and Schrodinger) and Bohr's concept of electrons "orbiting" the nucleus was abandoned in favor of "orbitals" which are more abstract probabilistic representations of electronic structure within an atom.
Learn more about atomic structure at: https://brainly.com/question/25653224
#SPJ1
Causes of carbon monoxide poisoning
Car as well as truck engines emit fumes (smoke) that contain carbon monoxide. tinier gasoline engines Fu el burning space warmers (not electric).
The inhalation of combustion gases might result in carbon monoxide pois oning. Your body substitutes carbon monoxide for the oxygen in human red blood cells whenever you have too enough carbon monoxide in the air you are breathing. Due to this, oxygen cannot reach your bo dy's tiss ues as well as org ans.
The majority of CO- poiso ning deaths are due to fires, although about one-third are also brought on by stoves, portable heaters, as well as car exhaust. These are frequently linked to exhaust system problems or obstructions, as well as suic ide attempts.
To know more about carbon monoxide
https://brainly.com/question/1238847
#SPJ4
the elements and compounds present after a chemical reaction are called the ___________.
The elements and compounds present after a chemical reaction are called the products.
Zn will replace the metal in the ionic compound LiF : true or false
Zn will replace the metal in the ionic compound LiF . false
What is metal ?
Metal is a hard material composed of a variety of elements, such as iron, aluminum, nickel, zinc, copper, lead, tin, and others. Metals are malleable, ductile, and generally have high electrical and thermal conductivity.
Metals can be polished to a shine and are often used in a variety of applications such as jewelry, construction, manufacturing, and many more. Metals are also used in many industries including automotive, aerospace, and medical. Metal is a durable and versatile material that is used for a variety of applications, from industrial to decorative.
To learn about more metal .
https://brainly.com/question/4701542
#SPJ1
Explain the trend for the last successive ionization energies for 2nd period of elements (Li, Be, B, C, N, O, F, Ne).
In general, ionization energy increases across a period and decreases down a group. Across a period, effective nuclear charge increases as electron shielding remains constant.
Define ionization energies?The ionization energy is a metric indicating an element's capacity to engage in chemical processes that call for the donation of electrons or the production of ions. It is also often correlated with the type of chemical bonding that occurs when elements combine to form compounds. Additionally see electron affinity and binding energy.The least amount of energy needed to free the most loosely bound electron from an isolated gaseous atom, positive ion, or molecule is known as the ionization energy in physics and chemistry.The amount of energy required for an isolated, gaseous atom to discharge an electron, creating a cation, is known as the ionization energy.To learn more about ionization energies refer to:
https://brainly.com/question/1445179
#SPJ4
If a car takes 5 seconds to increase its speed from 2 m/s (4.5 mph) to 18 m/s (40 mph, what is its acceleration in m/s2?
please show work
If a car takes 5 seconds to increase its speed from 2 m/s (4.5 mph) to 18 m/s (40 mph), then its acceleration in m/[tex]{s}^2[/tex] is 16 m/[tex]{s}^2[/tex], as it is found by subtracting the final velocity from the initial and dividing by the time.
What is acceleration, and what is its importance in cars?It explains how the velocity of a car changes over time and can be calculated by subtracting the final velocity from the initial and dividing by the time; the calculation is given below.
acceleration (a) = (final velocity - initial velocity) / time
a= 18 m/s - 2 m/s / 5 sec
a=16 m/[tex]{s}^2[/tex]
Hence, if a car takes 5 seconds to increase its speed from 2 m/s (4.5 mph) to 18 m/s (40 mph), then its acceleration in m/[tex]{s}^2[/tex] is 16 m/[tex]{s}^2[/tex], as it is found by subtracting the final velocity from the initial and dividing by the time.
Learn more about the acceleration here.
https://brainly.com/question/12550364
#SPJ1
If you were to heat up a 1-kilogram rock and 1 kilogram of water you would see that the rock both gains heat and loses heat faster than the water. If you allow them to cool down which one will come back to room temperature faster?
You would observe that the rock absorbs heat more quickly than the water and releases it more slowly. The rock will reach room temperature more quickly if you let them cool.
How come land loses heat more quickly than water?The majority of solar radiation that hits water's surface is reflected back into the atmosphere. Given that land absorbs more solar radiation, both the land's surface and the vegetation it supports retain more heat.
Soil or water will release heat more slowly.Water absorbs and releases heat more slowly than land because its specific heat is higher than that of dry soil. Due to the high heat capacity of water, large bodies of water often tend to moderate the temperature of neighboring land.
To learn more about latent heat visit:
brainly.com/question/28044951
#SPJ1
PLS HELP MULTIPLE CHOICE!!!
no links pls!
Refer to the following unbalanced equation: C6H₁4 + O₂ →→ CO₂ + H₂O What mass of oxygen (O₂) is required to react completely with 21.5 g of C6H₁4?
37.9 g
6.54 × 10³ g
75.8 g 7.98 g
0.250 g
Oxygen Consider the following improper equation: O2 → CO2 + Oxygen ( o2 + C6H14 How much carbon dioxide (CO2) could be created by combining 11.2 g of C6H14 with 37.9 g of extra oxygen.
What controls the direction that this chemical reaction, CO2 h2o H2CO3 H+ HCO3, takes?Carbonic acid, or H2CO3, is created when CO2 and water combine. This acid is in mixture with co2 (HCO3-) and h+ (H+). The following phase of the reaction is influenced by changes in the concentrations of reactants on either of the equation's sides.
How are CO2 emissions determined?Billion British thermal unit (MMBtu) are converted to therms, and then the carbon coefficient, the fraction oxidized, and the proportion of the molecular mass of atmospheric co2 to carbon are multiplied to get the greenhouse gas emissions per therm.
To know more about Oxygen visit :
https://brainly.com/question/13370320
#SPJ1
Calculate the ratio of H* ions to OH-ions at a pH = 7.
Find the concentration of H* ions to OH ions listed in
Table B of your Student Guide. Then divide the H*
concentration by the OH concentration. Record this
calculated ratio in Table A of your Student Guide.
Compare your approximated and calculated ratios of H+
ons to OH-ions at a pH = 7. Are they the same? Why or
why not? Record your comparison in Table A.
What is the concentration of H+ ions at a pH = 7?
mol/L
What is the concentration of OH-ions at a pH = 7?
mol/L
What is the ratio of H+ ions to OH-ions at a pH = 7?
:
Please help!! Worth 100 points!!
a) The concentration of the hydrogen ions is 1 * 10^-7 M
b) The concentration of the hydroxide ions is 1 * 10^-7 M
c) Ratio of the hydrogen to the hydroxide ion is 1:1
What is the pH?We know that the pH of the solution would have to do with ratio of the hydrogen ion and the hydroxide ions that we have in the solution. We know that the pH values that range from 0 -6 is acid, 7 is neutral and 8 - 14 is basic.
Then we have that;
Concentration of the hydrogen ion in the solution is obtain from the formula;
[H^+] = Antilog (-pH)
At pH 7 we have;
[H^+] = Antilog (-7)
= 1 * 10^-7 M
Learn more about pH:https://brainly.com/question/15289714
#SPJ1
is it true that Kelp and plants can break down starch into sugar and use it to grow and release in the process only when it is dark?
Answer:
Yes it's true ooooooooo
how many atoms of oxygen are in 1.50 moles of aluminum oxide?
The process that takes place when liquid changes to a gas (a type of vaporization that occurs below the boiling point.)
Answer:
Evaporation
Explanation:
Evaporation is the process by which a liquid changes to a gas below the boiling point of the liquid.
How can you compare the rates of effusion of two gases in a mixture?
You can compare the rates of effusion of two gases in a mixture by their molecular weights.
The square root of a gas's molecular weight has an inverse relationship with the rate of effusion of that gas. Therefore, you may compute the square roots of two gases' molecular weights and then invert that ratio to compare the rates of effusion of the two gases in a mixture.
The rate of effusion will be slower for the gas with the greater molecular weight and faster for the gas with the lower molecular weight.
For instance, the ratio of two gases' rates of effusion is given by R = (M1 / M2)-1 if their molecular weights are M1 and M2, respectively.
If you want to learn more about molecular weight of gases, click here
https://brainly.com/question/24128362?referrer=searchResults
#SPJ4
How does a sea breeze affect the weather?
A.
It decreases land temperatures near the ocean.
B.
It increases land temperatures near the ocean.
C.
It decreases rain formation over land near the ocean.
D.
It increases the cloud coverage over the land near the ocean.
Pls help!!
Answer:
it decreases land temperature near the ocean
Draw the structure of the cycloalkane 1, 4-dimethylcyclohexane. Draw the molecule on the canvas by choosing buttons from the Tools (for bonds), Atoms, and Advanced Template toolbars. The single bond is active by default. Include all hydrogen atoms
The parent component in the structure of 1,4- dimethyl cyclohexane is cyclohexane, which has two methyl groups attached at the first and fourth positions of the carbon ring.
Cyclohexane is a saturated hydrocarbon with the molecular formula CₙH₂ₙ where n represents the number of carbon atoms present in the organic compound. They are represented as simple polygons with the sides representing carbon-carbon bonds. Each carbon atom is held together by two hydrogen atoms. A molecule's multiple rings may share one or more common atoms. One carbon atom is shared by two rings in spirocyclic compounds. These compounds are uncommon.
According to the IUPAC system, cycloalkanes are named with the prefix cyclo-.
Learn more about saturated hydrocarbons here
https://brainly.com/question/25762783
#SPJ4
Correctly classify each of the following compounds as highly soluble or as either slightly soluble or insoluble in water.
ionic and polar compounds are highly soluble in water whereas the covalent and organic compounds are highly insoluble in water
What is the difference between soluble and insoluble?Soluble fiber dissolves in water, and includes plant pectin and gums. Insoluble fiber doesn't dissolve in water. It includes plant cellulose and hemicellulose. Most plants contain both soluble and insoluble fiber, but in different amounts.Soluble fiber is found in foods such as oat bran, barley, nuts, seeds, beans, lentils, peas, and some fruits and vegetables. Insoluble fiber appears to speed the passage of foods through the stomach and intestines and adds bulk to the stool. It is found in foods such as wheat bran, vegetables and whole grains.Soluble means capable of dissolving in a solvent whereas insoluble means incapable of dissolving in a solvent.To learn more about soluble and insoluble refers to:
brainly.com/question/23946616
#SPJ4
Which of these is an
example of a chemical
property?
A. Potassium.ignites when placed in water.
B. Sodium metal is soft and malleable.
C. Aluminum is a shiny, silver color.
D. Iron melts at 1,535 °C.
Answer:
B
Explanation:
I know but I can't answer well. We might to choose the best answer so the answer is possible to be B.
Please help Chemistry
5.0 mol Al reacts with 6.0 mol O2 to
form Al2O3.
4AI + 302 → 2Al2O3
How many moles of Al2O3 form
when all 5.0 moles of Al are used up?
[ ? ] mol Al2O3
Round your answer to the tenths place.
The amount of the aluminum oxide that is formed is 2.5 moles.
What is the number of moles formed?We must have it at the back of our minds that in the case of the questions that involves stoichiometry, the limiting reactant can be said to be the compound that is used up in the reaction.
We are told here that the substance that has been used up in this reaction is the aluminum then it means that this must be the limiting reactant here.
If 4 moles of aluminum produces 2 moles of aluminum oxide
5 moles of aluminum would produce 5 * 2/4
= 2.5 moles of aluminum oxide.
Learn more about stoichiometry:https://brainly.com/question/9743981
#SPJ1
If a reaction appears to result in a change of mass, it is usually because a reactant or product that is a __________ has not been taken into account. What word completes the sentence?
Answer:Gas is the answer
Draw the structure of 5-tert-butyl-2-methyl-3-octyne.
The structure is attached with the answer. 5-tert-butyl-2-methyl-3-octyne is a hydrocarbon molecule with a chain of 14 carbon atoms, so it is an alkyne.
At the beginning of the chain is a triple bond, which is the characteristic feature of an alkyne. The chain also contains two methyl and one tert-butyl group. The methyl group is attached to the second carbon atom in the chain, while the tert-butyl group is attached to the fifth carbon atom in the chain.
This molecule has a total of 20 hydrogen atoms, with three hydrogen atoms attached to each of the carbon atoms in the chain. 5-tert-butyl-2-methyl-3-octyne is a relatively reactive molecule because of its triple bond. This molecule can undergo a variety of reactions, including addition reactions, oxidation reactions, and substitution reactions. The reactivity of this molecule makes it a useful chemical in a variety of industrial and laboratory applications.
To know more about triple bonds refer to the link brainly.com/question/19331363
#SPJ4
Use this graphic to explain how matter is conserved in a nuclear reaction
Nuclear processes alter the sorts of atoms present, but chemical reactions do not. The electrons in the atom play a significant role in chemical reactions when nucleus reactions occur in atom nuclei.
What is nuclear explain?The energy found in an atom's nucleus, or core, is known as nuclear energy. Energy maintains the nucleus of atoms together, the minuscule units that make up all matter in the universe. The dense nucleus of an atom has an enormous quantity of energy.
Why is a nuclear threat a threat?The most lethal weapons on earth are nuclear weapons. One can wipe out an entire metropolis, perhaps killing millions of people, endangering the ecosystem and the lives of future generations due to its long-term devastating impacts.
To know more about Nuclear visit:
https://brainly.com/question/18187269
#SPJ1
How might the atoms {metals differ from on another?
Atoms of different metals can differ in number of protons, electron configuration, atomic radius, melting/boiling point, hardness/ductility, and conductivity.
what is difference between atom metals with one another?
Atoms of different metals can differ from each other in a number of ways, including:
Number of protons: The number of protons in the nucleus of an atom determines its atomic number and thus its identity as an element. Different metals will have different atomic numbers and therefore different numbers of protons.Electron configuration: The arrangement of electrons in the outermost shell of an atom, also known as the valence electrons, determine the chemical properties of an element. The electron configuration of different metals will be different.Atomic radius: The size of an atom is determined by its atomic radius. Different metals will have different atomic radii.Melting and boiling point: The melting and boiling points of different metals will vary depending on the strength of the metallic bond holding the atoms together. Generally, metals with stronger metallic bonds will have higher melting and boiling points.Hardness and ductility: The hardness and ductility of a metal depend on the crystal structure and the strength of metallic bonds. Harder metals are less ductile and more brittle, while softer metals are more ductile and less brittle.Conductivity: The ability of a metal to conduct electricity is related to the number of free electrons in the outermost shell of its atoms, the metallic bond strength, and the atomic radius. Different metals will have different conductivity.To learn more about atom refer:
brainly.com/question/17545314
#SPJ1