What is the surface area of disk if it's circumstance is 30cm?

The area of the disk, AD = ㅤㅤ Units.

Answer the same question for a perfect square with the perimeter 30cm.

The area of the square, As = Units.

The correct answer is C. amount of duckweed.

Independent variables are variables that can be manipulated or changed to observe their effects on a dependent variable. In other words, they are the input of a system. Examples of independent variables include temperature, time, and concentration. These variables are independent of each other and can be changed simultaneously or individually to observe their effects on the outcome.

The dependent variable in Chen's experiment is the amount of duckweed, which is represented on the y-axis of the graph. The independent variables in this experiment are the different water pH levels, which are represented on the x-axis. By plotting the amount of duckweed against the different water pH levels, Chen was able to analyze the effect of the different pH levels on the growth of duckweed.

To know more about independent variables click-
https://brainly.com/question/571013
#SPJ4

A proton travels down the path depicted in Figure 1 at a speed of 2.67 x 106 m/s as it passes through point P. v0 = 2.8 106 m/s is the initial speed. 3.0 mm, -10 nC, 4.0 mm Vo.

The speed of an object, also known as v in kinematics, is a scalar quantity that refers to the size of the change in that object's position over time or the size of the change in that object's position per unit of time.

v₂^2= 2/(1.67 x 10^-27) [9 x 10^9 x 10 x 10] x [1.67 x 10^27] x [2.2 x 10^6]

= [9 x 10^9 x 10 x 10^9 x 1.6 x 10^19 (1/0.003 - 1/0.005)]

= 2.67 x 10^6 m/s,

v2 = 1.44 x 1023, and v22 = 7.14 x 10^12

Learn more about speed here

https://brainly.com/question/28224010

#SPJ4

The force that must be stronger than when sliding a box across the floor is the friction force. Friction is the resistance of motion when two objects rub together.

What is resistance ?

Resistance is the opposition to the flow of electrons or other particles. It is measured in ohms, and is the ratio between voltage and current in an electrical circuit.

Resistance is a fundamental property of materials and is related to the amount of energy needed to push electrons through them. It is also affected by temperature, humidity and other environmental factors. Resistance is an important factor in electrical engineering and is vital for determining the power and efficiency of electrical systems.

To learn abot more resistance .

brainly.in/question/19540047

#SPJ4

The height of the hill is 15 m.

The height of the hill is calculated by applying the principle of conservation of energy as shown below.

Kinetic energy at the bottom of the hill = Potential energy at the top of the hill

mgh = ¹/₂mv²

gh = ¹/₂v²

h = ( v² ) / ( 2g )

where;

h = ( v² ) / ( 2g )

h = ( 17.15² ) / ( 2 x 9.8 )

h = 15 m

Learn more about Height of hill here: https://brainly.com/question/24219606

#SPJ1

Answer:

Approximately [tex]71.6\; {\rm N}[/tex] (assuming that [tex]g = 9.81\; {\rm N \cdot kg^{-1}}[/tex].)

Explanation:

Refer to the diagram attached. Forces on this object are:

Assuming that [tex]g = 9.81\; {\rm N \cdot kg^{-1}}[/tex], the magnitude of the weight of the sign would be:

[tex]\begin{aligned}(\text{weight}) &= m\, g \\ &= (7.30\; {\rm kg})\, (9.81\; {\rm N\cdot kg^{-1}}) \\ &\approx 71.6\; {\rm N}\end{aligned}[/tex].

Note that weight points downwards (negative) and is entirely in the vertical direction. As a result, the [tex]y[/tex]-component of weight would be equal to [tex](-71.6)\; {\rm N}[/tex].

Hence, the [tex]y[/tex]-component of these forces would be:

Since forces on the object to be balanced, forces need to be balanced in each component. For forces in the [tex]y[/tex]-component to be balanced, forces in the vertical direction need to add up to [tex]0\; {\rm N}[/tex]:

[tex]0\; {\rm N} + (-71.6)\; {\rm N} + (\text{$y$-component of tension on the right}) = 0\; {\rm N}[/tex].

Hence, the [tex]y[/tex]-component of the tension from the wire on the right end would be [tex]71.6\; {\rm N}[/tex].

Because the t procedures are robust, the most important condition for their safe use is that the data can be regarded as an SRS from the population.

The fact that we have three possibilities is the most crucial requirement for their safe use. There are at least 15 samples. The distribution of the population is quite normal. The information can be viewed as a SRS from the well-known ship, thus we need to determine the best course of action. So, only small sample sizes are used when the t procedure is needed. In order to ensure that the best condition sample is chosen at random, these three The samples have a minimum of 15. Therefore, the data in this case can be viewed as a representative sample of the population. So here the answer will be the data can be regarded as an SRS from the population.

To know more about t procedures, click here:-

https://brainly.com/question/15833960

#SPJ4

The following sentence  A frame of reference is not necessary to describe motion accurately and completely is False.

To know more about frame of reference visit

https://brainly.com/question/12222532

#SPJ1

The molar mass of copper (II) carbonate and copper (II) hydroxide is 221.13 g/mol. The equation for the balanced reaction is CuCO3.Cu(OH)2 2CuO + CO2 + H2O.

It is also an electrical solid compound made of carbonate anions CO2 and copper (II) cations Cu2+. Most frequently, a basic copper carbonate, such as Cu2(OH)2CO3, is referred to as cupric carbonate or copper carbonate.

Malachite, a green crystalline solid, is what it looks like in nature. It has been used as a pigment since antiquity and is currently employed as one in artist paints. This substance is also known as verditer, emerald bice, and mountain green.

To know more about equation visit:

https://brainly.com/question/14447594

#SPJ4

2344 J is the Binding Energy Of 2/1 H .

What is Energy ?

Energy, in physics the ability to do work. It can exist in electrical, kinetic, thermal, electrical, chemical, nuclear, or various other forms. There is also heat and work. H. After transmission, energy is always referred to according to its nature. Thus, the heat transferred can become thermal energy, while the work done can appear as mechanical energy. All forms of energy are associated with movement. For example, any object has kinetic energy when it is in motion. A taut device such as a bow or spring can create motion even when stationary. Because of its composition, it contains potential energy. Similarly, nuclear energy is potential energy as it results from the composition of subatomic particles within the nucleus .

To learn more about energy ,click the given link;

brainly.com/question/13881533

#SPJ4

The Big Bang theory is the prevailing cosmological model that explains the origins of the universe. According to the theory, the universe began as a singularity, a hot and infinitely dense point, approximately 13.8 billion years ago. From this singularity, the universe expanded and cooled, eventually leading to the formation of subatomic particles, atoms, stars, and galaxies. The theory also states that the universe is still expanding and it's getting cooler and larger.

The theory was first proposed by Belgian priest and physicist Georges Lemaître in 1927 and later developed by Edwin Hubble's observations of the redshifts of distant galaxies in the 1920s and 1930s. The theory has been extensively tested and supported by a wide range of observational evidence, including cosmic microwave background radiation and the large-scale structure of the universe.

To learn more about the big-bang theory:

brainly.com/question/15421576

Answer:

The Big-Bang Theory is the prevailing cosmological model for the universe from the earliest known periods through its subsequent large-scale evolution. The model describes how the universe expanded from an initial state of high density and high temperature, and offers a comprehensive explanation for a broad range of phenomena, including the abundance of light elements, the cosmic microwave background, large scale structure and Hubble's law. According to the Big-Bang Theory, the universe was once in an extremely hot and dense state which expanded rapidly. As it cooled, the first subatomic particles formed and then simple atoms, eventually leading to the formation of stars and galaxies. The Big-Bang Theory is supported by a wide range of scientific observations and provides a comprehensive explanation for the structure and evolution of the universe.

Answer of part A and Part B is given below.

Wavelength is a measure of the distance between two successive crests or troughs on a wave. It is measured in the same physical units as the length, such as meters (m) or feet (ft). Wavelength is most commonly used to describe light waves, but it can also be applied to sound waves, water waves, and other types of waves. Wavelength is inversely related to the frequency of a wave, meaning that waves with shorter wavelengths have higher frequencies. In optics, the term "wavelength" is used to describe the frequency of visible light, which ranges from 380 to 780 nanometers.

Part A
On average, each mercury atom emits 6.2x10^7 ultraviolet photons per second.
Part B
The average time that a mercury atom spends in the excited state is 12 µs.

To know more about wavelentgh click-
https://brainly.com/question/10728818
#SPJ4

The magnitude and (b) the direction of the electric field at O, the center of the semicircle is E = 2.16 × 10⁷ N/C and direction is Left.

Each location in space where a charge exists in any form can be considered to have an electric field attached to it. The electric force per unit charge is another name for an electric field. The electric field's equation is given as E = F / Q.

Due to symmetry,

Ey = ∫ dEy = 0,

and E¸ = − ∫ dE sin θ

= −ke∫  dq sinθ/ r2

where

dq=λds = λrdθ;

the component Ex is negative because charge q = -750µC,

causing the net electric field to be directed to the left.

Ex = Κeλ/r ∫ Sinθ

= - (Keλ) (- Cos θ) / r

= -2Keλ / r

where λ and r = L/ π.

Thus,

Ex = 2Ke |q|Π / L²

= [- 2(8.99 × 10⁹ N. m²/С²)(7.50 × 10 С)π] / (0.140 m)2

Ex = -2.16 × 10⁷ N/C

(a) magnitude E = 2.16 × 10⁷ N/C

(b) the direction of the electric field at O, the center of the semicircle is Left.

To learn more about Electric field from given link

https://brainly.com/question/14372859

#SPJ4

When an object is positioned in front of the focal point of a converging lens, a virtual image is created. The image is magnified and upright in this posture, making it simpler to view.

The image is actual and inverted as long as the object is outside of the focal point. The image becomes virtual and upright when the object is inside the focal point. When the item is positioned inside the focal length, converging lenses can also create virtual images. Since it will be farther away from the lens than the object in that scenario, the virtual picture will be upright and expanded.

Learn more about focal length here-

https://brainly.com/question/29870264

#SPJ4

The turntable's angular velocity at t = 1.5 s is 1.5 rad /s from the angular acceleration graph.

When there is non-uniform circular motion, the rate of change in angular velocity (i.e., angular acceleration) is =t. = t. A t = v t denotes linear or tangential acceleration, which describes changes in velocity's magnitude but not its direction.

The turntable's angular velocity at t = 1.5 s

Angular acceleration( α )from the figure at t=1.5 s is 1 rad/s2.

      α => ω / t

      ω => α x t = 1 rad/s2 x 1.5 s

           => 1.5 rad /s

The angular acceleration points in the same direction as the angular velocity if the angular velocity is rising and growing. The angular acceleration points in the opposite direction of the angular velocity if the angular velocity is decreasing.

Learn more about angular velocity here:

brainly.com/question/29557272

#SPJ4

A moral and social wellspring was the source of the moral quality of the vote that dried up the country.Protecting human life was a sincere desire.The lives of women and children gave this wish a tangible and compelling form.

To learn more about Prohibition refer

https://brainly.com/question/27862866

#SPJ1

A refrigerator that accepts heat from a low-temperature reservoir also rejects heat to the same reservoir.

To learn more about refrigerator refer to :

https://brainly.com/question/11014767

#SPJ4

There is some excess negative charge on the surface of the wire near location B. Because the current is not changing, the circuit is in static equilibrium. There is no excess charge on the surface of the wire.

Static electricity is the buildup of extra electric charge on an object. Gauss's law tells us that in an equilibrium state, any excess charge on a conductor travels to the surface. The extra charges will disperse evenly throughout the conductor's outside surface, causing the electric field within to be zero.

Electrons are free to move in a conductor. If they are subjected to a force, they will move faster in that direction. If an external electric field is applied to a conductor, a force F = -eE results. When the field is present, electrons move faster and gain momentum in the opposite direction.

Learn more about electric field here:

/brainly.com/question/15800304

#SPJ4

All answers about capacitor is given below.

To answer these questions, we need to use the equation Q = CE, where Q is the charge on the capacitor, C is the capacitance, and E is the voltage across the capacitor.

For the 3.0 μF capacitor, the charge is Q = (3.0 μF)(15 V) = 45 μC.

For the 4.0 μF capacitor, the charge is Q = (4.0 μF)(15 V) = 60 μC.

For the 6.0 μF capacitor, the charge is Q = (6.0 μF)(15 V) = 90 μC.

To know more about capacitor click-
https://brainly.com/question/13578522
#SPJ4

0 is the correct answer .

What is angle ?

In Euclidean geometry, an angle is a figure formed by two rays, called the sides of the angle, that share a common endpoint called the vertex of the angle. The angle formed by two rays is in the plane containing the rays.  These are called dihedral angles. Two intersecting curves can also define an angle. This is the angle of the ray tangent to each curve at the point of intersection.

Angle is also used to indicate a measure of angle or rotation. This measure is the ratio of the arc length to the radius of the circle. In geometric angles, arcs are centered at vertices and bounded by edges. For rotation, the arc is centered around the rotation and surrounded by all other points and its image by rotation.

To learn more about angle  ,click the given link;

https://brainly.com/question/25716982

#SPJ4

b. it is moving in the direction of the field

When a charged particle is moving in a magnetic field, it experiences a force called the Lorentz force. The direction of this force is perpendicular to the both, the velocity of the particle and the magnetic field. If the velocity of the particle is in the same direction as that of the magnetic field, the Lorentz force is in the direction of the velocity of the particle. If the velocity of the particle is perpendicular to the magnetic field, the Lorentz force is also perpendicular to the velocity of the particle.

To know more about  Lorentz force  click below:

https://brainly.com/question/28211140#

#SPJ4

The dielectric constant of water, also known as the relative permittivity of water, is approximately 80.

The dielectric constant, also known as the relative permittivity, is a measure of a material’s ability to resist the flow of electric current when electric field is applied. It is a ratio of the amount of electric field needed to make a material conduct electric current compared to that of a vacuum. The higher the dielectric constant of a material, the more electric field is needed to make it conduct electric current. Common materials with high dielectric constants include glass, plastics, rubber, and water.

This is the ratio of the electric field of water to the electric field of a vacuum, which is calculated by dividing the speed of light in a vacuum (3.00 × 10^8 m/s) by the speed of light in water (2.26 × 10^8 m/s). This ratio indicates that the electric field of water is 80% of the electric field of a vacuum, meaning that the dielectric constant of water is 80.

To know more about dielectric constant click-
https://brainly.com/question/13873821
#SPJ4

Answer: Condensation of liquid sweat on the skin

Explanation:

The jupiter's mass=1.898×10^27 kg ,  In 2 significant figures  =1.9×10^27 kg  The total mass of the Galilean moons =3.93×10^23 .

What does Total mass means?

Total mass is the sum of all the individual masses of the components within a system. It is a measure of the total amount of matter within the system, and is typically expressed in units such as kilograms, pounds, or grams. Total mass can be used to calculate the total amount of energy that is stored in a system, and is an important quantity in physics, chemistry, and materials science.

What does Material Science means?

Material Science is the study of the properties and characteristics of materials and their applications in engineering and technology. It is an interdisciplinary field that involves physics, chemistry, and engineering. It is also known as Materials Science and Engineering and encompasses the study of the structure and behavior of materials at various scales, from the atomic and molecular level to the macroscopic and microscopic scale.

To more about Total mass,

https://brainly.com/question/28021242

#SPJ4

(a) The estimate of the definite integral using the Midpoint Rule with m = n = 2 is 1952

(b) The estimate of the average value of f is 30.5.

The Midpoint Rule formula for approximating the definite integral is:

∫∫f(x,y)dA ≈ (A/mn) ∑∑f(x_i, y_j) where,

In this case, A = 64, m = n = 2. So we can compute the function value at the midpoint of each sub-rectangle and multiply it by the area of the sub-rectangle. The midpoints of the sub-rectangles are located at (2,2), (2,6), (6,2), and (6,6).

∫∫f(x,y)dA ≈ (64/4) [ f(2,2) + f(2,6) + f(6,2) + f(6,6) ] = (64/4) [ 1952 ] = 1952

(a) Use the Midpoint Rule with m = n = 2 to estimate the value of f(x,y) dA. R (Round your answer to the nearest integer.) 1952

(b) (1/A) ∫∫f(x,y)dA

So in this case it would be (1/64) * 1952 = 30.5

Estimate the average value of f. (Round your answer to one decimal place.) 30.5

Therefore, the estimate of the definite integral using the Midpoint Rule with m = n = 2 is 1952, and the estimate of the average value of f is 30.5.

Learn more about the Midpoint Rule here:

https://brainly.com/question/30079030

#SPJ4

The focal length is 4.28cm and the magnification is 7.

What is focal length ?

A lens's focal length is established when it is focused at infinity. We can determine the magnification—how large individual elements will be—and the angle of view—how much of the picture will be captured—by knowing the focal length of the lens. The angle of view is smaller and the magnification is greater the longer the focal length.

What is angular magnification ?

The ratio between the angle that the image of an object at an unaided eye or without the apparatus subtends and the angle that the image subtends at the microscope is known as the angular magnification of the object.

We have the lens equation

1/ f = 1/ u = 1/ V

Here the image is virtual

so V  = - 30

1/ f = 1/ u - 1/ v

1/ 5= 1/ u -1/ 30

1/5 + 1/ 30 = 1/ u

u = 4.28cm

magnification

m = -v/u

= - (-30)/ 4.28

= 7

Therefore, the focal length is 4.28cm and the magnification is 7.

Learn more about focal length from the given link.

https://brainly.com/question/1031772

#SPJ4

Answer:

Explanation:

The index of refraction (n) of a gem can be calculated using the formula:

n = c / v

where c is the speed of light in a vacuum (approximately 3 x 10^8 m/s) and v is the speed of light in the gem.

In this case, we know that the speed of light in the gem is l.q5 x 10^8 m/s. So, we can plug this value into the formula and calculate the index of refraction:

n = c / v = (3 x 10^8 m/s) / (l.q5 x 10^8 m/s) = 3 / l.q5

The value of n is a dimensionless number and it's usually between 1 and 2.

It's not possible to identify the gem using the index of refraction alone. There are many gems with similar indexes of refraction. Index of refraction alone is not enough to identify a gem. The gemstone's color, brilliance, and other physical and optical properties must be taken into account to identify it.

The index of refraction of the unknown gem is 1.54.

The index of refraction measures how a light beam bends when it travels through different media.

The refractive index is calculated by dividing the speed of light at a given wavelength in in vacuum space by its speed of light in that medium.

The speed of light in that gem = 1.95 × 10⁸ meter/second

The index of refraction of the unknown gem is = (speed of light in vacuum/speed of light in that gem)

= (3 × 10⁸ meter/second)/(1.95 × 10⁸ meter/second)

= 1.54.

Learn more about  index of refraction here:

https://brainly.com/question/23750645

#SPJ1

The instantaneous rate of change of the centrifugal force as the velocity increases to 830 m/sec is 4.14×106 N/sec.

What is velocity?
Velocity is a measure of the rate of change of the position of an object over time. It is a vector quantity, meaning it has both direction and magnitude. Velocity is determined by dividing the displacement of the object by the time it took to get there.

The centrifugal force exerted on rotating turbine blades is directly proportional to the square of velocity, such that F = kv2, where k is a constant. Therefore, the rate of change of the centrifugal force with respect to the velocity (dF/dv) can be expressed as:

dF/dv = 2kv

Substituting the values given, we have

dF/dv = 2(1.21×106 N/[550 m/sec]2) × 830 m/sec

dF/dv = 4.14×106 N/sec

Therefore, the instantaneous rate of change of the centrifugal force as the velocity increases to 830 m/sec is 4.14×106 N/sec.

To learn more about velocity
https://brainly.com/question/24445340

#SPJ4

The diagram shows the possible energy levels that an atom can occupy. The atom is assumed to have two electrons, shown by the two distinct circles.

What is atom?
Atom is a free and open-source text editor created by GitHub that works on the three major operating systems; Windows, Mac and Linux. It is a highly customizable text editor that can be used for coding, writing and editing. It offers a wide range of features such as syntax highlighting, multi-cursor editing, automatic indentation, and auto-completion.

There are two main energy levels, the ground state and the excited state. The ground state is the lowest energy level, and the excited state is the highest energy level that the atom can occupy. In between these two levels are the intermediate energy states, which the electrons can transition between.

To learn more about atom
https://brainly.com/question/621740

#SPJ4

Large droplets in a cloud will scatter lower frequency light. The cloud will therefore seem reddish.

The term "hygroscopicity" refers to how much water an aerosol absorbs under a particular set of environmental conditions. Inorganic salts are the species that are most hygroscopic in the atmosphere. However, due to advantageous hydrogen-bonding interactions with water, oxygenated organic compounds can also be hygroscopic. Surface-active organic species further promote hygroscopicity by lowering surface tension. Not only can oxidation reactions in the atmosphere significantly contribute to increasing hygroscopicity by adding oxygen scattering, but they may also have an impact on how surface material is partitioned, which in turn affects cloud formation by causing changes in surface tension.

Learn more about scattering here-

https://brainly.com/question/9922540

#SPJ4

If, at a given time, the position of a subatomic particle is precisely known, then no other particles can have the same position.

What is particles?

Particles are the smallest and most fundamental units of matter. They are the building blocks of all matter and are composed of one or more atoms. Particles are classified into two broad categories: subatomic particles, which are particles that are smaller than an atom and make up the structure of an atom, and atomic particles, which are particles that can form atoms. Subatomic particles include protons, neutrons, and electrons, while atomic particles include ions, atoms, and molecules. Particles interact with other particles through forces such as the strong nuclear force, electromagnetic force, and weak nuclear force. Particles can also exist in a variety of states, including solid, liquid, and gas.

To learn more about particles

https://brainly.com/question/94094

#SPJ4