What reagent causes the observed visual change in a positive Lucas test?
The observed visual change from a clear and colourless characteristic to a turbid, cloudy, and hazy characteristic, in a positive Lucas test, is caused by the Lucas reagent.

Answer:

It can be done by crystallization, filtration, and sublimation. The easiest method among the three is separation by sublimation. Ammonium chloride sublimes upon heating. Actually, the sublimation is a decomposition of ammonium chloride forming ammonia and hydrogen chloride

Explanation:

The theoretical yield of water in this reaction is 1 mole (18.015 grams) of water.

Theoretical yield is the amount of a product one would expect to yield from a reaction if it proceeds to completion, according to a balanced chemical equation. It is calculated by multiplying the limiting reactant by the molar ratio between the reactants and the products. The actual yield of a reaction is usually lower than the theoretical yield, due to a number of factors such as incomplete conversion of reactants to products, product losses, and impurities in the reactants. Theoretical yield is used to calculate the percentage yield of a reaction, which is the ratio of the actual yield to the theoretical yield multiplied by 100.

To learn more about theoretical yield
https://brainly.com/question/30068550
#SPJ4

Answer:

360.g water

Explanation:

The answer is 20.46g.

As we know that

1 mole of CO2 has 6.02 x 10^23 molecules of CO2.

Now, let's say x moles of CO2 has 2.80 x 10^23 molecules of CO2.

Therefore,

               x = 2.80 x 10^23 / 6.02 x 10^23 = 0.465

As, M = nmr

  M = 0.465 *( 12 + 2x16)

      = 0.465 *( 12 + 32)

      = 0.465 * 44

      = 20.46g

Give a succinct description of how the various alkene reactants were combined to create the same result. The most stable intermediate carbocation will arise as a result of an electrophilic proton addition in the reaction between HCl and both alkenes.

The observed product is produced in both cases by adding Cl- to the tertiary carbocation that is produced. By figuring out the physical properties of the reactants and products, negative entropy in chemical processes may also be calculated. Gas molecules are widely spaced apart and move randomly in all directions, which results in high entropy in gases. Being a liquid converting into a solid, water freezing into ice is an entropy-reducing process. Due to the molecules' reduced freedom of movement, a solid has less chaos. A negative entropy reaction occurs when hydrogen and oxygen combine to generate water.

To learn more about carbocation please click on below link

https://brainly.com/question/13164680

#SPJ4

H2(g) + Cl2(g) = 2 HCl (g) AH-184.6 kJ where the mathematical notation for "is equivalent to" is. However, we also have a quantity called energy change in our thermochemical equation

Thermochemical equations are symmetric chemical equations that take into account both the energy change and the physiological state of all products and reactants. When energy is a reactant, a reaction is endothermic; whereas, when energy is a product, a reaction is exothermic.

A balance empirical formula with its heat per reaction is known as a thermochemical equation. They appear to be equal to A+B+C+H=Xjoules. You are already proficient at creating and balancing chemical equations. Therefore, all we must do is add either H or U values.

To know more about Thermochemical equation visit:

brainly.com/question/2874342

#SPJ1

If it forms ions with ammonium in the ratio of (NH4)3X, X could be in Group IV A. Group IVA (14) metals form cations with +4 charge, although tin (Sn) and lead (Pb) can form cations having +2 charge.

A covalent link (a shared pair of electrons) in which both electrons originate from the same atom is known as a coordinate bond (also known as a dative covalent bond). Two atoms sharing a pair of electrons make a covalent connection. Because the electron pair is drawn to both nuclei, the atoms are kept together.

An arrow pointing from the donor to the acceptor, with a positive charge on the donor and a negative charge on the acceptor, is used to symbolize a coordinate bond.

To learn more about coordinate bond visit:

brainly.com/question/12857081

#SPJ1

1.08 moles of water () produced by the reaction of 0.90mol of oxygen.

Explanation:

Moles of oxygen given = 0.90 mole

Moles of water are to be calculated.

Step 1 : Write the chemical reaction and balance it.

5 mole of  reacts with 4 mole of  to give 4 moles of NO and 6 moles of .

Step 2 : Calculate moles of water () utilising  mole ratio.

The coefficient of  is 6 and coefficient of  is 5, So mole ratio of  to  is 6 : 5

Moles of  = 0.90 × 6 (moles of ) ÷ 5 (moles of )

Moles of  = 1.08 moles

1.08 moles of  is produced by the reaction of 0.90 mole oxygen ()

For more information on moles visit: https://brainly.com/question/26416088

#SPJ4

At 298 K and 1 atm, bromine is a liquid with high vapor pressure, while chlorine is a gas. This proves that the intermolecular forces of bromine are greater than those of chlorine under these conditions.

At a temperature of 298 K and a pressure of 1 atm, bromine is in a liquid state due to the strong attraction between Br-Br molecules.

At the same temperature and pressure, chlorine exists in the gaseous state due to covalent bonds, while bromine has non-polar covalent bonds.

Learn more about covalent bond visit:

brainly.com/question/12661797

#SPJ4

Dissolve NaOH into the Solution will - Increased E

Increase the temperature - Increased E

Increase the amount of [tex]PbCl_{2}[/tex] - No change in E

Dilute the solution by adding [tex]H_{2}O[/tex] - Increased E              

E= Voltage or the electromotive force generated in the cell

Dissolving NaOH will increase the conductivity and number of ions in the cell and Increases E .  Adding water also increases the presence of hydrogen and hydroxide ions in the solution and Increases E.

To learn more about EMF

brainly.com/question/17205920

#SPJ4

The goal of the light reaction is to make NADH an high energy electron transporter and ATP an energy storing molecule.

The energy storage molecule ATP and the reduced electron carrier NADPH are produced by the light-dependent processes using light energy, which is required for the subsequent stage of photosynthesis. Light reactions in plants occur in the thylakoid membranes of organelles referred to as chloroplasts.

The light reactions are largely controlled by photosystems, sizable complexes of proteins and pigments (light-absorbing molecules) that are designed to capture light. Photosystem I (PSI) and Photosystem II are the two different types of photosystems (PSII).

Both photosystems have a variety of pigments that aid in the absorption of light energy as well as a unique pair of chlorophyll molecules at the reaction center. P700 denotes the special pair of photosystem I, while P600 denotes the unique pair of photosystem II.

Learn more about light reaction

brainly.com/question/13349357

#SPJ4

No, because  every M&M's is identical.

M&M's contain the same amount of protons, M&M's are the same hue. In other words, the size represents the various neutron counts.

Atoms of the same chemical element called isotopes each have a distinct mass number.

While isotopes can vary in mass, they never do so in atomic number (the amount of protons). You will use M&Ms to represent atoms because we are unable to see them. These objectives are use in M&Ms to determine the average atomic mass and to observe how different isotopes are.

In this the number show how many M&M's of that color and size are packed into that bags.

To know more about, Isotopes click here:

brainly.com/question/11680817

#SPJ4

The remaining mass of hydrogen that is present in the reaction is 0.20 grams.

The balanced chemical reaction can be depicted as follows:

2H2+O2---->2H2O

1 mole of Oxygen reacts with 2 moles of Hydrogen in order to produce two moles of water i.e., H2O.

0.15 moles of O2  reacts with 2 * 0.15 = 0.30 moles of H2

The moles of H2 are given i.e., 0.40 moles.

So remaining = 0.40 moles - 0.30 moles = 0.10 moles

Thus, the mass of H2 can be calculated by multiplying the number of moles with the molar mass that is expressed as follows:

Mass = moles * molar mass

Molar mass of H2= 2 g/mol

Mass of H2 remained in the reaction = 0.10 moles * 2 g/mole = 0.20 grams.

To learn more about number of moles check the link below:

https://brainly.com/question/28037816

#SPJ4

The final concentration of the mixture depends on the value of x.

Value is the worth of something. It can refer to the monetary worth of an item or service, the usefulness of something, or the importance of an idea, belief, or experience. Value is a subjective concept and can vary from person to person. Generally, it is the positive attributes that an individual or group associates with something that determines its value. The economic concept of value is based on the idea that the value of a good or service is determined by its cost, supply, and demand.

The final concentration of the mixture is equal to:
(200 mL x 10%) + (x mL x 40%) / (200 mL + x mL)

To learn more about Value
https://brainly.com/question/25134328
#SPJ4

We can use the distance when the meter stick fell before you caught it to figure out your reaction time.  

Meterstick is either a straightedge or foldable ruler which is used to measure a  length, and is especially common in the construction industry. They are often made up of wood or plastic, and often have metal or plastic joints so that they can be folded together. Metersticks are usually divided with lines for each millimeter (1000 per meter) and numerical markings as per centimeter (100 per meter), with the numbers or either in centi- or millimeter.

Formula is the basis: d = 1/2 gt2. In this formula, “d” is equals to the distance the object fell, “g” equals to gravitational acceleration (9.8 m/s2), and “t” is the time the object was falling.

To know more about meterstick here

https://brainly.com/question/29690562

#SPJ4

The density of chlorine will be  3.163 g/L.

The mass of a substance per unit of volume is its density. According to Graham's law, a gas's rate of effusion is inversely proportional to its square root density. When a material's particles are concentrated in a low area, they tend to travel to the place where the concentration is highest. When we use perfume or a scented spray in one area of the room and subsequently can smell it throughout the entire space, that is a simple illustration of this process.

rate1 = H2 = 5.93

rate2 = Cl2 = 1

The molecular weight of H2 = 2.016

The molecular weight of Cl2 = x.

By Graham's Law:

5.93 / 1 = x / 2.016

35.1649 = x / 2.016

x = 70.89 g/mol

Determine gas density by volume

70.89 g / 22.414 L = 3.163 g/L

Learn more about Density

brainly.com/question/28929608

#SPJ4

Answer:

Explanation:

The lupac name of this compound is 2-Oxohexanoic acid. This compound is composed of two oxygen atoms, six carbon atoms, and one hydrogen atom. The parent chain is made up of six carbon atoms, and the functional group is a carboxylic acid group (COOH)

A neutral atom of Nitrogen will have seven protons.

The symbol given for Nitrogen is N, the atomic number 7. Atomic number is equivalent to the number of protons in an atom. So, for Nitrogen, the number of protons is 7.

A neutral atom is an atom which consists of the same number of protons and the same number of electrons. Neutral atoms will have the equal number of protons in the nucleus as they have electrons orbiting the nucleus.

In a neutral atom, the total charge on the atom is zero. Atom has same number of protons and electrons in it. For example, neutral atom of Sodium, with atomic number 11, has 11 protons and 11 electrons in its neutral state.

Learn more about protons at: https://brainly.com/question/12535409

#SPJ4

The protein concentration is higher than that of interstitial fluid. The intracellular fluid (ICF) is the fluid inside cells, and is composed of water, electrolytes, and organic molecules.

The intracellular fluid (ICF) is the fluid inside cells, and is composed of water, electrolytes, and organic molecules. Common properties of ICF include high concentrations of potassium ions and low concentrations of chloride ions compared to interstitial fluid. The protein concentration of ICF is lower than that of interstitial fluid.

The protein concentration is higher than that of interstitial fluid.

learn more about fluid here

https://brainly.com/question/28445909

#SPJ4

There are 0.034 x 1019 = 10¹⁹ moles of molecules in 10 g of aspartame.

Avogadro's constant, 6.022 1023, and the molar mass of the material are used to calculate the number of molecules in a given mass of the substance. Aspartame's molecular formula is C14H18N2O5.

Aspartame has a molecular mass of 294 (12 * 14 + 1 * 18 + 14 * 2) + 16 * 5)

Let's convert the 10 mg mass supplied to aspartame moles as follows:

Amount of moles =

= 0.034 × 10 ⁻⁵ mole

We may convert this number to molecules using Avogadro's constant as follows:

= 0.034 × 10 ⁻⁵ (6.022 × 10²³)

= 0.034 × 10¹⁹

To learn more about molecules please click on below link

https://brainly.com/question/19922822

#SPJ4

In the chemical equation,Cl₂ (g) + K+ Br− → K+ Cl− + Br₂ (g) bromine looses an electron in the reaction.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature

A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature. In other words, while the mass is fixed and the volume is constant, the pressure a gas exerts is proportional to the temperature of the gas.

In the year 1808, French scientist Joseph Gay-Lussac created this law. Gay-law Lussac's can be expressed mathematically as follows:

P ∝ T ; P/T = k

Where:

P is the pressure that the gas is applying.

T is the gas's actual temperature, while k is a fixed value.

The tire pressure of a car increases after driving. This is due to the air inside the tires heating up as a result of friction (a contact force) between the tires and the road. Gay-Law Lussac's states that because the air cannot expand because the tires are effectively fixed-volume containers, the pressure rises.

To know more about  Gay-Lussac's law refer to:

https://brainly.com/question/2683502

#SPJ1

Answer:

correct answer is 0.165 moles by calculation

The basketball velocity is 40 m/s.

A vector quantity with both size and direction is velocity. In respect to time, it is the rate with which a displacement changes. Using the formula velocity = displacement/time, velocity may be computed. It is a way to gauge how quickly something is moving in a certain direction. Acceleration, or the rate at which an object's velocity changes, is closely related with velocity. Being a vector quantity, velocity has both a direction and a magnitude. An object must move at the a constant speed and in the same direction in order to maintain a constant velocity.

To learn more about velocity
https://brainly.com/question/29215982
#SPJ4

Answer: 4 ATP molecules is produced in the glycolysis of 2 glucose molecules

The first stage of most carbohydrate catabolism, which is described as the breakdown of larger molecules into smaller ones, is glycolysis, which is a part of cellular respiration. Two Greek words that mean "to break down anything sweet" are the source of the word glycolysis. Two molecules of ATP are created during the breakdown of glucose and formation of pyruvate during glycolysis.

Explanation:

2 ATP are produced.

For every glucose molecule, meaning that for every 2 glucose molecules, 4 ATP will be created.

For more information on ATP visit: https://brainly.com/question/174043

#SPJ4

The ocean current is caused by differences in water density. The difference in the density of water is mainly caused by the temperature and salinity of water.

Density of a substance is the measure of its mass per unit volume. It describes how closely its particles are packed within a given volume. Density of a substance is dependent on the temperature and pressure also.

The density of water is affected by the temperature and salinity. Water has its maximum density at 4 ° C. The more saline is water, more will be the density. Because, more ions or salts makes water denser.

The density vary with variations in temperature and salinity. This variation causes water currents from the denser areas to the less dense areas. Ocean currents are also affected by the gravity.

Find more on ocean currents:

https://brainly.com/question/14426457

#SPJ2

Answer:

2H2 +O2 - 2H20

4g of H react to give 36g of H20

20g of H gives Xg of H20

cross multiply

4x= 36*20

4x= 720

Xg = 720/4

Xg= 180g approximately

That is A which is 179

If the amount of H2 is doubled, then two moles of water have been created.

Hydrogen and water molecular interactions

Since one mole of H2 is required for the synthesis of one mole of water, doubling the amount of H2 would result in the formation of two moles of H2O. Hydrogen concentration and water content are connected. Five moles of water can be created if there are five moles of hydrogen available.

Similar to this, if 10 moles of hydrogen are accessible, ten moles of water can be produced, leading us to believe that if the amount of H2 is doubled, two times as many moles of water have been formed.

To learn more about mole visit;

brainly.com/question/1427235

#SPJ4

If you perform a melting point test on a metal sample, you would expect to observe that the metal has a relatively high melting point compared to non-metallic materials. This is because of the strong electrostatic forces between the positive nuclei of the metal atoms and the negative electrons, which hold the metal atoms together in a tightly packed lattice structure. As a result, a large amount of energy is required to overcome these forces and melt the metal.

Metal samples are expected to be excellent conductors of heat and electricity when a conductivity test is performed on them. This is because electrons in metallic solids move through the metal fairly easily and are free to move around the lattice structure. This free movement of electrons allows heat and electricity to easily pass through the metal, making it highly conductive.

Learn more about the properties and behavior of metals here: https://brainly.com/question/5190495

#SPJ4