Model not supported is:
Thomson's atomic model of the atom from task 1 are not supported by Rutherford's experimental evidence.
Experiments given by Thomson, Rutherford & Dalton:
The cathode ray tube experiments of J.J. Thomson demonstrated that all atoms contain minute, electron-like subatomic particles that are negatively charged.The plum pudding model of the atom was put up by Thomson and featured negatively charged electrons embedded within a positively charged "soup."The majority of an atom is empty space, with a small, dense, positively-charged nucleus, as demonstrated by Rutherford's gold foil experiment.Rutherford postulated the nuclear model of the atom in light of these findings.Atoms, in Dalton's opinion, are the tiniest pieces of matter that can never be further divided. This belief persisted up until the time it was learned that the atom was made up of subatomic particles.Dalton and Thomson's concepts are in conflict with the experimental findings of Rutherford. Dalton's model is unsupported by evidence because it does not include electrons, protons, or neutrons.
Learn more about atomic model here,
https://brainly.com/question/27990920
#SPJ4
bicycle tire that has a volume of 0.85l is inflated to 140 pounds per square inch. what will be the pressure in the tire if the tire expands to 0.95l at a constant temperature
The new pressure in the bicycle tire when it expands to 0.95 L at constant temperature is approximately 124.21 psi. The relationship between the volume and pressure of a gas. According to Boyle's Law, the volume of a gas is inversely proportional to its pressure at a constant temperature.
In this case, the initial volume of the bicycle tire is 0.85l and it is inflated to 140 pounds per square inch. To find the initial pressure in the tire, we can use the formula:
Pressure = Force / Area
The formula for Boyle's Law is:
P1V1 = P2V2
44.59 pounds per square inch x 0.85l = P2 x 0.95l
P2 = (44.59 pounds per square inch x 0.85l) / 0.95l
P2 = 39.79 pounds per square inch (rounded to two decimal places)
P1V1 = P2V2.
Given:
P1 (initial pressure) = 140 psi
V1 (initial volume) = 0.85 L
V2 (final volume) = 0.95 L
We need to find P2 (final pressure).
Using the equation, P1V1 = P2V2:
(140 psi)(0.85 L) = P2(0.95 L)
Now, solve for P2:
P2 = (140 psi)(0.85 L) / 0.95 L
P2 ≈ 124.21 psi.
To know more about temperature visit :-
https://brainly.com/question/29072206
#SPJ11
consider a substance with a melting point of 176 k. if this substance is in a container at 115 k what will the value be for ∆suniv for the process of melting this substance, in kj? (∆hfus= 239 kj/mol)
we need to use the formula for Gibbs free energy change (∆G) which is:∆G = ∆H - T∆S ∆H is the enthalpy change, T is the temperature in Kelvin, and ∆S is the entropy change.
we know that the substance has a melting point of 176 K, which means that at temperatures below this point, the substance is a solid and above this point, it is a liquid. We also know that the substance has a heat of fusion (∆Hfus) of 239 kJ/mol.
∆suniv for the melting process, we need to consider both the entropy change (∆S) and the enthalpy change (∆H). The entropy change for the melting process can be calculated using the equation
To know more about Kelvin visit:
https://brainly.com/question/28938811
#SPJ11
how might a reductive amination be used to synthesize penbutolol, an amino alcohol pharmaceutical derived from propanolamine? g
Reductive amination be used to synthesize penbutolol, an amino alcohol pharmaceutical derived from propanolamine.
Reductive amination is described as a process which is also known by the name of reductive alkylation. This is described as a form of amination that is marked with carbonyl group conversion.
Penbutolol, an amino alcohol pharmaceutical, can be synthesized using reductive amination by starting with propanolamine. The reductive amination process involves the condensation of propanolamine with an appropriate aldehyde followed by the reduction of the imine intermediate to form the desired amino alcohol. Here's a step-by-step explanation of the synthesis:
Acylation of Propanolamine: Propanolamine is first acylated to protect the amino group. This is typically done by reacting propanolamine with an acylating agent such as acetic anhydride or acetyl chloride. The reaction forms the corresponding N-acyl propanolamine.
Formation of the Iminium Ion: The N-acyl propanolamine is then reacted with an appropriate aldehyde, such as benzaldehyde, in the presence of an acid catalyst, typically HCl or H2SO4. The reaction forms an iminium ion intermediate, which is a Schiff base.
Reduction to Amino Alcohol: The iminium ion intermediate is then reduced to the desired amino alcohol, penbutolol. This reduction step is typically achieved using a reducing agent like sodium cyanoborohydride (NaBH3CN) or sodium triacetoxyborohydride (NaBH(OAc)3). The reduction converts the iminium ion into the amine, resulting in the formation of penbutolol.
Deprotection: Finally, if any protecting groups were introduced in step 1 to protect the amino group, they can be removed using appropriate deprotecting conditions. The resulting compound is penbutolol, an amino alcohol pharmaceutical derived from propanolamine.
It's important to note that the specific reaction conditions, reagents, and protecting groups may vary depending on the synthetic protocol and the desired purity of the final product.
To know more about Penbutolol:
https://brainly.com/question/14090801
#SPJ4
--The given question is incomplete, the complete question is:
"How might a reductive amination be used to synthesize Phenylpropanolamine, an amino alcohol pharmaceutical derived from propanolamine? Draw the structure of the aldehyde/ketone and the amine that would be used to synthesize this compound."--
what would happen to the ag and cl− concentrations if nacl(s) was added to a saturated solution of agcl in water?
Answer to the question would be that the addition of NaCl(s) to a saturated solution of AgCl in water would not affect the Ag+ concentration but would increase the Cl- concentration.
When NaCl(s) is added to the saturated solution of AgCl, the Na+ and Cl- ions dissociate from the solid and enter the solution. However, since AgCl is already saturated, the addition of more Ag+ ions from the NaCl(s) will not dissolve and instead remain as a solid. Therefore, the Ag+ concentration remains the same.
On the other hand, since Cl- is the anion of both AgCl and NaCl, the addition of NaCl(s) increases the concentration of Cl- ions in the solution. This can cause more AgCl to dissolve until the solution reaches a new equilibrium where the concentration of Ag+ and Cl- ions is once again equal to the solubility product constant.
To learn more about saturated solution visit:
brainly.com/question/1851822
#SPJ11
The active ingredient in milk of magnesia is Mg(OH)2. Complete and balance the following equation. Mg(OH)2 + _____
The active ingredient in milk of magnesia is Mg(OH)₂. Complete and balance the following equation: Mg(OH)₂ + 2 HCl → MgCl₂ + 2 H₂O.
To balance the equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation. We can start by counting the number of atoms of each element in the reactants and products:
Reactants: Mg(OH)₂ + HCl
Products: MgCl₂ + H₂O
Mg: 1 Mg in reactants, 1 Mg in products (balanced)
O: 2 O in reactants, 2 O in products (balanced)
H: 4 H in reactants, 2 H in products (not balanced)
Cl: 1 Cl in reactants, 2 Cl in products (not balanced)
To balance the equation, we can add a coefficient of 2 in front of HCl to balance the hydrogen atoms, and a coefficient of 1 in front of MgCl₂ to balance the chlorine atoms:
Mg(OH)₂ + 2 HCl → MgCl₂ + 2 H₂O
Now the equation is balanced, with 2 atoms of Mg, 4 atoms of O, 6 atoms of H, and 2 atoms of Cl on both sides.
To know more about milk of magnesia, refer here:
https://brainly.com/question/1619275#
#SPJ11
how many grams of cu are obtained by passing a current of 12 a through a solution of cuso4 for 15 minutes? (molar mass of cu is 63.55 g/mol)
Passing a current of 12 A through a solution of CuSO4 for 15 minutes will produce 7.14 grams of copper.
To determine the amount of copper (Cu) obtained by passing a current of 12 A through a solution of CuSO4 for 15 minutes, we need to use Faraday's laws of electrolysis.
Faraday's first law states that the amount of substance produced at an electrode is directly proportional to the quantity of electricity passed through the cell. The proportionality constant is known as the Faraday constant (F) and is equal to 96,485 coulombs per mole of electrons.
To calculate the amount of Cu produced, we need to first calculate the total charge that passes through the solution using the following equation:
Q = I × t
where Q is the total charge in coulombs, I is the current in amperes, and t is the time in seconds.
Converting the time of 15 minutes to seconds, we get:
t = 15 × 60 = 900 s
Substituting the given values, we get:
Q = 12 A × 900 s = 10,800 C
The number of moles of electrons transferred during this process can be calculated using the following equation:
n = Q / F
where n is the number of moles of electrons and F is the Faraday constant. Substituting the given values, we get:
n = 10,800 C / 96,485 C/mol = 0.112 mol
Since the reaction between CuSO4 and electrons from the electrode produces one mole of Cu per mole of electrons, the amount of Cu produced can be calculated by multiplying the number of moles of electrons by the molar mass of Cu:
mass of Cu = n × molar mass of Cu
mass of Cu = 0.112 mol × 63.55 g/mol
mass of Cu = 7.14 g
For more such questions on solution visit:
https://brainly.com/question/25326161
#SPJ11
What is the equilibrium constant expression for the reaction below? 2 CaSO4(s) 2 Ca0(s) + 2 SO2(g) + O2(g) a. Kc= [CaO)/[CaSO4] Kc= [SO2]2[02] b. d. Kc= [S02][02] e. Kc=1/5012[O2]
The answer to the question is option d. The equilibrium constant expression for the given reaction is Kc= [S02][02].
The equilibrium constant expression is a mathematical representation of the ratio of product concentrations to reactant concentrations at equilibrium. In this reaction, the products are CaO, SO2, and O2, and the reactant is CaSO4.
The balanced chemical equation for the reaction is 2 CaSO4(s) → 2 CaO(s) + 2 SO2(g) + O2(g). Using this equation, we can write the expression for the equilibrium constant (Kc) as follows:
Kc= [CaO]^2[SO2][O2]/[CaSO4]^2
However, we can simplify this expression by noting that the concentration of CaO and CaSO4 are solid and therefore constant. Therefore, we can remove them from the expression, leaving us with:
Kc= [SO2][O2]/[CaSO4]^2
Further simplifying the expression, we get option d:
Kc= [S02][02]
To learn more about equilibrium constant visit:
brainly.com/question/10038290
#SPJ11
enter the net ionic equation for the reaction of aqueous sodium chloride with aqueous silver nitrate. express your answer as a chemical equation. view available hint(s)
Answer;The net ionic equation for the reaction of aqueous sodium chloride with aqueous silver nitrate is:
Ag+ (aq) + Cl- (aq) → AgCl (s)
In this reaction, the silver cation (Ag+) from the silver nitrate reacts with the chloride anion (Cl-) from the sodium chloride to form solid silver chloride (AgCl) as a precipitate. The net ionic equation shows only the species that participate in the reaction, which are the ions that undergo a change in oxidation state or form a precipitate.
The complete ionic equation for the reaction is:
Na+ (aq) + Cl- (aq) + Ag+ (aq) + NO3- (aq) → Na+ (aq) + NO3- (aq) + AgCl (s)
This equation shows all the ions present in the reaction, both the reactants and the products, in their ionic forms. However, it also includes spectator ions (Na+ and NO3-) that do not participate in the reaction and remain unchanged.
Learn more about net ionic equations and ionic reactions.
https://brainly.com/question/29116785?referrer=searchResults
#SPJ11
Maleic acid is a diprotic acid with ionization constants a1=1. 20×10−2 and a2=5. 37×10−7. Calculate the pH of a 0. 296 M potassium hydrogen maleate ( KHM ) solution
The pH of a 0.296 M potassium hydrogen maleate (KHM) solution is 2.34. This calculation is based on the ionization constants of maleic acid (a diprotic acid) and the concentration of the KHM solution.
The pH of a solution is a measure of its acidity or basicity, and is defined as the negative base-10 logarithm of the concentration of hydrogen ions (H+) in the solution. To calculate the pH of a KHM solution, we first need to consider the ionization of maleic acid.
Maleic acid is a diprotic acid, which means it can donate two hydrogen ions to a solution. The first ionization constant (a1) of maleic acid is 1.20x10^-2, which means that it partially ionizes in water to release H+. The second ionization constant (a2) is much smaller, at 5.37x10^-7, meaning it only partially ionizes a second time.
The KHM solution contains maleic acid, as well as its potassium salt, so we need to consider both species when calculating the pH. Using the ionization constants and concentration of KHM, we can calculate the concentration of H+ in the solution and convert it to pH.
The final pH value of 2.34 indicates that the KHM solution is acidic, with a relatively high concentration of H+.
Learn more about acidic here.
https://brainly.com/questions/29796621
#SPJ11
how many joules of heat must be removed to lower the temperature of a 36.5 g al bar from 84.1 °c to 56.8 °c? the specific heat of al is 0.908 j/g °c. group of answer choices 240 j 1090 j 905 j 581 j
The amount of heat that must be removed to lower the temperature of the aluminum bar from 84.1 °C to 56.8 °C is 1090 J.
The formula for calculating heat energy (Q) is given as Q = m × c × ΔT. This formula relates the amount of heat energy transferred to a substance with the mass, specific heat capacity, and temperature change of the substance. In this question, we are given the mass of the aluminum bar (m = 36.5 g), the specific heat capacity of aluminum (c = 0.908 J/g °C), and the change in temperature (ΔT = 84.1 °C - 56.8 °C = 27.3 °C). By substituting these values in the formula, we can calculate the amount of heat energy (Q) that must be removed to lower the temperature of the aluminum bar. The answer is 1090 J.
The specific heat capacity of a substance is the amount of heat energy required to raise the temperature of one gram of the substance by one degree Celsius. It is given in units of joules per gram per degree Celsius (J/g °C). The specific heat capacity of aluminum is 0.908 J/g °C. This means that it requires 0.908 joules of heat energy to raise the temperature of one gram of aluminum by one degree Celsius. By knowing the specific heat capacity of aluminum, we can use the formula Q = m × c × ΔT to calculate the amount of heat energy required to change the temperature of the aluminum bar by a certain amount.
To know more about aluminum visit:
https://brainly.com/question/9496279
#SPJ11
Reactions of Ethers and Epoxides 18-44 Predict the products of the following ether cleavage reactions: (a) (b) CH3 CH2CH3 CF3CO2H H20 2 H3C CH3 HI 7 (c) CH3 H2C=CH-0-CH2CH3 HI H2O ? (d) CH3CCH2-O-CH2CH3 CH3 HI H20 ?
The product would be: a. [tex]CH_3CH_2^+ + CH_3CH_2OH + CF_3CO^{2-}[/tex]
b. [tex]H_3C-I + CH_3CH_2-I + H_2O[/tex]
c. [tex]H_3CCH_2OH + CH_3CH_2I[/tex]
d. [tex]CH_3CCH_2OH + CH_3CH_2I[/tex]
(a) The reaction of an ether with a strong acid like [tex]CF_3CO_2H[/tex] can lead to the cleavage of the ether bond and the formation of two carbocations. In this case, the product would be:
[tex]CH_3CH_2^+ + CH_3CH_2OH + CF_3CO^{2-}[/tex]
(b) The reaction of an ether with HI can lead to the cleavage of the ether bond and the formation of two alkyl halides. In this case, the product would be:
[tex]H_3C-I + CH_3CH_2-I + H_2O[/tex]
(c) The reaction of an ether with HI and subsequent reaction with water can lead to the formation of an alcohol and an alkyl halide. In this case, the product would be:
[tex]H_3CCH_2OH + CH_3CH_2I[/tex]
(d) The reaction of an ether with HI and subsequent reaction with water can lead to the formation of an alcohol and an alkyl halide. In this case, the product would be:
[tex]CH_3CCH_2OH + CH_3CH_2I[/tex]
Note that in both (c) and (d), the reaction can proceed via an SN1 mechanism in which the leaving group (the ether oxygen) departs to form a carbocation intermediate.
The carbocation can then react with the nucleophilic iodide ion to form the alkyl halide, while the protonated alcohol can undergo deprotonation to form the final alcohol product.
For more question on product click on
https://brainly.com/question/16859279
#SPJ11
CORRECT QUESTION
CLICK IMAGE
(a) Acid-catalyzed hydrolysis reaction
(b) Nucleophilic substitution reaction
(c) Nucleophilic substitution reaction
(d) Acid-catalyzed hydrolysis reaction
When it comes to predicting the products of ether cleavage reactions, it's important to consider the specific conditions of each reaction. Here are the predictions for the reactions you provided:
(a) CH3 CH2CH3 CF3CO2H H20 2 H3C CH3
This is an acid-catalyzed hydrolysis reaction, which will break the ether bond and form two alcohol products. The specific products will depend on the specific ether being cleaved, but in general, the products will be a primary alcohol (CH3CH2OH) and a tertiary alcohol (H3CCH3OH).
(b) HI 7
This is a classic example of a nucleophilic substitution reaction, in which the iodide ion (I-) acts as a nucleophile and attacks the ether carbon to break the bond and form an alkyl iodide product. In this case, the products will be H3CCH2I and CH3I.
(c) CH3 H2C=CH-0-CH2CH3 HI H2O
This reaction is also a nucleophilic substitution reaction, but the specific conditions are different. In this case, the hydroxide ion (OH-) from water acts as a nucleophile to attack the ether carbon and break the bond. The products will be H3CCH=CH2 (an alkene) and CH3OH (a primary alcohol).
(d) CH3CCH2-O-CH2CH3 CH3 HI H20
This is another acid-catalyzed hydrolysis reaction, similar to part (a). The ether bond will be broken and two alcohol products will be formed. The specific products will depend on the specific ether being cleaved, but in general, the products will be a primary alcohol (CH3CH2OH) and a secondary alcohol (CH3CH2CH2OH).
Learn more about nucleophilic substitution reaction, and acid-catalyzed hydrolysis reaction click here:
https://brainly.com/question/23970995
#SPJ11
Calculate the cell potential at 25?C for the cell
Fe(s)?(Fe2+(0.100 M)??Pd2+(1.0 è 10-5 M)?Pd(s)
given that the standard reduction potential for Fe2+/Fe is -0.45 V and for Pd2+/Pd is +0.95 V.
a. +1.16 V
b. +1.28 V
c. +1.52 V
d. +1.68 V
I need the full steps to get to the solution.
The cell potential at 25°C for the given cell is +1.16 V. Answer A is correct.
The cell potential can be calculated using the Nernst equation:
Ecell = E°cell - (RT/nF)ln(Q)
where E°cell is the standard cell potential, R is the gas constant (8.314 J/mol·K), T is the temperature in kelvin (25°C = 298 K), n is the number of electrons transferred in the balanced half-reactions, F is the Faraday constant (96,485 C/mol), and Q is the reaction quotient.
First, write the balanced half-reactions:
Fe(s) → Fe2+(aq) + 2 e-
Pd2+(aq) + 2 e- → Pd(s)
The overall reaction is the sum of the half-reactions:
Fe(s) + Pd2+(aq) → Fe2+(aq) + Pd(s)
The standard cell potential is:
E°cell = E°(cathode) - E°(anode) = +0.95 V - (-0.45 V) = +1.40 V
The reaction quotient Q can be calculated using the concentrations of the species involved:
Q = [Fe2+] / [Pd2+]^2
Substitute the values given:
Q = (0.100 M) / (1.0×10^-5 M)^2 = 1.0×10^7
Substitute all the values into the Nernst equation:
Ecell = +1.40 V - (8.314 J/mol·K / (2 × 96,485 C/mol)) × ln(1.0×10^7)
Ecell = +1.16 V
Option A.
For more such questions on Nernst equation
https://brainly.com/question/21601855
#SPJ11
The cell potential at 25°C for the given cell is +1.16 V. Answer A is correct.The cell potential can be calculated using the Nernst equation:
Ecell = E°cell - (RT/nF)ln(Q)where E°cell is the standard cell potential, R is the gas constant (8.314 J/mol·K), T is the temperature in kelvin (25°C = 298 K), n is the number of electrons transferred in the balanced half-reactions, F is the Faraday constant (96,485 C/mol), and Q is the reaction quotient.First, write the balanced half-reactions:Fe(s) → Fe2+(aq) + 2 e-Pd2+(aq) + 2 e- → Pd(s)The overall reaction is the sum of the half-reactions:Fe(s) + Pd2+(aq) → Fe2+(aq) + Pd(s)The standard cell potential is:E°cell = E°(cathode) - E°(anode) = +0.95 V - (-0.45 V) = +1.40 VThe reaction quotient Q can be calculated using the concentrations of the species involved:Q = [Fe2+] / [Pd2+]^2Substitute the values given:Q = (0.100 M) / (1.0×10^-5 M)^2 = 1.0×10^7Substitute all the values into the Nernst equation:Ecell = +1.40 V - (8.314 J/mol·K / (2 × 96,485 C/mol)) × ln(1.0×10^7)Ecell = +1.16 VOption A.
Learn more about calculated here:
brainly.com/question/21601855
#SPJ11
a solution is made by mixing 7.25 g CaCl2 with enough water to make 150 mL of solution. what is the molarity
A solution is made by mixing 7.25 g CaCl[tex]_2[/tex] with enough water to make 150 mL of solution. 0.433M is the molarity.
The amount of a material in a solution expressed as a proportion of its volume is referred to as "molar concentration" in chemistry. Molarity, amount concentration, and substance concentration are other terms that can be used to describe it. The most common unit used in chemistry to express molarity is the number of moles per litre, which is represented by the unit signs mol/L and mol/dm³ in SI units. One mol/L is the definition of one molar, and 1 M, of a solution's concentration.
Molarity is calculated as follows: moles per litre of solution
number of moles = 7.25/ 110.98
= 0.065
150 mL/1000= 0.15L
Molarity = 0.065 /0.15
=0.433M
To know more about molarity, here:
brainly.com/question/31545539
#SPJ1
Read more on Brainly.com - https://brainly.com/question/32360461#readmore
Calculate the mass of 3.62 x10^24 molecules of glucose
To calculate mass of 3.62 x [tex]10^{24}[/tex] molecules of glucose, we first need to determine molar mass of glucose. Glucose has chemical formula C6H12O6, Mass of 3.62 x [tex]10^{24}[/tex] molecules of glucose is approximately 108.61 g.
The atomic masses of carbon, hydrogen, and oxygen are 12.01 g/mol, 1.01 g/mol, and 16.00 g/mol, respectively. Therefore, the molar mass of glucose can be calculated as follows:
Molar mass of glucose = (6 x atomic mass of carbon) + (12 x atomic mass of hydrogen) + (6 x atomic mass of oxygen)
= (6 x 12.01 g/mol) + (12 x 1.01 g/mol) + (6 x 16.00 g/mol)
= 180.18 g/mol
Therefore, the molar mass of glucose is 180.18 g/mol. This means that one mole of glucose contains 6.022 x [tex]10^{23}[/tex] molecules of glucose and has a mass of 180.18 g.
To calculate the mass of 3.62 x [tex]10^{24}[/tex]molecules of glucose, we can use the following formula: mass = (number of molecules) x (molar mass) / (Avogadro's number) where Avogadro's number is 6.022 x [tex]10^{24}[/tex]molecules/mol.
Substituting the given values into the formula, we get: mass = (3.62 x 10^24 molecules) x (180.18 g/mol) / (6.022 x [tex]10^{24}[/tex] molecules/mol) = 108.61 g Therefore, the mass of 3.62 x [tex]10^{24}[/tex] molecules of glucose is approximately 108.61 g.
Know more about molar mass here:
https://brainly.com/question/22997914
#SPJ11
a highly positive charged protein will bind a cation exchanger and elute off by changing the ph. (True or False)
The given statement "A highly positively charged protein will bind a cation exchanger and elute off by changing the pH" is true because cation exchangers contain negatively charged functional groups that attract positively charged molecules, such as highly positively charged proteins.
By changing the pH, the net charge of the protein can be altered, causing it to become less positively charged and therefore elute off the cation exchanger.
Proteins with a high isoelectric point (pI) will have a higher positive charge at pH values below their pI, allowing them to bind to the negatively charged cation exchanger.
By increasing the pH, the protein's net charge will become more negative, causing it to elute off the column. This process is called ion exchange chromatography and is widely used for protein purification in biochemistry and biotechnology.
For more questions like pH click the link below:
https://brainly.com/question/15289741
#SPJ11
calculate the fraction condensed and the degree of polymerization at t = 5.00 h of a polymer formed by a stepwise process with kr = 1.39 dm3 and an initial monomer concentration of 10.0 mmol dm−3
Fraction condensed = 0.990 and degree of polymerization = 98.2 at t=5.00h for a polymer formed by a stepwise process with kr = 1.39 dm3 and an initial monomer concentration of 10.0 mmol dm−3.
The fraction condensed represents the fraction of the monomer that has reacted to form the polymer at a given time. It is given by the equation:
fraction condensed = 1 - exp(-kr * [M] * t)
where kr is the rate constant, [M] is the initial monomer concentration, and t is the reaction time.
Plugging in the values given in the problem, we get:
fraction condensed = 1 - exp(-1.39 * 10.0 * 5.00) = 0.990
The degree of polymerization represents the average number of monomer units that are linked together in the polymer chain. It is given by the equation:
degree of polymerization = (fraction condensed / (1 - fraction condensed)) * (1 / [M])
Plugging in the values given in the problem and the fraction condensed calculated above, we get:
degree of polymerization = (0.990 / (1 - 0.990)) * (1 / 10.0) = 98.2
Learn more about polymerization here:
https://brainly.com/question/27354910
#SPJ11
which of the following solutions would have the highest osmotic pressure?
a) 0.45 m c6h12o6
b) 0.15 m cabr2
c) 0.25 m libr
d) 0.25 m nh3
e) 0.20 m li2so4
The solution with the highest osmotic pressure would be:
a) 0.45 M C6H12O6 (glucose)
How does the concentration affect osmotic pressure?Osmotic pressure is a colligative property that depends on the concentration of solute particles in a solution. The greater the concentration of solute particles, the higher the osmotic pressure. Osmotic pressure arises due to the tendency of solvent molecules to move from an area of lower solute concentration to an area of higher solute concentration through a semipermeable membrane.
Among the given options, glucose (C6H12O6) is a non-ionic solute that dissociates into individual particles in solution. The solution with the highest concentration of glucose (0.45 M) would have the highest osmotic pressure because it contains more solute particles per unit volume.
Osmotic pressure is an important factor in biological systems, industrial processes, and various scientific applications. Understanding osmotic pressure helps in comprehending osmosis, biological fluid balance, and the behavior of solutions in different environments.
Learn more about Osmotic pressure
brainly.com/question/29819107
#SPJ11
A particular gas exerts a pressure of 3.38 bar. What is this pressure in units of atmospheres? (1 atm = 760 mm Hg = 101.3 kPa = 1.013 bar)Select one:a. 3.42 atmb. 2.54 × 103 atmc. 3.38 atmd. 2.6 × 103 atme. 3.33 atm
This pressure in units of atmospheres is 3.33. The answer is e.
The pressure of a gas can be expressed in different units such as atmospheres, millimeters of mercury, kilopascals, and bars.
To convert the pressure from one unit to another, we need to use conversion factors.
In this problem, we are given the pressure of a gas in bar and we are asked to convert it to atmospheres. The conversion factor between bar and atm is 1 atm = 1.013 bar.
So, to convert from bar to atm, we need to divide the pressure in bar by 1.013.
Therefore, the pressure of the gas in units of atmospheres is:
3.38 bar ÷ 1.013 = 3.33 atm (rounded to two significant figures)
The correct answer is (e) 3.33 atm.
To know more about pressure, refer here:
https://brainly.com/question/28793525#
#SPJ11
CH4(g)+H2O(g)+heat→CO(g)+3H2(g)
The reaction shown above occurs in a sealed container. Which of the following actions would shift the equilibrium of the system above to the right?
A) Add H2O(g) to the system
B) Add H2(g) to the system
C) Add a catalyst to the system
D) Decrease the volume of the system
The action that would shift the equilibrium of the system to the right is; Adding H₂O(g) to the system or decreasing the volume of the system. Option A and D is correct.
The reaction shown is an example of a synthesis reaction, in which two or more reactants combine to form a single product. According to Le Chatelier's principle, if system at equilibrium will be subjected to a change in temperature, pressure, or concentration, of the system will shift to counteract the change and reestablish equilibrium.
Adding H₂O(g) to the system; According to Le Chatelier's principle, adding a reactant to a system at equilibrium will shift the equilibrium to the right to consume the added reactant. In this case, adding H2O(g) would shift the equilibrium to the right and increase the yield of products.
Adding H₂(g) to the system; Adding a product to a system at equilibrium will shift the equilibrium to the left to consume the added product. In this case, adding H₂(g) would shift the equilibrium to the left and decrease the yield of products.
Adding a catalyst to the system; A catalyst increases the rate of a chemical reaction, but it does not affect the position of the equilibrium. Adding a catalyst to the system would not shift the equilibrium to the right or the left.
Decreasing the volume of the system; According to Le Chatelier's principle, decreasing the volume of a system at equilibrium will shift the equilibrium to the side with fewer moles of gas to counteract the change in pressure. In this case, the number of moles of gas decreases from 2 to 4, so decreasing the volume would shift the equilibrium to the right and increase the yield of products.
Hence, A. D. is the correct option.
To know more about Le Chatelier's principle here
https://brainly.com/question/2001993
#SPJ4
Saved A short carbon chain carboxylic acid that is water-soluble will test acidic with pH paper. The paper indicator changes color due to: a. reaction with the carboxylate ion b. the lower hydronium ion concentration c. none of these d. the higher hydronium ion concentration
The correct answer is (d) the higher hydronium ion concentration.
When a water-soluble short carbon chain carboxylic acid dissociates in water, it releases a hydrogen ion, which increases the concentration of hydronium ions in the solution, leading to a decrease in pH. The pH paper indicator changes color in response to the higher hydronium ion concentration, indicating an acidic solution.
The pH paper indicator changes color in the presence of a short carbon chain carboxylic acid that is water-soluble due to d. the higher hydronium ion concentration.
When the carboxylic acid dissolves in water, it ionizes and releases a hydrogen ion (H+) which combines with a water molecule to form a hydronium ion (H3O+). The increase in hydronium ion concentration in the solution leads to a lower pH and causes the pH paper to change color accordingly.
Learn more about hydrogen ion
brainly.com/question/20309096
#SPJ11
a basic solution is 1.35×10−5m in calcium hydroxide, ca(oh)2. what is the ph of the solution at 25.0∘c?
The pH of the basic solution is 9.43 at 25°C.
To solve this problem, we need to use the concept of pH and the equilibrium constant for the dissociation of calcium hydroxide. The dissociation equation is as follows:
Ca(OH)₂(s) ⇌ Ca²⁺(aq) + 2OH⁻(aq)
The equilibrium constant expression for this reaction is:
Kw = [Ca²⁺][OH⁻]²
where Kw is the ion product constant for water, which is 1.0×10⁻¹⁴ at 25°C.
We can use this expression to calculate the concentration of hydroxide ions, [OH⁻], in the solution.
First, we need to find the concentration of Ca²⁺ ions in the solution. Since calcium hydroxide is a strong base, it dissociates completely in water. Therefore, the concentration of Ca²⁺ ions is equal to the concentration of hydroxide ions, which is given by:
[OH⁻] = [tex]\sqrt{[tex]\frac{Kw}{[Ca²⁺] }[/tex]}[/tex] = [tex]\sqrt{(1.0×10⁻¹⁴)/(1.35×10⁻⁵)}[/tex] = 2.72×10⁻⁵ M
Next, we can use the definition of pH to calculate the pH of the solution:
pH = -log[H⁺]
Since this is a basic solution, the concentration of H⁺ ions is very low and can be neglected. Therefore, we can use the concentration of hydroxide ions to calculate the pH:
pH = 14 - pOH = 14 - (-log[OH⁻]) = 14 + log(2.72×10⁻⁵) = 9.43
Therefore, the pH of the solution is 9.43 at 25°C.
To know more about pH, refer here:
https://brainly.com/question/16001508#
#SPJ11
a reactiom that typically occurs spontaneosuly is not happening due to the kinetic energy amongst the reactants being too low. which change would mosy likey lead to this reaction occuring
To make a reaction that typically occurs spontaneously happen despite the low kinetic energy among the reactants, increasing the temperature would be the most likely change to facilitate the reaction.
In many chemical reactions, an increase in temperature leads to an increase in the kinetic energy of the reactant particles. According to the collision theory, higher kinetic energy results in more frequent and energetic collisions between particles, increasing the chances of successful collisions and therefore the likelihood of a reaction occurring. By increasing the temperature, the reactant particles gain kinetic energy, enabling them to overcome the activation energy barrier and proceed with the reaction. The activation energy is the minimum energy required for a reaction to occur. When the kinetic energy of the reactants is low, it may not be sufficient to surpass the activation energy, thus impeding the reaction. However, raising the temperature increases the average kinetic energy of the reactant particles, allowing them to surpass the activation energy and initiate the reaction. Therefore, increasing the temperature is an effective way to enhance the kinetic energy of the reactants and promote the occurrence of a spontaneous reaction.
learn more about collision theory here:
https://brainly.com/question/24110608
#SPJ11
Correlate the microscale procedures needed to accomplish the given steps (1-5) to isolate pure isopentyl acetate (banana oil) from the reaction mixture. (Not all of the steps on the left are required.)
1. This deprotonates unreacted acetic acid, making a water soluble salt.
2 This ensures that the evolution of carbon dioxide gas is complete.
3 This removes byproducts
4 This removes water from the product.
5 This separates the sodiunm sulfate from the ester.
A. Granular anhydrous sodium sulfate is added to the aqueous layer. B. The lower aqueous layer is removed using a Pasteur pipette and discarded. C. The lower aqueous layer is removed using a Pasteur pipette and the organic layer discarded D. The organic layer is dried over granular anhydrous sodium sulfate. E. The dry ester is decanted using a Pasteur pipette to a clean conical vial. F. The sodium sulfate is removed by gravity filtration.
G. The mixture is stirred, capped and gently shaken, with frequent venting H. Aqueous sodium bicarbonate is added to the reaction mixture.
To isolate pure isopentyl acetate from the reaction mixture, the following microscale procedures can be correlated to the given steps: 1. To deprotonate unreacted acetic acid and make a water-soluble salt, aqueous sodium bicarbonate can be added to the reaction mixture.
2. To ensure the evolution of carbon dioxide gas is complete, the mixture can be stirred, capped and gently shaken, with frequent venting.
3. To remove byproducts, the lower aqueous layer can be removed using a Pasteur pipette and discarded.
4. To remove water from the product, granular anhydrous sodium sulfate can be added to the organic layer. The organic layer can then be dried over the sodium sulfate and decanted using a Pasteur pipette to a clean conical vial.
5. To separate the sodium sulfate from the ester, the mixture can be filtered using gravity filtration to remove the sodium sulfate.
the microscale procedures needed to accomplish the given steps to isolate pure isopentyl acetate (banana oil) from the reaction mixture. Here are the correlations:
1. This deprotonates unreacted acetic acid, making a water-soluble salt. - H. Aqueous sodium bicarbonate is added to the reaction mixture.
2. This ensures that the evolution of carbon dioxide gas is complete. - G. The mixture is stirred, capped, and gently shaken, with frequent venting.
3. This removes byproducts. - B. The lower aqueous layer is removed using a Pasteur pipette and discarded.
4. This removes water from the product. - D. The organic layer is dried over granular anhydrous sodium sulfate.
5. This separates the sodium sulfate from the ester. - F. The sodium sulfate is removed by gravity filtration.
To know more about Isopentyl acetate visit:
https://brainly.com/question/29978390
#SPJ11
what is the value of the equilibrium constant k for a reaction for which !:!.go is equal to 5.20 kj·moj-1 at 50 °c?
The equilibrium constant for the reaction is 6.9.
Temperature at which the reaction is held, T = 50°C = 323 K
The Gibb's free energy of the reaction, ΔG₀ = 5.2 kJ/mol
When a thermodynamic system is in thermal equilibrium, or chemical equilibrium, it is said to be in thermodynamic equilibrium. The values of a system's intense parameters, such as pressure, temperature, etc., determines the local state of the system at thermodynamic equilibrium.
The expression for the Gibb's free energy is given by,
ΔG₀ = -RT lnK
lnK = -ΔG₀/RT
lnK = 5.2 x 10³/(8.314 x 323)
lnK = 5.2 x 10³/2685.4
lnK = 1.93
Therefore, the equilibrium constant of the reaction,
K = e⁻(1.93)
K = 6.9
To learn more about equilibrium constant, click:
https://brainly.com/question/29694148
#SPJ1
what is the percent yield when 1.72 g of h2o2 decomposes and produces 375 ml of o2 gas measured at 42 oc and 1.52 atm? the molar mass of h2o2 is 34.02 g∙mol–1. 2h2o2(aq)2h2o(l) o2(g)
The percent yield of the reaction is 59.9%. When 1.72 g of H₂O₂ decomposes and produces 375 ml of O₂ gas measured at 42 oc and 1.52 atm
To calculate the percent yield of the reaction, we need to first determine the theoretical yield of oxygen gas that should have been produced based on the amount of hydrogen peroxide that decomposed.
From the balanced chemical equation, we can see that 2 moles of hydrogen peroxide (HO₂) produces 1 mole of oxygen gas (O₂).
2 H₂O₂ (aq) → 2 H₂O(l) + O₂(g)
First, we need to calculate the moles of hydrogen peroxide that decomposed;
1.72 g / 34.02 g/mol = 0.0505 mol H₂O₂
Since 2 moles of H₂O₂ produces 1 mole of O₂, we can calculate the theoretical yield of O2;
0.0505 mol H₂O₂ × (1 mol O₂ / 2 mol H₂O₂ )
= 0.0253 mol O₂
Next, we need to calculate the actual yield of O₂. We are given that 375 mL of O₂ gas was produced at 42 °C and 1.52 atm. We use the ideal gas law to calculate the number of moles of O₂;
PV = nRT
where P is pressure, V is volume, n is the number of moles, R is ideal gas constant (0.08206 L atm/mol K), and T is the temperature in Kelvin.
First, we convert the volume to liters and the pressure to atmospheres;
375 mL × (1 L / 1000 mL) = 0.375 L
1.52 atm
Next, we convert the temperature to Kelvin;
42 °C + 273 = 315 K
Now we can plug in the values and solve for the number of moles of O₂;
n = (1.52 atm)(0.375 L) / (0.08206 L atm/mol K)(315 K) = 0.0152 mol O₂
Finally, we can calculate the percent yield;
Percent yield = (actual yield/theoretical yield) × 100%
Percent yield = (0.0152 mol / 0.0253 mol) × 100%
= 59.9%
Therefore, the percent yield of the reaction will be 59.9%.
To know more about percent yield here
https://brainly.com/question/2506978
#SPJ4
Look at the image of the dodder plant wrapping around another plant. How would you describe parasitism?
Parasitism is a type of symbiotic relationship between two organisms, where one organism (parasite) benefits at the expense of the other organism (host).
In the context of the image you mentioned, the dodder plant wrapping around another plant, we can observe an example of parasitism. The dodder plant is a parasitic plant that lacks the ability to produce its own food through photosynthesis. Instead, it attaches itself to other plants, like the one shown in the image, and extracts nutrients and water from the host plant.
The dodder plant forms specialized structures called haustoria, which penetrate the host plant's tissues to access its vascular system. In this parasitic relationship, the host plant is harmed as it experiences reduced access to essential resources, stunted growth, and weakened overall health. Meanwhile, the dodder plant benefits by obtaining the necessary nutrients and water from the host, enabling its own growth and survival.
Overall, parasitism is characterized by a one-sided relationship in which the parasite benefits while the host is negatively impacted. It is an example of exploitation and a form of symbiosis that demonstrates the diverse strategies organisms employ to survive and thrive.
Learn more about Parasitism here
https://brainly.com/question/30669005
#SPJ11
waht are reactions with negetie reation free enegies occur spontaneoulst and repidly false
Reactions with negative reaction free energies occur spontaneously and rapidly, the given statement is false because it is essential to understand that spontaneity and reaction rate are two different aspects of a chemical reaction.
A reaction with negative reaction free energy (also known as Gibbs free energy) indicates that the reaction is spontaneous, the Gibbs free energy (ΔG) is a thermodynamic quantity that helps predict whether a reaction will occur spontaneously. If ΔG is negative, the reaction is thermodynamically favored and occurs spontaneously. However, this does not necessarily mean that the reaction will happen rapidly. The reaction rate depends on the activation energy (Ea), which is the minimum energy required to initiate a chemical reaction.
A reaction with high activation energy will proceed slowly because it needs a higher input of energy to overcome the energy barrier, even if the reaction is spontaneous. Therefore, it the given statements is false, to assume that reactions with negative reaction free energies always occur rapidly. While negative reaction free energies indicate spontaneity, the reaction rate is determined by factors such as activation energy, temperature, and concentration of reactants.
To learn more about Gibbs free energy here:
https://brainly.com/question/9179942
#SPJ11
What type of compound and bond is hydrolyzed by the following? a.alpha-amylase b.lipase
Alpha-amylase hydrolyzes alpha-1,4-glycosidic bonds in polysaccharides(starch and glycogen), while lipase hydrolyzes ester bonds in triglycerides (fats and oils).
Alpha-amylase is an enzyme that hydrolyzes the alpha-1,4-glycosidic bonds found in starch and glycogen. Starch and glycogen are polysaccharides made up of glucose units connected through alpha-1,4-glycosidic linkages. Alpha-amylase breaks these bonds, resulting in smaller polysaccharides or maltose units.
Lipase, on the other hand, is an enzyme that hydrolyzes ester bonds present in triglycerides (fats and oils). Triglycerides are composed of a glycerol molecule attached to three fatty acid chains through ester linkages. Lipase cleaves these ester bonds, releasing glycerol and free fatty acids.
Overall, both alpha-amylase and lipase play important roles in the breakdown and utilization of nutrients in the body, and are essential for maintaining overall health and well-being.
To learn more about Alpha-amylase visit:
https://brainly.com/question/30133117
#SPJ11
An unknown substance has a mass of 21.7 g. The temperature of the substance increases from 27.3 °C to 44.1 C when 85.7 J of heat is added to the substance. What is the most likely identity of the substance? The table lists the specific heats of select substances Substance Specific Heat (Jlgc) O copper O silver O aluminum O iron O water O lead 0.128 lead iwer 0.235 copper iron aluminum 0.903 0.385 0.449 water4.184
The most likely identity of the unknown substance is silver.
To identify the substance, we need to determine its specific heat capacity using the provided information:
The formula to calculate specific heat capacity (c) is:
q = mcΔT
where q is the heat added (85.7 J), m is the mass (21.7 g), and ΔT is the change in temperature (44.1 °C - 27.3 °C = 16.8 °C).
Rearranging the formula for c:
c = q / (mΔT)
Plugging in the given values:
c = 85.7 J / (21.7 g × 16.8 °C) ≈ 0.231 J/g°C
Now, comparing the calculated specific heat capacity with the given substances:
- Copper: 0.385 J/g°C
- Silver: 0.235 J/g°C
- Aluminum: 0.903 J/g°C
- Iron: 0.449 J/g°C
- Water: 4.184 J/g°C
- Lead: 0.128 J/g°C
The substance with the closest specific heat capacity to our calculated value (0.231 J/g°C) is silver, with a specific heat of 0.235 J/g°C. Therefore, the most likely identity of the unknown substance is silver.
To learn more about silver, refer below:
https://brainly.com/question/6434391
#SPJ11
The standard reduction potentials are as follows:
MnO4- + 8H+ + 5e- -> Mn2+ + 4H2O E° = 1.51 V
Cr2O72- +14H+ + 6e- -> 2 Cr3+ +7H2O E° = 1.33 V
which species is oxidized?
Neither MnO₄⁻ nor Cr₂O7₂⁻, in their respective equations that have reduction potentials as 1.51V and 1.33V respectively, are being oxidized.
In order to determine which species is being oxidized, we must first understand the concept of reduction potentials.
Reduction potential is a measure of the tendency of a species to gain electrons and undergo reduction. The higher the reduction potential of a species, the more likely it is to gain electrons and undergo reduction. Conversely, the lower the reduction potential of a species, the more likely it is to lose electrons and undergo oxidation.
In the given equations, both MnO₄⁻ and Cr₂O7₂⁻ are undergoing reduction, meaning they are gaining electrons. The MnO₄⁻ is gaining 5 electrons and being reduced to Mn²⁺ with a reduction potential of 1.51 V. The Cr₂O7₂⁻ is gaining 6 electrons and being reduced to 2 Cr³⁺ with a reduction potential of 1.33 V. Therefore, neither MnO₄⁻ nor Cr₂O7₂⁻ is being oxidized.
In fact, the species being oxidized are not even present in the given equations. In order for a redox reaction to occur, there must be both a species that is undergoing reduction (gaining electrons) and a species that is undergoing oxidation (losing electrons).
However, in this case, only the reduction half-reactions are given. The oxidation half-reactions, which involve the species losing electrons, are not given.
Therefore, based on the given equations, the species being oxidized cannot be determined. We can only determine which species are undergoing reduction and the associated reduction potentials.
To know more about Reduction potential, refer here:
https://brainly.com/question/23881200#
#SPJ11