Answer:
the answer is A because it has the least number but high in energy
A tiny spring, with a spring constant of 1.20 N/m, will be stretched to what displacement by a 0.0050-N force?
a)7.2 mm
b)9.4 mm
c)4.2 mm
d)6.0 mm
The displacement by 0.0050-N force is 4.2 mm.
Hooke's law states that the force required to stretch or compress a spring is directly proportional to the displacement of the spring from its equilibrium position. The proportionality constant is called the spring constant and is denoted by k. Mathematically, Hooke's law can be expressed as F = -kx, where F is the force applied to the spring, x is the displacement of the spring from its equilibrium position, and the negative sign indicates that the force exerted by the spring is in the opposite direction to the displacement.
Rearrange the formula to solve for x:
x = F / k
Substitute the values:
x = 0.0050 N / 1.20 N/m
x = 0.0041667 m
Convert meters to millimeters:
x = 0.0041667 m * 1000 = 4.1667 mm
Rounded to one decimal place,
The correct answer is c) 4.2 mm.
To know more about the displacement, click here;
https://brainly.com/question/30087445
#SPJ11
A current-carrying loop of wire is placed in a uniform b-field as shown. If the direction of the current of the loop is as indicated, what will the loop do?.
A current-carrying loop of wire is placed in a uniform b-field as shown. If the direction of the current of the loop is as indicated, the loop it will experience a torque that causes it to rotate.
When a current-carrying loop is placed in a uniform magnetic field, it will experience a torque that causes it to rotate. The direction of the rotation can be determined using the right-hand rule: if you point your right thumb in the direction of the current and your fingers in the direction of the magnetic field, the direction of rotation will be perpendicular to both the thumb and fingers.
To explain further, the torque on a current-carrying loop in a magnetic field is given by τ = NIABsinθ, where N is the number of turns in the loop, I is the current, A is the area of the loop, B is the magnetic field strength, and θ is the angle between the plane of the loop and the direction of the magnetic field. The amount of rotation will depend on the strength of the magnetic field and the current in the loop, as well as the shape and size of the loop itself. However, the direction of rotation will always be the same, given by the right-hand rule. So therefore if the loop is placed as shown and the current flows in the direction indicated, the torque will cause the loop to rotate clockwise.
To know more about magnetic field here
https://brainly.com/question/31323435
#SPJ11
The deer stops at a lake for a drink of water and then starts hopping again to the south. Each second the deer velocity increases 2. 5m/s what is the deer velocity after 5s
The deer's velocity after 5 seconds of hopping to the south will be 12.5 m/s. The initial velocity of the deer is not provided in the question, so we assume it to be zero.
Since the deer's velocity increases by 2.5 m/s each second, after 1 second, the velocity will be 2.5 m/s, after 2 seconds it will be 5 m/s, and so on. We can calculate the deer's velocity after 5 seconds by multiplying the rate of increase (2.5 m/s) by the time (5 seconds). Hence, the deer's velocity after 5 seconds will be [tex]\(2.5 \times 5 = 12.5\)[/tex] m/s.
In this case, we use the formula for uniformly accelerated motion: [tex]\(v = u + at\)[/tex], where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time. As the deer's initial velocity is assumed to be zero, the equation simplifies to v = at. Plugging in the given values of acceleration [tex](2.5 m/s\(^2\))[/tex] and time (5 seconds), we get [tex]\(v = 2.5 \times 5 = 12.5\) m/s[/tex]. Therefore, the deer's velocity after 5 seconds is 12.5 m/s.
To learn more about velocity refer:
https://brainly.com/question/29110645
#SPJ11
show that eq can be written as y(x,y) = Acos[2pi/lamda(x-vt)Use y(x,t) to find an expression for the transverse velocity ev of a particle in the string on which the wave travels. (c) Find the maximum speed of a particle of the string. Under what circumstances is this equal to the propagation speed v?
The equation in transverse velocity is v = -1/v * (∂y/∂t) / [2π/λ * sin[2π/λ * (x - vt)]], C-The maximum speed of a particle in the string is given by v_max = -A/v, and it is equal to the propagation speed (v) when the amplitude (A) of the wave is equal to the velocity (v) of the wave.
The equation for transverse displacement as:
y(x, t) = A * cos[2π/λ * (x - vt)]
To find the transverse velocity, we differentiate the transverse displacement equation with respect to time (t) while treating x as a constant:
∂y/∂t = A * (-2πv/λ) * sin[2π/λ * (x - vt)]
The transverse velocity (v) is the rate of change of transverse displacement with respect to time. Therefore, the transverse velocity (v) can be written as:
v = ∂y/∂t / (-2πv/λ * sin[2π/λ * (x - vt)])
To simplify this expression, we can rearrange it as follows:
v = (-λ/2πv) * ∂y/∂t * 1/sin[2π/λ * (x - vt)]
Multiplying the numerator and denominator of the right side by (2π/λ), we get:
v = (-λ/2πv) * (2π/λ) * ∂y/∂t * 1/[2π/λ * sin[2π/λ * (x - vt)]]
Simplifying further, we have:
v = -1/v * (∂y/∂t) / [2π/λ * sin[2π/λ * (x - vt)]]
C-The maximum speed of a particle on the string occurs when the sine term is equal to 1, which happens when:
2π/λ * (x - vt) = 0 or 2π
If we consider the situation when (x - vt) = 0, which means the particle is at a fixed position, the maximum speed occurs when the derivative of transverse displacement with respect to time is at its maximum. In other words:
∂y/∂t = A * (2πv/λ) * sin[2π/λ * (x - vt)] = A * (2πv/λ)
The maximum speed (v_max) is then given by:
v_max = -1/v * (A * (2πv/λ)) / [2π/λ * 1] = -A/v
Therefore, the maximum speed of a particle on the string is given by v_max = -A/v.
The maximum speed is equal to the propagation speed (v) when A/v = 1, which happens when the amplitude (A) of the wave is equal to the velocity (v) of the wave.
Learn more about velocity here:
https://brainly.com/question/19979064
#SPJ11
how to find the depth of an object floating given the dnsity of the liquid and the density of the fluid
Identify the object's density. Continue to the next step if you know the object's density. If not, you might need to compute it using the object's mass and volume.
Find out the fluid's density. It is important to understand the fluid's density in which the object is floating. Verify the densities. An object will float if its density is lower than that of the fluid. In the case of equal densities, the object will float in a neutral manner.
According to Archimedes' principle, an object's buoyant force is equal to the weight of the fluid it is dislodging. Apply this idea to determine the buoyant force.
To know more about object's density, here
brainly.com/question/6838128
#SPJ4
a plane electromagnetic wave is generated due to the initiation of current along the x direction in a current sheet in the zx plane at y=0. a steady flow current is switched on at t=0
An electromagnetic wave is generated by the initiation of current in a current sheet along the x direction in the zx plane at y=0. At t=0, a steady flow current is switched on.
How is an electromagnetic wave generated in a current sheet with a steady flow current switched on at t=0?When a current is initiated in a current sheet along the x direction in the zx plane at y=0, it generates an electromagnetic wave. This wave propagates in space and is characterized by an electric field and a magnetic field that are perpendicular to each other and also perpendicular to the direction of propagation.
At t=0, a steady flow current is switched on, which adds to the existing current in the current sheet. This causes a perturbation in the current, which in turn leads to the emission of radiation in the form of electromagnetic waves.
The electromagnetic wave generated by the current sheet can be described mathematically using Maxwell's equations. These equations relate the electric and magnetic fields to the sources that generate them, such as charges and currents. In the case of the current sheet, the current is the source of the electromagnetic waves.
The propagation of electromagnetic waves has many practical applications, such as in wireless communication, radar, and satellite communication. Understanding the physics of electromagnetic waves is crucial in the design and optimization of these systems.
Learn more about Electromagnetic wave
brainly.com/question/29774932
#SPJ11
Electrons are accelerated through a potential difference of 750 kV, so that their kinetic energy is 7.50 x 105 eV.
A) What is the ratio of the speed v of an electron having this energy to the speed of light, c?
b) What would the speed be if it were computed from the principles of classical mechanics?
1.31 x 10^20 m/s^2 is the ratio of the speed v of an electron having this energy to the speed of light, c and 1.13 x 10^8 m/s would the speed be if it were computed from the principles of classical mechanics.
To determine the ratio of the speed v of an electron with kinetic energy of 7.50 x 105 eV to the speed of light, c, we can use the equation E = 1/2mv^2, where E is the kinetic energy of the electron, m is the mass of the electron, and v is its velocity.
Rearranging this equation, we get v = sqrt(2E/m).
Substituting the values, we get v = sqrt((2 * 7.50 x 10^5 eV) / (9.11 x 10^-31 kg)), which is approximately 1.63 x 10^8 m/s.
The speed of light is 2.99 x 10^8 m/s.
Therefore, the ratio of the electron's speed to the speed of light is 1.63 x 10^8 m/s ÷ 2.99 x 10^8 m/s = 0.544.
To compute the speed of the electron using classical mechanics,
we can use the equation F = ma, where F is the force acting on the electron,
m is its mass, and
a is its acceleration.
The force on the electron is given by F = eE, where e is the charge on the electron and E is the electric field.
Thus, the acceleration of the electron is a = eE/m.
Substituting the values, we get
a = (1.6 x 10^-19 C) (750 x 10^3 V/m) / (9.11 x 10^-31 kg)
= 1.31 x 10^20 m/s^2.
Using the equation v = at, where t is the time taken for the electron to traverse the potential difference,
we get
v = a(sqrt(2qV/m))/a
= sqrt(2qV/m)
= sqrt((2 x 1.6 x 10^-19 C x 750 x 10^3 V)/(9.11 x 10^-31 kg)),
which is approximately 1.13 x 10^8 m/s.
To know more about Kinetic energy visit:
https://brainly.com/question/26472013
#SPJ11
If 2200 J of heat are added to a 190 - g object, its temperature increases by 12 ∘C .
A) What is the heat capacity of this object?
B) What is the object's specific heat?
A) The object's heat capacity is 0.18 kJ/°C.
B) The specific heat of the item is 0.96 kJ/kgK.
A) The following formula may be used to calculate heat capacity:
Heat Energy / Temperature Change = Heat Capacity
Given: 2200 J of heat energy
Change in temperature = 12 °C
2200 J / 12 °C = 183.33 J/°C Heat Capacity
Converting from degrees Celsius to kilojoules:
Heat Capacity = 183.33 J/°C multiplied by (1 kJ/1000 J) = 0.18333 kJ/°C
As a result, the object's heat capacity is roughly 0.18 kJ/°C.
B) The formula for specific heat is as follows: Specific Heat = Heat Capacity / Mass
Weight = 190 g = 0.19 kilogramme
Specific Heat = 0.947 kJ/kgK = 0.18 kJ/°C / 0.19 kg
As a result, the specific heat of the item is roughly 0.96 kJ/kgK.
For more such questions on heat capacity , click on:
https://brainly.com/question/31963763
#SPJ11
The car has an initial speed v0 = 20 m/s. It increases its speed along the circular track at s = 0, at=(0. 6s)m/s2 , where s is in meters
The car's initial speed is 20 m/s, and its speed increases at a rate of 0.6s m/s² along the circular track.
The car's initial speed, v0, is given as 20 m/s. Along the circular track, its speed increases with time, denoted as s. The rate of this increase is given as at = 0.6s m/s², where s represents the distance traveled on the track in meters. As time passes, the speed of the car progressively accelerates according to the equation. For example, if s = 5 meters, the rate of speed increase would be 0.6 * 5 = 3 m/s². This equation describes the relationship between the distance traveled and the corresponding acceleration, determining how the car's speed evolves along the circular track.
learn more about speed here:
https://brainly.com/question/13262927
#SPJ11
Identify the Bernoulli’s Principle mathematical expression: a) = mc 2 b) p + 1 2 2 + ℎ = co c) none of the previous
The correct formula is given in option (b). Remember to use the Bernoulli's Principle formula (option b) for fluid dynamics problems to calculate changes in pressure, velocity, or height along a fluid's streamline.
( b) p + 1/2ρv^2 + ρgh = constant. This expression is known as Bernoulli's Principle, which states that an increase in the speed of a fluid will result in a decrease in pressure. This principle is often used in fluid mechanics and aerodynamics to explain phenomena such as lift in airplanes and the flow of fluids through pipes.
To explain the expression, p represents the pressure of the fluid, ρ represents its density, v is the velocity of the fluid, g is the acceleration due to gravity, and h represents the height of the fluid above a reference point. The constant on the right-hand side of the equation represents the total energy of the fluid, which remains constant along any given streamline.
Option a) = mc^2 is Einstein's famous equation for mass-energy equivalence and is not related to Bernoulli's Principle. Option c) states that there is no previous option that represents Bernoulli's Principle, which is incorrect. Therefore, option b) is the correct answer.
To know more about Bernoulli's Principle referr to
https://brainly.com/question/13098748
#SPJ11
a small rocket burns a mass 0.0550 kg of fuel per second, ejecting it as a gas with a velocity relative to the rocket of magnitude 1650 m/s.
A.) What is the thrust of the rocket? (Answer: 889 N)
B.) What is the rockets change in velocity after it has burned 355kg , of fuel if its total initial mass is 1830kg ?
C.) What is the rockets velocity after 171 s, if it had an initial velocity of 1028 m/s ?
A) The thrust of the rocket is 889 N.
B) The rocket's change in velocity after burning 355 kg of fuel is 192.5 m/s.
C) The rocket's velocity after 171 s is 1239.7 m/s.
A) Thrust = mass flow rate * exhaust velocity = 0.0550 kg/s * 1650 m/s = 889 N
B) Use Tsiolkovsky rocket equation: Δv = ve * ln(m0 / m1), where Δv is change in velocity, ve is exhaust velocity, m0 is initial mass, and m1 is final mass. Δv = 1650 m/s * ln((1830 kg) / (1830 kg - 355 kg)) = 192.5 m/s
C) Calculate mass after 171 s: m = 1830 kg - (0.0550 kg/s * 171 s) = 1625.45 kg. Apply Tsiolkovsky rocket equation: Δv = 1650 m/s * ln((1830 kg) / (1625.45 kg)) = 211.7 m/s. Final velocity = initial velocity + change in velocity = 1028 m/s + 211.7 m/s = 1239.7 m/s.
To know more about exhaust velocity click on below link:
https://brainly.com/question/31322519#
#SPJ11
extends by when a force of 50N was used to stretch it from it's end.
To calculate the stress and strain on the wire, we can use the following formulas:
a) Stress (σ) = Force (F) / Area (A)
b) Strain (ε) = Change in length (ΔL) / Original length (L)
Given information:
Length of the wire (L) = 5 m
Diameter of the wire (d) = 2 mm = 0.002 m
Change in length (ΔL) = 0.25 mm = 0.00025 m
Force (F) = 50 N
First, let's calculate the cross-sectional area of the wire using the diameter:
Area (A) = π * (d/2)^2
A = π * (0.002/2)^2
A ≈ 3.142 * (0.001)^2
A ≈ 3.142 * 0.000001
A ≈ 0.000003142 m^2
Now, we can calculate the stress and strain:
a) Stress (σ) = F / A
σ = 50 / 0.000003142
σ ≈ 15,930,285.25 Pa
b) Strain (ε) = ΔL / L
ε = 0.00025 / 5
ε = 0.00005
So, the answers are:
a) Stress on the wire ≈ 15,930,285.25 Pa
b) Strain on the wire = 0.00005
Please note that the stress is in pascals (Pa) and the strain is a unitless quantity.
Kindly Heart and 5 Star this answer and especially don't forgot to BRAINLIEST, thanks!The coefficient of expansion of a certain type of steel is 0.000012 per C°. The coefficient of volume expansion is:
The coefficient of expansion of a steel is 0.000012 per C°. The coefficient of volume expansion (β) can be calculated by multiplying the linear expansion coefficient by three.
β is a measure of how much the volume of a material changes with temperature. It is related to the coefficient of linear expansion (α) by the equation β = 3α.
For the given type of steel, α = 0.000012 per C°. Therefore, β = 3α = 0.000036 per C°. This means that for every 1°C increase in temperature, the volume of this steel will increase by 0.000036 times its original volume.
It's worth noting that the coefficient of volume expansion may not be constant over a wide temperature range. In fact, for some materials, the coefficient may change significantly with temperature. Therefore, it's important to consider the temperature range of interest when selecting a material for a particular application, and to take into account any changes in volume that may occur due to temperature fluctuations.
To know more about the coefficient of expansion refer here :
https://brainly.com/question/14780533#
#SPJ11
the number of lines that connect opposite corners of a cube through its center is:
There are 4 lines that connect opposite corners of a cube through its center.
To find the number of lines that connect opposite corners of a cube through its center, we need to visualize the cube and draw a line connecting two opposite corners that pass through the center of the cube.
We can see that there are two diagonals passing through the center of the cube. Each diagonal connects two opposite corners of the cube. Therefore, the total number of lines that connect opposite corners of the cube through its center is equal to the number of diagonals, which is 4.
In summary, the number of lines that connect opposite corners of a cube through its center is 4.
To know more about center, visit;
https://brainly.com/question/28021242
#SPJ11
A wave traveling on a Slinky® that is stretched to 4 m takes 2.4 s to travel the length of the Slinky and back again. (a) What is the speed of the wave? (b) Using the same Slinky stretched to the same length, a standing wave is created which consists of three antinodes and four nodes. At what frequency must the Slinky be oscillating?
Therefore, the frequency of the standing wave in the Slinky stretched to 4m, consisting of three antinodes and four nodes, is 2.5 Hz.
(a) The speed of the wave can be calculated using the formula v = 2d/t, where v is the velocity of the wave, d is the distance traveled by the wave, and t is the time taken by the wave to travel the distance. In this case, the distance traveled by the wave is twice the length of the Slinky, which is 4m x 2 = 8m. The time taken by the wave to travel this distance is 2.4s. So, the velocity of the wave is v = 2 x 8/2.4 = 6.67 m/s.
(b) The frequency of the standing wave can be calculated using the formula f = nv/2L, where f is the frequency of the wave, n is the number of antinodes, v is the velocity of the wave, and L is the length of the Slinky. In this case, the Slinky is stretched to 4m, so the length of the Slinky is L = 4m. The velocity of the wave is calculated in part (a) as 6.67 m/s. The standing wave has three antinodes, so n = 3. Substituting these values in the formula gives f = 3 x 6.67/2 x 4 = 2.5 Hz.
For more such question on frequency
https://brainly.com/question/29944043
#SPJ11
(a) The speed of the wave on the stretched Slinky is approximately 1.67 m/s and (b) The Slinky oscillates at approximately 1.67 Hz to create a standing wave with three antinodes and four nodes.
(a) To determine the speed of the wave, we can use the formula:
speed = distance / time.
Given:
Distance traveled by the wave = 4 m (length of the Slinky)
Time taken = 2.4 s (to travel the length of the Slinky and back again)
Substituting the values into the formula:
speed = 4 m / 2.4 s.
Calculating this expression, we find:
speed ≈ 1.67 m/s (rounded to two decimal places).
Therefore, the speed of the wave traveling on the stretched Slinky is approximately 1.67 m/s.
(b) A standing wave on a Slinky is created by the interference of two waves traveling in opposite directions. The nodes are the points of zero displacement, while the antinodes are the points of maximum displacement.
In a standing wave with three antinodes and four nodes, we can determine the wavelength (λ) and then calculate the frequency (f) using the wave equation:
v = f * λ,
where v is the speed of the wave.
Given:
Speed of the wave (v) = 1.67 m/s (as calculated in part a)
Number of antinodes = 3
Number of nodes = 4
To find the wavelength, we can count the number of segments between consecutive nodes or antinodes. In this case, there are four segments between consecutive nodes or antinodes.
The wavelength (λ) can be calculated by dividing the total length of the Slinky by the number of segments:
λ = 4 m / 4 segments = 1 m.
Now, we can use the wave equation to calculate the frequency:
1.67 m/s = f * 1 m.
Solving for the frequency (f):
f = 1.67 m/s / 1 m.
Calculating this expression, we find:
f ≈ 1.67 Hz (rounded to two decimal places).
Therefore, the Slinky must be oscillating at approximately 1.67 Hz to create a standing wave with three antinodes and four nodes.
To learn more about the speed of the wave from the given link
https://brainly.com/question/29798763
#SPJ4
a 3.00 m organ pipe is open at both ends and contains air. the speed of sound in air is 331 m/s. what is the frequency of the lowest frequency mode?
The frequency of the lowest frequency mode in a 3.00 m organ pipe that is open at both ends is 55.2 Hz.
The lowest frequency mode of a 3.00 m organ pipe open at both ends can be determined using the formula for fundamental frequency (f) of a tube open at both ends:
f = v / (2 * L)
where:
f = fundamental frequency (Hz)
v = speed of sound in air (331 m/s)
L = length of the pipe (3.00 m)
Using the given values, we can calculate the frequency:
f = 331 m/s / (2 * 3.00 m)
f = 331 m/s / 6.00 m
f = 55.17 Hz
Therefore, the frequency of the lowest frequency mode for a 3.00 m organ pipe open at both ends is approximately 55.17 Hz.
Learn more about frequency here:-
https://brainly.com/question/30783512
#SPJ11
A string with both ends held fixed is vibrating in its third harmonic. The waves have a speed of 192 m/s and a frequency of 210 Hz . The amplitude of the standing wave at an antinode is 0.400 cm .
Part A
Calculate the amplitude at point on the string a distance of 25.0 cm from the left-hand end of the string.
Part B
How much time does it take the string to go from its largest upward displacement to its largest downward displacement at this point?
Part C
Calculate the maximum transverse velocity of the string at this point.
Part D
Calculate the maximum transverse acceleration of the string at this point
Part A:
The amplitude at a specific point on a vibrating string depends on its position within the standing wave pattern. In the third harmonic, there are three antinodes and two nodes between the fixed ends. As the distance from the left-hand end is 25.0 cm, this point is exactly at the first node, where the string doesn't oscillate. Therefore, the amplitude at this point is 0 cm.
Part B:
The time it takes for the string to go from its largest upward displacement to its largest downward displacement at a specific point is half of its period (T/2). The period can be calculated using the formula T = 1/frequency. With a frequency of 210 Hz, the period is:
T = 1/210 ≈ 0.00476 s
Half the period is 0.00476/2 ≈ 0.00238 s.
Part C:
At the given point, the amplitude is 0, so the maximum transverse velocity will also be 0 m/s.
Part D:
Similarly, the maximum transverse acceleration at this point will also be 0 m/s², as the amplitude is 0 and there is no oscillation.
Learn more about wave here:
https://brainly.com/question/30783512
#SPJ11
Suppose a static charge of 0.22 μC moves from your finger to a metal doorknob in 0.95 ms. What is the current, in amperes?p
We can use the formula for electric charge and current to calculate the current:
I = Q / t
where I is the current, Q is the charge, and t is the time.
In this problem, the charge Q is given as 0.22 μC, and the time t is given as 0.95 ms. However, we need to convert the charge to units of coulombs (C) before we can use the formula:
0.22 μC = 0.22 × 10^-6 C
Substituting the known values into the formula:
I = (0.22 × 10^-6 C) / (0.95 × 10^-3 s) = 0.23 A
Therefore, the current is 0.23 amperes (A).
To know more about refer electric charge here
brainly.com/question/9194793#
#SPJ11
Mass of box is 1.5kg starts with an initial velocity of 3m/s in the direction opposite ot that of the force. It is again acted on by a force of 4N to the right and again ends at a point 3 meters to the right of where is started. What is the work done on the box ? I got this to be 12 Joules . 2) What is the final kinetic energy of the box ?
The final kinetic energy of the box is 12 Joules.
To calculate the work done on the box, we can use the formula:
Work = force x distance x cos(theta)
where theta is the angle between the force and the direction of motion. In this case, the force is 4N to the right and the displacement is also to the right, so theta is 0 degrees and cos(theta) is 1. Therefore:
Work = 4N x 3m x 1
Work = 12 Joules
So, the work done on the box is 12 Joules.
To find the final kinetic energy of the box, we can use the formula:
Kinetic energy = 0.5 x mass x velocity^2
We know that the mass of the box is 1.5kg and the initial velocity is 3m/s in the opposite direction. When the force is applied to the right, the box starts moving to the right and gains speed. We don't know the final velocity, but we can use the fact that the box ends up 3 meters to the right of where it started. If we assume that the force was applied over this entire distance, we can use the work-energy principle:
Work done by force = change in kinetic energy
We already calculated that the work done by the force is 12 Joules. We can assume that this work is used to increase the kinetic energy of the box. So:
12 Joules = final kinetic energy - initial kinetic energy
The initial kinetic energy is 0, since the box starts from rest. Solving for the final kinetic energy:
final kinetic energy = 12 Joules
So, the final kinetic energy of the box is 12 Joules.
Learn more about kinetic energy
brainly.com/question/26472013
#SPJ11
A 95-kg person climbs some stairs at a constant rate, gaining 2.5 meters in height.Randomized Variables: m = 95 kg, h = 2.5 hFind the work done by the person, in joules, to accomplish this task.
The person has done 2327.5 joules of work to accomplish the task of climbing the stairs.
To find the work done by the person, we need to use the formula W = Fd, where W is the work done, F is the force applied, and d is the distance moved in the direction of the force. In this case, the force applied is the weight of the person, which can be calculated using the formula F = mg, where m is the mass of the person and g is the acceleration due to gravity (9.8 m/s^2).
So, the force applied is F = 95 kg x 9.8 m/s^2 = 931 N. The distance moved in the direction of the force is the height gained, which is 2.5 meters. Therefore, the work done by the person is W = Fd = 931 N x 2.5 m = 2327.5 joules.
The work done by the person to climb the stairs is 2327.5 joules. Work is defined as the energy transferred when a force is applied to an object and it moves in the direction of the force. In this case, the force applied is the weight of the person, which is a result of the gravitational attraction between the person and the Earth. As the person climbs the stairs, they do work against the force of gravity to lift their body to a higher elevation. This work is calculated by multiplying the force applied (weight) by the distance moved in the direction of the force (height gained). The unit of work is the joule, which is defined as the amount of work done when a force of one newton is applied over a distance of one meter. In this scenario, the person has done 2327.5 joules of work to accomplish the task of climbing the stairs.
To know more about Work Done visit:
https://brainly.com/question/31655489
#SPJ11
the current in a series circuit is 13.6 a. when an additional 8.66-ω resistor is inserted in series, the current drops to 10.3 a. what is the resistance in the original circuit?
The resistance in the original circuit is 21.66 Ω.
To find the resistance in the original circuit, we can use Ohm's Law (V = I * R) and the concept of series circuits.
Step 1: Calculate the voltage (V) in the circuit before adding the new resistor.
V_original = I_original * R_original
Step 2: Calculate the voltage (V) after adding the new resistor.
V_new = I_new * (R_original + R_added)
Since the voltage across the circuit remains constant, we can set V_original equal to V_new:
I_original * R_original = I_new * (R_original + R_added)
Now, we can plug in the given values and solve for R_original:
(13.6 A) * R_original = (10.3 A) * (R_original + 8.66 Ω)
After solving for R_original, we get:
R_original = 21.66 Ω
So, the resistance in the original circuit is 21.66 Ω.
To learn more about circuit, refer below:
https://brainly.com/question/27206933
#SPJ11
A 3-phase, 230 V, 60 Hz, 1176 rpm, Y-connected induction motor draws 3105 W and 42.2 A in a no-load test. The
stator resistance per phase is 15 mΩ. The total power drawn at full load is 82 kW and the current is 248 A.
Determine:
(a) The rotational losses
(b) The full load power factor
(c) The power transmitted to the rotor at full load
(d) The rotor I2R losses at full load
(e) The output power and the efficiency at full load
The rotational losses of the motor are 27,896.39 W, the full load power factor is 0.891, and the power transmitted to the rotor at full load is 91.57 kW. The rotor I2R losses at full load are 275.18 W. The output power at full load is 78.44 kW, and the efficiency at full load is 95.3%.
(a) The rotational losses can be calculated as follows:
No-load current = 42.2 A
No-load power = 3 x 230 V x 42.2 A x 0.9 (assumed power factor of 0.9 for no-load test) = 27,904.4 W
Stator copper losses at no-load = [tex]$3 \times (0.0422)^2 \times 15 \text{ m}\Omega$[/tex] = 8.01 W
Rotational losses = No-load power - Stator copper losses = 27,904.4 W - 8.01 W = 27,896.39 W
Therefore, the rotational losses are 27,896.39 W.
(b) The full load power factor can be calculated as follows:
Total power is drawn at full load = 82 kW
Full load current = 248 A
Output power = 3 x 230 V x 248 A x Power factor
Power factor = Output power / (3 x 230 V x 248 A) = 0.891
Therefore, the full load power factor is 0.891.
(c) The power transmitted to the rotor at full load can be calculated as follows:
Slip at full load = (1176 - 1176 x 0.891) / 1176 = 0.109
Output power at full load = 82 kW
Power transmitted to the rotor = Output power / (1 - Slip) = 91.57 kW
Therefore, the power transmitted to the rotor at full load is 91.57 kW.
(d) The rotor I2R losses at full load can be calculated as follows:
Rotor resistance per phase = Stator resistance per phase = 15 mΩ
Rotor I2R losses = [tex]$3 \times (248)^2 \times 15 \text{ m}\Omega$[/tex] = 275.18 W
Therefore, the rotor I2R losses at full load are 275.18 W.
(e) The output power and the efficiency at full load can be calculated as follows:
Output power can be calculated using the torque equation and the slip equation:
Torque at full load = (3 x 230 V x 248 A x 0.891 x (1 - 0.109)) / (2 x π x 60 Hz) = 355.5 Nm
Motor speed at full load = 1176 x (1 - 0.109) = 1050.8 rpm
Output power at full load = Torque x 2 x π x Motor speed / 60 = 78.44 kW
Efficiency at full load = Output power / Input power
Input power at full load = 3 x 230 V x 248 A x 0.891 = 82.3 kW
Therefore, the efficiency at full load is:
Efficiency = 78.44 kW / 82.3 kW = 0.953 or 95.3%
Therefore, the output power at full load is 78.44 kW and the efficiency at full load is 95.3%.
To learn more about power factor
https://brainly.com/question/31325309
#SPJ4
consider the following genotype: yy ss hh we have now added the gene for height: tall (h) or short (h). how many different gamete combinations can be produced?
To answer this question, we need to determine the possible gamete combinations that can be produced by the genotype yy ss hh when the height gene is added. Since the height gene has two possible alleles (tall or short), each individual can produce two types of gametes for this trait.
Therefore, there are four possible gamete combinations for this genotype: yshh, yshh, yshh, and yshh. Each of these gamete combinations can combine with gametes from another individual to produce different offspring with varying genotypes for height. In total, there are 16 possible offspring genotypes that can be produced from these four gamete combinations (4 gamete combinations x 4 possible gamete combinations from the other parent).
Given the genotype "yy ss hh" and the addition of the gene for height with alleles tall (H) and short (h), let's find the number of different gamete combinations that can be produced.
1. Break down the genotype into alleles: y, y, s, s, h, H.
2. Determine the possible combinations for each gene: (y, y), (s, s), and (h, H).
3. Calculate the number of combinations for each gene: 1 combination for y, 1 combination for s, and 2 combinations for h.
4. Multiply the number of combinations for each gene: 1 (y) * 1 (s) * 2 (h) = 2 gamete combinations.
There are two different gamete combinations that can be produced: ysh and ysH.
For more information on genotypes visit:
brainly.com/question/30784786
#SPJ11
A spring with a spring constant of 30.0 N/m is compressed 5.00 m. What is the force that the spring would apply? a) 6.00N. b) 150.N. c) 35.0N. d) 25.0N.
The force applied to spring of spring constant 30 N/m is 150 N.
What is force?Force is the product of mass and acceleration. Force is a vector quantity and the S.I unit of force is Newton (N).
To caculate the force that is applied on the spring, we use the formula below
Formula:
F = ke...................... Equation 1Where:
F = Force applied to the springk = Spring constant of the springe = ExtensionFrom the question,
Given:
k = 30 N/me = 5 mSubstitute these values into equation 1
F = 30×5F = 150 NHence, the right option is b) 150 N.
Learn more about force here: https://brainly.com/question/25573309
#SPJ1
TRUE OR FALSE emission lines of each element is like fingerprint of the element and this property is used in elemental analysis.
TRUE. The emission lines of each element are indeed like fingerprints of the element, and this property is used in elemental analysis.
Emission lines occur when an element is excited and releases energy in the form of light. Each element has a unique set of emission lines, which serve as their "fingerprint." Elemental analysis is the process of identifying and quantifying the elements present in a sample. One way to perform elemental analysis is by using spectroscopy, which analyzes the emission lines produced when a sample is excited.
This method is highly effective in determining the presence and concentration of specific elements in a sample. It is used in various applications, including environmental monitoring, quality control in manufacturing processes, and research in chemistry, physics, and materials science. By studying the unique emission lines of elements, scientists and researchers can accurately identify and quantify the elements in a sample, thus providing valuable information for their respective fields.
To know more about Emission lines, click here;
https://brainly.com/question/31170027
#SPJ11
a student holds a meter stick straight out with one or more masses dangling from it. in which case, is it the most difficult for the student to keep the meter stick from rotating?
In the scenario you described, it would be most difficult for the student to keep the meter stick from rotating when the masses are attached at the farthest point from the student's hand. This is because the torque (rotational force) acting on the meter stick increases with the distance of the mass from the axis of rotation (the student's hand).
The difficulty for the student to keep the meter stick from rotating depends on the distribution of the masses. If the masses are distributed evenly on both sides of the meter stick, it will be easier to balance and keep from rotating. However, if the masses are all on one side of the stick, it will be much more difficult to keep it from rotating. This is because the center of mass will be shifted to one side, causing an imbalance and rotational force. Therefore, the most difficult case for the student to keep the meter stick from rotating is when all the masses are on one side of the stick.
Learn more about meter here:-
https://brainly.com/question/4307551
#SPJ11
a 10-kg object is hanging by a very light wire in an elevator that is traveling upward. the tension in the rope is measured to be 88 n. what are the magnitude and direction of the acceleration of the elevator?
The direction of the acceleration of the elevator is upward.
To determine the magnitude and direction of the acceleration of the elevator, we need to use Newton's second law of motion, which states that force equals mass times acceleration (F=ma).
The tension in the rope, measured to be 88 N, is the force acting on the object. Since the object has a mass of 10 kg, we can use F=ma to calculate the acceleration of the elevator.
88 N = 10 kg x a
a = 8.8 m/s^2
So the magnitude of the acceleration of the elevator is 8.8 m/s^2.
To determine the direction of the acceleration, we need to consider the direction of the forces acting on the object. In this case, the force of gravity is acting downward on the object, while the tension in the rope is acting upward. Since the tension in the rope is greater than the force of gravity, the net force on the object is upward.
Learn more about acceleration here:-
https://brainly.com/question/12550364
#SPJ11
determine the maximum ram force p that can be applied to the clamp at d if the allowable normal stress for the material is σallow = 180 mpa .
The maximum ram force (p) that can be applied to the clamp at d is equal to the allowable normal stress (σallow) multiplied by the area (A) of the clamp at that location.
The maximum ram force (p) that can be applied to the clamp at d is determined by the allowable normal stress (σallow) for the material and the area (A) of the clamp at that point. The allowable normal stress represents the maximum stress that the material can withstand without permanent deformation or failure. By multiplying the allowable normal stress (σallow) by the area (A) of the clamp, we can find the maximum force (p) that can be applied. This ensures that the force exerted on the clamp does not exceed the material's strength and avoids any potential damage or failure.
Learn more about allowable normal stress here:
https://brainly.com/question/31984258
#SPJ11
why is the speed of conduction through a reflex arc slower than the speed of conduction of an action potential along an axon?
The speed of conduction through a reflex arc is slower than the speed of conduction of an action potential along an axon because the reflex arc involves additional synaptic connections, which introduce delays in signal transmission.
The speed of conduction through a reflex arc is slower than the speed of conduction of an action potential along an axon due to additional synaptic connections involved in the reflex arc. In a reflex arc, the sensory neuron carries the signal from the sensory receptor to the spinal cord, where it synapses with an interneuron before reaching the motor neuron. This synaptic transmission introduces a delay as the chemical neurotransmitters need to cross the synaptic cleft. In contrast, in the conduction of an action potential along an axon, there are no synaptic connections involved, allowing for a faster propagation of the electrical signal along the length of the axon.
Learn more about reflex arc here:
https://brainly.com/question/894334
#SPJ11
Soda from a mS = 12 oz can at temperature TS = 13.5°C is poured in its entirety into a glass containing a mass mI = 0.18 kg amount of ice at temperature TI = -15°C. Assume that ice and water have the following specific heats: cI = 2090 J/(kg⋅°C) and cS = 4186 J/(kg⋅°C), and the latent heat of fusion of ice is Lf = 334 kJ/kg. In this problem you can assume that 1 kg of either soda or water corresponds to 35.273 oz.
The final temperature of the soda-water mixture is approximately 34.9°C.
The task is to determine the final temperature of the soda-water mixture after all of the ice has melted. The solution is calculating the amount of heat received by the ice, the amount of heat lost by the soda, and the amount of heat required to melt the ice.
First, we must convert the soda and ice masses to kilogrammes:
mI = 0.18 kg mS = 12 oz / 35.273 oz/kg = 0.34 kilogramme
The amount of heat lost by the soda as it cools from its initial temperature of 13.5°C to the final temperature can then be calculated:
Qlost = 0.34 kg * 4186 J/(kg°C) * (13.5°C)
Qlost = 0.34 kg * 4186 J/(kg°C) * (13.5°C )
Similarly, we can calculate how much heat the ice gains when it warms from -15°C to 0°C and finally melts at 0°C:
Qgain = mI*cI*T + mI*Lf
T = (0°C - (-15°C)) = 15°C
Because the heat lost by the soda is equal to the heat gained by the ice, we can set Qlost = Qgain and solve for:
0.34 kg * 4186 J/kg°C * (13.5°C - F
= 0.18 kg * 2090 J/kg°C 15°C + 0.18 kg
= 334000 J/kg
When we simplify this equation, we get:
= 34.9°C = 15432 - 1423.88
= 10530 + 60012 49709
= 1423.88
For such more question on temperature:
https://brainly.com/question/26866637
#SPJ11