HCl is the most polar due to the high electronegativity of Cl.
Hydrogen chloride is a diatomic molecule, composed of a hydrogen atom, H, and a chlorine atom, Cl, joined by a polar covalent bond. The bond is a polar covalent bond because the chlorine atom is much more electronegative than the hydrogen atom.
Positively charged protons in the nucleus attract negatively charged electrons. As the number of protons in the nucleus increases, the electronegativity, or attractive force, increases. Therefore, electronegativity increases in a row from left to right on the periodic table.
Learn more about electronegativity visit:
brainly.com/question/17762711
#SPJ4
You just created the equality 1 fluid oz = 29. 7 mL. Use this equality to determine how many ounces of water will be measured using the measuring cup introduced before Part A when making the cake.
Express your answer numerically in ounces to two significant figures
2 ounces of water will be measured using the measuring cup introducing before part A when making the cake.
Both units (that is, ml and ounces) are equal, meaning they measure the same quantity and can be converted to each other.
Given that:
1fluid oz = 29.7ml
Part A measurements are not shown. Therefore, we will explain using hypothetical values.
Let the amount of water measured with the measuring cup in part A be 10 ml.
The equivalent number of ounces (x) is calculated as follows:
1 fluid oz = 29.7ml
x = 10ml
By using equality
x * 29.7ml = 1 fluid oz * 10ml
By canceling common units
x * 29.7 = 10 fluid oz
Divide both sides by 29.7.
x = 0.3367 fluid oz
Approximate to the nearest half.
x = 0.5 fluid oz
This means that the equivalent amount of water is 0.5 ounces.
What if the measurement is 55mL.
We apply the same steps here also:
x fluid oz = 55ml
x *29.7 = 1 fluid oz * 55 ml
Divide both sides by 29.7
x = 2 fluid oz
This means that the equivalent amount of water is 2 ounces.
Learn more about equivalent visit:
brainly.com/question/1434279
#SPJ4
Determine the number of atoms of each element in the following:4P4O10
Answer:
16 P
40 O
Explanation:
You have 4 moles of P4O10
Therefore you multiply the subscript of each atom of the compound by 4.
There are 4 phosphorus atoms in 1 mole of P4O10 so in 4 moles you would have 4*4 atoms so 16
There are 10 oxygen atoms in 1 mole of P4O10 so in 4 moles you would have 4*10 so 40
What is the name of most reactive non-metal element on the periodic table?
The name of most reactive non-metal element on the periodic table is fluorine
Fluorine is the nonmetal in the periodic table that is the most reactive.
On the Pauling scale, it has the highest electronegativity of any element (3.98). Fluorine is a highly reactive, diatomic gas that may mix with practically every other element to form compounds that have entirely different properties from either of the original components. The boiling point of fluorine is -188 °C (-310 °F).
Hydrofluoric acid and hydrogen fluoride gas are produced during the reaction with water: HF + H₂O ⇒H⁺ + HF + OH.
Chemical elements are shown on a periodic table in order of their atomic number. The classification of elements and their relationships to one another can be understood using the periodic table.
Learn more about reactivity at https://brainly.com/question/20570629
#SPJ4
The statement "atoms have a small, dense nucleus" is true. What evidence do scientists use to prove this statement as true?
Most alpha particles shot at gold foil go straight through, without any changes in their direction.
The particles ejected in Thomson's experiment bent away from the negatively charged plates, but toward positively charged plates.
A few alpha particles shot at gold foil bounce in the opposite direction
No matter which element Thomson put in a cathode ray tube, the smae negative particles wit the same properties (such as charge and mass) were ejectected.
In the gold foil experiment, alpha particles shot at gold foil bounced in the opposite direction from a gold foil which indicated atoms have a small, dense nucleus.
What is the gold foil experiment?Rutherford’s α-particle scattering or gold foil experiment changed our perception of the atomic structure of an atom. Rutherford bombarded beams of α-particles at thin gold foil and observed how the α-particles scattered from the gold foil.
Rutherford showed that the atom has the most empty space with the nucleus at the center and electrons rotating around the atomic nucleus. Highly charged α-particles passed straight undeflected through the foil. This will be the expected result if the plum pudding model of Thomson was correct.
A few charged alpha particles were deflected backward direction leading to the positive charge concentrated in a small space.
Learn more about the gold foil experiment, here:
brainly.com/question/4593249
#SPJ1
J.J Thomson's experiments provided what evidence about atoms?
a) atoms are the smallest particles of matter
b) atoms contain negatively charged particles
c) atoms have a negative charge
d) atoms have a positive charge
How does glycolysis make 32 ATP?
Both anaerobic and aerobic conditions can result in glycolysis. Pyruvate joins the citric acid cycle under aerobic conditions and proceeds through oxidative phosphorylation, which results in the net synthesis of 32 ATP molecules.
What is an example of anaerobic activity?Anaerobic exercises require small bursts of energy and are finished rapidly while exerting maximum effort. Examples include jumping, jogging, and hard weightlifting. Your breathing and heart rate alter as you engage in aerobic vs anaerobic activities. During aerobic workouts, oxygen is your major source of energy.
What exactly does it mean to be anaerobic?Anaerobic means "without oxygen," whereas aerobic indicates the existence of oxygen. Both are important for your overall health since they put your body through different difficulties. Anaerobic exercise consists of short bursts of high-intensity activity that do not demand your body to consume oxygen as it would during cardio (or aerobic) exercise.
Here,
Glycolysis can occur under both anaerobic and aerobic settings. Under aerobic circumstances, pyruvate enters the citric acid cycle and goes through oxidative phosphorylation, resulting in the net production of 32 ATP molecules.
To know more about anaerobic respiration visit:
https://brainly.com/question/13515664
#SPJ4
In this redox reaction, identify the element that was reduced. Fe2O3 3CO 2Fe 3CO2 A. C B. CO C. Fe D. FeO E. O
the element that was reduced in this redox reaction is Fe
A redox reaction, also known as an oxidation-reduction or redox reaction, involves the exchange of electrons between chemical entities (the atoms, ions, or molecules involved in the reaction). Redox reactions occur everywhere; they are involved in the burning of fuels, the rusting of metals, and even the processes of photosynthesis and cellular respiration.Some species experience oxidation, or the loss of electrons, while others experience reduction, or the gain of electrons, during a redox process. Take rust, which results from the interaction of iron and oxygen:The third selection from the options presented above is the right response. The element that was reduced in the described redox reaction was Fe, or iron. It now has a neutral charge after having its +3 charge lowered.
Learn more about redox reaction.
brainly.com/question/13293425
#SPJ4
Problems that can be caused by both the complete and incomplete
combustion of methane in a gas fire.
Answer:
carbon dioxide produced, or carbon monoxide, soot produced and Soot can cause breathing problems and it blackens buildings.
Explanation:
During complete combustion carbon and hydrogen combine with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O). During incomplete combustion part of the carbon is not completely oxidized producing soot or carbon monoxide (CO).
How the structure of molecule affects physical properties?
The structure of a molecule affects its physical properties because the arrangement of the atoms in the molecule determines the type of forces that interact between molecules.
And that forces affect how the molecules move and interact with each other. This, in turn, affects the physical properties of the molecule, such as its melting point, boiling point, polarity, and solubility.
For example, when a molecule has a higher number of non-polar bonds due to symmetrical structures, it will be less polar overall and have fewer attractive forces acting between molecules, resulting in a higher boiling point and lower solubility.
On the other hand, a molecule with a higher number of polar bonds due to asymmetrical structures will be more polar overall, leading to stronger attractive forces acting between molecules, resulting in a lower boiling point and higher solubility.
For more questions like Properties click the link below:
https://brainly.com/question/13562531
#SPJ4
What is the volume of water in the graduated cylinder?
Part A
Which of the following best describes the side chain of arginine at a pH of 11?
nonpolar
uncharged but polar
charged and polar
aprotic
hydrophobic
Charged and polar is incorrect. My textbook says the pKa of the sidechain is 12.48. Can you please explain what the correct answer is?
At a pH of 11, the side chain of arginine would be positively charged (NH3+) and polar.
This is because the pKa of the guanidine group (NH2) in the side chain of arginine is 12.48, which means that at a pH greater than 12.48, the guanidine group will be protonated and carry a positive charge. Since the nitrogen atom in the guanidine group is also surrounded by hydrogen atoms, the side chain is polar.
Key points:
The side chain of arginine is a guanidine group (NH2).The pKa of the guanidine group is 12.48, which means that at a pH greater than 12.48, the guanidine group will be protonated (NH3+).When protonated, the guanidine group carries a positive charge.The nitrogen atom in the guanidine group is surrounded by hydrogen atoms, which makes the side chain polar in nature.Learn more about arginine here:
https://brainly.com/question/28368975
#SPJ4
A student places a sample of a pure metal in a crucible and heats it strongly in air. Data from the experiment are given in the table above. The final mass was determined after the sample was cooled to room temperature. Which of the following statements related to the experiment is correct? (See attached table)
a.) The mass of the sample decreased, so physical changes occurred as the metal first melted and then boiled out of the crucible.
b.) The mass of the sample increased, so a chemical change occurred when bonds formed between the metal and another substance.
c.) There was nothing for the metal to react with, so only a physical change could have occurred.
d.) The sample was only heated, so neither a physical nor a chemical change occurred.
The correct answer is option A. The mass of the sample decreased, so physical changes occurred as the metal first melted and then boiled out of the crucible. The decrease in mass is a result of the metal melting and then vaporizing as it is heated.
What is physical changes?Physical changes refer to changes in the physical properties of a substance without altering its chemical composition. Examples of physical changes include melting, freezing, condensation, vaporization, sublimation, and physical state changes. Physical changes occur when a substance changes from one state of matter to another without a chemical reaction taking place.
This is an example of a physical change, as the material is changed from a solid to a liquid and then to a gas, but its chemical composition remains the same.
To learn more about physical changes
https://brainly.com/question/11370755
#SPJ4
Which of the following molecules act as building blocks (monomers) of polypeptides?
A) 1, 4, and 6
B) 2, 7, and 8
C) 7, 8, and 13
D) 11, 12, and 13
E) 12, 13, and 15
B) 2, 7, and 8 of the following molecules act as building blocks (monomers) of polypeptides.
Are polypeptides' building components proteins?You may think of it as several flavors that come together to form lengthy chains that we refer to as polypeptides, which are the fundamental components of proteins.
What types of bonds do polypeptides contain?Peptide bonds bind the amino acids together in polypeptides. The interaction between the -carboxyl and -amino groups of two amino acids results in the formation of a dipeptide.
learn more about polypeptides
https://brainly.com/question/11136648
#SPJ4
Rusting as a redox reaction in details
The reactant is iron (Fe) and the oxidizing agent is oxygen (O). This reaction results in the the formation of a compound known as iron oxide (Fe2O3), which is commonly referred to as rust. The reaction can be written as:
Fe + O2 --> Fe2O3
The oxidation process involves the loss of electrons from the Fe atoms, as oxygen gains electrons and is reduced. The electrons are transferred from the iron to the oxygen, resulting in the formation of iron oxide, which is an insoluble solid.
An oxidation-reduction reaction, or redox reaction, is a reaction in which there is a transfer of electrons between chemical species (the atoms, ions, or molecules involved in the reaction).
The reaction can be written as: [tex]\bold{Fe + O2 \Rightarrow Fe_2O_3}[/tex]
What room in a house is similar to the chloroplasts in a cell
Before we use our imaginations to try and think of a fitting room, let's take a look at what a chloroplast is.
A chloroplast is the organelle in plant-based cells responsible for energy production. Through photosynthesis (you've probably heard of this before!), they use sunlight to create energy for the plant to function.
Since the chloroplast is the energy-maker for the cell, we need to imagine a room in a house that does something like this. There's a couple things that come to my mind. Firstly, although they don't really count as rooms, something like solar panels would probably make the most sense here. Since the answer asks for a room, though, solar panels don't work.
Maybe a kitchen? The kitchen is the room where food is created, supplying energy to all the inhabitants of a house.
I hope this helped! Learning about the components of cells is a little complicated at the start, but it's definitely a very exciting topic that only gets more and more interesting the deeper you delve into it.
- breezy ツ
if a researcher wanted to temporarily denature a protein but wanted to be sure it would refold, which of the following methods or substances would be most appropriate
If a researcher wanted to the temporarily denature a protein but wanted to be sure it would refold, the method or the substances would be most appropriate is the urea.
The denature is defined as the process of the modification of the molecular structure of the protein. In this method it involves the breaking of the many weak linkage or the bonds in the protein molecules. It is responsible for highly ordered of the structure of the protein in the natural of state.
Thus, the urea is the appropriate substances , if the researcher wanted to the temporary denature the proteins.
To learn more about denature here
https://brainly.com/question/14580687
#SPJ4
Antarctica contains 26. 8 million cubic kilometers of ice. Assume that the average temperature of this ice during the summer months is20 ∘C If all of this were heated to 4 ∘C and melted to form water, what volume of liquid water would form?
Volume of liquid water would be approximately 24 million km³.
Volume(V) of ice at 20° is;
Vi = 26.8×10⁶ km³
Density is depend upon the mass and volume
∴ p =m/v
where; p = Density
m = Mass
v = Volume
Density of ice p(i) = 0.92g /cm³
Density of water at 4°C is;
p(w) = 1g/cm³
If ice is melt then,
mass(m) of water = mass(m) of ice
p(w) = p(i)
V = p(i)/p(w)
0.92g / cm³/1g/cm³×26.8×10⁶ km³
24.5 ˣ 10⁶ km³
≈24 million km³
To know more about, mass click here :
brainly.com/question/19694949
#SPJ4
What mass of copper(II) sulfate would remain
after removing all the water from 55 g of
CuSO4 · 5 H2O?
Answer in units of g.
According to the concept of molar mass and stoichiometry, the mass of copper(II) sulfate that would remain after removing all the water from 55 g of CuSO₄ · 5 H₂O is 35.18 g.
What is molar mass?Molar mass of a compound or a molecule is defined as the mass of the elements which are present in it.The molar mass is considered to be a bulk quantity not a molecular quantity. It is often an average of the of the masses at many instances.
Molar masses of an element are given as relative atomic masses while that of compounds is the sum of relative atomic masses which are present in the compound.
In copper(II) sulfate , 249.68 g of copper (II) sulfate has 90 g water, thus 55 g of copper (II) sulfate will have 55×90/249.68=19.82 g water, so mass of copper sulfate= 55-19.82=35.18 g copper(II) sulfate.
Thus,35.18 g copper(II) sulfate would remain after removing all the water from 55 g of CuSO₄ · 5 H₂O.
Learn more about molar mass,here:
https://brainly.com/question/30216315
#SPJ1
What is the mass % of carbon in dimethylsulfoxide (C2H6SO) rounded to three significant figures? A) 7.74 B) 78.1 C) 25.4 D) 30.7 E) 28.6
The mass % of carbon in dimethyl sulfoxide (C2H6SO) rounded to three significant figure is calculated as 30.718%.
What is mass percentage?Mass percent of a solution is defined as the ratio of the mass of solute that is present in solution, relative to the mass of solution as a whole. To calculate mass percent of an element in a compound, we divide mass of the element in 1 mole of the compound by the molar mass and then multiply the result by 100.
As we know molar mass of carbon is 12 g/mol and molar mass of dimethyl sulfoxide is 78.13 g/mol
Mass % of carbon (C2) in dimethyl sulfoxide (C2H6SO) = 2* (12/78.13) * 100
= 30.718%
To know more about mass percent, refer
https://brainly.com/question/26150306
#SPJ4
Suppose 114 mg of an unknown protein is dissolved in enough solvent to make 5.00 mL of solution. The osmotic pressure of this solution is measured to be 0.0761 atm at 25.0 degrees Celsius. Calculate the molar mass of the protein.
The pressure difference required to stop solvent from flowing through a semipermeable membrane is known as the osmotic pressure of a solution.
The molar concentration of the solute particles in solution directly relates to the osmotic pressure of a solution. Because a solution has a higher concentration of a solute than pure water does, water from pure water wants to diffuse or go by osmosis to the solution. Therefore, the osmotic pressure of a solution is always greater than that of pure water or solvent because it is necessary to prevent water from entering the solution. A semipermeable membrane can no longer pass water through it due to osmotic pressure. The osmotic pressure formula can be used to determine this pressure, which in turn inhibits osmosis from taking place.
Learn more about concentration here-
https://brainly.com/question/10725862
#SPJ4
what are the two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances?
The two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances are mass (m) and volume (V).
To calculate the unit factor, we need to divide the unit of the desired quantity by the unit of the given quantity. For example, to convert from mass to volume, the unit factor is V/m.
This unit factor can then be used to convert mass to volume or vice versa. Dimensional analysis helps us to determine the proper units for a given equation and to convert from one unit to another.
It also allows us to compare different units of measurement and to check that the units in both sides of an equation match. This is especially useful in chemical calculations, where it is important to ensure the correct units are used.
For more questions like Dimensional analysis click the link below:
https://brainly.com/question/23510660
#SPJ4
If 25.0 mL of 15M nitric acid is diluted to 125 mL, what is the concentration of the new solution?
Answer:2.5M
Explanation:
let the number of moles = x
x/0.025L =15
x= 15*0.025 = 0.375 moles
the concentration of the new solution = moles / volume =
0.375 / (0.025+0.125) = 2.5M
Calculate the molarity of a solution of HNO3 if 15.72 mL of the solution neutralize 28.2 mL of 0.100 M H2SO4 solution
The molarity of a solution of HNO3 if 15.72 mL of the solution neutralize 28.2 mL of 0.100 M H2SO4 solution is 0.89 x 10^-4M
Given the volume of HNO3(V1) = 15.72mL
The volume of H2SO4 (V2) = 28.2mL
concentration of H2SO4 (M2) = 0.100M
Concentration of HNO3 = M1
We know that c = n/v where n is the number of moles.
The moles of H2SO4 (n2) = V2 X M2/1000
n2 = 28.2 x 0.100 /1000 = 28. 2 x 10^-4
From the reaction: H2SO4 + HNO3 -> NO2+ + HSO4- +H2O
We can see from the equation that the number of moles of HNO3 must be half that number, so: n1 = 28. 2 x 10^-4 /2 = 14.1 x 10^-4
M1 = 14.1 x 10^-4/15.72 = 0.89 x 10^-4M
To learn more about molarity click here https://brainly.com/question/8732513
#SPJ4
Base your answer to the following question on the elements below. (A) Boron (B) Rubidium (C) Nitrogen (D) Mercury A highly reactive element A) A B) B C) C D) D
B) Rubidium is a highly reactive element.
Rubidium is a highly reactive element due to its low ionization energy, which makes it easily lose electrons and form compounds. It is considered to be one of the most reactive alkali metals.
When it comes into contact with water or air making rubidium is highly flammable. It can ignite spontaneously in the air and reacts violently with water to produce rubidium hydroxide and hydrogen gas.
Being noticeably more reactive than potassium but less so than cesium, it is likely to react with substances that are dangerous with sodium or potassium more forcefully. When rubidium is exposed to air or dry oxygen, it ignites, mostly generating oxide.
Learn more about Rubidium here: https://brainly.com/question/19949181
#SPJ4
a student collected a sample of hydrogen gas by the displacement of water. Calculate the number of molecules of water vapor in the sample of gas
Using a method known as water displacement, gases created during laboratory experiments are frequently collected. To obtain the accurate value of the gas's pressure .
The vapor pressure caused by water in a sample can be compensated for. The gas is not pure since it is combined with water vapor from evaporating water because it is gathered above water. By deducting the contribution of the water vapor, one may apply Dalton's law to determine how much of the desired gas is present: P total equals Pg plus PH 2O. The required gas's pressure is P g. Pg = P Total + P H 2 O List the known quantities and make a plan for the issue. pressure in the atmosphere. A water pan is filled with a bottle that has been turned upside down and filled with water. Rubber tubing that is attached to the reaction flask and supplied underneath the water bottle.
To learn more about pressure please click on below link
https://brainly.com/question/12971272
#SPJ4
The two elements that are frequently used for making transistors are
A. boron and aluminium
B. silicon and germanium
C. iridium and tungsten
D. niobium and columbium
The two elements that are frequently used for making transistors are niobium and columbium.
What is an element?It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
Learn more about elements,here:
https://brainly.com/question/14347616
#SPJ1
the data in the table show the amount of 500 g sample of sodium-24 over time. make a graph of the data (remember to label all axes and title the graph)
The amount of sodium-24 decreases to approximately 125 g.
What is sodium?Sodium is a chemical element with the symbol Na on the periodic table. It is a soft, silvery-white, highly reactive metal and is a member of the alkali metal group of chemical elements.
The graph below shows the amount of 500 g sample of sodium-24 over time. The x-axis of the graph represents time (in hours), and the y-axis represents the amount of sodium-24 (in grams). The title of the graph is "Amount of sodium-24 in 500 g Sample Over Time".
The graph shows that the amount of sodium-24 in the sample decreases over time. After 24 hours, the amount of sodium-24 in the sample decreases to approximately 375 g. After 48 hours, the amount of sodium-24 decreases to approximately 250 g. After 72 hours, the amount of sodium-24 decreases to approximately 125 g.
To learn more about sodium
https://brainly.com/question/25597694
#SPJ1
Rutherford's scattering experiment demonstrated Question 9 options: the existence of protons. the existence of electrons. the existence of neutrons. that most of the mass of an atom is in its nucleus. that the charge-to-mass ratio of an electron is constant.
He came to the conclusion that mass and positive charge are concentrated at the center of the atom from a small number of alpha particles deflected by huge angles with a 180.
Rutherford discovered that most positively charged alpha particles in his gold foil experiment passed straight through the foil without being deflected, leading him to believe that the majority of the atom's space is largely empty.
He came to the conclusion that mass and positive charge are concentrated at the center of the atom because there are few alpha particles that are deflected by huge angles with a 180. Rutherford Atomic Model - J. J. Thomson's "plum pudding" model was unable to account for some experimental findings related to the atomic structure of elements. British scientist Ernest Rutherford performed.
Learn more about atom here-
https://brainly.com/question/1566330
#SPJ4
why the bond between hydrogen and oxygen in a water molecule is more polar than the bond between hydrogen and nitrogen in an ammonia molecule.
Since oxygen has a higher electronegative charge than hydrogen, the two bonds that are created will be polar covalent, which means that oxygen.
which has a higher electronegative charge, will have a partial negative charge, and hydrogen, which has a partial positive charge. Each water molecule has a small hydrogen charge that attracts neighboring oxygen atoms and negatively charged areas of other molecules. While holding water together and giving it intriguing features, the hydrogen bond between the hydrogen of one water molecule and the oxygen of another... For water, this is how it functions. Due to the molecule's bent structure, water (H 2 O) is polar. Most of the negative charge from the oxygen is indicated by the shape.
To learn more about electronegative please click on below link
https://brainly.com/question/17762711
#SPJ4
Which of the following alkenes cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water? X X II III DIVE, III and IV II &IX
Among the following alkenes (D) IV cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water.
An alkene must first be brominated by an addition reaction that produces a vicinal dibromide in order to transform it into an alkyne. All alkenes that have at least one double bond double substituted render them unsuitable for this method due to the requirement of this vicinal dibromide. This is so that the alkane can undergo a double elimination and produce an alkene, which needs at least one C-H and C-X bond. This hinders the conversion of molecule IV into an alkyne.
The dibromo alkane would change into the provided alkene by losing one unit of HBr if it were to react with bromine. However, the second beta-elimination cannot take place since there isn't hydrogen that is physically linked to the alkene carbon. So (D) IV is the right option.
You can also learn about dibromide from the following question:
https://brainly.com/question/11530316
#SPJ4