Write equations to show how these substances ionize or dissociate in water.
a.) NH4Cl
b.) Cu(NO3)2
c.) HgCl2

The monoprotic weak acid when it dissolved in the water is the 0.91 M dissociated and it will produces the solution with the pH of the 3.42. The Ka of the acid is 1.5 ×  10⁻⁷ M.

The pH of the monoprotic weak acid= 3.42

pH = - log [H⁺]

[H⁺] = [tex]10^{-3.42}[/tex]

[H⁺] = 0.00038 M

The hydrogen ion concentration is 0.00038 M.

The chemical equation is as :

HA  ⇄ H⁺  +  A⁻

The expression for the Ka is :

Ka = [H⁺]² / [HA]

Since , [ H⁺ ]= [ A⁻]

Ka = (0.00038)² / ( 0.91 - 0.00038)

Ka = 1.4 × 10⁻⁷ / 0.909

Ka = 1.5 ×  10⁻⁷ M.

The Ka for the monoprotic weak acid is 1.5 ×  10⁻⁷ M.

To learn more about monoprotic acid here

https://brainly.com/question/31732916

#SPJ4

The percent yield of the alum is 99.72%.

To calculate the percent yield of the alum, you need to know the theoretical yield of the reaction. The theoretical yield is the amount of alum that would be produced if the reaction went to completion without any loss of product.

Assuming you started with all the necessary reactants and the reaction went to completion, you can calculate the theoretical yield using the balanced chemical equation for the reaction.

Let's say the reaction is:

KAl(SO4)2·12H2O + Na2CO3 → NaAl(SO4)2·12H2O + 2 NaHCO3

The molar mass of alum (NaAl(SO4)2·12H2O) is 474.39 g/mol.

So, to find the theoretical yield:

- Convert the mass of alum you isolated (17.782 g) to moles by dividing by the molar mass:    17.782 g / 474.39 g/mol = 0.0375 mol

- Use the mole ratio from the balanced equation to find the moles of alum that should have been produced:

   1 mol KAl(SO4)2·12H2O : 1 mol NaAl(SO4)2·12H2O

 0.0375 mol KAl(SO4)2·12H2O → 0.0375 mol NaAl(SO4)2·12H2O

- Convert the moles of alum to grams by multiplying by the molar mass:

 0.0375 mol NaAl(SO4)2·12H2O x 474.39 g/mol = 17.831 g

So, the theoretical yield of alum is 17.831 g.

To calculate the percent yield, divide the actual yield (the amount you isolated, 17.782 g) by the theoretical yield (17.831 g) and multiply by 100:

   Percent yield = (actual yield / theoretical yield) x 100%

   Percent yield = (17.782 g / 17.831 g) x 100% = 99.72%

Therefore, the percent yield of the alum is 99.72%.

Learn more about the word percent here,

https://brainly.com/question/31613203

#SPJ11

What is the effect of increasing the pressure on the equilibrium of the reaction 2NO2 <--> N2O4?

Increasing the pressure will shift the equilibrium towards the side with fewer moles of gas, which in this case is the N2O4 side.

When the pressure is increased, the equilibrium will shift to the side with fewer moles of gas in order to reduce the pressure. Since there are two moles of NO2 on the left side and only one mole of N2O4 on the right side, the equilibrium will shift towards the N2O4 side. This will result in an increase in the concentration of N2O4 and a decrease in the concentration of NO2 until a new equilibrium is established. This phenomenon is known as Le Chatelier's principle and is widely used to predict the effect of various changes on a chemical equilibrium.

Learn more about tetraoxide  here:

https://brainly.com/question/19336705

#SPJ11

The rate constant [tex]k_{cat}[/tex] is a measure of the catalytic efficiency of an enzyme (option A) and the rate constant for the reaction ES → E + P (option C). This makes option e) A and C above the correct answer.

[tex]k_{cat}[/tex] also known as the turnover number, represents the number of substrate molecules that an enzyme can convert into products per unit of time under saturated substrate conditions. This constant is a crucial factor in determining the efficiency of an enzyme, as higher [tex]k_{cat}[/tex] values indicate that an enzyme can catalyze reactions more rapidly.
Additionally, [tex]k_{cat}[/tex] is the rate constant for the reaction where the enzyme-substrate complex (ES) breaks down into the enzyme (E) and the product (P). This step is essential in enzyme-catalyzed reactions as it ensures that the enzyme can be reused for future reactions.
To summarize, [tex]k_{cat}[/tex] is an essential parameter for assessing the catalytic efficiency of an enzyme and is the rate constant for the ES → E + P reaction. Therefore, option E, which includes both A and C, is the correct answer to your question.

To learn more about rate constant, refer:-

https://brainly.com/question/20305922

#SPJ11

The ΔH°rxn for the reaction: [tex]2NO(g) + O_2(g) = 2NO_2(g)[/tex] is +102 kJ.

To find ΔH°rxn for the reaction: [tex]2NO(g) + O_2(g) = 2NO_2(g)[/tex], we need to use the given standard enthalpies of formation and/or standard enthalpies of reaction. Since the given enthalpies are for the formation or decomposition of different species, we need to use some algebra to manipulate the equations in order to cancel out the intermediates.

First, we can write the given equation for the formation of [tex]NO_2:[/tex]

[tex]1/2 N_2(g) + O_2(g) = NO_2(g)[/tex] ΔH°rxn = +33 kJ

We can then multiply this equation by 4 to get rid of the 1/2 coefficient:

[tex]2N_2(g) + 2O_2(g) = 4NO_2(g)[/tex] ΔH°rxn = +132 kJ

Next, we can use the given equation for the formation of NO:

[tex]N_2(g) + O_2(g) = 2NO(g)[/tex] ΔH°rxn = +183 kJ

We can then multiply this equation by 2 to get rid of the coefficient of 2 in the final equation:

[tex]2N_2(g) + 4O_2(g) = 4NO(g)[/tex] ΔH°rxn = +366 kJ

Now, we can combine the two equations above to cancel out the NO intermediates:

[tex]2N_2(g) + 4O_2(g) = 4NO(g)[/tex] ΔH°rxn = +366 kJ

[tex]4NO(g) + 2O_2(g) = 4NO_2(g)[/tex] ΔH°rxn = -264 kJ

If we add these two equations together, we get the desired equation:

[tex]2N_2(g) + 6O_2(g) = 4NO_2(g)[/tex] ΔH°rxn = +102 kJ

For more question on reaction click on

https://brainly.com/question/29470602

#SPJ11

The enthalpy change for the reaction 2NO(g) + O2(g) → 2NO2(g) can be calculated using Hess's law by subtracting the enthalpy change of the intermediate reaction from the enthalpy change of the target reaction.

ΔH°rxn for the target reaction = (2 x ΔH°rxn of reaction 2) - (ΔH°rxn of reaction 1)

Substituting the given values, we get:

ΔH°rxn = (2 x (+33 kJ)) - (+183 kJ)

ΔH°rxn = -117 kJ

Therefore, the enthalpy change for the reaction 2NO(g) + O2(g) → 2NO2(g) is -117 kJ. This means that the reaction is exothermic and releases 117 kJ of energy per mole of reaction.

The negative sign indicates that the reaction releases heat to the surroundings.

Learn more about Hess's law here :

https://brainly.com/question/31508978

#SPJ11

The δG of the hypothetical reaction 2A(s) + B2(g) → 2AB(g) is -1118.4 kJ

To find the δg of the given reaction, we can use the formula:

δg = δg(products) - δg(reactants)

First, we need to reverse the equation for the first given reaction, since we need it in the opposite direction:

ab2(g) → a(s) b2(g) δg = +147.0 kj

Then, we can add the two given reactions together to get the overall reaction:

2ab(g) b2(g) + ab2(g) → 2ab2(g) + a(s) b2(g)

Now we can use the formula:

δg = δg(products) - δg(reactants)

δg = (-632.7 kj + 0 kj) - (-147.0 kj + 147.0 kj)

δg = -632.7 kj + 147.0 kj

δg = -485.7 kj

Therefore, the δg of the given reaction is -485.7 kj.
To find the δG of the given hypothetical reaction, we need to manipulate the given reactions to match the desired reaction. Here's how we can do it:

1. Reverse the first reaction:
a(s) + B2(g) → AB2(g); δG = +147.0 kJ

2. Multiply the second reaction by 2:
2AB(g) + 2B2(g) → 2AB2(g); δG = -1265.4 kJ

Now, add the modified reactions together:

a(s) + B2(g) + 2AB(g) + 2B2(g) → AB2(g) + 2AB(g) + 2AB2(g)

Simplify by removing AB2(g) and one B2(g) from both sides:

2A(s) + B2(g) → 2AB(g)

Now, add the modified δG values together:

δG = +147.0 kJ + (-1265.4 kJ) = -1118.4 kJ

To know more about reaction visit:-

https://brainly.com/question/31257177

#SPJ1
.

The correct order of ranking according to  Cahn-Ingold-Prelog rules is as follows: NH₂, CH₂OH, D, H.

Cahn, Ingold, and Prelog formulated a rule to specify the arrangement of the atoms or groups that are present in an asymmetric molecule. This rule is called a Cahn-Ingold-Prelog system. This system is generally used in the R, S system of nomenclature.

According to this rule, such an atom that is directly linked to the asymmetric carbon atom is given the highest priority that has the highest atomic number. So here  Nitrogen atom of  NH₂ molecule is given the highest priority because Nitrogen has 7 atomic numbers. Carbon atom of  CH₂OH molecule  has 6 atomic number. So it is given 2nd position. Deuterium and Hydrogen have 2 and 1 atomic numbers respectively so the are given 3rd and 4th order respectively.                                    

To know more about  Cahn-Ingold-Prelog here

https://brainly.com/question/24198941

#SPJ4

The complete question should be

Rank the following groups in terms of their priority according to the Cahn-Ingold-Prelog system of priorities. Give the highest ranking group a priority of 1 and the lowest ranking group a priority of 4.

a. D

b. H

c. NH₂

d. CH₂OH        

As the candle burns, the reading on the scale would decrease due to the decrease in the candle's mass caused by the release of gases that exert a pressure inside a closed system.

As a candle burns, the size of the candle decreases, but the reading on the balance does not change. The reading on the scale would change as the candle burns if the candle was not in a closed system as follows:

It is assumed that if the candle is not in a closed system, the candle will burn less efficiently, which means that it will release more gases into the atmosphere. When a candle burns, the wax melts, and the liquid wax is drawn up the wick by capillary action. Then, the heat of the flame vaporizes the liquid wax, creating a candle flame, which is fueled by the wax vapour.

However, when a candle burns, it does not just release heat. Gases are also formed during combustion. If these gases are confined, they exert a pressure. If the candle is in an open system, the gases will be released into the atmosphere and will not cause any pressure. If the candle is in a closed system, the gases will exert a pressure that is measurable on a scale.

To leran more about candle's mass refer:-

https://brainly.com/question/30327005

#SPJ11

The given reaction can be written as:3AgNO3 + Au + 6HCl → 3AgCl↓ + HAuCl4 + 3HNO3.Since equal masses of all reactants are taken, we can assume 25.33 g of each reactant is present.The limiting reactant will be the reactant that produces the least amount of product.

Here, AgNO3 is the limiting reactant as it produces 3 moles of product per mole of AgNO3.The molar mass of AgNO3 is given as: M(AgNO3) = 169.9 g/mol Number of moles of AgNO3 present = (25.33/169.9) mol = 0.149 mol According to the balanced equation, one mole of AgNO3 produces one mole of Au salt. Therefore, the number of moles of Au salt produced is also 0.149 mol.The molar mass of AuCl3 is given as: M(AuCl3) = 303.3 g/mol The mass of Au salt produced is given as:Mass = molar mass × number of moles= 303.3 × 0.149 g= 45.19 g. We can use the balanced equation of the reaction to determine the mass of the gold salt produced. The reaction is given as:

3AgNO3 + Au + 6HCl → 3AgCl↓ + HAuCl4 + 3HNO3

Here, we can assume that each reactant has a mass of 25.33 g as we are told that equal masses of all reactants are taken. To find the limiting reactant, we can calculate the number of moles of each reactant present. We can then determine the number of moles of the product produced by the limiting reactant. This will give us the amount of gold salt produced.The molar mass of AgNO3 is given as 169.9 g/mol. Therefore, the number of moles of AgNO3 present is 0.149 mol (25.33/169.9). According to the balanced equation, one mole of AgNO3 produces one mole of Au salt. Therefore, the number of moles of Au salt produced is also 0.149 mol.The molar mass of AuCl3 is given as 303.3 g/mol. Therefore, the mass of Au salt produced is:Mass = molar mass × number of moles= 303.3 × 0.149 g= 45.19 g.Therefore, the mass of the gold salt produced is 45.19 g.

The mass of gold salt that forms when a 76.0-g mixture of equal masses of all three reactants is prepared is 45.19 g.

To learn more about balanced equation visit:

brainly.com/question/12192253

#SPJ11

The molecular formula C8H4N2 has 6 elements (option c) of unsaturation.

Elements of unsaturation, also known as double bond equivalents (DBEs), are used to determine the number of double bonds, triple bonds, or rings in a molecule.

The formula to calculate DBEs is:

DBE = (2C + 2 + N - H) / 2,

where

C is the number of carbon atoms,

N is the number of nitrogen atoms, and

H is the number of hydrogen atoms.

For the molecular formula C8H4N2, the calculation is:

DBE = (2 × 8 + 2 + 2 - 4) / 2 = (16 + 4) / 2 = 20 / 2 = 10.

However, since there are 2 nitrogen atoms, we need to subtract 2 from the total (1 for each nitrogen atom), resulting in 6 elements of unsaturation.

Thus, the correct choice is (c).

For more such questions on molecular, click on:

https://brainly.com/question/24191825

#SPJ11

B) Molecules with a molecular formula of C8H4N2 have 4 elements of unsaturation.

The formula for calculating the number of elements of unsaturation in an organic compound is:

Elements of unsaturation = (2 x number of carbons) + 2 - (number of hydrogens + number of nitrogens)/2

Plugging in the values for C8H4N2, we get:

Elements of unsaturation = (2 x 8) + 2 - (4 + 2)/2 = 16 + 2 - 3 = 15/2 = 7.5

However, since elements of unsaturation must be a whole number, we round 7.5 to the nearest whole number, which is 8/2 = 4. Therefore, molecules with a molecular formula of C8H4N2 have 4 elements of unsaturation.

learn more about Molecules here:

https://brainly.com/question/30465503

#SPJ11

The correct answer is: Faraday's constant is the charge of 1 mol of electrons.

Faraday's constant, denoted by the symbol F, is a fundamental physical constant in electrochemistry. It represents the charge of 1 mole of electrons, which is approximately equal to 96,485 coulombs per mole (C/mol).

This constant allows for the conversion between the quantity of electricity (in coulombs) and the number of moles of a substance involved in an electrochemical reaction. It is often used in calculations involving electrolysis, electrode processes, and the stoichiometry of redox reactions.

It is important to note that Faraday's constant is not related to the other descriptions mentioned. It is specifically associated with the amount of charge carried by 1 mole of electrons, rather than the potential difference, work, or theoretical/actual potential in an electrolytic cell.

To learn more about Faraday's constant, visit

brainly.com/question/31604460

#SPJ11

Vinyl bromide, also known as bromoethene or bromoethylene, has a chemical formula of C2H3Br.

It consists of two carbon atoms (C2) connected by a double bond (represented by a straight line), with one hydrogen atom (H) attached to each carbon atom. Additionally, one bromine atom (Br) is attached to one of the carbon atoms.

Here's a simplified text representation of the molecule:
```
 H   Br
  \ /
   C=C
   | |
   H H
```

The actual bond angles and molecular geometry may differ.

To learn more about molecules:

https://brainly.com/question/30694482

#SPJ11

The symbol of the element located in period 3 with the following Lewis dot structure would depend on the specific structure in question.

However, generally speaking, elements in period 3 of the periodic table include sodium (Na), magnesium (Mg), aluminum (Al), silicon (Si), phosphorus (P), sulfur (S), chlorine (Cl), and argon (Ar). These elements have different Lewis dot structures based on their number of valence electrons and electron configuration. For example, sodium has one valence electron and would have a Lewis dot structure of Na: •. Silicon has four valence electrons and would have a Lewis dot structure of Si: ••••. Knowing the number of valence electrons and the electron configuration can help determine the Lewis dot structure and ultimately, the symbol of the element in question.

To know more about Lewis dot structure visit:

https://brainly.com/question/28652824

#SPJ11

To compute the reaction at the pin O just after the cord AB is cut, we need to consider the forces acting on the pendulum. The only forces acting on the system are the weight of the sphere and the rod, which act downwards, and the tension in the cord AB, which acts upwards.

When the cord is cut, the sphere will start to fall downwards due to gravity. This will create a reaction force at the pin O, which will prevent the entire pendulum from falling downwards. We can use Newton's third law of motion, which states that every action has an equal and opposite reaction, to determine the magnitude of this force.

Let F be the reaction force at the pin O. Then, we can write:

F = (30 lb + 10 lb)g

where g is the acceleration due to gravity, which is approximately 32.2 ft/s^2.

Note that we have added the weights of the sphere and the rod to find the total weight acting downwards. This is because the reaction force at the pin O must be equal in magnitude and opposite in direction to the total weight of the pendulum.

Substituting the values, we get:

F = (30 lb + 10 lb) x 32.2 ft/s^2
 = 1288 lb-ft/s^2

Therefore, the reaction at the pin O just after the cord AB is cut is 1288 lb-ft/s^2. Note that this is a force and not a distance, so the units are lb-ft/s^2.

Learn more about gravity here:

brainly.com/question/31321801

#SPJ11

True.

In a metal complex, metal ions have empty d orbitals that can accept a pair of electrons from a ligand, forming a coordinate covalent bond. This is a type of bonding in which both electrons of the bond come from the ligand.

The coordination number of the metal ion is determined by the number of ligands bonded to it through coordinate covalent bonds. The empty d orbitals of the metal ion can also form pi bonds with the ligands. The type of coordination and bonding depends on the nature of the ligand and the metal ion.

Learn more about electron here :

https://brainly.com/question/28977387

#SPJ11

The electron configuration for carbon is 1s² 2s² 2p², which indicates that it has two electrons in the 1s orbital, two electrons in the 2s orbital, and two electrons in the 2p orbital.

The Lewis valence electron diagram for carbon shows four valence electrons, represented by dots around the element symbol. The first two dots are placed on different sides of the symbol to represent the two electrons in the 2s orbital, while the remaining two dots are placed above and below the symbol to represent the two electrons in the 2p orbital. This arrangement of valence electrons is crucial in determining the chemical behavior of carbon, which is essential in many biological and industrial processes.

To know more about Lewis valence electron, here

brainly.com/question/24003492

#SPJ4

--The complete Question is, Use the electron arrangement interactive to practice building electron arrangements. Then, write the electron configuration and draw the Lewis valence electron diagram for carbon. --

Silver nanoparticles have different properties than a lump of silver because of their significantly smaller size and higher surface area-to-volume ratio.

In nanoparticles, the increased surface area results in a greater number of atoms on the surface, leading to changes in chemical reactivity, optical properties, and physical behavior. This unique surface area enables silver nanoparticles to interact more readily with their environment, making them more reactive than their larger counterparts.

Additionally, the properties of silver nanoparticles can be tuned by controlling their size, shape, and surface chemistry, making them attractive materials for a wide range of applications in areas such as catalysis, sensing, and biomedicine.

To know more about nanoparticles:

https://brainly.com/question/2940949

#SPJ1

           2Cr₃⁺(aq) + 3Sn₂⁺(aq) → 2Cr(s) + 3Sn(s),

To determine the overall balanced reaction and calculate the standard cell potential,

we need to consider the reduction potentials of both half-reactions and their stoichiometric coefficients.

      Cr₃⁺(aq) + 3 e⁻ → Cr(s) E° = -0.41 V

      Sn₂⁺(aq) + 2 e⁻ → Sn(s) E° = -0.14 V

       2 × (Cr₃⁺ (aq) + 3 e⁻ → Cr(s)) gives us:

          2Cr₃⁺(aq) + 6 e⁻ → 2Cr(s)

       3 × (Sn₂⁺(aq) + 2 e⁻ → Sn(s)) gives us:

            3Sn₂⁺(aq) + 6 e⁻ → 3Sn(s)

Now, we can combine these two half-reactions to form the overall balanced reaction:

      2Cr₃⁺(aq) + 6 e⁻ + 3Sn₂⁺(aq) + 6 e⁻ → 2Cr(s) + 3Sn(s)

Simplifying this equation, we get:

      2Cr₃⁺(aq) + 3Sn₂⁺(aq) → 2Cr(s) + 3Sn(s)

Now, let's calculate the standard cell potential (E°) for the reaction.

       E°(cell) = E°(cathode) - E°(anode)

           (Cr₃⁺(aq) + 3 e⁻ → Cr(s)) is -0.41 V,

           (Sn₂⁺(aq) + 2 e⁻ → Sn(s)) is -0.14 V,

we can substitute these values into the equation:

           E°(cell) = -0.14 V - (-0.41 V)

           E°(cell) = -0.14 V + 0.41 V

           E°(cell) = 0.27 V

           2Cr₃⁺(aq) + 3Sn₂⁺(aq) → 2Cr(s) + 3Sn(s)

Learn more about balanced reaction

brainly.com/question/14258973

#SPJ11

The balanced equation for the bromination of acetanilide to form p-bromoacetanilide is as follows:

C6H5NHCOCH3 + Br2 -> C6H4BrNHCOCH3 + HBr

This equation represents the reaction of acetanilide (C6H5NHCOCH3) with bromine (Br2) to produce p-bromoacetanilide (C6H4BrNHCOCH3) and hydrogen bromide (HBr) as a byproduct.

Mechanism for the Halogenation of Acetanilide:

The bromination of acetanilide follows an electrophilic aromatic substitution mechanism. Here is a simplified overview of the mechanism:

Step 1: Generation of the Electrophile

Bromine (Br2) reacts with a Lewis acid catalyst, such as iron (III) bromide (FeBr3), to form an electrophilic species, known as the bromonium ion (Br+). The iron (III) bromide catalyst helps facilitate the reaction by accepting a lone pair of electrons from bromine, forming FeBr4-.

Step 2: Attack of the Aromatic Ring

The electron-rich aromatic ring of acetanilide undergoes nucleophilic attack by the bromonium ion. One of the carbon atoms in the bromonium ion bonds with the ortho or para position of the aromatic ring.

Step 3: Rearrangement (Ring Opening)

The attack of the aromatic ring by the bromonium ion causes a rearrangement of the bonds, leading to the opening of the bromonium ion and the formation of a carbocation intermediate. The bromine is now attached to the ortho or para position of the aromatic ring.

Step 4: Deprotonation

A base (such as water or the conjugate base of the catalyst) deprotonates the carbocation intermediate, resulting in the formation of p-bromoacetanilide and regenerating the catalyst.

Overall, the bromination of acetanilide involves the substitution of one of the hydrogen atoms on the aromatic ring with a bromine atom, resulting in the formation of p-bromoacetanilide.

To know more about bromoacetanilide refer here

https://brainly.com/question/31424387#

#SPJ11

At 238 K temperature will 41.6 grams N, exerts a pressure of 815 torr in a 20.0 L cylinder . Option C. is correct .

To solve this problem, we can use the Ideal Gas Law equation:

PV = nRT

where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.

First, we need to convert the pressure from torr to atmospheres:

815 torr = 1.07 atm

Next, we can calculate the number of moles of N using its molar mass:

[tex]N_2[/tex] molar mass = 28.02 g/mol

41.6 g [tex]N_2[/tex] = 1.49 mol N2

Now we can rearrange the Ideal Gas Law equation to solve for T:

T = PV / nR

T = (1.07 atm)(20.0 L) / (1.49 mol)(0.0821 L atm/mol K)

T = 238 K

Therefore, the answer is (c) 238 K.

To know more about Pressure refer here :

https://brainly.com/question/24719118

#SPJ11

The sample of calcium containing 5.42 x [tex]10^{20}[/tex] particles corresponds to approximately 0.036 grams.

To determine the mass of the calcium sample, we need to convert the given number of particles to moles and then to grams using the molar mass of calcium. First, we convert the n The sample of calcium containing 5.42 x 10^{20} particles corresponds to approximately 0.018 grams.

To determine the mass of the sample, we need to use Avogadro's number (6.022 x 10^{23}) and the molar mass of calcium (40.08 g/mol). First, we calculate the number of moles in the sample by dividing the number of particles by Avogadro's number: Number of moles = (5.42 x 10^{20}particles) / (6.022 x 10^{23}particles/mol) ≈ 8.993 x 10^{-4}mol

Next, we use the molar mass of calcium to convert moles to grams:

Mass = Number of moles x Molar mass

= (8.993 x 10^{-4}mol) x (40.08 g/mol)

≈ 0.036 grams

Therefore, the sample of calcium containing 5.42 x[tex]10^{20}[/tex] particles weighs approximately 0.036 grams. This corresponds to option (a) in the provided choices.

Learn more about  moles here: https://brainly.com/question/29367909

#SPJ11

An experiment requires 24.5 g of ethyl alcohol , volume of ethyl alcohol in 3.10 × 10–2 L is required.

To calculate the volume of ethyl alcohol required, we need to use the formula:
Density = mass/volume
Rearranging this formula to solve for volume, we get:
Volume = mass/density
Substituting the given values, we get:
Volume = 24.5 g / 0.790 g/mL
Simplifying this, we get:
Volume = 31.0 mL
But the question asks for the answer in liters, so we need to convert mL to L by dividing by 1000:
Volume = 31.0 mL / 1000 mL/L
Simplifying this, we get:
Volume = 3.10 × 10–2 L
Therefore, the answer is option (b), 3.10 × 10–2 L.
To calculate the volume of ethyl alcohol required for the experiment, we need to use the density of ethyl alcohol. Density is the mass of a substance per unit volume. In this case, the density of ethyl alcohol is given as 0.790 g/mL. This means that 1 mL of ethyl alcohol weighs 0.790 g. To find out how much volume of ethyl alcohol we need for the experiment, we can use the formula: Volume = mass/density. The mass required for the experiment is given as 24.5 g. Substituting this value and the density of ethyl alcohol in the formula, we get the volume of ethyl alcohol required as 31.0 mL. However, the answer options are given in liters, so we need to convert mL to L by dividing by 1000. Therefore, the volume of ethyl alcohol required for the experiment is 3.10 × 10–2 L.

To know more about ethyl alcohol visit:

brainly.com/question/29153788

#SPJ11

the answer is (d) 1.5 mol.

Under standard conditions, which are defined as 1 atmosphere (101.325 kPa) and 0°C (273.15 K), the molar volume of an ideal gas is 22.4 L.

Therefore, if a diatomic ideal gas occupies 33.6 L under standard conditions, the number of moles of gas in the sample can be calculated as follows:

n = V / Vm

where n is the number of moles, V is the volume of the gas, and Vm is the molar volume of the gas at standard conditions.

Substituting the given values, we get:

n = 33.6 L / 22.4 L/mol = 1.5 mol

To know more about conditions refer here

https://brainly.com/question/29418564#

#SPJ11

FeSO4 is a salt that dissociates in water into its constituent ions Fe2+ and SO42-. The dissociation equation for FeSO4 can be written as follows FeSO4 (s) → Fe2+ (aq) + SO42- (aq).

The term "constituent" can have different meanings depending on the context. Here are some of its common uses In politics, a constituent refers to a person or group of people who live in a particular area represented by an elected official. For example, the constituents of a member of Congress would be the people who live in the district that the member represents.In chemistry, a constituent refers to a substance that is part of a mixture or compound. For example, the constituents of air are nitrogen, oxygen, and other gases.

To know more about constituents visit :

https://brainly.com/question/14101794

#SPJ11

The fraction of space that Xe atoms occupy in a sample of xenon at STP is approximately 1.1 × 10⁻⁵.

To calculate the fraction of space that Xe atoms occupy in a sample of xenon at STP, we need to first calculate the volume occupied by one Xe atom.

The formula for the volume of a sphere is V = 4/3 * π * r³, where r is the radius. So, the volume of one Xe atom is:

V = 4/3 * π * (1.3 Å)³

V ≈ 12.6 ų

Avogadro's number, which represents the number of atoms in one mole of a substance, is approximately 6.02 × 10²³ atoms per mole.

At STP (standard temperature and pressure), the molar volume of any gas is 22.4 liters/mole.

To calculate the fraction of space that Xe atoms occupy, we can use the following formula:

Fraction of space = (Volume of 1 Xe atom x Avogadro's number) / (Molar volume x Avogadro's number)

Fraction of space = (12.6 ų * 6.02 × 10²³) / (22.4 L/mol * 6.02 × 10²³)

Fraction of space ≈ 1.1 × 10⁻⁵

Therefore, the fraction of space that Xe atoms occupy in a sample of xenon at STP is approximately 1.1 × 10⁻⁵.

Learn more about fraction of space

brainly.com/question/14836274

#SPJ11

The balanced chemical equation for the reaction between sodium (Na) and water (H2O) is:

2Na + 2H2O → 2NaOH + H2

This means that for every 2 moles of sodium added, 1 mole of hydrogen gas (H2) is produced. Therefore, to calculate the number of moles of H2 produced, we need to first determine the number of moles of sodium added and then use the mole ratio from the balanced equation.

In this case, we are given that 4.0 moles of Na is added and 1.2 moles of H2O is present. Since Na and H2O react in a 1:2 ratio, we can determine the number of moles of NaOH produced by dividing the number of moles of H2O by 2:

1.2 mol H2O ÷ 2 = 0.6 mol NaOH

Since 2 moles of Na produce 1 mole of H2, we can use a mole ratio to calculate the number of moles of H2 produced:

4.0 mol Na × (1 mol H2 / 2 mol Na) =2.0 mol H2

Therefore, 2.0 moles of H2 will be produced when 4.0 mol Na is added to 1.2 mol H2O.
When 4.0 mol of Na reacts with 1.2 mol of H2O, the balanced chemical equation is:

2 Na + 2 H2O → 2 NaOH + H2

From the balanced equation, you can see that 2 moles of Na reacts with 2 moles of H2O to produce 1 mole of H2. To find the number of moles of H2 produced, first determine the limiting reactant:

Na: 4.0 mol / 2 = 2.0 (sets of reactants)
H2O: 1.2 mol / 2 = 0.6 (sets of reactants)

H2O is the limiting reactant. Now calculate the moles of H2 produced:

0.6 (sets of reactants) × 1 mol H2 = 0.6 mol H2

So, 0.6 moles of H2 will be produced when 4.0 mol of Na is added to 1.2 mol of H2O.

To know more about balanced chemical equation visit:

https://brainly.com/question/28294176

#SPJ11

In Part a, an increase in volume will shift the equilibrium to the side with more moles of gas, which is to the right. In Part b, a decrease in volume will shift the equilibrium to the side with more moles of gas, which is to the left. In Part c, a decrease in volume will shift the equilibrium to the side with fewer moles of gas, which is to the right.

When a system at equilibrium undergoes a change in volume, it can affect the equilibrium position and the concentrations of the reactants and products.

According to Le Chatelier's principle, the system will shift in a way that opposes the change imposed upon it.

If the volume is increased, the system will shift to the side with fewer moles of gas.

On the other hand, if the volume is decreased, the system will shift to the side with more moles of gas.

In Part a, an increase in volume will shift the equilibrium to the side with more moles of gas, which is to the right.

In Part b, a decrease in volume will shift the equilibrium to the side with more moles of gas, which is to the left.

In Part c, a decrease in volume will shift the equilibrium to the side with fewer moles of gas, which is to the right.

Learn more about moles at: https://brainly.com/question/23991631

#SPJ11

The reducing agent in this case has a central atom with a 0 formal charge. This means that the central atom has the same number of electrons as it would in a neutral state.

A reducing agent is a substance that donates electrons to another substance in a chemical reaction. In other words, it is a substance that is oxidized (loses electrons) in order to reduce (gain electrons) another substance.

Now, onto the formal charges of the central atoms in each of the reducing agents:

a. +1

The formal charge of an atom is the difference between the number of valence electrons in an isolated atom and the number of electrons assigned to that atom in a Lewis structure. In this case, the reducing agent has a central atom with a +1 formal charge. This means that the central atom has one fewer electron than it would in a neutral state.

b. -2

Similarly, the reducing agent in this case has a central atom with a -2 formal charge. This means that the central atom has two more electrons than it would in a neutral state.

c. -1

The reducing agent in this case has a central atom with a -1 formal charge. This means that the central atom has one more electron than it would in a neutral state.

d. 0

Finally, the reducing agent in this case has a central atom with a 0 formal charge. This means that the central atom has the same number of electrons as it would in a neutral state.

To know more about formal charge here

https://brainly.com/question/29362180

#SPJ4

The volume of 0.385 M potassium permanganate that contains 0.49 grams of solute is 8.06 mL. To determine this, the given mass of solute is divided by the molar mass to get the number of moles and then the molarity formula is used to find the volume.

To solve this problem, we can use the formula:

moles of solute = mass of solute / molar mass of solute

We can calculate the number of moles of potassium permanganate using the given mass of solute and its molar mass:

moles of solute = 0.49 g / 158 g/mol = 0.003101 mol

Next, we can use the molarity formula to find the volume of the solution containing this amount of solute:

Molarity = moles of solute / volume of solution (in liters)

Rearranging the formula gives:

volume of solution = moles of solute / Molarity

Since the molarity of the potassium permanganate solution is 0.385 M, we can substitute the values and get:

volume of solution = 0.003101 mol / 0.385 mol/L = 0.00806 L

Converting this to milliliters by multiplying by 1000, we get:

volume of solution = 0.00806 L x 1000 mL/L = 8.06 mL

Therefore, 8.06 mL of 0.385 M potassium permanganate solution contains 0.49 grams of the solute.

To know more about the potassium permanganate refer here :

https://brainly.com/question/31384813#

#SPJ11

LDA (Lithium Diisopropylamide) is a better base than butyllithium for the deprotonation of a ketone because it is a more selective and less reactive base.

LDA's bulky structure reduces the chance of unwanted side reactions, such as nucleophilic attack on the carbonyl group.

This selectivity allows for the controlled formation of an enolate ion, which can participate in various organic reactions.

On the other hand, butyllithium is a strong and more reactive base that can lead to multiple unwanted reactions and less control over the deprotonation process. Thus, LDA is preferred for the deprotonation of ketones.

Learn more about LDA at

https://brainly.com/question/14868852

#SPJ1