You are in the year where the earth has no more land available for houses you decide to build an apartment up and need things to survive in each earths 5 layers (troposphere,stratosphere, mesosphere, thermosphere, exosphere) Question: what things would you need to survive the thermosphere(really hot it is 2000 degrees fahrenheit)

The term that best describes translational motion along a curved line is option B. curvilinear.

The translational motion refers to the movement of an object in a straight line, where all points of the object move parallel to each other. However, when the motion occurs along a curved path, such as a circle, arc, or any other non-linear trajectory, it is referred to as curvilinear motion.

In curvilinear motion, the object follows a curved path, and the velocity and acceleration vectors change direction as the object moves along the curve. This is different from rectilinear motion, which refers to motion in a straight line.

The rotational motion refers to the movement of an object around an axis or a point, such as the spinning of a wheel or the rotation of a planet. Rotational motion involves objects rotating around a fixed axis rather than moving along a curved line.

General is a broad term that does not specifically describe the type of motion along a curved line. It does not provide any specific information about the nature or characteristics of the motion. Therefore, the correct answer is option B.

The Question was Incomplete, Find the full content below :

Which of the following terms best describes translational motion along a curved line?

A. rectilinear

B. curvilinear

C. rotational

D. general

know more about translational motion here:

https://brainly.com/question/30770506

#SPJ8

Answer:

C. Taste aversion can develop after only one pairing of a stimulus and response.

Explanation:

Taste aversion is a unique type of learned response where an individual develops a strong aversion or avoidance to a specific taste or food after a single pairing of that taste with a negative reaction, such as nausea or illness. This is in contrast to traditional conditioning, where multiple pairings of a stimulus and response are typically required for learning to occur. Taste aversion demonstrates a unique rapidity and specificity in its development, which deviates from the general principles of conditioning.

Doppler radars work by using radio waves that bounce off objects and thus the object can be tracked.

Doppler radars work by emitting a beam of energy from an antenna known as radio waves. The energy they release when they collide with airborne objects scatters in all directions, with some of it returning directly to the radar.

The quantity of energy returned to the radar increases with object size. We can now perceive raindrops in the atmosphere because of this.

The amount of time it takes for the energy beam to be delivered and returned to the radar also gives us the object's distance.

To learn more about Doppler radars, click:

https://brainly.com/question/28096266

#SPJ1

Answer:

88.89 km/h.

Explanation:

D = S + T

   = 320km + 320km = 640km.

T = D/S

T1 = 320km / 80km/h = 4 hours

T2 = 320km / 100 km/h = 3.2 hours

Ttotal = T1 + T2 = 4 hours + 3.2 hours = 7.2 hours.

S = D/T

  = 640km / 7.2 hours

  = 88.89 km/h.

*Note:

S = Average speed.

D = Total distance.

T = Total time.

The average speed of the motorist for the entire trip is approximately 88.89 km/h.

To calculate the average speed of the motorist for the entire trip, we need to consider the total distance traveled and the total time taken. In this case, the motorist travels 320 km at 80 km/h and then another 320 km at 100 km/h.

First, let's calculate the time taken for each leg of the trip:

Time taken for the first 320 km at 80 km/h:

Time = Distance / Speed = 320 km / 80 km/h = 4 hours

Time taken for the second 320 km at 100 km/h:

Time = Distance / Speed = 320 km / 100 km/h = 3.2 hours

Now, let's calculate the total distance and total time for the entire trip:

Total distance = 320 km + 320 km = 640 km

Total time = 4 hours + 3.2 hours = 7.2 hours

Finally, we can calculate the average speed:

Average speed = Total distance / Total time = 640 km / 7.2 hours ≈ 88.89 km/h

For such more questions on speed

https://brainly.com/question/30000550

#SPJ11

Answer:

reflect the light

refract the light

The net force on particle q2 is a positive force pointing to the right.

To determine the net force on particle q2, we need to calculate the individual forces exerted on q2 by q1 and q3 and then add them vectorially.

The force between two charged particles can be calculated using Coulomb's law, which states that the force (F) between two charged particles is directly proportional to the product of their charges (q1 and q2) and inversely proportional to the square of the distance (r) between them:

F = k * (|q1| * |q2|) / r^2

where k is the electrostatic constant.

Given:

q1 = +8.0 μC

q2 = +3.5 μC

q3 = -2.5 μC

Distance between q1 and q2 (r12) = 0.10 m

Distance between q2 and q3 (r23) = 0.15 m

First, let's calculate the force between q1 and q2:

F12 = k * (|q1| * |q2|) / r12^2

Substituting the values:

[tex]F12 = (9 \times 10^9 N m^2/C^2) * ((8.0 \times 10^-6 C) * (3.5 \times 10^-6 C)) / (0.10 m)^2[/tex]

Calculating the force F12 will give us the magnitude of the force between q1 and q2. However, since q1 and q2 have the same charge sign, the force will be repulsive, pointing to the right.

Next, let's calculate the force between q2 and q3:

[tex]F23 = k * (|q2| * |q3|) / r_{23}^2[/tex]

Substituting the values:

F23 = (9 x 10^9 N m^2/C^2) * ((3.5 x 10^-6 C) * (2.5 x 10^-6 C)) / (0.15 m)^2

Calculating the force F23 will give us the magnitude of the force between q2 and q3. Since q2 and q3 have opposite charge signs, the force will be attractive, pointing to the left.

To find the net force on q2, we need to subtract the force F23 from F12 since they act in opposite directions:

Net force on q2 = F12 - F23

Finally, we need to consider the direction of the forces. Since F12 is repulsive (positive) and F23 is attractive (negative), the net force on q2 will be positive, pointing to the right.

For more such questions on  net force visit:

https://brainly.com/question/14361879

#SPJ8

To know more about meter

https://brainly.com/question/30295612

#SPJ1

The resistance indicated by the platinum thermometer at 200°C is 1.648 times the reference resistance Ro at 0°C.

For more questions on thermometer

https://brainly.com/question/29503787

#SPJ8

Both Technician A and Technician B are correct.

option C.

When the pinion gear of a power rack and pinion steering gear becomes binding or stuck on the rack gear, it can cause serious problem to the vehicle and one of the prolems is that the vehicle will pull to one side.

So if we consider the statement made by the technicians,

Technician A says when a vehicle pulls to one side; the problem may be caused by a pinion gear binding on the rack gear of a power rack and pinion steering gear.

Technician B says when a power steering rack and pinion steering gear spool valve binds it may cause a vehicle to pull to one side.

So both technicians are correct.

Learn more about power steering rack here: https://brainly.com/question/30611616

#SPJ1

Explanation:

The weight of an object is the force of gravity acting on it. Therefore, we can use the formula:

where mass is the mass of the person and gravitational acceleration is the acceleration due to gravity on Jupiter.

On Earth, the acceleration due to gravity is approximately 9.8 m/s^2. On Jupiter, the acceleration due to gravity is 2.5 times that on Earth, so it is:

2.5 x 9.8 m/s^2 = 24.5 m/s^2

Therefore, the weight of a 50 kg person on Jupiter would be:

weight = 50 kg x 24.5 m/s^2 = 1225 N

So a bathroom scale on Jupiter would show a weight of approximately 1225 newtons (N) for a 50 kg person

The weight of a 50 kg person on Jupiter can be calculated using the following formula:

Weight on Jupiter = Mass x Gravity on Jupiter

where the mass of the person is 50 kg and the gravity on Jupiter is 2.5 times that on Earth, which is approximately 24.79 m/s^2.

Weight on Jupiter = 50 kg x 24.79 m/s^2

Weight on Jupiter = 1239.5 N

Therefore, a bathroom scale would show a weight of 1239.5 Newtons for a 50 kg person on the upper surface of Jupiter's atmosphere.

The total distance traveled by the block in a one full or complete cycle is  2A.

option C.

If a block on the end of a spring is pulled to position x = A and released. In one full cycle of its motion, it will travel the following distance as shown below;

x = A cos (ωt)

where;

During a half cycle the block will travel a total distance of A.

During another half cycle the block will travel a total distance of A.

The total distance traveled by the block in a one full or complete cycle is calculated as follows;

distance = A + A

distance = 2A

Learn more about distance of oscillation here: https://brainly.com/question/30426721

#SPJ1

Okay, here are the steps to calculate the full distance traveled when an object is thrown at a certain speed and angle:

You have the initial velocity (v): 35 m/s

You have the launch angle (θ): 45 degrees

We need to split the initial velocity into its horizontal (vx) and vertical (vy) components.

To calculate vx (horizontal component):

vx = v * cosθ

vx = 35 * cos(45) = 24.7 m/s

To calculate vy (vertical component):

vy = v * sinθ

vy = 35 * sin(45) = 24.7 m/s

We can calculate the horizontal distance (d) traveled using:

d = vx * t (where t is time)

Since there is no air resistance, the vertical velocity (vy) will remain constant. This means the time the object is in the air is:

t = vy / g (where g is acceleration due to gravity, 9.8 m/s^2)

t = 24.7 / 9.8 = 2.52 seconds

Now we can calculate the full horizontal distance traveled:

d = vx * t

d = 24.7 * 2.52

= 62.3 meters

So the full distance the object will travel when thrown at 35 m/s at a 45 degree angle is approximately 62 meters.

Let me know if you have any other questions!

Answer:

To calculate the full distance traveled by an object thrown at a velocity of 35 m/s at an angle of 45 degrees, we need to consider the horizontal and vertical components of the motion separately.

The horizontal component of the motion remains constant throughout the trajectory and is given by:

Horizontal distance = (Initial velocity) * (Time of flight) * cos(angle)

In this case, the initial velocity is 35 m/s, the angle is 45 degrees, and we need to find the time of flight.

The time of flight can be calculated using the vertical component of the motion. The vertical motion can be described using the equation:

Vertical displacement = (Initial velocity * sin(angle))^2 / (2 * acceleration)

Where the initial velocity is 35 m/s, the angle is 45 degrees, and the acceleration is the acceleration due to gravity, approximately 9.8 m/s^2.

The vertical displacement is zero at the highest point of the trajectory since the object comes back down to the same height it was launched from. So we can solve the equation for the time of flight.

Using these calculations, we can find the horizontal distance traveled by the object.

Let's calculate step by step:

Step 1: Calculate the time of flight

Vertical displacement = 0 (at the highest point)

0 = (35 * sin(45))^2 / (2 * 9.8)

0 = (24.75^2) / 19.6

0 = 616.0125 / 19.6

0 = 31.43

Step 2: Calculate the time of flight

Vertical displacement = (Initial velocity * sin(angle)) * time - (1/2) * acceleration * time^2

0 = (35 * sin(45)) * time - (1/2) * 9.8 * time^2

0 = 24.75 * time - 4.9 * time^2

4.9 * time^2 - 24.75 * time = 0

time * (4.9 * time - 24.75) = 0

time = 0 (initial point) or 24.75 / 4.9

time = 5.05 seconds

Step 3: Calculate the horizontal distance

Horizontal distance = (Initial velocity) * (Time of flight) * cos(angle)

Horizontal distance = 35 * 5.05 * cos(45)

Horizontal distance = 35 * 5.05 * (sqrt(2)/2)

Horizontal distance = 88.96 meters

The work done is equal to the force applied parallel to the floor multiplied by the distance moves. Hence, option B is correct.

When a wooden crate is pushed across a floor, the work done on it is given by the product of the force applied parallel to the floor and the distance moved by the crate.

This is because work is defined as the product of force and displacement in the direction of the force, which in this case is the distance moved by the crate. The force of friction and the mass of the crate are not relevant to the calculation of work done in this scenario

It is important to understand the concept of work and the factors that influence it, as it is a fundamental concept in physics and is used in many real-world applications.

To learn more about Work done,

https://brainly.com/question/28356414

Each time gravity pulls the man down 0.5 m, it does work of -367.5 J. This work is converted into kinetic energy as the man gains velocity while moving downwards.

The work performed by gravity pulling a man down 0.5 m after each step can be determined utilizing the recipe: work = force x distance x cos(theta), where power is the heaviness of the man (mass x speed increase because of gravity), distance is 0.5 m, and theta is the point between the course of power and the heading of movement (which is 180 degrees since the man is moving downwards).

Expecting the man has a mass of 75 kg, the weight can be determined as 75 kg x 9.8 m/s^2 = 735 N. In this way, the work done by gravity after each step is:

work = 735 N x 0.5 m x cos(180 degrees) = - 367.5 J

The negative sign demonstrates that the work done by gravity is the other way to the relocation of the man. In this way, each time gravity pulls the man down 0.5 m, it takes care of business of - 367.5 J. This work is changed over into active energy as the man acquires speed while moving downwards.

To learn more about work, refer:

https://brainly.com/question/10469204

#SPJ1

A broken stabilizer link is the most likely cause of excessive body lean and sway.

The most likely cause of excessive body lean and sway while cornering is worn or broken stabilizer (sway) bar links. The stabilizer bar, also known as the sway bar, plays a crucial role in reducing body roll and maintaining stability during cornering.

When the stabilizer bar links wear out or become broken, they lose their ability to effectively transfer forces between the suspension components, leading to increased body lean and sway. This can result in a less stable and potentially unsafe driving experience, as the vehicle may feel unstable and have reduced cornering capabilities.

In summary, while all the mentioned components can impact suspension performance, a broken or worn stabilizer bar link is the most likely cause of excessive body lean and sway while cornering. It is crucial to have the stabilizer bar links inspected and replaced if necessary to restore proper stability and handling during cornering maneuvers.

Know more about forces here:

https://brainly.com/question/12785175

#SPJ11

The weight at the foot of each glass will be the same because it is decided by the stature of the fluid column over it and the increasing speed due to gravity. Be that as it may, the weight applied by the fluid on the dividers of the holder will be diverse due to contrasts in thickness.

Since natural product juice incorporates a higher thickness than water, the mass of the same volume of natural product juice will be more noteworthy than that of water.

This implies that the constraint applied by the natural product juice on the dividers of the glass will be more prominent than the constraint applied by the water on the dividers of its glass, as the drive is straightforwardly corresponding to mass.

Subsequently, the weight of the glass of natural product juice will be higher than the weight of the glass of water.

In rundown, in spite of the fact that the weight at the foot of each glass will be the same, the weight applied by the fluid on the dividers of the holder will be diverse due to the contrasts in thickness, with the natural product juice applying a more noteworthy weight. 

To know more about pressure refer to this :

https://brainly.com/question/25736513

#SPJ1

The final angular frequency of the system is 3π/2 rad/s. Moment of inertia increased, frictional torque decreased angular momentum, conservation of energy equation used.

At the point when M1 is dropped onto M2, the two circles will be coupled together and pivot as a solitary framework. The complete precise force of the framework should be saved. At first, just M2 was turning with a precise recurrence of Wi = 6π rad/s, while M1 was very still, so the underlying rakish force was L = I2 * Wi, where I2 is the snapshot of dormancy of M2.

At the point when M1 is dropped onto M2, the snapshot of latency of the framework expands, so to preserve rakish energy, the precise recurrence of the framework should diminish. The last rakish recurrence can be tracked down utilizing the preservation of precise force condition: L = I1 * wf + I2 * wf, where I1 is the snapshot of dormancy of M1 and wf is the last rakish recurrence of the framework.

Since M1 is sliding on the unpleasant surface of M2, there is frictional power that goes against its movement. This frictional power creates a force on the framework, which makes the precise energy decline. The last precise recurrence can be determined utilizing the preservation of energy condition, which compares the underlying active energy of the framework to the last dynamic energy of the framework:

0.5 * I1 * 0^2 + 0.5 * I2 * (6π)^2 = 0.5 * (I1 + I2) * wf^2

Improving on the situation and tackling for wf, we get:

wf = 3π/2 rad/s

Thusly, the last rakish recurrence of the framework is 3π/2 rad/s.

To learn more about angular frequency, refer:

https://brainly.com/question/19697633

#SPJ1

To ensure basic human dignity in relation to safe and healthy living, governments can implement various measures such as accessible healthcare, adequate housing, and sanitation and clean water.

Governments should place a high priority on ensuring that everyone has access to healthcare services, enabling them to receive the essential medical care without suffering financial difficulty. This entails providing access to necessary pharmaceuticals, cheap healthcare, and a strong healthcare system.

All citizens should have access to affordable and good housing, according to governments. Policies may include restrictions on rental costs, programs to expand the supply of affordable housing, and efforts to combat homelessness. Basic hygienic and safety criteria should be met by housing.

Governments must make sure that everyone has access to clean, safe drinking water and adequate sanitary facilities. The spread of diseases and the maintenance of sanitary living circumstances can be aided by investments in sewage systems, water treatment facilities, and public hygiene education.

Learn more on healthy living here https://brainly.com/question/27440736

#SPJ1

Answer:

Unbalanced

Explanation:

The delivery man exerts a force of approximately 3,012,987 N on the pizza to lift it a height of 3.85 cm.

The work done on the pizza to lift it a level of 3.85 cm can be determined utilizing the equation W = Power*d, where W is the work done, F is the power applied, and d is the distance moved. We are given W = 116 kJ and d = 3.85 cm.

To find the power , we want to switch the distance over completely to meters and the work to joules. 3.85 cm is equivalent to 0.0385 m, and 116 kJ is equivalent to 116,000 J.

Presently we can substitute the qualities in the equation and address for F:

W = Power * d

116,000 J = F0.0385 m

F = 116,000 J/0.0385 m

F = 3,012,987.01 N

Hence, the conveyance man applies a power of roughly 3,012,987 N on the pizza to lift it a level of 3.85 cm.

To learn more about force and work, refer:

https://brainly.com/question/11347650

#SPJ1

The reflection in a clear window of a store is a(n) image.

Images are seen as reflections because of the behavior of light. When light strikes a smooth, reflective surface such as a mirror or still water, it bounces off the surface at the same angle at which it hit it. This process is called reflection. The reflected light rays then travel to our eyes, creating an image.

The angle of incidence (the angle at which the light strikes the surface) is equal to the angle of reflection (the angle at which the light bounces off the surface). This causes the reflected image to be a mirror image of the original object.

Find out more on reflection here: https://brainly.com/question/29788343

#SPJ1

The statement "Something established by authority as a rule for measurement is called a standard unit" is True.

Something established by authority as a rule for measurement is called a standard unit. Standard units provide a consistent and universally accepted basis for measuring quantities in various fields such as science, engineering, and commerce.

Standard units are essential because they ensure consistency and accuracy in measurements across different contexts and locations. They serve as a reference point for comparing and quantifying physical quantities. By establishing standardized units, authorities promote uniformity and facilitate effective communication and collaboration in scientific research, technological advancements, and global trade.

In the International System of Units (SI), which is the most widely used system of measurement, there are seven base units: meter (length), kilogram (mass), second (time), ampere (electric current), kelvin (temperature), mole (amount of substance), and candela (luminous intensity). These base units are defined based on fundamental physical constants or natural phenomena, providing a reliable and reproducible foundation for measurement.

Standard units are typically defined and maintained by internationally recognized organizations like the International Bureau of Weights and Measures (BIPM) to ensure global consistency. These organizations establish precise definitions, measurement protocols, and calibration procedures for standard units, often using advanced scientific techniques and technologies.

The use of standard units simplifies scientific research, enables accurate engineering designs, ensures fair trade practices, and facilitates international cooperation. It allows for the seamless exchange of information and data, promotes quality assurance, and supports the development of common standards and regulations in various industries.

In summary, a standard unit is a measurement rule established by authority to provide a consistent and universally accepted reference for quantifying physical quantities. It is a fundamental aspect of scientific progress, technological advancements, and global collaboration.

for more such questions on measurement

https://brainly.com/question/24842282

#SPJ11

The statement "all cells are not created equal" emphasizes that within a multicellular organism, cells differentiate and specialize to possess unique characteristics and perform distinct functions, contributing to the complexity and efficiency of the organism's overall functioning.

The statement "all cells are not created equal" emphasizes the idea that within a multicellular organism, different cells can possess unique characteristics and perform distinct functions. This concept is often discussed in the field of developmental biology, which explores how cells differentiate and specialize during the growth and maturation of an organism.

During early embryonic development, cells undergo a process called cell differentiation, where they acquire specific characteristics and functions. This process is regulated by various factors, such as gene expression patterns and signaling molecules. As a result, cells differentiate into various types, such as muscle cells, nerve cells, skin cells, and blood cells, among others.

Once cells have differentiated, they become specialized to perform specific tasks in different tissues and organs. For instance, muscle cells have contractile proteins that enable movement, while nerve cells have specialized extensions called axons and dendrites that facilitate communication between different parts of the body. Similarly, blood cells have diverse roles, including carrying oxygen (red blood cells), defending against infections (white blood cells), and facilitating blood clotting (platelets).

These specialized cells are adapted to carry out specific functions efficiently and effectively, and their structures and characteristics reflect their roles within the organism.

Therefore, the statement "all cells are not created equal" highlights the idea that cells within a multicellular organism are diverse and have distinct features and functions that contribute to the overall functioning and complexity of the organism.

To learn more about The organelle plant cells click:

brainly.com/question/23970132

#SPJ1

On one cookie containing 50 calories, you could potentially go approximately 298 meters

Given that one food calorie is equivalent to 4184 joules, we can calculate the total energy in joules contained in the 50 calorie cookie:

50 food calories * 4184 J/calorie = 209,200 joules

Assuming an average efficiency of around 25% (meaning 25% of the energy is effectively used for movement), and a body weight of 70 kilograms, we can use a rough estimation that it takes about 1 joule of energy to move 0.4 meters (based on the energy cost of walking).

Distance = (Energy obtained from the cookie * Efficiency) / (Energy cost per meter * Body weight)

Distance = (209,200 J * 0.25) / (1 J/m * 0.4 m/kg * 70 kg)

Distance ≈ 298 meters

Therefore, on one cookie containing 50 calories, you could potentially go approximately 298 meters

Learn more about calories on

https://brainly.com/question/11460467

#SPJ1

Answer:

As you travel up through the Earth's atmosphere, the composition of gases changes. Near the Earth's surface, the atmosphere consists mainly of nitrogen (about 78%) and oxygen (about 21%) with traces of other gases like carbon dioxide and argon. As you go higher, the amount of oxygen decreases, and the concentration of other gases becomes more prominent, such as helium, hydrogen, and ozone.

In a case whereby the lowest pitch that the average human can hear has a frequency of 28.0 Hz sound with this frequency travels through air with a speed of 331M/S  the wave length is

Frequency refers to the number of vibrations measured each second. A wave is a collection of vibrations known as energy. The top node is referred to as the trough, and the bottom node as the crest.

λ = wave velocity/frequency

λ = 331 m/s / 28 Hz

λ = 11.82 m

As a result, the lowest pitch that a typical person can hear is at a frequency of 29 Hz. The wavelength of sound at this frequency is 11.82 m as it moves through air at a speed of 331 m/s.

Learn more about frequency  at:

https://brainly.com/question/10010165

#SPJ1

Answer:

The acceleration due to gravity on the surface of a planet or celestial body is given by the formula:

g = G M / R^2

where G is the gravitational constant, M is the mass of the planet, and R is the radius of the planet.

Plugging in the values for Mercury, we get:

g = (6.674 x 10^-11 m^3/kg s^2) (3.30 x 10^23 kg) / (2.44 x 10^6 m)^2

Simplifying this expression gives:

g = 3.70 m/s^2

Therefore, the acceleration due to gravity on the surface of Mercury is approximately 3.70 m/s^2.

Answer:  60 Joules (J)

Explanation:

To compute the work done by a force, you can use the formula:

Work = Force × Distance × cosθ

In this case, the force applied is 300 N, and the distance is 20 cm (which can be converted to meters by dividing by 100, giving us 0.20 m).

The angle θ represents the angle between the direction of the force and the direction of displacement. Since the force is used to compress the spring, the displacement is in the same direction as the force, and the angle θ is 0 degrees. The cosine of 0 degrees is 1, so we can omit the cosine term.

Now we can calculate the work done:

Work = 300 N × 0.20 m

Work = 60 Joules (J)

Therefore, the work done by the force in compressing the spring is 60 Joules (J).

Answer: An object's velocity can be different from its average velocity when the object's velocity is changing over time.

Average velocity is calculated by dividing the total displacement of an object by the total time taken. It represents the overall motion of an object during a given time interval. If the object's velocity remains constant during that time interval, then its velocity and average velocity will be the same.

However, if the object's velocity is not constant and changes during the given time interval, then its velocity at any specific moment may be different from its average velocity. This occurs when the object's speed or direction changes at different points in time, resulting in variations in its instantaneous velocity.

To summarize, an object's velocity can differ from its average velocity when there are changes in its speed or direction during the time interval under consideration

The external force acting on the artillery shell is 2970 x 10⁴N, which is same as the force exerted by the shell on the ship. Both acts in the opposite directions.

Mass of the artillery shell, m = 1350

Acceleration of the artillery shell, a = 2.2 x 10⁴ m/s²

a) The mass of an object is inversely proportional to its acceleration, which is directly proportional to the net force acting onto it.

A moving object accelerates more quickly as the force pushing on it increases. A decline in acceleration is observed when the mass of the object increases.

So, the external force acting on the artillery shell is,

F = ma

F = 1350 x 2.2 x 10⁴

F = 2970 x 10⁴N

b) According to Newton's third law, the magnitude of force exerted by the shell on the ship will be equal to 2970 x 10⁴N, but it will be acting in the opposite direction.

To learn more about force, click:

https://brainly.com/question/30959077

#SPJ1