You are standing on a moving bus, facing forward. You suddenly fall backwards. You can imply from this that the bus's __.

A jumbo jet can fly its whole length in 20 seconds at a certain speed and has a 284-foot length. The big jet taxied completely past a 710-foot-long hangar in 70 seconds while travelling at the same speed.

In physics, you can get average speed by dividing the total distance travelled by the total time needed to travel that distance. Speed is the rate of change in an object's position, expressed in metres per second. The rate at which an object travels a distance is considered its speed. High speed describes an object that is travelling quickly.

P should represent the plane's length in feet.

20p = (710+p)/20p = 14200+20p 50p = 14200 p = 284ft

Learn more about speed here

https://brainly.com/question/28224010

#SPJ4

In order to hit the target, the archer should aim the arrow so that it follows a parabolic trajectory.

The archer should aim the arrow slightly higher than the target, so that the arrow will arc downward and reach the target. Additionally, the archer should take into account other factors such as wind speed and direction, as these can affect the trajectory of the arrow.

The parabolic trajectory is a curve created when an object is thrown or shot in the air at an angle, then follows the path of a parabola. The parabolic trajectory allows for the object to travel in an arc and reach a certain distance, such as a target.

Learn more about parabolic trajectory:

https://brainly.com/question/28958414

#SPJ4

As stated in the preceding statement When braking, an automobile experiences an average force of 5,145.8 N.

An object is considered to have been pushed if its velocity changes. Depending on whether an item is moving faster, slower, or in a new direction, its velocity may change. Examples of acceleration include a falling fruit, the moon orbiting the earth, and an automobile that has stopped at a stop sign.

v = v o + a t  ( the acceleration will be negative )

9.50 = 16.0 + a * 1.2

a * 1.2 = -16.0 + 9.50

a * 1.2 = - 6.5

a = - 6.5 : 1.2

a = - 5.4167 m/s²

F = m * a

950 kg * 5.4167 m/s²

F = 5,145.8 N ( the average force exerted on a car during braking )

Learn more about Acceleration from given link

brainly.com/question/605631

#SPJ4

The net force acting on the box, and the frictional force acting backward is 25 N

Here,

mass ,m = 12 Kg

F1 = 49 N

a = 2 m/s^2

Using the second law of motion

net force on the particle = m * a

net force on the particle = 12 * 2

the net force on the particle = 24 N

let the frictional force is f

F1 - f = Fnet

49 - f = 24

f = 25 N

The vector sum of all forces acting on an object is known as the net force. As a result of the fact that a force is a vector and that two forces with identical magnitudes and opposing directions cancel each other out, the net force is the sum of all the forces, or put another way, the net force is the sum of all the forces.

to know more about net force here:

brainly.com/question/29261584

#SPJ4

The object travelled 63 meters at 9m/s for 7 seconds.

The length of the trajectory taken between the initial and final positions of the moving body is the distance traveled.

To calculate the distance traveled by an object traveling horizontally off a cliff, you can use the formula:

d = v * t

where d is the distance traveled, v is the velocity (9 m/s), and t is the time (7 seconds).

By substituting the given values into the formula, we get:

d = 9 * 7 = 63 meters

So, the object traveled 63 meters horizontally before it hit the ground after being launched off the cliff at 9 m/s for 7 seconds.

To know more about distance, visit:

brainly.com/question/13034462

#SPJ1

The average angular acceleration has a value of 0.74 rad/s2.

Applying a force tangential to the rim and in the direction of the instantaneous velocity of the piece of the rim you are applying the force to will most likely increase the angular speed. Reversing the direction of the force will slow down the angular speed.

(rad/s)/s or rad/s2 are the units of angular acceleration. If rises, is a positive number. is negative if it decreases. Remember that the positive direction is counterclockwise and the negative direction is clockwise.

F = m r α . τ=mr2α. τ = m r 2 α

initial rotaton speed=10rad/s

final speed=6.3rad/s

time=5sec.

α=(10-6.3)/5 =.74rad/s

To know more about angular acceleration visit:-

https://brainly.com/question/14769426

#SPJ4

Dynamic stretching is typically recommended for individuals preparing for physical activity.

Dynamic stretching involves movements that gradually increase in range of motion and muscle length, such as arm swings, leg swings, and torso twists.

These exercises help to improve flexibility, range of motion, and muscular coordination, as well as increase blood flow to the muscles to prepare them for activity. Static stretching is best done after the activity to help reduce muscle soreness and keep the muscles flexible.

Learn more about Dynamic stretching:

https://brainly.com/question/1484910

#SPJ4

The mass of the pilot flying a small plane is 75.74 kg.

Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.

Speed of the small plane: v = 130 m/s.

Radius of circular path: r = 400 meter.

Hence, centripetal acceleration: a = v²/r = (130)²/400  m/s² = 42.25 m/s²

Required force: F = 3200 N.

Hence, from Newton's 2nd law of motion:

The pilot's mass  = force/acceleration

= 3200/42.25 kg

= 75.74 kg.

Learn centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ1

In the past eight years, there has been a 3% annual drop in the prevalence of stunting among Indian tribal children under the age of five.

To determine the predictors of stunting and severe stunting among tribal children, as well as to suggest potential policy and program implications, cross-sectional data from 1000 children (287 tribal and 713 non-tribal) aged 0-23 months from Odisha's Rapid Survey of Children (RSOC, 2014) were analyzed. The findings indicate that birth order and maternal illiteracy are significant predictors of childhood stunting, and that maternal age at marriage and at birth was less than 18 years old and less than 20 years old, respectively, for severe stunting. Basic factors such as poverty and maternal ages of 20 years at the time of the first birth and 18 years at marriage were found to predict severe stunting in tribal children.

Learn more about cross-sectional here-

https://brainly.com/question/14077757

#SPJ4

The characteristics which I would suggest are the planet should be dense, solid and located near star.

All the eight planets of the solar system move around the sun in fixed paths. These paths are elongated. They are called orbits. Mercury is nearest to the sun. It takes only about 88 days to complete one round along its orbit.

Venus is considered as ‘Earth’s-twin’ because its size and shape are very much similar to that of the earth.

Till recently (August 2006), Pluto was also considered a planet. However, in a meeting of the International Astronomical Union, a decision was taken that Pluto like other celestial objects (Ceres, 2003 UB313) discovered in recent past may be called ‘dwarf planets.

To know more about planets here

https://brainly.com/question/734965

#SPJ4

The force of gravity that Saturn (mass = 5. 7 x 1026 kg) exerts on a woman on Earth (mass = 61 kg) when Saturn is closest to Earth = 1. 2 x 10° km. ​

Formula used in step two. F = G m 1 m 2 r 2. Step 3: Determine the gravitational force.

Calculating the gravitational force is step three. F = 6.7 10 11 by changing the values in the formula above. 2 × 10 30 × 6 × 10 24 1 .5 × 10 11 2 F = 3 .

The formula for the gravitational constant of the universe is G = 6.674 x 10 - 11 m3/kg s2. Thus, this is the gravitational pull of the sun on the planet.

F = Gm1m2R2, where G is the gravitational constant of the universe. The gravitational force between two bodies of equal mass that are kept at an equal distance from one another constitutes the universal gravitational constant.

To learn more about gravity visit:

brainly.com/question/14874038

#SPJ4

The correct option is C. β-sheet type of protein secondary structure does the structure shown here (Figure 1) represent.

A shape is an arrangement and organization of interrelated elements in a fabric item or gadget, or the item or system so prepared. material systems encompass guy-made items consisting of homes and machines and natural items which include organic organisms, minerals, and chemical compounds. abstract structures consist of statistics structures in pc science and musical shape.

Sorts of the shape include a hierarchy (a cascade of one-to-many relationships), a network providing many-to-many links, or a lattice presenting connections among additives that can be pals in space.

Built structures are widely divided by using their various design approaches and requirements, into classes together with constructing systems, architectural structures, civil engineering structures, and mechanical structures.

To learn more about Structure visit here:

brainly.com/question/10730450

#SPJ4

Complete Question:

What type of protein secondary structure does the structure is shown here (Figure 1) represent?

A). α-helix

B). α-sheet

C). β- helix

D). β-sheet

E). γ turn

The increasing axon diameter increase the conduction velocity conduction in resistance capacitance because of the possibility of smooth movement of electrons in the capacitor and the smooth flow of charges in it that supports the electric current to flow in a smooth manner.

Capacitor is a body which is used to store the electricity in it and we can use it in the time when we need it in the circuit. also we can use the capacitor in the jumping the charge and electricity from the spark gap in the circuit to attain a good height and velocity as we needed it. by this information we can primarily consider that the increasing axon diameter increase the conduction velocity conduction in resistance capacitance because of the possibility of smooth movement of electrons in the capacitor and the smooth flow of charges in it that supports the electric current to flow in a smooth manner.

Learn more about capacitance:

brainly.com/question/12644355

#SPJ4

According to the question the rotational kinetic energy of a 12-kg motorcycle wheel is 809.14 J

The SI unit for rotational kinetic energy is the joule (J). The rotating kinetic energy formula has a similar structure to a translational kinetic energy equation. Kinetic energy is created by spinning objects around an axis. This type of energy is influenced by the object's mass, weight, and center of mass angle with respect to the axis.

Given data -

Mass = 12-kg

Angular velocity (ω) -120rad/s

inner radius = 0.280 m

outer radius = 0.330 m.

By using the formula

I = ½*M (r1² + r2²)

I = ½ *(12) * (0.2802 + 0.3302)

I = 1.1238 Kgm2

K.E = ½*Iω2

K.E = ½ * (1.1238)*(120)2

K.E = 809.14 J

To know more about rotational kinetic energy visit :-

https://brainly.com/question/30079962

#SPJ4

Answer:

at warm fronts where two meet and interact

Explanation:

Warm fronts often bring stormy weather as the warm air mass at the surface rises above the cool air mass, making clouds and storms

ps. I'm not very sure if it's correct

The benefits of dynamic exercises before playing volleyball and how they will prepare your body for the match are:

Learn more about dynamic stretching:

https://brainly.com/question/24842019

#SPJ4

The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.

Velocity is the direction at which an object is moving and serves as a measure of the rate at which its position is changing as seen from a specific point of view and as measured by a specific unit of time (for example, 60 km/h northbound).

By dividing the amount of time it took the object to go a certain distance by the overall distance, one can calculate the object's initial velocity. V is the velocity, d is the distance, and t is the time in the equation V = d/t.

An object's velocity can alter depending on whether it moves faster or slower or in a different direction. An object can move faster, slower, or remain stationary by being pushed or pulled in one direction or the other. Or to put it another way, a thing moves because of a force. Gravity and friction both act as sorts of forces that affect how an object moves.

Therefore, the correct answers are:

a) 75 m/s

b) 1.4 x 103m/s2

c) 2.8 x 103N

d) 75 m/s tangential object flight.

To learn more about velocity refer to:

https://brainly.com/question/25749514

#SPJ1

Add the x- and y-component squared values together, then take the square root of the result to determine the force's magnitude.

The distance between a vector's starting point P and ending point Q is its magnitude. The magnitude of PQ is represented symbolically as | PQ |. The Distance Formula can be used to determine a vector's magnitude if its start and end points' coordinates are known. We must add together all the forces acting on the item in the x and y directions in order to calculate the net gravitational force. The square root of the sum of the squares of these two values is then used to calculate.

Learn more about gravitational here-

https://brainly.com/question/3009841

#SPJ4

The mass of water displaced when the mass of bird bone in water and air is given, is calculated to be 43.4 g.

Given that,

Weight of bird bone in air = True weight = 47 g

Apparent weight of the bird bone when submerged = 3.6 g

The equation for apparent weight is known to be,

Apparent weight = True weight - Buoyant force

Making Buoyant force as subject, we have,

Buoyant force = 47 g - 3.6 g = 43.4 g

F b = mw × g = (m wat - m air)× g

mw = m wat - m air = 47 g - 3.6 g = 43.4 g

Thus, the mass of the water displaced is 43.4 g.

To know more about mass:

https://brainly.com/question/13073054

#SPJ4

The first one is based on the fundamental definition of velocity that employs the widely used velocity equation.

The second approach determines the amount of velocity change brought on by acceleration over a given period of time.

Finally, the average velocity formula is used in the third section of the velocity calculator, which may be helpful if you need to examine trips with varying speeds across different distances.

According to the definition of velocity, it is the rate at which an object's position changes over time. Consideration of body motion is one of the fundamental ideas in classical mechanics.

Therefore, The first one is based on the fundamental definition of velocity that employs the widely used velocity equation.

To learn more about Velocity, refer to the link:

https://brainly.com/question/18084516

#SPJ1

Kinetic energy: A) 1250 J: Velocity = √(2*1250/108) = 8.2 m/s, D) 1.2 kj: Velocity = √(2*1200/108) = 82 m/s and G) 90 kj: Velocity = √(2*90000/108) = 819 m/s.

Kinetic energy is the energy of motion. It is the energy an object has due to its motion. Kinetic energy can be calculated by multiplying half of an object's mass by the square of its velocity. Kinetic energy is a form of energy that is transferred between objects due to their motion. It is the energy of a moving object and is equal to the work done to accelerate the object from rest to its current velocity. Kinetic energy is associated with the motion of an object and is proportional to the square of its velocity. Kinetic energy is a form of energy that is associated with the motion of an object. It is the energy of a moving object and is equal to the work done to accelerate the object from rest to its current velocity.

To learn more about Kinetic energy
https://brainly.com/question/25959744
#SPJ1

The height will the ball rise when a 0.50-kilogram ball is thrown upward is 5.1 meters.

Given,

Mass = 0.5 kg

Kinetic energy = 25 joules

Potential energy = mgh = 25

                              = 0.5 × 9.8 × h = 25

                               = 5.1 meters

In general, the work done by a force on an object between two points does depend on the path taken by the object between the two points. For the special case of conservative forces, we have seen that the work does not depend on the path.

Therefore, we can define, for conservative forces, an associated potential energy that, for a given object, depends only on its location. In particular, when a conservative force acts on an object as it moves between two points, we define the define the change in potential  energy associated with that force as minus the work done by that force between those two  points.

kinetic energy of the ball was equal to the work done by the gravitational force. By our definition, the change in gravitational potential energy is equal to minus the work done by the gravitational force.

To know more about energy here

https://brainly.com/question/13881533

#SPJ4

It is a passive stretch if it depends on an outside force. Stretches that are passive and static are a fantastic technique to increase flexibility and can also be utilised to cool down.

Passive stretching, which is called a static stretch, is a technique in which you remain calm and do not add to the range of motion. Static stretching involves stretching all the way to the end and holding the stretch. An external force, like a partner, is instead produced by an external force.

This stretching technique relies on a prop, accessory, or partner to help increase the stretch, thus you aren't actively assisting in extending your range of motion. Passive stretches improve flexibility while reducing muscle soreness and tiredness after a workout.

Stretching with movement is known as dynamic stretching. It stretches the muscles by using the muscles themselves. The usual "static" stretching is not like this.

To learn more about static stretching refer to:

https://brainly.com/question/10238897

#SPJ4

The final speed of the astronaut after throwing the oxygen tank can be calculated using the conservation of momentum principle.

This principle states that the total momentum of an isolated system remains constant if no external forces act on the system.The momentum of the oxygen tank is given by the equation.

p_t = m_t*vThe conservation of momentum principle states that the initial momentum of the system is equal to the final momentum of the system.

p_i = p_f

The final momentum of the system is the momentum of the astronaut-tank system after the astronaut throws the tank.

p_f = (m_a + m_t)v_f = (64.5 + 12) * v_f = 76.5 * v_f

So the final momentum of the system is equal to the momentum of the oxygen tank.

p_t = m_tv = 1214.9 = 178.8We can set the two equations equal to each other and solve for v_f

178.8 = 76.5 * v_f

v_f = 178.8 / 76.5

v_f = 2.33 m/s

To learn more about oxygen here:

https://brainly.com/question/13370320

#SPJ4

The relationship between mass thermal energy transfer kinetic energy and temperature is: When the temperature of an object raises, the average kinetic energy of its particles raises. When the average kinetic energy of its particles raises, the object's thermal energy raises.

The thermal energy in a substance is the whole kinetic energy of all the particles in the substance. If we warm a substance or object, as each particle speeds up, the average speed of the particles (temperature) raises, and accordingly the total speed (kinetic energy) of the particles (thermal energy).

The total of heat transferred is also directly proportional to the mass. To make an equivalent temperature change in a doubled mass, we need to add twice the heat.

Learn more about thermal energy at: https://brainly.com/question/18989562

#SPJ4

The correct answer to the given question is -6.944 * 10^-28 Joules

a. To find the electron's initial speed, we can use the conservation of energy. The initial kinetic energy of the electron must equal the final potential energy of the electron at its closest approach to the sphere.

Ki = 1/2 * me * v^2

v = sqrt(2Ki/me)

Ki = qe * V = (1.6 x 10^-19 C) * (-4.4 x 10^-9 C) = -6.944 x 10^-28 J

b. At the point where the speed of the electron is half of its initial value, the kinetic energy of the electron is half of its initial value. Therefore,

Ki/2 = 1/2 * me * (v/2)^2

we can solve for the distance from the surface of the sphere using the same equation as in part a, and substituting Ki/2 and v/2 for Ki and v respectively

c. The acceleration of the electron at its turning point can be found using the equation for centripetal acceleration:

a = v^2/r

where a is the acceleration, v is the speed of the electron, and r is the distance of the electron from the center of the sphere at its closest approach. We can use the value of v from part a and the distance from part b to find the acceleration.

Read more about Kinetic Energy from:

https://brainly.com/question/26472013

#SPJ4

"A notch is a distortion in a voltage waveform where the voltage quickly drops toward zero and then returns to the correct value."

In general, the primary overcurrent device is not considered to safeguard transformer secondary wires. Transformers with two windings are all isolation transformers.

A voltage waveform distortion known as notching is brought on by intense current bursts of very short duration. These distortions generally show up graphically as a notch in the waveform's time domain representation.

When current commutates from one phase to another during normal operation of power electronic devices, a sort of periodic waveform distortion called voltage notching is created. The most significant instance of voltage notching occurs in three-phase converters. The transition of the current from one phase to another causes the notches.

To know more about waveforms:

https://brainly.com/question/12274974

#SPJ4

Answer:33Ns

Explanation:

The work or a task that I'd like to make easier by using a device or tool is sweeping the floor without bending down through the use of a vacuum cleaner.

This is referred to as a mechanical or electronic equipment which is made or adapted for a particular purpose and makes work easier and faster through technological advancement.

In the case of sweeping the floor without bending down, a vacuum cleaner is most appropriate as it uses an electric motor that spins a fan, thereby resulting in the sucking in of air and any small particles caught up in it thereby making it the correct device to be used.

Read more about Device here https://brainly.com/question/28498043

#SPJ1

Based on the graph;

The work done by friction as the block travels from x =-0.04 to x = −0.02 m is 0.01 J.

The force exerted on the block by the spring at x = −0.02 m is 1 N.

The stiffness of a spring is indicated by the spring constant, k. For various springs and materials, it varies. The stiffer the spring is and the harder it is to stretch, the larger the spring constant. The spring constant is a measure of the spring's stiffness.

The force exerted by a spring of spring constant, k is given below as follows:

F = - kx.

where;

Learn more about spring constant at: https://brainly.com/question/23885190

#SPJ1